TLV9301IDBVR vs TS321ID Comparaison
Comparaison détaillée côte à côte de TLV9301IDBVR par Texas Instruments et TS321ID par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
TLV9301IDBVR - 40V 1MHz RRO Op Amp SOT-23-5 | Texas Instruments
TLV9301IDBVR ✓ Actif
Comparaison des spécifications
| Paramètre | TLV9301IDBVR | TS321ID |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Number of Channels | 1 (Single) | — |
| Topologie | Standard (General Purpose) Op Amp | — |
| Type de sortie | Rail-to-Rail Output (RRO) | — |
| Input Type | CMOS (MUX-friendly, rail-to-rail on positive rail) | — |
| Gain Bandwidth Product (GBW) | 1 MHz | — |
| Slew Rate | [DATA_NEEDED: slew rate V/us] | [DATA_NEEDED: slew rate] |
| Input Offset Voltage (Vos) | ±0.5 mV (typ) | — |
| Input Offset Drift (dVos/dT) | ±2 µV/°C (typ) | — |
| Supply Voltage Range (Single Supply) | 2.7 V to 40 V | — |
| Supply Voltage Range (Split Supply) | ±1.35 V to ±20 V | — |
| Quiescent Current per Channel (Iq) | [DATA_NEEDED: Iq per channel µA/mA] | — |
| Output Current (Short-Circuit) | ±60 mA (typ short-circuit) | — |
| Common-Mode Rejection Ratio (CMRR) | [DATA_NEEDED: CMRR dB] | — |
| Power-Supply Rejection Ratio (PSRR) | [DATA_NEEDED: PSRR dB] | — |
| Plage de température de fonctionnement | -40 °C to +125 °C | -40 °C to +125 °C |
| Boîtier | SOT-23-5 (DBV) | SOIC-8 (D) |
| Type de montage | Surface Mount | Surface mount |
| Niveau MSL | [DATA_NEEDED: MSL level] | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Automotive Grade (AEC-Q100) | Standard grade (AEC-Q100 variants exist in family) | — |
| Product Type | — | Single bipolar operational amplifier |
| Amplifier Circuit Count | — | 1 circuit |
| Maximum Operating Voltage | — | 30 V |
| Gain-Bandwidth Product | — | 800 kHz |
| Nombre de broches | — | 8 pins |
| Amplifier Classification | — | Standard general-purpose amplifier |
| Architecture | — | Bipolar |
| Product Positioning | — | Low-power, cost-sensitive |
| Tension d'alimentation | — | [DATA_NEEDED: supply voltage range] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Output Current | — | [DATA_NEEDED: output current] |
| Noise Voltage | — | [DATA_NEEDED: noise voltage] |
| Common-Mode Input Range | — | [DATA_NEEDED: common-mode input range] |
| Output Swing | — | [DATA_NEEDED: output voltage swing] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |