TLE8444SLXUMA1 vs TLE82092SAAUMA1 比較
詳細な並列比較: TLE8444SLXUMA1 メーカー: Infineon および TLE82092SAAUMA1 メーカー: Infineon。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Infineon
TLE8444SLXUMA1 - Quad Half-Bridge Motor Driver, 24V, AEC-Q100 | Infineon
TLE8444SLXUMA1 ✓ 生産中
仕様比較
| パラメータ | TLE8444SLXUMA1 | TLE82092SAAUMA1 |
|---|---|---|
| ブランド | Infineon | Infineon |
| カテゴリ | Motor Drivers | Motor Drivers |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $2.18 | $3.30 |
| Motor Type | Bipolar, Unipolar DC / Stepper | DC motor / solenoid (H-bridge) |
| トポロジー | Quad Half-Bridge | H-bridge, two N-channel half-bridges |
| 出力数 | 4 half-bridges | — |
| Supply Voltage (VBB) | 4.5 V to 24 V | — |
| Overcurrent Shutdown | 0.9 A typical per channel | — |
| On-Resistance (RDS(on)) | 1.3 Ohm typical per switch | — |
| インターフェース | Parallel (direct logic input) | — |
| Technology | SPT BiCDMOS (Bipolar + CMOS + DMOS) | — |
| 動作温度 | -40 C to +150 C junction | -40 C to +150 C (junction) |
| パッケージ | PG-SSOP-24-7 (exposed pad) | PG-DSO-20-65 (20-pin exposed-pad SOIC) |
| 実装タイプ | Surface Mount | Surface Mount |
| ピン数 | 24 | — |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| RoHS ステータス | Compliant | Compliant |
| MSLレベル | [DATA_NEEDED: MSL moisture sensitivity level] | [DATA_NEEDED: MSL rating] |
| Integrated Freewheeling Diodes | Yes | — |
| Diagnostic Features | Open load, short-to-GND, short-to-VBB, overtemperature | Open-load, short-to-GND, short-to-Vbb, over-temperature, under-voltage |
| Undervoltage Lockout | Yes | — |
| Supply Voltage Vbb | — | 5 V to 28 V (40 V transient tolerant) |
| Continuous Load Current | — | 5.5 A |
| Rds(on) per MOSFET (typ) | — | [DATA_NEEDED: Rds(on) per switch] |
| Selectable Current Limit Ranges | — | 4 programmable thresholds |
| Selectable Slew Rate Settings | — | 2 programmable settings |
| Control Interface | — | SPI (up to 5 MHz, daisy-chain capable) |
| Package Dimensions | — | 3.25 mm x 11 mm x 15.9 mm (per Hotenda listing) |
| Process Technology | — | Infineon SMART7 automotive |
| Functional Safety Target | — | ISO 26262 ASIL-B / ASIL-C capable (per datasheet family) |