Microchip Technology

A3P250L-PQ208 - 250K Gate 1.2V ProASIC3L FPGA | Microchip

MPN: A3P250L-PQ208 ✓ פעיל
1.2 V Vdss 208-pin BFQFP Package 781.25 MHz Speed
כמות הזמנה מינימלית: 1 |

A3P250L-PQ208 סקירה

The Microchip A3P250L-PQ208 is a ProASIC3L field-programmable gate array with 250,000 effective gates, 6,144 logic cells, 36,864 bits of embedded RAM, and 151 programmable I/O pins. It operates from a 1.2 V core supply and is packaged in a 208-pin BFQFP plastic quad flat package for surface-mount PCB assembly. The A3P250L-PQ208 is intended for designs requiring a compact, reprogrammable logic solution rather than a fixed-function application-specific integrated circuit.

A ProASIC3L FPGA is an FPGA in the ProASIC3L family of programmable logic devices. FPGAs combine configurable logic cells, programmable interconnect, embedded RAM, and user I/O in a single semiconductor package. This places the device within the broader hierarchy of programmable logic devices, digital semiconductors, and embedded control systems. Unlike a mask-programmed custom ASIC, an FPGA can be reconfigured during development, prototyping, or production programming cycles.

The A3P250L provides 151 programmable input/output pins and 36,864 bits of RAM, giving a design engineer substantial interface bandwidth for parallel data acquisition, control, communications, and industrial automation. Its stated maximum clock frequency is 781.25 MHz according to the product listing information, although the achievable system clock depends on the selected device speed grade, logic design, I/O timing constraints, clocking topology, and PCB implementation. The 130 nm CMOS process technology supports integration of the programmable logic and embedded memory resources in a single 208-pin package.

Typical applications include industrial control systems, test and measurement equipment, communications interfaces, embedded signal-processing front ends, and general-purpose digital prototyping. The 151 I/O count is particularly useful when a design must retain many parallel pins rather than relying on a low-pin-count serial interface. Engineers should use the manufacturer datasheet and device programming documentation to confirm speed-grade behavior, supported clock configurations, I/O standards, and configuration requirements before releasing a production PCB.

The A3P250L-PQ208 should be used when 250K effective gates, 36,864 RAM bits, and 151 user I/O in a BFQFP-208 footprint are a better fit than a smaller programmable device. Its 1.2 V operating supply and 130 nm CMOS implementation make it suitable for compact embedded logic designs, while the large I/O count simplifies parallel bus integration. The package and device configuration still require careful power planning, signal-integrity review, and programming-tool verification.

This product page combines the verified device identity and package information with practical FPGA design guidance, pin-package considerations, and a focused comparison of closely related A3P250L configurations. The 208-pin package is not represented by a dedicated canonical package illustration key in the available library, so the package view uses the generic default representation rather than implying an inaccurate footprint drawing.

חלופות תחליף ישיר עבור A3P250L-PQ208 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם A3P250L-PQ208 (אותו גורם צורה וטביעת רגל) — שונים ב Package, Process Technology.

Microsemi
Package: 208-PQFP (28x28 mm)
Process Technology: 130 nm
השווה עם A3P250L-PQ208 →

A3P250L-PQG208I

✅ Drop-In
📦 208-pin BFQFP
Same 208-pin BFQFP package and A3P250L resource class; industrial I suffix may change temperature qualification, while logic and RAM resources remain closely matched

📋 חלופה להתייחסות (לא בקטלוג)

A3P250L-PQ208I

✅ Drop-In
📦 208-pin BFQFP
Same 208-pin BFQFP package and A3P250L device family; I suffix indicates an industrial ordering option and may change operating-temperature qualification

📋 חלופה להתייחסות (לא בקטלוג)

A3P250L-1PQG208I

✅ Drop-In
Microsemi
📦 208-pin BFQFP
ProASIC3L · 250,000 · 36,864 bits · 151 · 1.2 V · 130 nm · 208-PQFP (28x28 mm) · -40C to +100C (TJ)

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

A3P250L-1PQG208Y

✅ Drop-In
📦 208-pin BFQFP
Same 208-pin BFQFP package and A3P250L resource class; -1 identifies the speed grade and Y identifies the ordering qualification option

📋 חלופה להתייחסות (לא בקטלוג)

A3P250L-1PQ208

✅ Drop-In
📦 208-pin BFQFP
Same 208-pin PQFP package and A3P250L resource class; -1 changes the speed designation, so timing and temperature-grade details require verification

📋 חלופה להתייחסות (לא בקטלוג)

A3P250L-PQ208 דירוגים מרביים ומאפיינים חשמליים

Device Type ProASIC3L FPGA
Effective Gate Count 250,000 gates
Logic Cells 6,144 CLBs
Embedded RAM 36,864 bits
Programmable I/O 151 pins
מתח אספקה 1.2 V
תדר שעון מקסימלי 781.25 MHz
Process Technology 130 nm CMOS
מארז 208-pin BFQFP
Terminal Pitch 0.5 mm
סוג הרכבה Surface mount
FPGA Family ProASIC3L
Programmable Logic FPGA

מדריך תצורת פינים של A3P250L-PQ208 208-pin bfqfp

תצורת פינים עבור A3P250L-PQ208 (מארזת 208-pin bfqfp). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 208-pin bfqfp עבור A3P250L-PQ208

אין נתוני פריסת פינים מפורטים עבור A3P250L-PQ208.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

A3P250L-PQ208 מתאים עבור 6 יישוםs: Industrial Automation Controllers, Test and Measurement Equipment, Communications Interface Equipment, Embedded Signal Processing Front Ends, Programmable Logic Prototyping, General-Purpose Digital Control.

🏭

Industrial Automation Controllers

The A3P250L-PQ208 fits programmable industrial automation controllers that need many discrete inputs and outputs alongside deterministic control logic. Its 151 programmable I/O pins can accommodate parallel machine interfaces, sensor banks, actuator controls, interlocks, and status signals without relying on a large serial transceiver. The 6,144 logic cells provide substantial room for state machines, timing logic, sequencing, and diagnostics, while 36,864 bits of embedded RAM can support local registers, command queues, and short data buffers. Because industrial systems can involve long wiring, noisy actuators, and temperature extremes, the final design must verify I/O voltage limits, input tolerances, output drive, operating temperature, isolation needs, and external protection components.

🔧

Test and Measurement Equipment

The A3P250L-PQ208 is appropriate for test and measurement products requiring parallel acquisition, precise sequencing, and programmable control logic. A 151-I/O device can connect directly to data buses, trigger lines, relay-control outputs, status indicators, and instrument interfaces while the 250,000 effective gates support timing generation, channel sequencing, and data-processing functions. The 1.2 V core operation fits modern low-voltage digital systems, and 36,864 bits of embedded RAM can hold calibration tables, measurement snapshots, or command buffers. Timing-critical instruments should use the manufacturer clocking and I/O guidance, validate signal integrity with controlled-impedance routing, and confirm the selected speed grade against the required sampling or trigger interval.

🌐

Communications Interface Equipment

The A3P250L-PQ208 suits communications-interface equipment that needs programmable protocol handling alongside numerous parallel lines. Its 151 programmable I/O pins can implement word-oriented buses, framing signals, clock distribution, carrier controls, and hardware handshakes, while the ProASIC3L logic fabric can accelerate protocol conversion, packet assembly, or error checking. The 36,864 bits of embedded RAM provide limited but useful local storage for descriptors, counters, and short buffers. Designers should determine whether the required throughput, I/O voltage, edge-rate, and clock topology fit the selected device, and should add external memory when the design requires frame buffers larger than the internal RAM resource.

📡

Embedded Signal Processing Front Ends

The A3P250L-PQ208 can serve as a programmable front end for acquisition, filtering, triggering, and data-formatting systems. The 6,144 logic cells allow parallel datapaths to be implemented without a custom ASIC, and the 151 I/O pins simplify connection to multiple sensors, converters, or digital signal-processing blocks. Internal RAM can be used for sample windows, coefficient storage, or pipeline registers where the application permits a small on-chip working set. Clock-domain crossings, input sampling accuracy, and output timing must be treated as explicit design constraints. Engineers should use the ProASIC3L clock-management resources and confirm that the selected I/O standards and timing margins satisfy the signal chain before release.

🧩

Programmable Logic Prototyping

The A3P250L-PQ208 provides a practical platform for FPGA prototyping because engineers can revise the programmed logic without changing the PCB when a design changes. The 250,000 effective gates and 6,144 logic cells support substantial control and datapath experiments, while 36,864 bits of RAM enable realistic buffer and state-machine behavior. The 151-I/O BFQFP package also allows a prototype to expose many parallel test points and subsystem connections. The device should be programmed using the supported ProASIC3L toolchain, and the hardware design should reserve the required configuration and power resources. Before production transfer, validate the design under the intended temperature, voltage, clock, and I/O loading conditions.

🔧

General-Purpose Digital Control

The A3P250L-PQ208 is well suited to general-purpose digital control boards that combine multiple parallel peripherals with custom sequencing logic. The large I/O count allows the FPGA to consolidate legacy control functions, decode inputs, generate timing sequences, and supervise several external interfaces. Its 1.2 V core and reprogrammability make it useful for product variants that share one board design but require different firmware or logic configurations. A conservative implementation should include defined reset behavior, configuration storage, clock distribution, decoupling, and fault-safe I/O states. System partitioning should leave sufficient timing margin for the slowest external peripheral and should use the manufacturer device documentation to verify every power, bank, and pin constraint.

What is A3P250L-PQ208?
The A3P250L-PQ208 is a Microchip ProASIC3L FPGA with 250,000 effective gates, 6,144 logic cells, 36,864 bits of embedded RAM, and 151 programmable I/O pins. It uses a 1.2 V supply and is packaged in a 208-pin BFQFP. The device is intended for programmable digital logic, parallel interface, control, and communications designs. Its configuration is programmable, allowing the same hardware platform to support different logic implementations.
How many gates and I/O pins does A3P250L-PQ208 have?
The A3P250L-PQ208 provides 250,000 effective gates and 151 programmable I/O pins. The product also contains 6,144 logic cells and 36,864 bits of embedded RAM. These resources make it appropriate for designs that need substantial parallel I/O rather than only a small serial interface. The I/O count is especially useful for bus interfaces, data capture, and multi-bit control logic.
What is the operating voltage of A3P250L-PQ208?
The A3P250L-PQ208 operates from a 1.2 V core supply. The 1.2 V value is the core operating supply listed for the device; external I/O voltage requirements and configuration-supply details should be confirmed in the manufacturer datasheet. Designers should design the power tree around the device's specified core and I/O voltage limits rather than assuming a single supply covers every interface.
Where can I download the A3P250L-PQ208 datasheet?
The manufacturer product page for the A3P250 family is available at https://www.microchip.com/en-us/product/A3P250, and the verified distributor result for the exact MPN is available at https://www.digikey.com/en/products/detail/microchip-technology/A3P250L-PQ208/2859643. Use the manufacturer documentation for pin assignments, electrical limits, configuration, timing, and programming requirements. The distributor listing is useful for part identification and commercial inquiry.
Where is the A3P250L-PQ208 pinout located?
The A3P250L-PQ208 pinout is identified as a 208-pin BFQFP package, and the device is also described as using a 0.5 mm terminal pitch. Exact pin numbers, configuration pins, power pins, and I/O assignments should be taken from the manufacturer's A3P250 datasheet and package drawing. The available canonical package library does not include a dedicated BFQFP-208 key, so this page does not reproduce a potentially inaccurate pin-number diagram.
What is the maximum clock frequency of A3P250L-PQ208?
The listed maximum clock frequency for A3P250L-PQ208 is 781.25 MHz. This figure is a device capability reference, not a guaranteed operating frequency for every user design. Actual timing depends on the speed grade, selected clocking resources, logic depth, I/O constraints, and board implementation. Engineers should use the datasheet timing tables and post-route timing analysis for the final design.
Can A3P250L-PQ208 be used for industrial control systems?
Yes, the A3P250L-PQ208 is suitable for industrial control applications that benefit from programmable logic, parallel I/O, and embedded RAM. Its 151 programmable I/O pins can support machine interfaces, counters, interlocks, data registers, and communication logic. Industrial designs should additionally verify operating temperature, isolation, surge requirements, and any application-specific certification rather than relying only on the FPGA feature set.
Can A3P250L-PQ208 replace A3P250-PQ208?
A3P250L-PQ208 and A3P250-PQ208 are related ProASIC3-family devices, but they should not be treated as drop-in replacements without confirming the speed grade, electrical limits, configuration method, and timing specifications. The A3P250L designation identifies the ProASIC3L family, while the related A3P250 listing represents a different device designation. Validate the complete manufacturer datasheet and programming workflow before substituting one for the other.
What is the best drop-in replacement for A3P250L-PQ208?
The closest verified same-package candidates are A3P250L-PQG208I, A3P250L-PQ208I, A3P250L-1PQG208, A3P250L-1PQG208Y, and A3P250L-1PQ208. These parts use the same 208-pin family package, but suffix changes can indicate industrial qualification, speed grade, or other ordering options. A true drop-in choice still requires matching the exact speed grade, temperature class, configuration interface, supply requirements, and timing guarantees.
What can replace A3P250L-PQ208 in a drop-in design?
A3P250L-1PQ208 is the closest visible same-package alternative in the verified cross-reference results because it retains the PQ208 package format. However, a replacement is only safe after comparing the speed suffix, operating-temperature class, configuration method, I/O behavior, and timing specifications. Do not assume that a different suffix is electrically and functionally identical without confirming the relevant manufacturer documentation.
When should I choose A3P250L-PQ208 over a smaller FPGA?
Choose the A3P250L-PQ208 when a design needs 250,000 effective gates, 6,144 logic cells, 36,864 bits of RAM, or approximately 151 programmable I/O pins. A smaller FPGA may be preferable when the design uses fewer resources, needs a smaller package, or targets a lower-cost board. The A3P250L is most compelling when parallel interfaces and embedded logic resources matter more than package size.
Is A3P250L-PQ208 suitable for communications equipment?
Yes, the A3P250L-PQ208 can support communications equipment when the required data paths, parallel buses, clocking, and I/O standards fit the device. Its 151 programmable I/O pins are useful for parallel word interfaces, while 36,864 bits of RAM can support buffering, framing, or small protocol state machines. The final design must verify I/O voltage, timing, impedance, and signal-integrity requirements in the datasheet.
How much embedded RAM does A3P250L-PQ208 contain?
The A3P250L-PQ208 contains 36,864 bits of embedded RAM. That resource is useful for small buffers, lookup tables, packet or frame staging, and control states that benefit from on-chip storage. For larger frame buffers, designers should account for external memory interfaces and their timing requirements. The RAM quantity is a device resource value, not a guarantee that every architecture can use it at the maximum theoretical rate.
Is A3P250L-PQ208 still active?
The product information identifies the A3P250L family as an established Microchip ProASIC3L FPGA offering, and the current verified distributor results include the exact A3P250L-PQ208 listing. The manufacturer product page remains the best authority for lifecycle status. For new production releases, request current lifecycle and availability confirmation through the Request a Quote form on this page.
How do I request a quote for A3P250L-PQ208?
Use the Request a Quote form on this page to request current commercial terms, availability, lead time, and MOQ for A3P250L-PQ208. The verified distributor results identify the exact MPN and package, but they do not provide a complete quantity-break price table in the cited page snippets. The form is the appropriate route for a current sourcing response and shipment planning.

נתוני עזר הנדסיים עבור A3P250L-PQ208 — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the A3P250L-PQ208 for a programmable design that needs 250,000 effective gates, 6,144 logic cells, 36,864 bits of embedded RAM, and 151 programmable I/O pins in a 208-pin BFQFP package. The related A3P250L-PQG208I and A3P250L-PQ208I candidates are appropriate starting points when an industrial ordering option is required, but their suffix-specific temperature and qualification details must be confirmed. A3P250L-1PQG208 and A3P250L-1PQG208Y add a -1 speed designation, so choose them only after checking the required clock margin and timing grade. A3P250L-1PQ208 is another same-package option with a speed designation. For all candidates, verify configuration method, supply requirements, I/O standards, operating temperature, and programming-tool support. If the design does not need the 151 I/O pins or the full ProASIC3L resource set, a smaller FPGA may provide a simpler and lower-cost implementation.

השוואה עם חלופות

פרמטר מוצר זה A3P250L-PQG208I A3P250L-PQ208I A3P250L-1PQG208 A3P250L-1PQG208Y A3P250L-1PQ208
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 208-pin BFQFP 208-pin BFQFP 208-pin BFQFP 208-pin BFQFP 208-pin BFQFP 208-pin BFQFP
FPGA Family ProASIC3L ProASIC3L ProASIC3L ProASIC3L ProASIC3L ProASIC3L

מבדילים עיקריים

  • Large programmable I/O count for parallel-interface designs (לעומתA3P250L-PQG208I)
  • ProASIC3L resource density (לעומתA3P250L-PQ208I)
  • Same 208-pin package platform (לעומתA3P250L-1PQG208)

הערות תכנון

Use the manufacturer power tree and decoupling recommendations for the 1.2 V core and any required configuration or I/O supplies. Place the required local capacitors close to the corresponding supply and ground pins, keep the return path short, and separate noisy switching-node routing from sensitive clock and configuration lines. Confirm the final rail tolerances and power-sequencing requirements against the A3P250 documentation before fabrication.

The A3P250L-PQ208 uses a 208-pin BFQFP package with a 0.5 mm terminal pitch. Follow the manufacturer land pattern, pin numbering, solder-mask and paste recommendations exactly. Because the package library used for this page does not include a dedicated BFQFP-208 illustration, do not use the generic package image as a footprint reference. Check the pin-1 orientation, exposed or thermal features if applicable, and assembly clearances during PCB review.

Treat clocks, configuration signals, and high-speed I/O as controlled paths. Use short routes, continuous reference planes, appropriate via transitions, and termination or series damping where the datasheet and signal-integrity analysis require them. Keep clock distribution isolated from noisy logic and avoid long stubs. Validate setup and hold timing with the selected speed grade and perform post-layout simulation for high-fanout or externally clocked interfaces.

Do not treat a different ordering suffix as automatically interchangeable. Check the speed grade, temperature class, configuration method, supply values, and timing specifications for every replacement candidate. Also verify the device's supported I/O standards and bank restrictions; the listed 1.2 V core value does not by itself establish that every external interface uses 1.2 V. Confirm the programming file and configuration interface before committing a design to production.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The verified manufacturer and distributor information identifies the device family, package, resources, voltage, and technology but does not explicitly state the requested compliance statuses. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals documentation with Microchip before regulatory submission.

הנתונים אומתו בתאריך: 2026-11-16 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

a3p250 datasheet A3P250L-PQ208 datasheet A3P250L-PQ208 pinout A3P250L-PQ208 datasheet pdf A3P250L-PQ208 equivalent A3P250L-PQ208 replacement A3P250L-PQ208 cross reference A3P250L-PQ208 vs A3P250L-PQG208I A3P250L-PQ208 footprint A3P250L-PQ208 application circuit Microchip A3P250L-PQ208 A3P250L-PQ208 price A3P250L-PQ208 stock

רכיבים ומונחים קשורים

Microchip Technology A3P250L-PQ208 ProASIC3L field-programmable gate array FPGA programmable logic device digital semiconductor embedded control system logic cell CLB embedded RAM programmable I/O 151 I/O pins 250,000 effective gates 6,144 logic cells 36,864-bit RAM 1.2 V supply 781.25 MHz 130 nm CMOS BFQFP-208 208-pin PQFP 0.5 mm terminal pitch surface-mount packaging industrial control communications equipment
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר