TLV9301IDBVR vs TS321ID Comparación
Comparación detallada lado a lado de TLV9301IDBVR por Texas Instruments y TS321ID por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
TLV9301IDBVR - 40V 1MHz RRO Op Amp SOT-23-5 | Texas Instruments
TLV9301IDBVR ✓ Activo
Comparación de especificaciones
| Parámetro | TLV9301IDBVR | TS321ID |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Number of Channels | 1 (Single) | — |
| Topología | Standard (General Purpose) Op Amp | — |
| Tipo de salida | Rail-to-Rail Output (RRO) | — |
| Input Type | CMOS (MUX-friendly, rail-to-rail on positive rail) | — |
| Gain Bandwidth Product (GBW) | 1 MHz | — |
| Slew Rate | [DATA_NEEDED: slew rate V/us] | [DATA_NEEDED: slew rate] |
| Input Offset Voltage (Vos) | ±0.5 mV (typ) | — |
| Input Offset Drift (dVos/dT) | ±2 µV/°C (typ) | — |
| Supply Voltage Range (Single Supply) | 2.7 V to 40 V | — |
| Supply Voltage Range (Split Supply) | ±1.35 V to ±20 V | — |
| Quiescent Current per Channel (Iq) | [DATA_NEEDED: Iq per channel µA/mA] | — |
| Output Current (Short-Circuit) | ±60 mA (typ short-circuit) | — |
| Common-Mode Rejection Ratio (CMRR) | [DATA_NEEDED: CMRR dB] | — |
| Power-Supply Rejection Ratio (PSRR) | [DATA_NEEDED: PSRR dB] | — |
| Rango de temperatura de funcionamiento | -40 °C to +125 °C | -40 °C to +125 °C |
| Encapsulado | SOT-23-5 (DBV) | SOIC-8 (D) |
| Tipo de montaje | Surface Mount | Surface mount |
| Nivel MSL | [DATA_NEEDED: MSL level] | — |
| Estado RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Automotive Grade (AEC-Q100) | Standard grade (AEC-Q100 variants exist in family) | — |
| Product Type | — | Single bipolar operational amplifier |
| Amplifier Circuit Count | — | 1 circuit |
| Maximum Operating Voltage | — | 30 V |
| Gain-Bandwidth Product | — | 800 kHz |
| Recuento de pines | — | 8 pins |
| Amplifier Classification | — | Standard general-purpose amplifier |
| Architecture | — | Bipolar |
| Product Positioning | — | Low-power, cost-sensitive |
| Tensión de alimentación | — | [DATA_NEEDED: supply voltage range] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Output Current | — | [DATA_NEEDED: output current] |
| Noise Voltage | — | [DATA_NEEDED: noise voltage] |
| Common-Mode Input Range | — | [DATA_NEEDED: common-mode input range] |
| Output Swing | — | [DATA_NEEDED: output voltage swing] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |