A3P250L-PQ208 - 250K Gate 1.2V ProASIC3L FPGA | Microchip
Référence : A3P250L-PQ208 ✓ ActifA3P250L-PQ208 Présentation
A ProASIC3L FPGA is an FPGA in the ProASIC3L family of programmable logic devices. FPGAs combine configurable logic cells, programmable interconnect, embedded RAM, and user I/O in a single semiconductor package. This places the device within the broader hierarchy of programmable logic devices, digital semiconductors, and embedded control systems. Unlike a mask-programmed custom ASIC, an FPGA can be reconfigured during development, prototyping, or production programming cycles.
The A3P250L provides 151 programmable input/output pins and 36,864 bits of RAM, giving a design engineer substantial interface bandwidth for parallel data acquisition, control, communications, and industrial automation. Its stated maximum clock frequency is 781.25 MHz according to the product listing information, although the achievable system clock depends on the selected device speed grade, logic design, I/O timing constraints, clocking topology, and PCB implementation. The 130 nm CMOS process technology supports integration of the programmable logic and embedded memory resources in a single 208-pin package.
Typical applications include industrial control systems, test and measurement equipment, communications interfaces, embedded signal-processing front ends, and general-purpose digital prototyping. The 151 I/O count is particularly useful when a design must retain many parallel pins rather than relying on a low-pin-count serial interface. Engineers should use the manufacturer datasheet and device programming documentation to confirm speed-grade behavior, supported clock configurations, I/O standards, and configuration requirements before releasing a production PCB.
The A3P250L-PQ208 should be used when 250K effective gates, 36,864 RAM bits, and 151 user I/O in a BFQFP-208 footprint are a better fit than a smaller programmable device. Its 1.2 V operating supply and 130 nm CMOS implementation make it suitable for compact embedded logic designs, while the large I/O count simplifies parallel bus integration. The package and device configuration still require careful power planning, signal-integrity review, and programming-tool verification.
This product page combines the verified device identity and package information with practical FPGA design guidance, pin-package considerations, and a focused comparison of closely related A3P250L configurations. The 208-pin package is not represented by a dedicated canonical package illustration key in the available library, so the package view uses the generic default representation rather than implying an inaccurate footprint drawing.
Alternatives de remplacement direct pour A3P250L-PQ208 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec A3P250L-PQ208 (même facteur de forme et même empreinte) — différant par Package, Process Technology.
A3P250L-PQG208I
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
A3P250L-PQ208I
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
A3P250L-1PQG208I
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →A3P250L-1PQG208Y
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
A3P250L-1PQ208
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
A3P250L-PQ208 Valeurs maximales et caractéristiques électriques
| Device Type | ProASIC3L FPGA |
| Effective Gate Count | 250,000 gates |
| Logic Cells | 6,144 CLBs |
| Embedded RAM | 36,864 bits |
| Programmable I/O | 151 pins |
| Tension d'alimentation | 1.2 V |
| Fréquence d'horloge maximale | 781.25 MHz |
| Process Technology | 130 nm CMOS |
| Boîtier | 208-pin BFQFP |
| Terminal Pitch | 0.5 mm |
| Type de montage | Surface mount |
| FPGA Family | ProASIC3L |
| Programmable Logic | FPGA |
Guide de configuration des broches du A3P250L-PQ208 208-pin bfqfp
Configuration des broches du A3P250L-PQ208 (boîtier 208-pin bfqfp). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour A3P250L-PQ208.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
A3P250L-PQ208 convient pour 6 applications: Industrial Automation Controllers, Test and Measurement Equipment, Communications Interface Equipment, Embedded Signal Processing Front Ends, Programmable Logic Prototyping, General-Purpose Digital Control.
Industrial Automation Controllers
The A3P250L-PQ208 fits programmable industrial automation controllers that need many discrete inputs and outputs alongside deterministic control logic. Its 151 programmable I/O pins can accommodate parallel machine interfaces, sensor banks, actuator controls, interlocks, and status signals without relying on a large serial transceiver. The 6,144 logic cells provide substantial room for state machines, timing logic, sequencing, and diagnostics, while 36,864 bits of embedded RAM can support local registers, command queues, and short data buffers. Because industrial systems can involve long wiring, noisy actuators, and temperature extremes, the final design must verify I/O voltage limits, input tolerances, output drive, operating temperature, isolation needs, and external protection components.
Recommandé
Test and Measurement Equipment
The A3P250L-PQ208 is appropriate for test and measurement products requiring parallel acquisition, precise sequencing, and programmable control logic. A 151-I/O device can connect directly to data buses, trigger lines, relay-control outputs, status indicators, and instrument interfaces while the 250,000 effective gates support timing generation, channel sequencing, and data-processing functions. The 1.2 V core operation fits modern low-voltage digital systems, and 36,864 bits of embedded RAM can hold calibration tables, measurement snapshots, or command buffers. Timing-critical instruments should use the manufacturer clocking and I/O guidance, validate signal integrity with controlled-impedance routing, and confirm the selected speed grade against the required sampling or trigger interval.
Recommandé
Communications Interface Equipment
The A3P250L-PQ208 suits communications-interface equipment that needs programmable protocol handling alongside numerous parallel lines. Its 151 programmable I/O pins can implement word-oriented buses, framing signals, clock distribution, carrier controls, and hardware handshakes, while the ProASIC3L logic fabric can accelerate protocol conversion, packet assembly, or error checking. The 36,864 bits of embedded RAM provide limited but useful local storage for descriptors, counters, and short buffers. Designers should determine whether the required throughput, I/O voltage, edge-rate, and clock topology fit the selected device, and should add external memory when the design requires frame buffers larger than the internal RAM resource.
Recommandé
Embedded Signal Processing Front Ends
The A3P250L-PQ208 can serve as a programmable front end for acquisition, filtering, triggering, and data-formatting systems. The 6,144 logic cells allow parallel datapaths to be implemented without a custom ASIC, and the 151 I/O pins simplify connection to multiple sensors, converters, or digital signal-processing blocks. Internal RAM can be used for sample windows, coefficient storage, or pipeline registers where the application permits a small on-chip working set. Clock-domain crossings, input sampling accuracy, and output timing must be treated as explicit design constraints. Engineers should use the ProASIC3L clock-management resources and confirm that the selected I/O standards and timing margins satisfy the signal chain before release.
Recommandé
Programmable Logic Prototyping
The A3P250L-PQ208 provides a practical platform for FPGA prototyping because engineers can revise the programmed logic without changing the PCB when a design changes. The 250,000 effective gates and 6,144 logic cells support substantial control and datapath experiments, while 36,864 bits of RAM enable realistic buffer and state-machine behavior. The 151-I/O BFQFP package also allows a prototype to expose many parallel test points and subsystem connections. The device should be programmed using the supported ProASIC3L toolchain, and the hardware design should reserve the required configuration and power resources. Before production transfer, validate the design under the intended temperature, voltage, clock, and I/O loading conditions.
Recommandé
General-Purpose Digital Control
The A3P250L-PQ208 is well suited to general-purpose digital control boards that combine multiple parallel peripherals with custom sequencing logic. The large I/O count allows the FPGA to consolidate legacy control functions, decode inputs, generate timing sequences, and supervise several external interfaces. Its 1.2 V core and reprogrammability make it useful for product variants that share one board design but require different firmware or logic configurations. A conservative implementation should include defined reset behavior, configuration storage, clock distribution, decoupling, and fault-safe I/O states. System partitioning should leave sufficient timing margin for the slowest external peripheral and should use the manufacturer device documentation to verify every power, bank, and pin constraint.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour A3P250L-PQ208 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | A3P250L-PQG208I | A3P250L-PQ208I | A3P250L-1PQG208 | A3P250L-1PQG208Y | A3P250L-1PQ208 |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 208-pin BFQFP | 208-pin BFQFP | 208-pin BFQFP | 208-pin BFQFP | 208-pin BFQFP | 208-pin BFQFP |
| FPGA Family | ProASIC3L | ProASIC3L | ProASIC3L | ProASIC3L | ProASIC3L | ProASIC3L |
Principaux différenciateurs
- Large programmable I/O count for parallel-interface designs (vs A3P250L-PQG208I)
- ProASIC3L resource density (vs A3P250L-PQ208I)
- Same 208-pin package platform (vs A3P250L-1PQG208)
Notes de conception
Use the manufacturer power tree and decoupling recommendations for the 1.2 V core and any required configuration or I/O supplies. Place the required local capacitors close to the corresponding supply and ground pins, keep the return path short, and separate noisy switching-node routing from sensitive clock and configuration lines. Confirm the final rail tolerances and power-sequencing requirements against the A3P250 documentation before fabrication.
The A3P250L-PQ208 uses a 208-pin BFQFP package with a 0.5 mm terminal pitch. Follow the manufacturer land pattern, pin numbering, solder-mask and paste recommendations exactly. Because the package library used for this page does not include a dedicated BFQFP-208 illustration, do not use the generic package image as a footprint reference. Check the pin-1 orientation, exposed or thermal features if applicable, and assembly clearances during PCB review.
Treat clocks, configuration signals, and high-speed I/O as controlled paths. Use short routes, continuous reference planes, appropriate via transitions, and termination or series damping where the datasheet and signal-integrity analysis require them. Keep clock distribution isolated from noisy logic and avoid long stubs. Validate setup and hold timing with the selected speed grade and perform post-layout simulation for high-fanout or externally clocked interfaces.
Do not treat a different ordering suffix as automatically interchangeable. Check the speed grade, temperature class, configuration method, supply values, and timing specifications for every replacement candidate. Also verify the device's supported I/O standards and bank restrictions; the listed 1.2 V core value does not by itself establish that every external interface uses 1.2 V. Confirm the programming file and configuration interface before committing a design to production.
Informations de conformité
The verified manufacturer and distributor information identifies the device family, package, resources, voltage, and technology but does not explicitly state the requested compliance statuses. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals documentation with Microchip before regulatory submission.