TLE8444SLXUMA1 vs TLE82092SAAUMA1 Comparaison
Comparaison détaillée côte à côte de TLE8444SLXUMA1 par Infineon et TLE82092SAAUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
TLE8444SLXUMA1 - Quad Half-Bridge Motor Driver, 24V, AEC-Q100 | Infineon
TLE8444SLXUMA1 ✓ Actif
Comparaison des spécifications
| Paramètre | TLE8444SLXUMA1 | TLE82092SAAUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Motor Drivers | Motor Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,18 | $3,30 |
| Motor Type | Bipolar, Unipolar DC / Stepper | DC motor / solenoid (H-bridge) |
| Topologie | Quad Half-Bridge | H-bridge, two N-channel half-bridges |
| Nombre de sorties | 4 half-bridges | — |
| Supply Voltage (VBB) | 4.5 V to 24 V | — |
| Overcurrent Shutdown | 0.9 A typical per channel | — |
| On-Resistance (RDS(on)) | 1.3 Ohm typical per switch | — |
| Interface | Parallel (direct logic input) | — |
| Technology | SPT BiCDMOS (Bipolar + CMOS + DMOS) | — |
| Température de fonctionnement | -40 C to +150 C junction | -40 C to +150 C (junction) |
| Boîtier | PG-SSOP-24-7 (exposed pad) | PG-DSO-20-65 (20-pin exposed-pad SOIC) |
| Type de montage | Surface Mount | Surface Mount |
| Nombre de broches | 24 | — |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| Statut RoHS | Compliant | Compliant |
| Niveau MSL | [DATA_NEEDED: MSL moisture sensitivity level] | [DATA_NEEDED: MSL rating] |
| Integrated Freewheeling Diodes | Yes | — |
| Diagnostic Features | Open load, short-to-GND, short-to-VBB, overtemperature | Open-load, short-to-GND, short-to-Vbb, over-temperature, under-voltage |
| Undervoltage Lockout | Yes | — |
| Supply Voltage Vbb | — | 5 V to 28 V (40 V transient tolerant) |
| Continuous Load Current | — | 5.5 A |
| Rds(on) per MOSFET (typ) | — | [DATA_NEEDED: Rds(on) per switch] |
| Selectable Current Limit Ranges | — | 4 programmable thresholds |
| Selectable Slew Rate Settings | — | 2 programmable settings |
| Control Interface | — | SPI (up to 5 MHz, daisy-chain capable) |
| Package Dimensions | — | 3.25 mm x 11 mm x 15.9 mm (per Hotenda listing) |
| Process Technology | — | Infineon SMART7 automotive |
| Functional Safety Target | — | ISO 26262 ASIL-B / ASIL-C capable (per datasheet family) |