TPS4H000BQPWPRQ1 vs BTS5215LAUMA1 Comparaison
Comparaison détaillée côte à côte de TPS4H000BQPWPRQ1 par Texas Instruments et BTS5215LAUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | TPS4H000BQPWPRQ1 | BTS5215LAUMA1 |
|---|---|---|
| Marque | Texas Instruments | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,15 | $1,18 |
| Product Type | Quad-channel smart high-side switch | Smart High-Side Power Switch |
| Number of Channels | 4 | 2 |
| Supply Voltage Range | 3.4 V to 40 V | — |
| On-Resistance (per channel) | 1000 mOhm (typical) | — |
| Rated Output Current (per channel) | 750 mA | — |
| Limitation de courant | External, adjustable | — |
| Current Sense | High-accuracy, multiplexed via CS pin | — |
| Diagnostics | Open-load, short-circuit, thermal, full fault reporting | — |
| Control Inputs | IN1, IN2, IN3, IN4, SEL | — |
| Qualification | AEC-Q100 qualified (automotive) | — |
| Boîtier | 20-pin HTSSOP (PWP) with exposed pad | PG-DSO-12-9 |
| Type de montage | Surface Mount | — |
| Power FET Type | Integrated NMOS with internal charge pump | — |
| Target Rails | 12-V and 24-V automotive/industrial | — |
| Protection | Overload, thermal shutdown, output clamp | — |
| Statut RoHS | Compliant | Compliant |
| On-State Resistance (RDS(on)) | — | 90 mΩ typical per channel |
| Continuous Output Current per Channel | — | 3.7 A |
| Operating Voltage Range | — | 8 V to 36 V |
| Standby Current | — | Very low (datasheet value [DATA_NEEDED: standby current uA]) |
| Input Logic Compatibility | — | CMOS-compatible, ground-referenced |
| Diagnostic Feedback | — | Status feedback per channel |
| MOSFET Technology | — | N-channel vertical power MOSFET with charge pump |
| Load Type Support | — | Resistive and inductive loads |
| Protection Features | — | Overcurrent, overtemperature, overvoltage, short-circuit, undervoltage |
| Demagnetization | — | Fast demagnetization of inductive loads |
| Température de fonctionnement | — | -40C to +150C (TJ) [DATA_NEEDED: ambient range exact] |