Analog Devices

AD977CRS - 16-Bit 100 kSPS Serial ADC | Analog Devices

Référence : AD977CRS ✓ Actif
5 V Vdss 28-pin SSOP Package
MOQ : 1 |

AD977CRS Présentation

The Analog Devices AD977CRS is a 16-bit, 100 kSPS, single-input successive-approximation analog-to-digital converter designed for high-speed data acquisition. It operates from a single 5 V supply, dissipates no more than 100 mW, and is offered in a 28-pin SSOP package. The converter uses a factory-calibrated switched-capacitor architecture and provides serial output for compact instrumentation and embedded measurement systems.

An ADC converts an analog input voltage into a numeric code that digital hardware can process, store, transmit, or analyze. The AD977CRS belongs to the successive-approximation, or SAR, ADC family within the broader data-converter and signal-processing hierarchy. SAR ADCs compare the unknown input against an internal reference through a series of conversion steps, making them practical for precision measurements where resolution, throughput, power consumption, and circuit complexity must be balanced.

The AD977CRS combines a 16-bit conversion resolution with a 100 kSPS throughput rate. It supports single 5 V operation, which can simplify analog and digital supply planning in compact systems. Maximum power dissipation is 100 mW, and the device includes a power-down mode. Factory calibration, comprehensive DC and AC testing, and specified SNR and THD performance support repeatable acquisition results.

Internally, the AD977 uses a factory-calibrated switched-capacitor architecture. Its serial interface reduces the number of data connections required compared with a parallel ADC, allowing a smaller package and more compact PCB layout. The AD977 family also offers an external-reference selection and multiple input-range options, but exact values for the AD977CRS configuration should be confirmed against the manufacturer datasheet before finalizing analog front-end design.

Typical uses include industrial process measurement, instrumentation, laboratory data acquisition, vibration monitoring, and embedded sensor conditioning. The 100 kSPS rate supports continuous acquisition of moderately fast analog waveforms, while the 16-bit code width provides 65,536 nominal digital levels. Serial output is especially useful where connector count and board area are more restrictive than maximum bus throughput.

Design the reference and input network carefully because ADC accuracy depends on source impedance, reference stability, capacitor selection, grounding, and control of digital return currents. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks. Confirm the selected input range, reference arrangement, sampling dynamics, and acquisition timing against the AD977 datasheet before production release.

This page organizes the AD977CRS specifications, sourcing information, application guidance, comparison fields, and design checks needed to evaluate the converter for a new measurement system.

Alternatives de remplacement direct pour AD977CRS — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec AD977CRS (même facteur de forme et même empreinte) — différant par Package, Supply Voltage, Architecture, Converter Type, Number of Input Channels.

Analog Devices
Package: 28-pin SSOP (RS-28)
Supply Voltage: 5 V single supply
Number of Input Channels: 1
Comparer avec AD977CRS →
Analog Devices
Package: 20-lead SOIC
Architecture: Single input, single SAR conversion channel
Converter Type: Successive approximation register (SAR) ADC
Comparer avec AD977CRS →

Aucune alternative de remplacement direct disponible pour ce produit.

Demander des alternatives

AD977CRS Valeurs maximales et caractéristiques électriques

Converter Type 16-bit successive-approximation ADC
Résolution 16 bit
Throughput Rate 100 kSPS
Number of Inputs 1 input
Architecture Factory-calibrated switched-capacitor SAR
Output Interface Serial
Tension d'alimentation 5 V
Power Supply Type Single supply
Maximum Power Dissipation 100 mW
Power-Down Mode Yes
Boîtier 28-pin SSOP
Type de montage Surface mount

Guide de configuration des broches du AD977CRS 28-pin ssop

Configuration des broches du AD977CRS (boîtier 28-pin ssop). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier 28-pin ssop pour le AD977CRS

Aucune donnée de brochage détaillée disponible pour AD977CRS.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

AD977CRS convient pour 6 applications: Industrial Process Measurement, Laboratory Data Acquisition, Vibration and Condition Monitoring, Embedded Sensor Interfaces, Audio and Communications Measurement, Power and Drive System Diagnostics.

🏭

Industrial Process Measurement

The AD977CRS suits process-monitoring systems that acquire sensor signals at up to 100 kSPS while retaining 16-bit numerical resolution. Its 16-bit code width provides 65,536 nominal levels, while the serial output limits the number of interconnects required between the converter and a controller. The single 5 V supply and 100 mW maximum power dissipation simplify embedded acquisition hardware. The analog front end should convert the sensor output into the selected AD977 input range, provide suitable source impedance, and use filtering matched to the process bandwidth. Firmware should verify that the sample rate does not exceed 100 kSPS.

🖥️

Laboratory Data Acquisition

The AD977CRS can serve as the conversion stage in a laboratory instrument that combines analog conditioning with digital capture. Its 100 kSPS throughput supports continuously sampled waveforms whose useful bandwidth is compatible with that rate, while 16-bit resolution improves the distinction between closely spaced measurements. The serial interface helps reduce board width in bench-oriented equipment, and the single 5 V supply simplifies rail planning. For laboratory accuracy, use a low-noise reference, shielded analog routing, calibrated input attenuation, and software correction for the gain, offset, and linearity characteristics specified by the manufacturer.

📱

Vibration and Condition Monitoring

The AD977CRS is appropriate for vibration, acoustic, and condition-monitoring systems that need synchronized acquisition from multiple conditioned sensor channels. The 100 kSPS limit supports a broad range of low- and mid-frequency monitoring tasks when paired with suitable anti-alias filtering. Its 16-bit resolution captures small amplitude variations, and its factory-calibrated switched-capacitor architecture supports repeatable conversion performance. Use an anti-alias filter whose cutoff and phase behavior meet the analysis bandwidth, then keep sensor returns, reference routing, and digital clock lines separated to reduce correlated noise in the captured data.

🧩

Embedded Sensor Interfaces

The AD977CRS can digitize analog outputs from pressure, temperature, flow, or position sensors in compact embedded equipment. A 100 kSPS rate is more than adequate for many slowly varying process variables and permits the same converter to capture transient events generated by the conditioned sensor signal. The 16-bit resolution supports fine-grained measurement, while serial output reduces wiring compared with a parallel ADC. Configure the input stage for the intended unipolar or bipolar range, observe acquisition-time requirements, and confirm whether an internal or external reference best matches the accuracy and power budget of the system.

🌐

Audio and Communications Measurement

The AD977CRS can be applied to communications and audio test equipment when the measured bandwidth is compatible with a 100 kSPS conversion rate. Its 16-bit resolution is appropriate for capturing signal levels with finer granularity than an 8-bit converter, while the serial interface supports integration with digital processing hardware. The converter's stated SNR and THD characteristics must be checked against the required measurement bandwidth and input level. Use an appropriate anti-alias filter, a stable reference, controlled input attenuation, and careful grounding so that converter performance is not obscured by the analog front end.

⚡

Power and Drive System Diagnostics

The AD977CRS is suitable for diagnostic systems that monitor control signals, actuator feedback, or power-converter status. A 100 kSPS rate captures control-loop events with useful temporal resolution, and 16-bit output retains detail in measurements where operating quantities change over a limited range. The single 5 V supply and 100 mW maximum dissipation simplify integration near powered equipment. Keep high-current switching paths physically separated from the ADC input and reference nodes, use common-mode control appropriate to the selected input range, and place filtering close to the converter to prevent switching transients from reaching the sampled signal.

What is the AD977CRS?
The AD977CRS is a 16-bit, 100 kSPS, single-input SAR ADC from Analog Devices. According to the manufacturer product page, the AD977 family uses a factory-calibrated switched-capacitor architecture, operates from a single 5 V supply, and includes a serial interface. The AD977CRS is packaged in a 28-pin SSOP, making it suitable for compact high-speed data-acquisition equipment where conversion resolution and throughput are both important.
What is the conversion throughput of the AD977CRS?
The AD977CRS converts at 100 kSPS with 16-bit resolution. Analog Devices specifies the related AD977A at 200 kSPS, but the AD977CRS belongs to the 100 kSPS AD977 configuration. Use the 100 kSPS limit when sizing sample-and-hold bandwidth, calculating acquisition time, and estimating whether the converter can follow a changing input waveform.
What supply voltage does the AD977CRS require?
The AD977CRS operates from a single 5 V supply. According to the AD977 manufacturer product page, this single-supply arrangement supports simpler system power architecture than a split analog-and-digital supply design. Maximum power dissipation is 100 mW, so supply planning should account for both the 5 V rail requirement and the converter's stated operating power.
What is the output interface of the AD977CRS?
The AD977CRS uses a serial output interface. According to the AD977 family description, the converter is a 16-bit SAR ADC with a serial interface, while the available part information identifies the AD977CRS as a 28-pin SSOP device. Serial signaling reduces PCB routing and connector requirements compared with a 16-bit parallel bus, although it requires a controller or FPGA capable of receiving serialized conversion data.
Where can I download the AD977CRS datasheet PDF?
The official AD977CRS technical documents are reached through the Analog Devices AD977 product page at analog.com. The manufacturer page provides the authoritative product overview and links to the device documentation. Use the manufacturer datasheet for the complete pin-description table, electrical characteristics, input-range configuration, reference circuit, timing diagrams, and package outline before laying out or releasing a PCB.
Where can I find the AD977CRS pinout?
The AD977CRS pinout is documented in the manufacturer datasheet under the pin-description and package-drawing sections for the 28-pin SSOP. The AD977CRS uses a 28-pin surface-mount package. Use the numbered package drawing and pin-description table together, because the physical pin positions and electrical names must both be checked before assigning analog, reference, digital, clock, and power connections.
What input ranges are available for the AD977CRS?
The AD977 family supports selectable unipolar and bipolar input arrangements, but the exact AD977CRS range depends on the configured reference and the exact device variant. The manufacturer documentation should be used to confirm whether the configured input is unipolar or bipolar and whether the conversion uses an internal or external reference. Do not select input-range components until the corresponding voltage and full-scale equations have been verified.
How much power does the AD977CRS dissipate?
The AD977CRS dissipates no more than 100 mW under the conditions specified by Analog Devices. It operates from a single 5 V supply and includes a power-down mode for systems that do not require continuous conversion. Use the 100 mW figure for a preliminary thermal budget, then confirm worst-case supply, reference, and output conditions against the manufacturer datasheet.
Is the AD977CRS suitable for data acquisition and instrumentation?
Yes, the AD977CRS is suitable for 16-bit data acquisition at up to 100 kSPS. Its factory-calibrated switched-capacitor SAR architecture, serial output, single 5 V operation, and 100 mW maximum power dissipation fit compact instrumentation. The converter is especially appropriate when the analog front end, digital controller, and acquisition software require predictable timing without a parallel data bus.
What can replace the AD977CRS?
No drop-in replacement can be confirmed from the available cross-reference results for the AD977CRS. The AD977ABRS appears in comparison results and uses the AD977 family, but it is associated with the faster 200 kSPS AD977A configuration rather than the 100 kSPS AD977CRS, so it is not a valid 30%-proximity drop-in match. A replacement should require verified 28-pin SSOP pin compatibility, 16-bit resolution, 100 kSPS throughput, 5 V operation, and matching input/reference functions.
Is AD977ABRS the same as AD977CRS?
No, AD977ABRS should not be treated as identical to AD977CRS. The AD977 family page distinguishes the AD977 at 100 kSPS from the AD977A at 200 kSPS, and cross-reference results explicitly compare AD977ABRS with AD977CRS. Although both belong to the same converter family, the doubled throughput and related configuration differences must be reviewed before considering a board-level substitution.
AD977CRS vs AD977ABRS: which is better for acquisition?
Choose AD977CRS when the design specifically requires the 100 kSPS AD977 configuration, and choose AD977ABRS when the faster 200 kSPS AD977A behavior is appropriate. The AD977 family documentation establishes the 100 kSPS versus 200 kSPS distinction. Because the throughput difference is 100 percent and the cross-reference material does not prove identical pin behavior, AD977ABRS is not a guaranteed drop-in replacement for AD977CRS.
When should I choose the AD977CRS over a faster ADC?
Choose the AD977CRS when 16-bit resolution at 100 kSPS satisfies the acquisition rate and lower conversion demand improves system simplicity. It uses a single 5 V supply and is limited to 100 mW maximum power dissipation. A faster converter is appropriate only when the signal bandwidth requires more than 100 kSPS, because replacing it with the 200 kSPS AD977A family changes a core throughput parameter.
Is the AD977CRS suitable for industrial sensor measurement?
The AD977CRS is suitable for industrial sensor measurement when the required sampling rate is no greater than 100 kSPS and the system can accept a 16-bit serial-output converter. Its single 5 V supply and 100 mW maximum dissipation simplify embedded acquisition. The analog front end must still provide low-noise reference voltage, suitable source impedance, filtering, and grounding for the sensor being measured.
How do I design the reference and input network for the AD977CRS?
Design the reference and input network from the AD977 manufacturer application information and the exact AD977CRS electrical tables. Confirm the selected input range, reference source, source impedance, acquisition time, and external component values before calculation. Keep sensitive analog traces short, provide a clean return path, and place required bypass and filtering capacitors close to their associated pins.
Where can I buy the AD977CRS and check current lead time?
Use the Request a Quote form on this page to request the AD977CRS price, current availability, lead time, and order quantity. The form is the appropriate route for a quote tied to the exact 28-pin SSOP ordering code. A lifecycle assessment should also consider whether an alternate ADC with a different throughput, interface, package, or analog specification would require design changes.

Données de référence d'ingénierie pour AD977CRS — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the AD977CRS when a design requires 16-bit resolution, serial output, a single 5 V supply, and a maximum conversion rate of 100 kSPS. Its 100 mW maximum dissipation and 28-pin SSOP package are useful for compact acquisition systems. Do not substitute the AD977ABRS merely because it belongs to the same family: that part is associated with the 200 kSPS AD977A configuration, making the throughput difference 100 percent and preventing a guaranteed drop-in conclusion. If another converter is considered, require confirmation of the 28-pin SSOP footprint, pin functions, input range, reference arrangement, serial timing, acquisition behavior, and environmental ratings. A functional ADC with a different package or interface may require PCB and firmware changes even when its nominal resolution matches.

Comparaison avec les alternatives

Paramètre Ce produit
Brand Analog Devices
Package 28-pin SSOP
Resolution 16 bit
Throughput Rate 100 kSPS
Number of Inputs 1 input
Output Interface Serial
Supply Voltage 5 V
Maximum Power Dissipation 100 mW
Architecture Factory-calibrated switched-capacitor SAR

Principaux différenciateurs

  • 100 kSPS throughput in a 16-bit converter (vs AD977ABRS)
  • Single 5 V supply operation (vs AD977ABRS)
  • Factory-calibrated switched-capacitor SAR architecture (vs AD977ABRS)

Notes de conception

Place the required bypass and filtering capacitors close to the AD977CRS supply, reference, and analog-input pins. Keep the analog input path short, use a continuous ground reference beneath the analog section, and route serial clock and data outputs away from sensitive input traces. The exact component values and topology must follow the AD977 manufacturer datasheet for the selected input range and reference configuration.

Treat the serial interface as a timing-sensitive digital subsystem. Use controlled-impedance routing where appropriate, provide a clean clock reference, and observe the converter's acquisition and conversion timing before selecting the digital controller's read rate. Avoid adding unnecessary long stubs between the AD977CRS and the receiving logic because they can degrade signal integrity at the interface's upper operating frequency.

Do not confuse the 100 kSPS AD977CRS with the 200 kSPS AD977A configuration. Confirm the exact ordering code, input range, reference arrangement, temperature rating, and 28-pin SSOP pin mapping during design review. Use the manufacturer pin-description table rather than inferring connections from another member of the AD977 family, particularly when the design depends on the AD977A or AD977ABRS.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

Compliance attributes were not stated in the available product information and require confirmation from Analog Devices or the manufacturer datasheet.

Données vérifiées le : 2026-11-10 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

AD977CRS datasheet AD977CRS pinout AD977CRS datasheet pdf AD977CRS specifications Analog Devices AD977CRS AD977CRS 16-bit ADC AD977CRS 100 kSPS AD977CRS SSOP-28 AD977CRS equivalent AD977CRS replacement AD977CRS vs AD977ABRS AD977CRS application circuit AD977CRS price AD977CRS stock

Composants & termes associés

Analog Devices AD977CRS AD977ABRS AD977 AD977A analog-to-digital converter ADC successive-approximation ADC SAR ADC data converter signal-processing IC integrated circuit semiconductor factory-calibrated switched-capacitor architecture serial interface single 5 V supply 100 kSPS 16-bit resolution 100 mW maximum power dissipation power-down mode 28-pin SSOP SSOP family surface-mount package industrial data acquisition instrumentation
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ