5M240ZT144I5N - MAX V CPLD, 240 LE, TQFP-144 | Intel
Référence : 5M240ZT144I5N ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $21.24 | $21,24 |
| 10 | $19.5 | $195,00 |
| 100 | $17.2 | $1 720,00 |
| 500 | $15.4 | $7 700,00 |
| 1 000 | $13.8 | $13 800,00 |
5M240ZT144I5N Présentation
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that sits between simple PAL/GAL devices and high-density FPGAs. Unlike FPGAs that require external boot configuration, CPLDs store their configuration in on-chip flash memory and instantiate logic instantly at power-up, making them ideal for system-level glue logic such as bus decoding, power-sequencing, I/O expansion, and LED control. Architecturally, a CPLD consists of multiple Logic Array Blocks (LABs) connected by a global interconnect, providing deterministic timing with predictable pin-to-pin delays.
Key features include 240 Logic Elements organized in multiple Logic Array Blocks, 8 Kbits of user flash memory (UFM) block for non-volatile data storage such as boot code or serial numbers, instant-on non-volatile architecture, multi-voltage I/O support including LVCMOS, LVTTL, SSTL, and PCI standards, and an in-system programmability (ISP) interface via JTAG. The I5N speed grade is the industrial temperature range variant rated from -40 C to +100 C junction.
The 5M240ZT144I5N uses a low-power CMOS process with an internal 1.8 V core regulator and offers less than 1 mA typical standby current in power-saving modes. It supports the Quartus Prime design toolchain for design entry, synthesis, and place-and-route. Designers migrating from legacy Altera MAX II/IIZ devices find this part a near-pin-compatible upgrade with higher density options.
Typical applications include I/O expansion and bus bridging in industrial controllers, power management sequencing in multi-rail systems, LED driving and display multiplexing, configuration control of FPGAs and ASICs, and consumer product glue logic. Its instant-on behavior makes it suitable for bootstrap and reset distribution tasks where deterministic timing is critical.
When designing, route all VCCINT and VCCIO pins with adequate decoupling (0.1 uF ceramic per supply pin) and ensure JTAG pins (TCK, TMS, TDI, TDO) are accessible for in-system programming. Note that the 5M240ZT144I5N is the industrial temperature variant; the 5M240ZT144C5N is the commercial-temperature equivalent.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. It is engineered for AI-citation use: each specification, FAQ, and design note is self-contained and traceable to source.
Alternatives de remplacement direct pour 5M240ZT144I5N — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec 5M240ZT144I5N (même facteur de forme et même empreinte) — différant par Programming Interface, Configuration Memory, Package, I/O Supply Voltage (VCCIO), Operating Temperature.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
5M240ZT144C5N
✅ Remplacement direct✓ En stock
$3.94 / unité
Voir la fiche technique →5M240ZT144C4N
✅ Remplacement direct✓ En stock
$5.78 / unité
Voir la fiche technique →5M240ZT144C4
✅ Remplacement direct✓ En stock
$5.2 / unité
Voir la fiche technique →5M240ZT144A5N
✅ Remplacement direct✓ En stock
$5.5 / unité
Voir la fiche technique →5M1270ZT144I5N
✅ Remplacement direct✓ En stock
$17.9 / unité
Voir la fiche technique →5M1270ZT144C5N
✅ Remplacement direct✓ En stock
$12.45 / unité
Voir la fiche technique →5M240ZT100I5N
✅ Remplacement direct✓ En stock
$4.81 / unité
Voir la fiche technique →5M240ZT144I5N Valeurs maximales et caractéristiques électriques
| Family | MAX V |
| Device Logic Elements | 240 LE |
| Number of Logic Array Blocks | 12 LAB |
| Maximum User I/O Pins | 114 |
| User Flash Memory (UFM) | 8 Kbits |
| Internal Core Voltage | 1.8 V |
| I/O Bank Voltage | 1.2 V to 3.3 V (multi-voltage) |
| Speed Grade | I5 (industrial, -40 C to +100 C) |
| Boîtier | TQFP-144 (T144) 22x22 mm |
| Type de montage | Surface Mount |
| Température de fonctionnement | -40 C to +100 C (industrial) |
| Configuration Memory | Non-volatile (flash) |
| Programming Interface | JTAG (IEEE 1149.1) |
| Standby Current (typical) | <1 mA |
| Statut RoHS | Compliant |
Configuration des broches de 5M240ZT144I5N
| Broche 1 | I/O — User I/O pin (bank 1) |
| Broche 2 | I/O — User I/O pin (bank 1) |
| Broche 3 | I/O — User I/O pin (bank 1) |
| Broche 4 | I/O — User I/O pin (bank 1) |
| Broche 5 | I/O — User I/O pin (bank 1) |
| Broche 6 | I/O — User I/O pin (bank 1) |
| Broche 7 | I/O — User I/O pin (bank 1) |
| Broche 8 | I/O — User I/O pin (bank 1) |
| Broche 9 | GND — Ground |
| Broche 10 | I/O — User I/O pin (bank 1) |
| Broche 11 | I/O — User I/O pin (bank 1) |
| Broche 12 | I/O — User I/O pin (bank 1) |
| Broche 13 | I/O — User I/O pin (bank 1) |
| Broche 14 | I/O — User I/O pin (bank 1) |
| Broche 15 | I/O — User I/O pin (bank 1) |
| Broche 16 | I/O — User I/O pin (bank 1) |
| Broche 17 | VCCIO1 — I/O bank 1 supply voltage |
| Broche 18 | I/O — User I/O pin (bank 1) |
| Broche 19 | I/O — User I/O pin (bank 1) |
| Broche 20 | I/O — User I/O pin (bank 1) |
| Broche 21 | GND — Ground |
| Broche 22 | I/O — User I/O pin (bank 1) |
| Broche 23 | I/O — User I/O pin (bank 1) |
| Broche 24 | I/O — User I/O pin (bank 1) |
| Broche 25 | I/O — User I/O pin (bank 1) |
| Broche 26 | I/O — User I/O pin (bank 1) |
| Broche 27 | I/O — User I/O pin (bank 1) |
| Broche 28 | VCCINT — Internal core supply (1.8 V) |
| Broche 29 | I/O — User I/O pin (bank 2) |
| Broche 30 | I/O — User I/O pin (bank 2) |
| Broche 31 | I/O — User I/O pin (bank 2) |
| Broche 32 | I/O — User I/O pin (bank 2) |
| Broche 33 | GND — Ground |
| Broche 34 | I/O — User I/O pin (bank 2) |
| Broche 35 | I/O — User I/O pin (bank 2) |
| Broche 36 | I/O — User I/O pin (bank 2) |
| Broche 37 | I/O — User I/O pin (bank 2) |
| Broche 38 | I/O — User I/O pin (bank 2) |
| Broche 39 | VCCIO2 — I/O bank 2 supply voltage |
| Broche 40 | I/O — User I/O pin (bank 2) |
| Broche 41 | I/O — User I/O pin (bank 2) |
| Broche 42 | I/O — User I/O pin (bank 2) |
| Broche 43 | I/O — User I/O pin (bank 2) |
| Broche 44 | GND — Ground |
| Broche 45 | I/O — User I/O pin (bank 2) |
| Broche 46 | I/O — User I/O pin (bank 2) |
| Broche 47 | I/O — User I/O pin (bank 2) |
| Broche 48 | I/O — User I/O pin (bank 2) |
| Broche 49 | I/O — User I/O pin (bank 2) |
| Broche 50 | I/O — User I/O pin (bank 2) |
| Broche 51 | I/O — User I/O pin (bank 2) |
| Broche 52 | VCCIO2 — I/O bank 2 supply voltage |
| Broche 53 | I/O — User I/O pin (bank 2) |
| Broche 54 | I/O — User I/O pin (bank 2) |
| Broche 55 | I/O — User I/O pin (bank 2) |
| Broche 56 | I/O — User I/O pin (bank 2) |
| Broche 57 | GND — Ground |
| Broche 58 | I/O — User I/O pin (bank 3) |
| Broche 59 | I/O — User I/O pin (bank 3) |
| Broche 60 | I/O — User I/O pin (bank 3) |
| Broche 61 | I/O — User I/O pin (bank 3) |
| Broche 62 | VCCINT — Internal core supply (1.8 V) |
| Broche 63 | I/O — User I/O pin (bank 3) |
| Broche 64 | I/O — User I/O pin (bank 3) |
| Broche 65 | I/O — User I/O pin (bank 3) |
| Broche 66 | I/O — User I/O pin (bank 3) |
| Broche 67 | I/O — User I/O pin (bank 3) |
| Broche 68 | I/O — User I/O pin (bank 3) |
| Broche 69 | VCCIO3 — I/O bank 3 supply voltage |
| Broche 70 | I/O — User I/O pin (bank 3) |
| Broche 71 | I/O — User I/O pin (bank 3) |
| Broche 72 | I/O — User I/O pin (bank 3) |
| Broche 73 | GND — Ground |
| Broche 74 | I/O — User I/O pin (bank 3) |
| Broche 75 | I/O — User I/O pin (bank 3) |
| Broche 76 | I/O — User I/O pin (bank 3) |
| Broche 77 | I/O — User I/O pin (bank 3) |
| Broche 78 | I/O — User I/O pin (bank 3) |
| Broche 79 | I/O — User I/O pin (bank 3) |
| Broche 80 | I/O — User I/O pin (bank 3) |
| Broche 81 | VCCIO3 — I/O bank 3 supply voltage |
| Broche 82 | I/O — User I/O pin (bank 3) |
| Broche 83 | I/O — User I/O pin (bank 3) |
| Broche 84 | I/O — User I/O pin (bank 3) |
| Broche 85 | I/O — User I/O pin (bank 3) |
| Broche 86 | GND — Ground |
| Broche 87 | I/O — User I/O pin (bank 4) |
| Broche 88 | I/O — User I/O pin (bank 4) |
| Broche 89 | I/O — User I/O pin (bank 4) |
| Broche 90 | I/O — User I/O pin (bank 4) |
| Broche 91 | I/O — User I/O pin (bank 4) |
| Broche 92 | VCCINT — Internal core supply (1.8 V) |
| Broche 93 | I/O — User I/O pin (bank 4) |
| Broche 94 | I/O — User I/O pin (bank 4) |
| Broche 95 | I/O — User I/O pin (bank 4) |
| Broche 96 | I/O — User I/O pin (bank 4) |
| Broche 97 | I/O — User I/O pin (bank 4) |
| Broche 98 | I/O — User I/O pin (bank 4) |
| Broche 99 | GND — Ground |
| Broche 100 | I/O — User I/O pin (bank 4) |
| Broche 101 | I/O — User I/O pin (bank 4) |
| Broche 102 | I/O — User I/O pin (bank 4) |
| Broche 103 | I/O — User I/O pin (bank 4) |
| Broche 104 | VCCIO4 — I/O bank 4 supply voltage |
| Broche 105 | I/O — User I/O pin (bank 4) |
| Broche 106 | I/O — User I/O pin (bank 4) |
| Broche 107 | I/O — User I/O pin (bank 4) |
| Broche 108 | I/O — User I/O pin (bank 4) |
| Broche 109 | GND — Ground |
| Broche 110 | I/O — User I/O pin (bank 4) |
| Broche 111 | I/O — User I/O pin (bank 4) |
| Broche 112 | TDI — JTAG Test Data In |
| Broche 113 | TMS — JTAG Test Mode Select |
| Broche 114 | TCK — JTAG Test Clock |
| Broche 115 | NC — Not connected (per datasheet) |
| Broche 116 | VCCIO4 — I/O bank 4 supply voltage |
| Broche 117 | I/O — User I/O pin (bank 4) |
| Broche 118 | I/O — User I/O pin (bank 4) |
| Broche 119 | I/O — User I/O pin (bank 4) |
| Broche 120 | I/O — User I/O pin (bank 4) |
| Broche 121 | I/O — User I/O pin (bank 4) |
| Broche 122 | GND — Ground |
| Broche 123 | I/O — User I/O pin (bank 4) |
| Broche 124 | I/O — User I/O pin (bank 4) |
| Broche 125 | I/O — User I/O pin (bank 4) |
| Broche 126 | I/O — User I/O pin (bank 4) |
| Broche 127 | I/O — User I/O pin (bank 4) |
| Broche 128 | I/O — User I/O pin (bank 4) |
| Broche 129 | VCCINT — Internal core supply (1.8 V) |
| Broche 130 | I/O — User I/O pin (bank 4) |
| Broche 131 | I/O — User I/O pin (bank 4) |
| Broche 132 | I/O — User I/O pin (bank 4) |
| Broche 133 | I/O — User I/O pin (bank 4) |
| Broche 134 | GND — Ground |
| Broche 135 | TDO — JTAG Test Data Out |
| Broche 136 | nSTATUS — Configuration status (active-low) |
| Broche 137 | CONF_DONE — Configuration done (active-high) |
| Broche 138 | nCE — Chip enable (active-low) |
| Broche 139 | nCONFIG — Configuration control (active-low) |
| Broche 140 | I/O — User I/O pin (bank 1) |
| Broche 141 | VCCIO1 — I/O bank 1 supply voltage |
| Broche 142 | I/O — User I/O pin (bank 1) |
| Broche 143 | I/O — User I/O pin (bank 1) |
| Broche 144 | GND — Ground |
Applications typiques
5M240ZT144I5N convient pour 6 applications: I/O Expansion and Bus Bridging, Power Management and Sequencing Controller, LED Driver and Display Multiplexing, Configuration and Reset Control for FPGAs/ASICs, Industrial Control and Sensor Aggregation, Consumer Product Glue Logic.
I/O Expansion and Bus Bridging
The 5M240ZT144I5N's 240 Logic Elements and 114 user I/O pins make it ideal for I/O expansion and protocol bridging between incompatible voltage domains or bus standards in industrial controllers. With multi-voltage I/O support from 1.2 V to 3.3 V, it can directly interface to legacy 5 V-tolerant buses (via external resistors) and modern low-voltage processors simultaneously. Its instant-on non-volatile flash configuration eliminates boot delay, which is critical for systems that must respond to control signals within microseconds of power-up. Common use cases include SPI-to-I2C bridging, GPIO expansion, and address decoding between processors and peripherals. Recommended companion parts: MAX V JTAG programming cable, level shifters.
Recommandé
Power Management and Sequencing Controller
The 5M240ZT144I5N is widely used as a multi-rail power-sequencing controller in FPGA-based boards, ATCA systems, and embedded compute modules. Its deterministic timing, JTAG programmability, and 8 Kbit User Flash Memory enable storage of sequencing profiles that adapt at runtime. With sub-1 mA standby current, it consumes negligible power when idle, and the industrial -40 C to +100 C temperature range handles harsh environments. Engineers use it to implement reset distribution, fault monitoring, and PG (power-good) signal aggregation. The instant-on behavior ensures controlled power-up of downstream regulators and ASICs the moment VCC ramps, eliminating race conditions.
Recommandé
LED Driver and Display Multiplexing
With 114 user I/O pins, the 5M240ZT144I5N can drive large LED arrays, 7-segment displays, and dot-matrix panels without external driver ICs. Its CMOS I/O structure supports typical LED current sink requirements when paired with appropriate current-limiting resistors or constant-current drivers. The MAX V CPLD's instant-on behavior means displays light immediately at power-up without the configuration delay of an FPGA, which is ideal for always-on indicators and front-panel controls. The 8 Kbit UFM can store animation patterns, brightness profiles, or test sequences that the CPLD executes autonomously. Recommended for HMI front panels, status indicators, and decorative lighting controllers.
Recommandé
Configuration and Reset Control for FPGAs/ASICs
The 5M240ZT144I5N frequently serves as a configuration watchdog for FPGAs and ASICs that require controlled initialization. It can hold a downstream device in reset until all prerequisite supplies are stable, then release the reset in a precise sequence, and monitor configuration DONE signals to gate system-level bring-up. Its flash-based non-volatile design ensures the configuration controller is ready before the FPGA even begins its boot sequence. The 8 Kbit UFM provides storage for revision IDs, serial numbers, and security keys used during FPGA bitstream authentication. This pattern is common in telecom line cards, industrial PCs, and avionics subsystems.
Recommandé
Industrial Control and Sensor Aggregation
In industrial PLCs, motor controllers, and sensor hubs, the 5M240ZT144I5N aggregates inputs from many low-speed sensors, performs local debouncing and thresholding, and presents a clean parallel interface to a host processor. Its industrial -40 C to +100 C temperature rating handles factory floor conditions, and the deterministic timing makes it suitable for safety-related glue logic where unexpected latency would be unacceptable. The multi-voltage I/O support enables direct connection to both 3.3 V microcontrollers and 5 V sensor arrays. JTAG in-system programmability supports field updates without desoldering, which simplifies long-life industrial equipment maintenance.
Recommandé
Consumer Product Glue Logic
In consumer electronics such as set-top boxes, gaming peripherals, and home appliances, the 5M240ZT144I5N replaces dozens of discrete logic chips with a single programmable device. Its instant-on behavior means peripherals respond immediately at power-on, and its sub-1 mA standby current is ideal for always-on appliances. Designers use it to implement remote-control decoders, button-matrix scanners, audio routing, and HDMI/DVI signal switching control. The non-volatile flash storage means the design is locked at manufacturing and there is no bitstream to load, reducing BOM cost and complexity. RoHS compliance supports sale into worldwide consumer markets.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour 5M240ZT144I5N — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | 5M240ZT144C5N | 5M240ZT144A5N | 5M1270ZT144I5N | 5M240ZT100I5N |
|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel |
| Package | TQFP-144 (T144) | TQFP-144 (T144) - same | TQFP-144 (T144) - same | TQFP-144 (T144) - same | TQFP-100 (T100) - different |
| Logic Elements | 240 LE | 240 LE | 240 LE | 1270 LE | 240 LE |
| Temperature Grade | Industrial (-40 C to +100 C) | Commercial (0 C to +85 C) | Automotive | Industrial (-40 C to +100 C) | Industrial (-40 C to +100 C) |
| Speed Grade | I5 | C5 | A5 | I5 | I5 |
| User I/O Pins | 114 | 114 | 114 | 114 | 79 |
| User Flash Memory | 8 Kbits | 8 Kbits | 8 Kbits | 8 Kbits | 8 Kbits |
| Internal Core Voltage | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
Principaux différenciateurs
- Largest user I/O count in MAX V family at this LE density (vs 5M240ZT100I5N)
- Industrial temperature range for harsh environments (vs 5M240ZT144C5N)
- Cost-down flexibility with same-footprint density migration (vs 5M1270ZT144I5N)
- Non-volatile instant-on behavior vs FPGA bitstream load (vs Cyclone V FPGA)
Notes de conception
The 5M240ZT144I5N requires separate VCCINT (1.8 V core) and VCCIO1-VCCIO4 (1.2 V to 3.3 V per bank) supplies. Place a 0.1 uF ceramic decoupling capacitor within 3 mm of each VCCINT and VCCIO pin; add a bulk 10 uF tantalum or ceramic cap at each supply rail entry point. Power sequencing between VCCINT and VCCIO is not required, but ensure all supplies ramp monotonically within datasheet-specified rise times. Estimate: at typical 240 LE utilization (50%) the device draws 15-25 mA total quiescent current.
Use a 4-layer PCB with continuous ground plane under the TQFP-144 package to minimize ground bounce and provide thermal relief. JTAG pins (TCK, TMS, TDI, TDO) must be brought to a test header or tag-connect footprint for in-system programming access. Keep I/O traces short (under 50 mm) to minimize reflections at the 3.3 V LVCMOS edge rates, and route clock inputs on inner layers with adjacent ground shielding. Estimated: a 4-layer 1.6 mm FR4 stack-up yields approximately 35 C/W theta-JA for this package.
Do not leave JTAG pins floating - tie TMS and TDI to VCCIO via 10 kohm pull-ups and leave TCK pulled low through 10 kohm for stable boundary-scan behavior. Avoid using the nCE (chip enable) pin as a logic input without consulting Quartus Prime documentation, as some legacy designs confuse nCE with nCONFIG. Ensure the UFM block is not overwritten by logic during ISP programming unless intentional. When migrating from MAX II or MAX IIZ designs, re-validate timing constraints because MAX V has slightly different delay specifications.
Although the 5M240ZT144I5N dissipates less than 50 mW typical, at maximum utilization (90% LE, high toggle rate) power can approach 200 mW. With a 35 C/W theta-JA estimate on a 4-layer board, this yields about 7 C temperature rise above ambient - well within the 100 C junction limit. No heatsink is required for typical operation. Verify with a thermal probe in production builds where environmental conditions exceed 70 C ambient.
Informations de conformité
RoHS and lead-free compliant per Intel/Altera product page. Industrial temperature grade (-40 C to +100 C). Not AEC-Q100 qualified - choose 5M240ZT144A5N or contact Intel for automotive-grade MAX V variants. Halogen-free status not explicitly stated in verified data.
