Analog Devices

AD977BRSZ - 16-Bit 100 kSPS SAR ADC | Analog Devices

Référence : AD977BRSZ ✗ Fin de vie
4.75 V to 5.25 V Vdss 28-pin SSOP, 5.30 mm width Package
MOQ : 1 |

AD977BRSZ Présentation

The Analog Devices AD977BRSZ is a 16-bit, single-input successive-approximation analog-to-digital converter with a 100 kSPS throughput rate, operating from a single 5 V supply and packaged in a 28-pin SSOP. The converter uses a high-speed serial interface and includes an internal 2.5 V reference. Factory calibration minimizes linearity errors, making the device suitable for precision signal acquisition where compactness, low power, and calibrated performance are important.

An ADC converts an analog input voltage into a digital code for processing, storage, or transmission. The AD977 belongs to the successive-approximation ADC, or SAR ADC, category within the broader analog-to-digital converter and semiconductor hierarchy. SAR AD977-family devices compare the input against an internally generated DAC value during successive conversion cycles. Their serial interface reduces the number of external signal connections, while the internal reference simplifies analog front-end design and system calibration.

The AD977BRSZ combines 16-bit resolution with a 100 kSPS conversion rate. It operates from a single 5 V rail, with a stated supply range of 4.75 V to 5.25 V. Its power dissipation is listed at a maximum of 100 mW, and a power-down mode is available for reducing consumption when conversions are not required. The operating-temperature range extends from -40°C to +85°C, supporting industrial-temperature equipment when the complete system is designed for that environment.

Internally, the AD977 uses a switched-capacitor successive-approximation architecture. The manufacturer describes the family as factory calibrated to minimize all linearity errors, reducing the need for board-level offset, gain, and nonlinearity correction in many applications. The high-speed serial interface provides a compact connection to a controller or programmable logic device. Because the converter uses an internal 2.5 V reference, designers should budget for the resulting input range and avoid assuming that the full 5 V supply can be applied directly to the analog input.

Typical uses include industrial process monitoring, sensor signal acquisition, instrumentation, communications equipment, and embedded control systems where a 16-bit measurement interface is needed without a high-speed parallel bus. The 100 kSPS rate is appropriate for many slowly changing analog quantities, including temperature, pressure, position, and analog instrumentation signals. The part can also support repeated sampling when the application requires more frequent updates than a slow sensor naturally produces.

Layout should preserve a quiet analog return path and keep the serial clock and data traces away from sensitive input routing. Decoupling should be placed close to the supply pins, and unused inputs should be handled according to the manufacturer pin-description table. Designers should also check acquisition timing against the serial clock rate and digital control timing rather than assuming that the maximum sample rate is suitable for every signal or data-capture implementation.

This product page consolidates the manufacturer specifications, package information, sourcing context, and engineering guidance for the AD977BRSZ. It also identifies the closely related family members that can support replacement decisions while making clear that a physical footprint match alone does not guarantee identical conversion throughput.

Alternatives de remplacement direct pour AD977BRSZ — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec AD977BRSZ (même facteur de forme et même empreinte) — différant par Package, Converter Type, Factory Calibration, Throughput Rate, Architecture.

Analog Devices
Package: 28-pin SSOP, 0.209 inch / 5.30 mm width
Converter Type: Successive-approximation register ADC
Throughput Rate: 200 kSPS
Comparer avec AD977BRSZ →
Analog Devices
Package: 28-SSOP
Converter Type: 16-bit successive-approximation ADC
Factory Calibration: Factory calibrated
Comparer avec AD977BRSZ →
Analog Devices
Package: 28-pin SSOP
Comparer avec AD977BRSZ →
Analog Devices
Package: 20-SOIC
Converter Type: Successive-approximation ADC (SAR)
Factory Calibration: Factory calibrated to minimize linearity error
Comparer avec AD977BRSZ →

AD977BRS

✅ Remplacement direct
Analog Devices
📦 28-pin SSOP
16 bit · 100 kSPS · Successive-approximation switched-capacitor ADC · 5 V · 1 input · Serial I/O · 0 V to 5 V · 0 V to 4 V

Contactez-nous pour le prix

Voir la fiche technique →

AD977BRZ

✅ Remplacement direct
Analog Devices
📦 28-pin SSOP
Successive-approximation ADC (SAR) · 16 bit · 100 kSPS · 1 input · 5 V · 2.5 V · High-speed serial interface · 20-SOIC

Contactez-nous pour le prix

Voir la fiche technique →

AD977BRSZ Valeurs maximales et caractéristiques électriques

Résolution 16 bit
Architecture Successive approximation (SAR)
Input Type Single input
Throughput Rate 100 kSPS
Supply Voltage Range 4.75 V to 5.25 V
Internal Reference Voltage 2.5 V
Data Interface Serial, SPI
Power Dissipation 100 mW maximum
Power-Down Mode 50 W maximum input power
Température de fonctionnement -40°C to +85°C
Boîtier 28-pin SSOP, 5.30 mm width
Package Pitch 0.65 mm
Type de montage Surface mount
Factory Calibration Minimizes all linearity errors

Guide de configuration des broches du AD977BRSZ 0.65 mm

Configuration des broches du AD977BRSZ (boîtier 0.65 mm). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier 0.65 mm pour le AD977BRSZ

Aucune donnée de brochage détaillée disponible pour AD977BRSZ.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

AD977BRSZ convient pour 6 applications: Industrial Sensor Signal Acquisition, Process Control Monitoring, Precision Test and Measurement, Communications and Data Acquisition, Position and Motor Feedback, Battery-Powered Embedded Measurement.

🏭

Industrial Sensor Signal Acquisition

The AD977BRSZ fits industrial sensor acquisition when the measured signal changes slowly enough for a 100 kSPS SAR conversion rate. Its 16-bit resolution provides 65,536 digital codes across the converter's specified analog-input range, while the single 4.75 V to 5.25 V supply simplifies power planning around 5 V instrumentation. A typical circuit buffers the sensor with an amplifier, applies suitable filtering, and presents the analog signal to the ADC input. The internal 2.5 V reference and factory calibration reduce calibration burden, although input-referred noise, settling time, and sensor drive impedance still determine overall measurement accuracy.

⚡

Process Control Monitoring

The AD977BRSZ can digitize slow process variables such as temperature, pressure, level, or valve position for a programmable controller. A 100 kSPS throughput rate gives the control loop many more samples than most thermal or mechanical process variables require, while the compact 28-pin SSOP preserves board area. The serial interface reduces trace count compared with a parallel ADC, but the controller must generate the required clock and correctly interpret conversion timing. Firmware should also reject samples acquired during settling or transient periods so the controller acts on stable measurements.

🔧

Precision Test and Measurement

The 16-bit AD977BRSZ is appropriate for instrumentation that converts a conditioned analog measurement into a digital value for display, logging, or calibration. Its 100 kSPS sampling rate is suitable for many laboratory and bench instruments that prioritize resolution and stable references over very high conversion speed. The internal 2.5 V reference and factory calibration support repeatable measurements, but instrument accuracy also depends on the input amplifier's offset, drift, noise, and settling behavior. Grounding and decoupling must be designed so the ADC reference and analog input remain insensitive to digital switching activity.

🌐

Communications and Data Acquisition

The AD977BRSZ can serve as the conversion element in compact communications or data-acquisition equipment that accepts a bounded analog input and uses a serial data link. The 28-pin SSOP package supports space-constrained board layouts, and the high-speed serial interface can coexist with digital control and communications circuitry on the same assembly. At 100 kSPS, the ADC can generate 100,000 samples each second before protocol overhead. The system clock must meet the serial-interface requirements, and sampled data should be framed unambiguously so that command latency, packet boundaries, and acquisition timing remain deterministic.

🖥️

Position and Motor Feedback

The AD977BRSZ is suitable for digitizing position or potentiometer-based feedback signals where a 16-bit measurement interface is needed but high-bandwidth motor sampling is unnecessary. A buffered resistive divider or ratiometric sensor can feed the converter while the controller reads the result through the serial interface. The 100 kSPS rate supports frequent refresh in many feedback loops, but mechanical or electrical settling must be allowed before each conversion. Designers should also evaluate the sensor's noise and the ADC input network against the required angular or positional resolution rather than assuming that nominal bit depth alone defines usable accuracy.

🔋

Battery-Powered Embedded Measurement

The AD977BRSZ supports compact embedded measurement systems that require 16-bit readings from a single 5 V rail. Its low-power SAR architecture and listed 100 mW maximum dissipation make it suitable for instrumentation in which conversion energy and board area matter. The power-down mode can reduce consumption during inactive intervals, although actual system savings depend on how the converter is sequenced and how long it remains disabled. Designers should include a local 5 V source with adequate transient response, place bypass capacitance near the supply pins, and preserve a low-noise analog return path for best conversion repeatability.

What are the key specifications of AD977BRSZ that engineers should know?
The AD977BRSZ is a 16-bit, single-input SAR ADC with a 100 kSPS sampling rate in a 28-pin SSOP package. It operates from a single 4.75 V to 5.25 V supply, includes an internal 2.5 V reference, and provides a serial SPI interface. According to the Analog Devices AD977 product page, the AD977 family is factory calibrated to minimize linearity errors and has a maximum listed power dissipation of 100 mW.
What is the operating voltage of AD977BRSZ?
The AD977BRSZ operates from a single 5 V supply, with a specified range of 4.75 V to 5.25 V. The converter also contains an internal 2.5 V reference. According to the Analog Devices AD977 product page, the internal reference is part of the switched-capacitor SAR architecture, so the input range and signal-conditioning design should be calculated from the converter's specified analog-input behavior rather than from the full supply voltage.
What is the sampling rate of AD977BRSZ?
The AD977BRSZ has a 100 kSPS throughput rate. The Analog Devices AD977 product page distinguishes this device from the AD977A, which operates at 200 kSPS. A 100 kSPS rate is suitable for many instrumentation and industrial sensor signals, but the complete acquisition timing must include serial-clock activity, conversion latency, and the controller's handling of the resulting 16-bit code.
What type of ADC is AD977BRSZ?
The AD977BRSZ is a 16-bit successive-approximation, or SAR, analog-to-digital converter with one analog input. According to the Analog Devices AD977 product page, its switched-capacitor implementation uses an internal 2.5 V reference and a high-speed serial interface. SAR converters are commonly used when moderate throughput, compact pin count, and straightforward digital sampling control are more important than simultaneous multi-channel conversion.
Where can I download the AD977BRSZ datasheet PDF?
The official AD977BRSZ documentation begins with the Analog Devices AD977 product page at https://www.analog.com/en/products/ad977.html. That page provides the manufacturer datasheet and product information for the AD977 and AD977A families. For implementation details, use the pin-description table, electrical-characteristics table, and timing diagrams in the manufacturer datasheet when assigning PCB pins and configuring the serial interface.
Where can I find the AD977BRSZ pinout?
The AD977BRSZ pinout is documented in the Analog Devices AD977 manufacturer datasheet and should be used as the authority for PCB routing. The device uses a 28-pin SSOP package with a 0.65 mm pitch, and its interface includes power, ground, analog input, reference, clock, data, and control connections. Use the package drawing and pin-description table together so that signal assignment and physical orientation remain consistent.
Where can I buy AD977BRSZ online and what is the current price?
AD977BRSZ availability and current commercial terms can be requested through the Request a Quote form on this page. The form is the appropriate route for checking exact package markings, quantity requirements, current stock, and lead time. Because this is an older catalog device, request the latest lifecycle and sourcing status before committing a production BOM, particularly when no alternate sourcing channel is approved.
What is the lead time for AD977BRSZ?
The current lead time for AD977BRSZ should be confirmed through the Request a Quote form on this page. Lead time can vary with quantity, package marking, and replenishment status, and no fixed delivery interval is stated on the manufacturer product page. Engineers should request a written quotation that includes quantity, production schedule, and traceability requirements before treating the component as available for a new build.
Is AD977BRSZ in stock?
Current AD977BRSZ stock status should be checked through the Request a Quote form on this page. The manufacturer product page identifies the AD977 family and its technical capabilities, but stock can change independently of the product's lifecycle state. Submit the required quantity and package marking with the request so the manufacturing team can confirm the exact AD977BRSZ configuration rather than a related family member.
AD977BRSZ vs AD977BRS - which is better for a 28-pin SSOP design?
AD977BRS and AD977BRSZ are closely related 16-bit, 100 kSPS AD977-family devices in a 28-pin SSOP, so their core conversion specifications align. The manufacturer product page confirms the 100 kSPS throughput for the AD977 family. Before replacing one ordering code with the other, check the ordering guide and package markings for temperature grade, finish, packing, and regulatory details rather than relying on the shared device family alone.
AD977BRSZ vs AD977BRZ - can AD977BRZ replace AD977BRSZ?
AD977BRZ is a physically related 28-pin SSOP version of the 16-bit, 100 kSPS AD977 converter, but the suffix differences can encode ordering and finish information. According to the Analog Devices AD977 product page, both names belong to the same 100 kSPS AD977 family. Verify the ordering information, temperature range, and lead-finish requirements before treating AD977BRZ as a production drop-in replacement for AD977BRSZ.
When should I choose AD977BRSZ over another AD977-family converter?
Choose AD977BRSZ when the design requires a 16-bit SAR ADC, a 100 kSPS sampling rate, a single 4.75 V to 5.25 V supply, and a 28-pin SSOP interface. According to the Analog Devices AD977 product page, the AD977A reaches 200 kSPS, so it is the faster family option but is not parameterally equivalent. Select AD977BRSZ when its lower sampling rate is sufficient and the required ordering, temperature, and finish configuration matches.
Is AD977BRSZ suitable for industrial sensor acquisition?
The AD977BRSZ is suitable for many industrial sensor-acquisition circuits because it provides 16-bit resolution at 100 kSPS with a single 5 V supply and a -40°C to +85°C operating-temperature range. The Analog Devices AD977 product page confirms its calibrated SAR architecture and internal 2.5 V reference. The input amplifier, protection network, grounding, and reference-noise performance must still be matched to the sensor and measurement bandwidth.
What is the best drop-in replacement for AD977BRSZ?
AD977BRS is the closest documented same-package candidate for the AD977BRSZ because it is identified as a 16-bit, 100 kSPS, 28-pin SSOP member of the AD977 family. The Analog Devices AD977 product page confirms the family's shared architecture and sampling rate. Before replacement, verify the manufacturer ordering guide for temperature grade, lead finish, packing, and any required regulatory or customer documentation.
What can replace AD977BRSZ in a pin-compatible 28-pin SSOP circuit?
AD977BRS and AD977BRZ are the closest documented 28-pin SSOP alternatives to AD977BRSZ, while retaining the 16-bit resolution and 100 kSPS class associated with the AD977 family. According to the Analog Devices AD977 product page, the core AD977 conversion specifications match. A qualified engineer should still compare the ordering codes, supply limits, temperature ratings, reference behavior, and serial-interface timing before approving a substitute.
Is there an Analog Devices equivalent for AD977BRSZ with 200 kSPS performance?
The AD977A is the related Analog Devices family member rated at 200 kSPS, compared with 100 kSPS for AD977BRSZ. According to the Analog Devices AD977 product page, the AD977 family uses a 16-bit SAR architecture, a single 5 V supply, an internal 2.5 V reference, and a high-speed serial interface. Because the sampling rate doubles, AD977A-family variants should be treated as design alternatives rather than automatic drop-in replacements.

Données de référence d'ingénierie pour AD977BRSZ — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose AD977BRSZ for a 16-bit measurement channel that needs a 100 kSPS sampling rate, a single 5 V supply, an internal 2.5 V reference, and a 28-pin SSOP footprint. It is appropriate for industrial sensors, process monitoring, instrumentation, and compact embedded acquisition systems. AD977BRS is the closest documented same-family alternative when its ordering suffix, temperature grade, finish, and packing satisfy the project requirements. AD977BRZ offers the same principal conversion specifications but requires the same suffix-level review. The related AD977A family reaches 200 kSPS and should be selected when twice the sampling rate is necessary, but it should not be treated as an automatic drop-in replacement because its throughput and acquisition timing differ. In every case, verify the manufacturer ordering guide, pinout, electrical limits, and lifecycle status before releasing production artwork.

Comparaison avec les alternatives

Paramètre Ce produit AD977BRS AD977BRZ
Package 28-pin SSOP, 0.65 mm pitch 28-pin SSOP 28-pin SSOP
Brand Analog Devices Analog Devices Analog Devices
Resolution 16 bit 16 bit 16 bit
Throughput Rate 100 kSPS 100 kSPS 100 kSPS
Architecture Successive approximation (SAR) Successive approximation (SAR) Successive approximation (SAR)
Supply Voltage Range 4.75 V to 5.25 V 4.75 V to 5.25 V 4.75 V to 5.25 V
Internal Reference 2.5 V 2.5 V 2.5 V
Data Interface Serial, SPI Serial, SPI Serial, SPI
Power Dissipation 100 mW maximum 100 mW maximum 100 mW maximum
Operating Temperature -40°C to +85°C -40°C to +85°C -40°C to +85°C

Principaux différenciateurs

  • Matches the core AD977 family conversion specifications (vs AD977BRS)
  • Offers the same 100 kSPS performance class in a related ordering code (vs AD977BRZ)
  • Uses a compact 28-pin serial-interface package (vs AD977BRS)

Notes de conception

Place the 5 V bypass capacitor close to the converter's supply and ground pins, and keep the return current out of the sensitive analog-input path. The converter operates over 4.75 V to 5.25 V, so the source should remain within this range under load and transient conditions. If the analog front end uses a regulated rail derived from a switching converter, allow additional filtering or an appropriately placed linear stage when converter ripple could affect the measurement.

Route the analog input directly from the sensing or conditioning circuit and keep the serial clock, data, and control traces away from the input node. Use a continuous ground plane and place input-side bypass or filtering components where they can isolate the source without creating long, high-impedance routes. Follow the manufacturer package drawing and pin-description table for the 28-pin SSOP orientation before defining the footprint and assembly land pattern.

Do not treat the 5 V supply as the converter's full-scale input range. The AD977 family includes an internal 2.5 V reference, so the analog input must be conditioned to remain within the ADC's specified input range. Also verify acquisition timing at 100 kSPS: the serial clock, conversion latency, data-valid interval, and controller response must satisfy the datasheet timing sequence before sampling is increased.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The manufacturer product page does not provide explicit component-level RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements for this ordering code. AEC-Q100 is not applicable because this product is not an automotive-qualified ordering variant.

Données vérifiées le : 2026-11-15 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

AD977BRSZ datasheet AD977BRSZ specifications AD977BRSZ pinout AD977BRSZ datasheet pdf Analog Devices AD977BRSZ AD977BRSZ 16 bit ADC AD977BRSZ 100 kSPS AD977BRSZ SSOP package AD977BRSZ equivalent AD977BRSZ replacement AD977BRSZ vs AD977BRS AD977BRSZ price AD977BRSZ stock AD977BRSZ application circuit

Composants & termes associés

Analog Devices AD977BRSZ AD977BRS AD977BRZ AD977 AD977A Analog-to-digital converter ADC Successive approximation ADC SAR ADC Switched-capacitor ADC Single-input ADC 16-bit resolution 100 kSPS sampling rate Serial SPI interface Internal 2.5 V reference Factory calibration Power-down mode 28-pin SSOP 0.65 mm package pitch Industrial sensor acquisition Process monitoring Precision instrumentation Embedded measurement
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ