TLE8444SLXUMA1 vs TLE82092SAAUMA1 비교
다음의 상세 나란히 비교: TLE8444SLXUMA1 제조: Infineon 및 TLE82092SAAUMA1 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Infineon
TLE8444SLXUMA1 - Quad Half-Bridge Motor Driver, 24V, AEC-Q100 | Infineon
TLE8444SLXUMA1 ✓ 활성
사양 비교
| 파라미터 | TLE8444SLXUMA1 | TLE82092SAAUMA1 |
|---|---|---|
| 브랜드 | Infineon | Infineon |
| 카테고리 | Motor Drivers | Motor Drivers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $2.18 | $3.30 |
| Motor Type | Bipolar, Unipolar DC / Stepper | DC motor / solenoid (H-bridge) |
| 토폴로지 | Quad Half-Bridge | H-bridge, two N-channel half-bridges |
| 출력 수 | 4 half-bridges | — |
| Supply Voltage (VBB) | 4.5 V to 24 V | — |
| Overcurrent Shutdown | 0.9 A typical per channel | — |
| On-Resistance (RDS(on)) | 1.3 Ohm typical per switch | — |
| 인터페이스 | Parallel (direct logic input) | — |
| Technology | SPT BiCDMOS (Bipolar + CMOS + DMOS) | — |
| 동작 온도 | -40 C to +150 C junction | -40 C to +150 C (junction) |
| 패키지 | PG-SSOP-24-7 (exposed pad) | PG-DSO-20-65 (20-pin exposed-pad SOIC) |
| 실장 유형 | Surface Mount | Surface Mount |
| 핀 수 | 24 | — |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| RoHS 상태 | Compliant | Compliant |
| MSL 레벨 | [DATA_NEEDED: MSL moisture sensitivity level] | [DATA_NEEDED: MSL rating] |
| Integrated Freewheeling Diodes | Yes | — |
| Diagnostic Features | Open load, short-to-GND, short-to-VBB, overtemperature | Open-load, short-to-GND, short-to-Vbb, over-temperature, under-voltage |
| Undervoltage Lockout | Yes | — |
| Supply Voltage Vbb | — | 5 V to 28 V (40 V transient tolerant) |
| Continuous Load Current | — | 5.5 A |
| Rds(on) per MOSFET (typ) | — | [DATA_NEEDED: Rds(on) per switch] |
| Selectable Current Limit Ranges | — | 4 programmable thresholds |
| Selectable Slew Rate Settings | — | 2 programmable settings |
| Control Interface | — | SPI (up to 5 MHz, daisy-chain capable) |
| Package Dimensions | — | 3.25 mm x 11 mm x 15.9 mm (per Hotenda listing) |
| Process Technology | — | Infineon SMART7 automotive |
| Functional Safety Target | — | ISO 26262 ASIL-B / ASIL-C capable (per datasheet family) |