TLV9301IDBVR vs TS321ID तुलना
विस्तृत दोनों ओर की तुलना TLV9301IDBVR द्वारा Texas Instruments और TS321ID द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
TLV9301IDBVR - 40V 1MHz RRO Op Amp SOT-23-5 | Texas Instruments
TLV9301IDBVR ✓ सक्रिय
विशेषता तुलना
| पैरामीटर | TLV9301IDBVR | TS321ID |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Number of Channels | 1 (Single) | — |
| टोपोलॉजी | Standard (General Purpose) Op Amp | — |
| आउटपुट प्रकार | Rail-to-Rail Output (RRO) | — |
| Input Type | CMOS (MUX-friendly, rail-to-rail on positive rail) | — |
| Gain Bandwidth Product (GBW) | 1 MHz | — |
| Slew Rate | [DATA_NEEDED: slew rate V/us] | [DATA_NEEDED: slew rate] |
| Input Offset Voltage (Vos) | ±0.5 mV (typ) | — |
| Input Offset Drift (dVos/dT) | ±2 µV/°C (typ) | — |
| Supply Voltage Range (Single Supply) | 2.7 V to 40 V | — |
| Supply Voltage Range (Split Supply) | ±1.35 V to ±20 V | — |
| Quiescent Current per Channel (Iq) | [DATA_NEEDED: Iq per channel µA/mA] | — |
| Output Current (Short-Circuit) | ±60 mA (typ short-circuit) | — |
| Common-Mode Rejection Ratio (CMRR) | [DATA_NEEDED: CMRR dB] | — |
| Power-Supply Rejection Ratio (PSRR) | [DATA_NEEDED: PSRR dB] | — |
| ऑपरेटिंग तापमान रेंज | -40 °C to +125 °C | -40 °C to +125 °C |
| पैकेज | SOT-23-5 (DBV) | SOIC-8 (D) |
| माउंटिंग प्रकार | Surface Mount | Surface mount |
| MSL स्तर | [DATA_NEEDED: MSL level] | — |
| RoHS स्थिति | Compliant | [DATA_NEEDED: RoHS status] |
| Automotive Grade (AEC-Q100) | Standard grade (AEC-Q100 variants exist in family) | — |
| Product Type | — | Single bipolar operational amplifier |
| Amplifier Circuit Count | — | 1 circuit |
| Maximum Operating Voltage | — | 30 V |
| Gain-Bandwidth Product | — | 800 kHz |
| पिन काउंट | — | 8 pins |
| Amplifier Classification | — | Standard general-purpose amplifier |
| Architecture | — | Bipolar |
| Product Positioning | — | Low-power, cost-sensitive |
| सप्लाई वोल्टेज | — | [DATA_NEEDED: supply voltage range] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Output Current | — | [DATA_NEEDED: output current] |
| Noise Voltage | — | [DATA_NEEDED: noise voltage] |
| Common-Mode Input Range | — | [DATA_NEEDED: common-mode input range] |
| Output Swing | — | [DATA_NEEDED: output voltage swing] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |