ATF16V8BQL-15SC - 15ns 8-Macrocell EE PLD | Microchip
Référence : ATF16V8BQL-15SC ✓ ActifATF16V8BQL-15SC Présentation
A programmable logic device, or PLD, is a semiconductor whose internal logic connections are user-programmable. Within the hierarchy of programmable semiconductor devices, the ATF16V8BQL belongs to the PAL-compatible complex-programmable logic device family. Its electrically erasable Flash-based configuration supports in-circuit reprogramming while retaining the familiar 20-pin architecture of many conventional PAL devices.
The ATF16V8BQL-15SC provides eight outputs, with eight product terms allocated to each output. Up to 16 inputs and 8 I/Os allow designers to consolidate multiple gates, decode signals, qualify control paths, and implement state-machine functions. The device operates from a 5 V supply, has a 15 ns propagation-delay grade, and uses an edge-sensing low-power architecture with a typical standby current of 5 mA.
Input Transition Detection provides an important architectural feature: the ATF16V8B powers down automatically into a low-power mode when inputs remain idle. This behavior makes the device suitable for control systems that spend substantial time waiting for external events. Three configurable operating modes allow software to select the appropriate registered, combinatorial, or complex-programmable architecture for the implemented logic.
Typical uses include industrial sequencing and interlocks, data acquisition and test equipment, legacy interface replacement, address decoding, and compact control logic around microprocessors. The 20-SOIC format also supports conventional surface-mount assembly, while its Flash-based electrically erasable configuration simplifies firmware updates after programming.
When designing the PCB, preserve the 20-SOIC footprint exactly and assign every signal according to the pin-description table in the manufacturer datasheet. Confirm output timing, input rise and fall behavior, supply-voltage tolerance, and unused-pin requirements in the system timing and schematic review rather than inferring them from generic PAL conventions.
This product summary combines the manufacturer device information, programming architecture, practical placement guidance, and same-package replacement analysis. It is intended to help engineers evaluate ATF16V8BQL-15SC for new compact-logic designs and for planned replacements of compatible 20-SOIC programmable logic devices.
Alternatives de remplacement direct pour ATF16V8BQL-15SC — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec ATF16V8BQL-15SC (même facteur de forme et même empreinte) — différant par Device Type, Maximum Inputs, Package, Architecture.
ATF16V8B-15SC
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →ATF16V8BQL-15SI
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ATF16V8BQL-15SU
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →ATF16V8BQL-15SC Valeurs maximales et caractéristiques électriques
| Device Type | 16V8 Programmable Logic Device (PLD) |
| Architecture | PAL-compatible complex-programmable logic device |
| Configuration Technology | Electrically erasable Flash memory |
| Tension d'alimentation | 5 V |
| Macrocells | 8 |
| Maximum Inputs | 16 |
| I/O Count | 8 |
| Outputs | 8 |
| Product Terms per Output | 8 |
| Equivalent Gate Capacity | 250 gates |
| Propagation Delay | 15 ns |
| Typical Standby Current | 5 mA |
| Power-Down Feature | Automatic low-power mode through Input Transition Detection |
| Programmable Operating Modes | 3 modes |
| Boîtier | 20-SOIC |
| Type de montage | Surface Mount |
| Process Technology | CMOS |
Guide de configuration des broches du ATF16V8BQL-15SC 20-soic
Configuration des broches du ATF16V8BQL-15SC (boîtier 20-soic). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour ATF16V8BQL-15SC.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
ATF16V8BQL-15SC convient pour 6 applications: Industrial Sequencing and Interlock Control, Data-Acquisition Control Logic, Legacy PAL Interface Replacement, Test and Measurement Interlocks, Microprocessor Peripheral Control, Embedded Event-Driven Control.
Industrial Sequencing and Interlock Control
The ATF16V8BQL-15SC fits compact sequencing and safety-interlock logic because it combines up to 16 inputs with 8 I/Os, eight outputs, and a 15 ns propagation-delay grade at 5 V. Eight product terms per output allow engineers to implement state transitions, permissive conditions, and machine-start interlocks without filling a board with separate gates. Its automatic low-power behavior is useful when the controller waits between operating events. The 20-SOIC package also supports conventional surface-mount assembly while keeping the logic density modest for review and maintenance.
Recommandé
Data-Acquisition Control Logic
The ATF16V8BQL-15SC is suitable for acquisition systems that require address decoding, control-signal generation, and deterministic input qualification. Its 16-input capacity can combine trigger, range-select, and status signals, while the eight I/Os can operate external switches, converters, or indicators. The 15 ns speed class supports short control paths when system timing margins are defined carefully. Electrically erasable Flash configuration also allows logic updates without replacing the device, which is valuable during instrument development and production reconfiguration.
Recommandé
Legacy PAL Interface Replacement
The ATF16V8BQL-15SC provides a practical migration path for designs using 20-pin PAL-compatible logic. The manufacturer describes the ATF16V8B family as a superset of generic 16R8 architectures, enabling direct replacement of the 16R8 family and most 20-pin combinatorial PLDs. With eight macrocells, eight outputs, and a 15 ns grade, it can consolidate multiple gates or decode functions. Before substitution, verify active-high or active-low output polarity, register or combinatorial mode, unused-pin behavior, and every board-level timing constraint.
Recommandé
Test and Measurement Interlocks
The ATF16V8BQL-15SC can coordinate instrument sequencing, relay-control decisions, and operator-interlock signals in compact test equipment. Its eight outputs are each assigned eight product terms, enabling practical implementations of state machines and command qualifiers. The 15 ns propagation-delay class helps minimize delay in control paths, while edge-sensing Input Transition Detection allows low-power behavior during idle measurement intervals. The 20-SOIC footprint is practical for test fixtures and compact controller boards where discrete logic would consume additional board area.
Recommandé
Microprocessor Peripheral Control
The ATF16V8BQL-15SC is useful for peripheral decoding, bus-interface qualification, and dedicated control functions surrounding a microprocessor. It can combine processor control lines into enables, generate status outputs, and implement small state machines without loading the processor with repetitive decision logic. A 15 ns grade can accommodate short peripheral-selection paths, subject to the complete system timing budget. Electrically erasable Flash configuration permits controlled logic updates, while the 8-macrocell limit keeps the design compact and reviewable.
Recommandé
Embedded Event-Driven Control
The ATF16V8BQL-15SC fits embedded controls that wake to process a limited set of external events. Input Transition Detection circuitry automatically places the device into its low-power state when inputs are idle, with a typical standby current of 5 mA listed by Microchip. This behavior complements designs built around event-driven sensors, operator controls, and periodic machinery. The device can handle up to 16 inputs and 8 I/Os, making it appropriate for consolidating modest control logic while retaining a simple 20-SOIC footprint.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour ATF16V8BQL-15SC — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | ATF16V8B-15SC | ATF16V8BQL-15SI | ATF16V8BQL-15SU |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-SOIC | 20-SOIC - same | 20-SOIC - same | 20-SOIC - same |
| Device Architecture | 16V8 PLD | 16V8 PLD | 16V8 PLD | 16V8 PLD |
| Macrocells | 8 | 8 | 8 | 8 |
| Maximum Inputs | Up to 16 | Up to 16 | Up to 16 | Up to 16 |
| I/O Count | 8 | 8 | 8 | 8 |
| Propagation Delay | 15 ns | 15 ns | 15 ns | 15 ns |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V |
| Automatic Low-Power ITD | Yes | No | Yes | Yes |
Principaux différenciateurs
- Automatic event-driven low-power operation (vs ATF16V8B-15SC)
- Direct 20-SOIC family compatibility (vs ATF16V8B-15SC)
- Consistent programmable logic capacity (vs ATF16V8BQL-15SI)
Notes de conception
Use the 20-SOIC footprint associated with the exact ordering code and verify pin 1 orientation against the manufacturer package drawing. PAL-compatible devices can use signals differently according to their architecture, so preserve each pin assignment from the selected ATF16V8B variant rather than carrying a footprint forward without checking the pin-description table. Keep the programming interface and programming-test pads accessible when in-circuit configuration updates are required.
The BQL architecture powers down automatically through Input Transition Detection when the device is idle, and the manufacturer lists a typical standby current of 5 mA. Confirm that input transitions in the finished design are acceptable to the intended operating mode and that no required output state depends on active operation. Decouple the 5 V supply close to the device according to the datasheet guidance and evaluate output behavior during startup and low-power transitions.
Do not assume that every ATF16V8B ordering code has identical programmable behavior. ATF16V8BQL includes edge-sensing low-power operation, whereas the standard ATF16V8B variant does not. Before a substitution, compare registered versus combinatorial operation, output polarity, unused-pin treatment, temperature requirements, propagation delay, and the programmed test vectors. A physical 20-SOIC match alone does not establish logical equivalence.
Build timing margins from the worst-case system path rather than the nominal 15 ns device grade. Include input rise and fall times, output loading, board propagation delay, and the delay of external control logic. For signals crossing from a slower source, use the input timing information in the manufacturer datasheet and add appropriate conditioning where required. Review asynchronous inputs for metastability risk if they are used as clock or set-reset signals.
Informations de conformité
Use the current manufacturer product page, declaration of compliance, and ordering information to confirm environmental and material compliance for the selected lot.