ATF16V8BQL-15SC - 15ns 8-Macrocell EE PLD | Microchip
MPN: ATF16V8BQL-15SC ✓ 啟用中ATF16V8BQL-15SC 概覽
A programmable logic device, or PLD, is a semiconductor whose internal logic connections are user-programmable. Within the hierarchy of programmable semiconductor devices, the ATF16V8BQL belongs to the PAL-compatible complex-programmable logic device family. Its electrically erasable Flash-based configuration supports in-circuit reprogramming while retaining the familiar 20-pin architecture of many conventional PAL devices.
The ATF16V8BQL-15SC provides eight outputs, with eight product terms allocated to each output. Up to 16 inputs and 8 I/Os allow designers to consolidate multiple gates, decode signals, qualify control paths, and implement state-machine functions. The device operates from a 5 V supply, has a 15 ns propagation-delay grade, and uses an edge-sensing low-power architecture with a typical standby current of 5 mA.
Input Transition Detection provides an important architectural feature: the ATF16V8B powers down automatically into a low-power mode when inputs remain idle. This behavior makes the device suitable for control systems that spend substantial time waiting for external events. Three configurable operating modes allow software to select the appropriate registered, combinatorial, or complex-programmable architecture for the implemented logic.
Typical uses include industrial sequencing and interlocks, data acquisition and test equipment, legacy interface replacement, address decoding, and compact control logic around microprocessors. The 20-SOIC format also supports conventional surface-mount assembly, while its Flash-based electrically erasable configuration simplifies firmware updates after programming.
When designing the PCB, preserve the 20-SOIC footprint exactly and assign every signal according to the pin-description table in the manufacturer datasheet. Confirm output timing, input rise and fall behavior, supply-voltage tolerance, and unused-pin requirements in the system timing and schematic review rather than inferring them from generic PAL conventions.
This product summary combines the manufacturer device information, programming architecture, practical placement guidance, and same-package replacement analysis. It is intended to help engineers evaluate ATF16V8BQL-15SC for new compact-logic designs and for planned replacements of compatible 20-SOIC programmable logic devices.
直接替換替代品,適用於 ATF16V8BQL-15SC — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ATF16V8BQL-15SC (相同外形與佔位) — 差異在於 Device Type, Maximum Inputs, Package, Architecture.
ATF16V8B-15SC
✅ 直接替換聯絡詢價
查看資料表 →ATF16V8BQL-15SI
✅ 直接替換📋 參考替代品(不在目錄中)
ATF16V8BQL-15SU
✅ 直接替換聯絡詢價
查看資料表 →ATF16V8BQL-15SC 最大額定值與電氣特性
| Device Type | 16V8 Programmable Logic Device (PLD) |
| Architecture | PAL-compatible complex-programmable logic device |
| Configuration Technology | Electrically erasable Flash memory |
| 供應電壓 | 5 V |
| Macrocells | 8 |
| Maximum Inputs | 16 |
| I/O Count | 8 |
| Outputs | 8 |
| Product Terms per Output | 8 |
| Equivalent Gate Capacity | 250 gates |
| Propagation Delay | 15 ns |
| Typical Standby Current | 5 mA |
| Power-Down Feature | Automatic low-power mode through Input Transition Detection |
| Programmable Operating Modes | 3 modes |
| 封裝 | 20-SOIC |
| 安裝類型 | Surface Mount |
| Process Technology | CMOS |
ATF16V8BQL-15SC 20-soic 腳位配置指南
ATF16V8BQL-15SC(20-soic 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: ATF16V8BQL-15SC.
請參閱 資料表 以查看完整腳位配置。
典型應用
ATF16V8BQL-15SC 適用於 6 應用s: Industrial Sequencing and Interlock Control, Data-Acquisition Control Logic, Legacy PAL Interface Replacement, Test and Measurement Interlocks, Microprocessor Peripheral Control, Embedded Event-Driven Control.
Industrial Sequencing and Interlock Control
The ATF16V8BQL-15SC fits compact sequencing and safety-interlock logic because it combines up to 16 inputs with 8 I/Os, eight outputs, and a 15 ns propagation-delay grade at 5 V. Eight product terms per output allow engineers to implement state transitions, permissive conditions, and machine-start interlocks without filling a board with separate gates. Its automatic low-power behavior is useful when the controller waits between operating events. The 20-SOIC package also supports conventional surface-mount assembly while keeping the logic density modest for review and maintenance.
推薦
Data-Acquisition Control Logic
The ATF16V8BQL-15SC is suitable for acquisition systems that require address decoding, control-signal generation, and deterministic input qualification. Its 16-input capacity can combine trigger, range-select, and status signals, while the eight I/Os can operate external switches, converters, or indicators. The 15 ns speed class supports short control paths when system timing margins are defined carefully. Electrically erasable Flash configuration also allows logic updates without replacing the device, which is valuable during instrument development and production reconfiguration.
推薦
Legacy PAL Interface Replacement
The ATF16V8BQL-15SC provides a practical migration path for designs using 20-pin PAL-compatible logic. The manufacturer describes the ATF16V8B family as a superset of generic 16R8 architectures, enabling direct replacement of the 16R8 family and most 20-pin combinatorial PLDs. With eight macrocells, eight outputs, and a 15 ns grade, it can consolidate multiple gates or decode functions. Before substitution, verify active-high or active-low output polarity, register or combinatorial mode, unused-pin behavior, and every board-level timing constraint.
推薦
Test and Measurement Interlocks
The ATF16V8BQL-15SC can coordinate instrument sequencing, relay-control decisions, and operator-interlock signals in compact test equipment. Its eight outputs are each assigned eight product terms, enabling practical implementations of state machines and command qualifiers. The 15 ns propagation-delay class helps minimize delay in control paths, while edge-sensing Input Transition Detection allows low-power behavior during idle measurement intervals. The 20-SOIC footprint is practical for test fixtures and compact controller boards where discrete logic would consume additional board area.
推薦
Microprocessor Peripheral Control
The ATF16V8BQL-15SC is useful for peripheral decoding, bus-interface qualification, and dedicated control functions surrounding a microprocessor. It can combine processor control lines into enables, generate status outputs, and implement small state machines without loading the processor with repetitive decision logic. A 15 ns grade can accommodate short peripheral-selection paths, subject to the complete system timing budget. Electrically erasable Flash configuration permits controlled logic updates, while the 8-macrocell limit keeps the design compact and reviewable.
推薦
Embedded Event-Driven Control
The ATF16V8BQL-15SC fits embedded controls that wake to process a limited set of external events. Input Transition Detection circuitry automatically places the device into its low-power state when inputs are idle, with a typical standby current of 5 mA listed by Microchip. This behavior complements designs built around event-driven sensors, operator controls, and periodic machinery. The device can handle up to 16 inputs and 8 I/Os, making it appropriate for consolidating modest control logic while retaining a simple 20-SOIC footprint.
推薦
推薦產品摘要
工程參考資料,適用於 ATF16V8BQL-15SC — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ATF16V8B-15SC | ATF16V8BQL-15SI | ATF16V8BQL-15SU |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-SOIC | 20-SOIC - same | 20-SOIC - same | 20-SOIC - same |
| Device Architecture | 16V8 PLD | 16V8 PLD | 16V8 PLD | 16V8 PLD |
| Macrocells | 8 | 8 | 8 | 8 |
| Maximum Inputs | Up to 16 | Up to 16 | Up to 16 | Up to 16 |
| I/O Count | 8 | 8 | 8 | 8 |
| Propagation Delay | 15 ns | 15 ns | 15 ns | 15 ns |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V |
| Automatic Low-Power ITD | Yes | No | Yes | Yes |
主要差異化特點
- Automatic event-driven low-power operation (對比ATF16V8B-15SC)
- Direct 20-SOIC family compatibility (對比ATF16V8B-15SC)
- Consistent programmable logic capacity (對比ATF16V8BQL-15SI)
設計說明
Use the 20-SOIC footprint associated with the exact ordering code and verify pin 1 orientation against the manufacturer package drawing. PAL-compatible devices can use signals differently according to their architecture, so preserve each pin assignment from the selected ATF16V8B variant rather than carrying a footprint forward without checking the pin-description table. Keep the programming interface and programming-test pads accessible when in-circuit configuration updates are required.
The BQL architecture powers down automatically through Input Transition Detection when the device is idle, and the manufacturer lists a typical standby current of 5 mA. Confirm that input transitions in the finished design are acceptable to the intended operating mode and that no required output state depends on active operation. Decouple the 5 V supply close to the device according to the datasheet guidance and evaluate output behavior during startup and low-power transitions.
Do not assume that every ATF16V8B ordering code has identical programmable behavior. ATF16V8BQL includes edge-sensing low-power operation, whereas the standard ATF16V8B variant does not. Before a substitution, compare registered versus combinatorial operation, output polarity, unused-pin treatment, temperature requirements, propagation delay, and the programmed test vectors. A physical 20-SOIC match alone does not establish logical equivalence.
Build timing margins from the worst-case system path rather than the nominal 15 ns device grade. Include input rise and fall times, output loading, board propagation delay, and the delay of external control logic. For signals crossing from a slower source, use the input timing information in the manufacturer datasheet and add appropriate conditioning where required. Review asynchronous inputs for metastability risk if they are used as clock or set-reset signals.
合規資訊
Use the current manufacturer product page, declaration of compliance, and ordering information to confirm environmental and material compliance for the selected lot.