ATF16V8BQL-15SC - 15ns 8-Macrocell EE PLD | Microchip
MPN: ATF16V8BQL-15SC ✓ פעילATF16V8BQL-15SC סקירה
A programmable logic device, or PLD, is a semiconductor whose internal logic connections are user-programmable. Within the hierarchy of programmable semiconductor devices, the ATF16V8BQL belongs to the PAL-compatible complex-programmable logic device family. Its electrically erasable Flash-based configuration supports in-circuit reprogramming while retaining the familiar 20-pin architecture of many conventional PAL devices.
The ATF16V8BQL-15SC provides eight outputs, with eight product terms allocated to each output. Up to 16 inputs and 8 I/Os allow designers to consolidate multiple gates, decode signals, qualify control paths, and implement state-machine functions. The device operates from a 5 V supply, has a 15 ns propagation-delay grade, and uses an edge-sensing low-power architecture with a typical standby current of 5 mA.
Input Transition Detection provides an important architectural feature: the ATF16V8B powers down automatically into a low-power mode when inputs remain idle. This behavior makes the device suitable for control systems that spend substantial time waiting for external events. Three configurable operating modes allow software to select the appropriate registered, combinatorial, or complex-programmable architecture for the implemented logic.
Typical uses include industrial sequencing and interlocks, data acquisition and test equipment, legacy interface replacement, address decoding, and compact control logic around microprocessors. The 20-SOIC format also supports conventional surface-mount assembly, while its Flash-based electrically erasable configuration simplifies firmware updates after programming.
When designing the PCB, preserve the 20-SOIC footprint exactly and assign every signal according to the pin-description table in the manufacturer datasheet. Confirm output timing, input rise and fall behavior, supply-voltage tolerance, and unused-pin requirements in the system timing and schematic review rather than inferring them from generic PAL conventions.
This product summary combines the manufacturer device information, programming architecture, practical placement guidance, and same-package replacement analysis. It is intended to help engineers evaluate ATF16V8BQL-15SC for new compact-logic designs and for planned replacements of compatible 20-SOIC programmable logic devices.
חלופות תחליף ישיר עבור ATF16V8BQL-15SC — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם ATF16V8BQL-15SC (אותו גורם צורה וטביעת רגל) — שונים ב Device Type, Maximum Inputs, Package, Architecture.
ATF16V8B-15SC
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←ATF16V8BQL-15SI
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ATF16V8BQL-15SU
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←ATF16V8BQL-15SC דירוגים מרביים ומאפיינים חשמליים
| Device Type | 16V8 Programmable Logic Device (PLD) |
| Architecture | PAL-compatible complex-programmable logic device |
| Configuration Technology | Electrically erasable Flash memory |
| מתח אספקה | 5 V |
| Macrocells | 8 |
| Maximum Inputs | 16 |
| I/O Count | 8 |
| Outputs | 8 |
| Product Terms per Output | 8 |
| Equivalent Gate Capacity | 250 gates |
| Propagation Delay | 15 ns |
| Typical Standby Current | 5 mA |
| Power-Down Feature | Automatic low-power mode through Input Transition Detection |
| Programmable Operating Modes | 3 modes |
| מארז | 20-SOIC |
| סוג הרכבה | Surface Mount |
| Process Technology | CMOS |
מדריך תצורת פינים של ATF16V8BQL-15SC 20-soic
תצורת פינים עבור ATF16V8BQL-15SC (מארזת 20-soic). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור ATF16V8BQL-15SC.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
ATF16V8BQL-15SC מתאים עבור 6 יישוםs: Industrial Sequencing and Interlock Control, Data-Acquisition Control Logic, Legacy PAL Interface Replacement, Test and Measurement Interlocks, Microprocessor Peripheral Control, Embedded Event-Driven Control.
Industrial Sequencing and Interlock Control
The ATF16V8BQL-15SC fits compact sequencing and safety-interlock logic because it combines up to 16 inputs with 8 I/Os, eight outputs, and a 15 ns propagation-delay grade at 5 V. Eight product terms per output allow engineers to implement state transitions, permissive conditions, and machine-start interlocks without filling a board with separate gates. Its automatic low-power behavior is useful when the controller waits between operating events. The 20-SOIC package also supports conventional surface-mount assembly while keeping the logic density modest for review and maintenance.
מומלץ
Data-Acquisition Control Logic
The ATF16V8BQL-15SC is suitable for acquisition systems that require address decoding, control-signal generation, and deterministic input qualification. Its 16-input capacity can combine trigger, range-select, and status signals, while the eight I/Os can operate external switches, converters, or indicators. The 15 ns speed class supports short control paths when system timing margins are defined carefully. Electrically erasable Flash configuration also allows logic updates without replacing the device, which is valuable during instrument development and production reconfiguration.
מומלץ
Legacy PAL Interface Replacement
The ATF16V8BQL-15SC provides a practical migration path for designs using 20-pin PAL-compatible logic. The manufacturer describes the ATF16V8B family as a superset of generic 16R8 architectures, enabling direct replacement of the 16R8 family and most 20-pin combinatorial PLDs. With eight macrocells, eight outputs, and a 15 ns grade, it can consolidate multiple gates or decode functions. Before substitution, verify active-high or active-low output polarity, register or combinatorial mode, unused-pin behavior, and every board-level timing constraint.
מומלץ
Test and Measurement Interlocks
The ATF16V8BQL-15SC can coordinate instrument sequencing, relay-control decisions, and operator-interlock signals in compact test equipment. Its eight outputs are each assigned eight product terms, enabling practical implementations of state machines and command qualifiers. The 15 ns propagation-delay class helps minimize delay in control paths, while edge-sensing Input Transition Detection allows low-power behavior during idle measurement intervals. The 20-SOIC footprint is practical for test fixtures and compact controller boards where discrete logic would consume additional board area.
מומלץ
Microprocessor Peripheral Control
The ATF16V8BQL-15SC is useful for peripheral decoding, bus-interface qualification, and dedicated control functions surrounding a microprocessor. It can combine processor control lines into enables, generate status outputs, and implement small state machines without loading the processor with repetitive decision logic. A 15 ns grade can accommodate short peripheral-selection paths, subject to the complete system timing budget. Electrically erasable Flash configuration permits controlled logic updates, while the 8-macrocell limit keeps the design compact and reviewable.
מומלץ
Embedded Event-Driven Control
The ATF16V8BQL-15SC fits embedded controls that wake to process a limited set of external events. Input Transition Detection circuitry automatically places the device into its low-power state when inputs are idle, with a typical standby current of 5 mA listed by Microchip. This behavior complements designs built around event-driven sensors, operator controls, and periodic machinery. The device can handle up to 16 inputs and 8 I/Os, making it appropriate for consolidating modest control logic while retaining a simple 20-SOIC footprint.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור ATF16V8BQL-15SC — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | ATF16V8B-15SC | ATF16V8BQL-15SI | ATF16V8BQL-15SU |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-SOIC | 20-SOIC - same | 20-SOIC - same | 20-SOIC - same |
| Device Architecture | 16V8 PLD | 16V8 PLD | 16V8 PLD | 16V8 PLD |
| Macrocells | 8 | 8 | 8 | 8 |
| Maximum Inputs | Up to 16 | Up to 16 | Up to 16 | Up to 16 |
| I/O Count | 8 | 8 | 8 | 8 |
| Propagation Delay | 15 ns | 15 ns | 15 ns | 15 ns |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V |
| Automatic Low-Power ITD | Yes | No | Yes | Yes |
מבדילים עיקריים
- Automatic event-driven low-power operation (לעומתATF16V8B-15SC)
- Direct 20-SOIC family compatibility (לעומתATF16V8B-15SC)
- Consistent programmable logic capacity (לעומתATF16V8BQL-15SI)
הערות תכנון
Use the 20-SOIC footprint associated with the exact ordering code and verify pin 1 orientation against the manufacturer package drawing. PAL-compatible devices can use signals differently according to their architecture, so preserve each pin assignment from the selected ATF16V8B variant rather than carrying a footprint forward without checking the pin-description table. Keep the programming interface and programming-test pads accessible when in-circuit configuration updates are required.
The BQL architecture powers down automatically through Input Transition Detection when the device is idle, and the manufacturer lists a typical standby current of 5 mA. Confirm that input transitions in the finished design are acceptable to the intended operating mode and that no required output state depends on active operation. Decouple the 5 V supply close to the device according to the datasheet guidance and evaluate output behavior during startup and low-power transitions.
Do not assume that every ATF16V8B ordering code has identical programmable behavior. ATF16V8BQL includes edge-sensing low-power operation, whereas the standard ATF16V8B variant does not. Before a substitution, compare registered versus combinatorial operation, output polarity, unused-pin treatment, temperature requirements, propagation delay, and the programmed test vectors. A physical 20-SOIC match alone does not establish logical equivalence.
Build timing margins from the worst-case system path rather than the nominal 15 ns device grade. Include input rise and fall times, output loading, board propagation delay, and the delay of external control logic. For signals crossing from a slower source, use the input timing information in the manufacturer datasheet and add appropriate conditioning where required. Review asynchronous inputs for metastability risk if they are used as clock or set-reset signals.
מידע על תאימות
Use the current manufacturer product page, declaration of compliance, and ordering information to confirm environmental and material compliance for the selected lot.