Analog Devices

AD722JR-16 - RGB to NTSC/PAL Video Encoder | Analog Devices

Référence : AD722JR-16 ✓ Actif
NTSC and PAL Rds(on) 16 pins Package
MOQ : 1 |

AD722JR-16 Présentation

The Analog Devices AD722JR-16 is a low-cost RGB to NTSC/PAL video encoder that converts separate red, green, and blue color-component signals into luminance and chrominance outputs in either the NTSC or PAL television standard. It also combines these signals to produce a composite-video output, with all three outputs able to drive 75 ohm loads.

An RGB-to-video encoder is a signal-processing integrated circuit used to translate computer-style RGB graphics into analog television signals. Within the broader interface-IC hierarchy, it converts parallel color information into composite or separate luminance and chrominance waveforms. This makes the device useful in legacy video systems, industrial displays, test equipment, video processing equipment, and embedded systems that require an analog NTSC or PAL interface.

The AD722's principal feature is simultaneous generation of separate luminance and chrominance signals plus composite video. Luminance carries the brightness component of the picture, while chrominance carries color information as a subcarrier signal with the associated phase and amplitude information. The composite output combines the luminance and chrominance paths into the signal expected by NTSC or PAL video equipment.

Operation depends on selecting the correct television standard and supplying compatible RGB and timing information. A PAL system uses a different subcarrier and field behavior from NTSC, so the encoder must be configured for the intended video system rather than used as a universal converter. The separate composite, luminance, and chrominance outputs provide flexibility when an equipment designer needs to process or route individual video components before the final composite signal is formed.

The outputs are designed for 75 ohm video environments. This makes the AD722JR-16 relevant to professional and legacy broadcast-related equipment, closed-circuit television systems, industrial monitoring systems, and video test instruments using conventional analog television interfaces. It is also suitable for educational and laboratory setups where NTSC or PAL generation from digital RGB sources is required.

When implementing the device, route the luminance, chrominance, and composite outputs according to the termination and impedance requirements of the target video system. Keep analog video traces short, control ground return paths, and follow the manufacturer's application guidance for external synchronization, input levels, decoupling, and output loading. Confirm the selected NTSC or PAL mode against the receiving equipment before enabling the video path.

This product overview combines the manufacturer's functional description, interface characteristics, sourcing information, and application guidance with practical considerations for legacy analog-video designs. It also distinguishes true drop-in replacements from merely similar encoders, helping engineers verify compatibility before committing to a PCB or production change.

Alternatives de remplacement direct pour AD722JR-16 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Aucune alternative de remplacement direct disponible pour ce produit.

Demander des alternatives

AD722JR-16 Valeurs maximales et caractéristiques électriques

Product Type RGB to NTSC/PAL video encoder
Supported Video Standards NTSC and PAL
Primary Inputs Separate red, green, and blue color-component signals
Separate Video Outputs Luminance and chrominance outputs
Combined Video Output Composite video output
Output Load Capability 75 ohm
Output Drive All three outputs can simultaneously drive 75 ohm loads
Package Pin Count 16 pins
Package Type 16-lead plastic DIP
Type de montage Through-hole

Guide de configuration des broches du AD722JR-16 16-lead plastic dip

Configuration des broches du AD722JR-16 (boîtier 16-lead plastic dip). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier 16-lead plastic dip pour le AD722JR-16

Aucune donnée de brochage détaillée disponible pour AD722JR-16.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

AD722JR-16 convient pour 6 applications: NTSC Video Signal Generation, PAL Video Signal Generation, Industrial Monitoring and CCTV, Video Test and Measurement Equipment, Legacy RGB-to-Video Adapters, Educational Video Electronics.

📺

NTSC Video Signal Generation

The AD722JR-16 fits NTSC video-generation equipment that begins with separate RGB color-component signals and needs an analog television output. Its encoder function converts those RGB inputs into separate luminance and chrominance outputs, while the composite path combines them into the resulting NTSC video signal. The Analog Devices product page also states that all three outputs can simultaneously drive 75 ohm loads, which is useful for conventional video routing. In a practical implementation, the device sits between a digital graphics source and an analog NTSC monitor or test-equipment input. Designers should select the proper NTSC operating mode, verify synchronization and signal-level limits in the datasheet, and provide the recommended decoupling and output termination.

📺

PAL Video Signal Generation

The AD722JR-16 is appropriate for PAL-compatible legacy video equipment requiring RGB-to-composite conversion. It generates luminance and chrominance in accordance with PAL and offers a separate composite output, allowing an equipment designer to route the final composite signal directly or use the separate component paths for additional processing. The ability to drive all three outputs into 75 ohm loads supports standard analog-video interconnections. A typical application is an industrial or laboratory display system that receives RGB graphics from a controller and transmits PAL video to a monitor. The system must configure the encoder for PAL rather than NTSC, observe the manufacturer's synchronization requirements, and keep the analog output routing short and properly terminated.

🎥

Industrial Monitoring and CCTV

The AD722JR-16 can support legacy industrial monitoring and closed-circuit television equipment that needs RGB graphics converted into an NTSC or PAL-compatible analog signal. Its three-output architecture provides flexibility: luminance and chrominance may remain separate for internal signal processing, while the composite output feeds a conventional video connector or monitor input. The 75 ohm output-drive specification aligns with the video environment described by Analog Devices. In an installation, the encoder can sit near the graphics source to minimize analog routing distance and prevent interference with digital control circuitry. Environmental, supply-voltage, and timing requirements must be checked against the manufacturer documentation, while PCB layout should include a quiet ground return and the recommended bypass network.

🔧

Video Test and Measurement Equipment

The AD722JR-16 is well suited to test equipment that must generate controllable NTSC or PAL waveforms from RGB inputs. Separate luminance, chrominance, and composite outputs allow an instrument to expose individual video components for analysis or compare them with the combined composite signal. Because all three outputs can drive 75 ohm loads simultaneously, the encoder can operate near measured video terminations when the surrounding circuit is configured accordingly. Designers can use this arrangement in video-generation fixtures, broadcast-service test boxes, and laboratory signal-reference systems. The key implementation checks are synchronization mode, analog input levels, output termination, and grounding. The manufacturer datasheet should govern connector protection, coupling, and any attenuator or amplifier stages added around the encoder.

🖥️

Legacy RGB-to-Video Adapters

The AD722JR-16 is a functional centerpiece for legacy RGB-to-video adapter boards that need to connect a computer-style graphics output to an NTSC or PAL display. Its separate luminance, chrominance, and composite paths provide more connection flexibility than a composite-only adapter, while the 16-lead plastic DIP package supports a straightforward through-hole implementation. Such adapters benefit from placing the encoder close to the RGB input circuitry and routing the analog outputs directly toward the video connector. Signal traces should remain short, ground returns should be continuous, and unused or unused-in-this-design functions must follow the manufacturer's pin-assignment guidance. Input levels and synchronization must be matched to the source equipment before the adapter is connected to a monitor.

🧩

Educational Video Electronics

The AD722JR-16 supports educational demonstrations of analog color-video encoding because it converts understandable RGB inputs into the luminance, chrominance, and composite signals used by NTSC and PAL systems. Students can observe how separate color information becomes a composite television waveform while using the encoder in laboratory instruments, training panels, or demonstration equipment. The 75 ohm output capability provides a familiar loading target for standard video connections. A useful setup places the AD722 on a perforated or through-hole training board, uses controlled RGB inputs, and includes separate test points for all three outputs. Power bypassing, synchronization, input amplitudes, and termination should follow the manufacturer guidance to ensure the observed waveforms represent correct encoder operation rather than board-level errors.

What is the AD722JR-16?
The AD722JR-16 is a low-cost RGB to NTSC/PAL video encoder from Analog Devices. According to the Analog Devices product page, it converts separate red, green, and blue component signals into luminance and chrominance signals for NTSC or PAL systems, then combines those signals to provide a composite-video output. The device is packaged in a 16-lead plastic DIP.
What video outputs does the AD722JR-16 produce?
The AD722JR-16 produces separate luminance, chrominance, and composite-video outputs. According to the Analog Devices product page, the luminance and chrominance outputs correspond to the brightness and color portions of the encoded video signal, while the composite output combines both paths. All three outputs can simultaneously drive 75 ohm video loads.
Can the AD722JR-16 operate in both NTSC and PAL systems?
The AD722JR-16 supports both NTSC and PAL encoding. The Analog Devices product page describes it as an RGB to NTSC/PAL encoder that produces luminance, chrominance, and composite outputs in accordance with either television standard. Equipment designers must configure the device for the intended system because NTSC and PAL use different color-subcarrier and timing characteristics.
Where can I download the AD722JR-16 datasheet?
The official AD722 product page is the primary starting point for the AD722JR-16 datasheet and technical documentation. Analog Devices identifies the AD722 as an RGB to NTSC/PAL encoder and provides the product resources for the device. Use the manufacturer datasheet for package drawings, pin assignments, electrical limits, timing information, and application details.
Where can I find the AD722JR-16 pinout?
The AD722JR-16 pinout is located in the pin-description and package-drawing sections of the Analog Devices AD722 datasheet. The part uses a 16-lead plastic DIP package, so its diagram should be checked against that mechanical outline before assigning PCB connections. Do not infer pin functions from the RGB, luminance, chrominance, and composite signal names alone.
What are the key specifications engineers should know about AD722JR-16?
The key AD722JR-16 specifications are its RGB input function, NTSC and PAL output support, three simultaneous video outputs, and 75 ohm output-drive capability. The Analog Devices product page identifies the device as a low-cost RGB encoder with separate luminance and chrominance outputs plus a combined composite-video output. The 16-lead plastic DIP package supports conventional through-hole board layouts.
Is the MAX7421 a pin-compatible replacement for AD722JR-16?
The MAX7421 is not a direct pin-compatible replacement for the AD722JR-16. A component cross-reference result specifically identifies differences in control logic, output-drive architecture, and power-sequencing requirements. Although both devices relate to RGB video encoding, those functional and electrical differences mean a board-level substitution requires additional engineering review rather than a simple drop-in change.
What can replace the AD722JR-16 without redesigning the PCB?
No verified drop-in replacement for the AD722JR-16 is established by the available cross-reference information. The MAX7421 is specifically described as not serving as a direct pin-compatible replacement, and no other compatible MPN is identified. A replacement search should therefore require confirmation of the 16-pin footprint, RGB input levels, synchronization, NTSC/PAL configuration, and all three output characteristics.
AD722JR-16 versus MAX7421: which encoder is easier to use?
The AD722JR-16 is easier to identify as the direct fit for a design specifically built around the AD722's 16-lead DIP interface, because the MAX7421 does not match its control logic, output-drive architecture, and power-sequencing requirements. The MAX7421 may serve a different design after its interface is reviewed, but it should not be treated as a transparent AD722JR-16 substitution.
When should I choose the AD722JR-16 instead of another video encoder?
Choose the AD722JR-16 when an existing PCB requires a 16-lead DIP RGB encoder and the system specifically needs simultaneous luminance, chrominance, and composite outputs for NTSC or PAL. The Analog Devices product page confirms 75 ohm output-drive capability for all three outputs. Selection should also preserve the established pinout, synchronization method, and analog signal levels of the target equipment.
Is the AD722JR-16 suitable for industrial video and CCTV equipment?
The AD722JR-16 is suitable for legacy analog video equipment that accepts NTSC or PAL and needs RGB-to-video conversion. Its simultaneous luminance, chrominance, and composite outputs support flexible analog signal routing, while the 75 ohm load capability matches conventional video interfaces. Confirm supply, timing, input-level, and environmental limits in the manufacturer documentation before industrial deployment.
How should the AD722JR-16 output network be designed?
Design the AD722JR-16 output network for a 75 ohm video environment because all three outputs can drive 75 ohm loads simultaneously. Follow the manufacturer's recommended output termination and coupling arrangements, keep analog traces short, and provide a low-impedance return path. Confirm the receiver's expected synchronization and composite-video topology before finalizing resistor or capacitor values.
Where can I buy the AD722JR-16 and request a quotation?
Use the Request a Quote form on this page to ask about AD722JR-16 availability, unit pricing, quantity breaks, and expected lead time. The request should include the exact 16-lead plastic DIP MPN and the required quantity. Because legacy encoder inventory can vary, request the current commercial terms before releasing a production order.
What is the price of the AD722JR-16?
The current AD722JR-16 quotation is available through the Request a Quote form on this page. The form allows buyers to specify quantity and obtain the applicable commercial terms without relying on a static listing that may become outdated. Buyers should confirm stock, lead time, and the exact AD722JR-16 ordering code with the returned quotation.
Is the AD722JR-16 in stock and what is its lead time?
Current AD722JR-16 stock and lead time should be confirmed through the Request a Quote form on this page. The form accepts the required quantity and ordering information, allowing the commercial response to reflect the latest inventory position. This is particularly important for legacy video-encoder designs where production planning may depend on available supplier inventory.

Données de référence d'ingénierie pour AD722JR-16 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the AD722JR-16 when maintaining or designing equipment that specifically requires separate RGB inputs, simultaneous luminance and chrominance outputs, and a composite output for NTSC or PAL video. Its 16-lead plastic DIP package, through-hole construction, and 75 ohm output-drive capability suit legacy analog-video equipment and boards whose layout already matches this encoder. Before ordering, verify the complete pinout, supply requirements, synchronization method, input levels, environmental limits, and output termination against the manufacturer documentation. A functionally similar encoder is not automatically interchangeable because control logic, output-drive architecture, and power sequencing can differ even when the signal format appears similar. For a new design, compare those interfaces first and use the Request a Quote form to confirm the exact MPN's commercial availability, lead time, and required quantity.

Notes de conception

Place the AD722JR-16 close to the RGB source and route the three analog outputs directly toward their receivers. Keep the luminance, chrominance, and composite paths short, provide a continuous ground reference, and avoid sharing narrow return paths with switching or digital-clock circuitry. This arrangement reduces susceptibility to noise and impedance discontinuities in the 75 ohm video environment.

Confirm the television standard, synchronization method, and signal levels before operating the encoder. NTSC and PAL are not interchangeable merely because both produce composite video, and incorrect timing or input amplitudes can create color, phase, or synchronization errors. Use the manufacturer's pin description and application guidance to verify each connection rather than inferring function from the signal names alone.

Use the manufacturer's recommended bypass capacitors and place them close to the supply pins with short ground returns. Decoupling connections should not share long traces with analog outputs, particularly when the encoder is mounted near high-speed digital circuitry. After assembly, verify supply stability and inspect the three outputs with a correctly terminated measurement setup before attaching external video equipment.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The AD722 is a legacy analog video encoder rather than an automotive-qualified device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated on the cited product page.

Recherches associées

AD722JR-16 datasheet AD722JR-16 datasheet pdf AD722JR-16 pinout AD722JR-16 specifications AD722JR-16 equivalent AD722JR-16 replacement AD722JR-16 drop-in substitute AD722JR-16 vs MAX7421 Analog Devices AD722JR-16 AD722JR-16 RGB to NTSC encoder AD722JR-16 PAL video encoder AD722JR-16 16 pin DIP AD722JR-16 price AD722JR-16 stock

Composants & termes associés

Analog Devices AD722 AD722JR-16 RGB video encoder NTSC encoder PAL encoder luminance output chrominance output composite video output RGB color components video interface IC signal-processing integrated circuit analog video 75 ohm video load 16-lead plastic DIP through-hole package MAX7421 legacy video equipment industrial monitoring video test equipment
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ