ATTINY1607-MN - 20MHz 16KB AVR MCU | Microchip
Référence : ATTINY1607-MN ✓ ActifATTINY1607-MN Présentation
A microcontroller is an integrated circuit containing a processor core, program memory, data memory, and peripherals on one semiconductor die. The ATTINY1607 belongs to the AVR -> tinyAVR -> 8-bit RISC microcontroller hierarchy. It executes firmware locally rather than relying on a host processor, allowing compact products to perform sensing, control, communications, and actuator management with fewer external components.
The principal device characteristics include a 20 MHz maximum clock, 16 KB Flash, 1 KB SRAM, and 256 bytes of EEPROM. Its 1.8 V to 5.5 V operating range supports both low-voltage and conventional 5 V embedded systems. The package also provides 24 electrical positions in a compact 4 x 4 mm footprint, reducing board area where space is constrained.
The device supports modern tinyAVR integration techniques identified by Microchip, including the Event System, SleepWalking functionality, accurate analog features, and advanced peripherals. Event-driven operation can reduce unnecessary processor activity, while SleepWalking allows selected peripheral functions to continue during low-power states. The hardware multiplier improves the execution efficiency of compact multiplication and scaling operations.
Typical uses include closed-loop industrial control, compact sensor nodes, motor and actuator controllers, and low-power embedded products. The 16 KB Flash capacity accommodates application firmware and configuration logic, while 1 KB of SRAM supports working variables and peripheral buffering. The integrated analog and communication functions reduce the component count of small control boards.
PCB design should preserve short, controlled analog and digital paths, provide stable supply decoupling, and route clock-sensitive signals away from high-current switching nodes. Firmware and peripheral configuration should be checked against the manufacturer pin-description and peripheral tables because reuse of a footprint does not automatically guarantee identical signal functions.
This product record combines the manufacturer specifications, exact-package ordering information, sourcing guidance, compatible family candidates, and practical design considerations for engineers evaluating the ATTINY1607-MN in compact low-power embedded systems.
Alternatives de remplacement direct pour ATTINY1607-MN — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
ATTINY1606-MN
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
ATTINY1605-MN
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
ATTINY1614-MN
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
ATTINY1616-MN
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
ATTINY1604-MN
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
ATTINY1607-MN Valeurs maximales et caractéristiques électriques
| Product Type | 8-bit RISC microcontroller |
| Processor Architecture | AVR with hardware multiplier |
| Fréquence d'horloge maximale | 20 MHz |
| Flash Memory | 16 KB |
| Program Memory Organization | 16K x 8 bits |
| SRAM | 1 KB (1024 bytes) |
| EEPROM | 256 bytes |
| Operating Voltage Range | 1.8 V to 5.5 V |
| Boîtier | 24-pin VQFN, 4 x 4 mm |
| Industrial Temperature Range | -40°C to +105°C |
| Type de montage | Surface mount |
| Functional Safety | Functional Safety (FuSa) Microcontroller |
| Peripheral Technology | Core Independent Peripherals (CIPs) |
| Event System | Supported |
| SleepWalking | Supported |
| Integrated Analog Features | Accurate analog features |
| Green Packaging Indicator | Green |
| Statut RoHS | Compliant |
| Order Packaging | Tray |
Guide de configuration des broches du ATTINY1607-MN 24-pin vqfn, 4 x 4 mm
Configuration des broches du ATTINY1607-MN (boîtier 24-pin vqfn, 4 x 4 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour ATTINY1607-MN.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
ATTINY1607-MN convient pour 6 applications: Industrial Closed-Loop Control, Low-Power Sensor Node, Motor and Actuator Control, Compact Communication Interface, Precision Analog Acquisition, Smart Home and IoT Appliance Control.
Industrial Closed-Loop Control
The ATTINY1607-MN fits compact closed-loop controllers because its 20 MHz AVR core provides responsive execution while the 16 KB Flash and 1 KB SRAM hold control logic, working variables, and peripheral state. The device also offers accurate analog features and Core Independent Peripherals for sensor acquisition and deterministic control tasks. Placing the MCU close to the controlled actuator and analog sensor can shorten signal paths and reduce board area. Its 1.8 V to 5.5 V range also supports industrial interface levels common in 24 V systems when appropriate regulation is used. Before layout release, verify the required ADC channels, timer outputs, pin multiplexing, and exposed-pad connection against the manufacturer package drawing.
Recommandé
Low-Power Sensor Node
The ATTINY1607-MN is well suited to a battery- or energy-constrained sensor node because SleepWalking allows selected peripheral activity while the processor enters a low-power state. Its 20 MHz clock and Event System can support responsive, event-driven measurement without continuous polling, while 1 KB of SRAM provides working space for sampled values and status flags. The 24-pin VQFN 4 x 4 mm package also reduces board area when the sensor, regulator, and radio occupy most of the available space. Engineering teams should choose a clock configuration that satisfies the sampling deadline, disable unused peripherals, and measure sleep current in the assembled design. ADC channels, wake-up sources, and pin assignments must be confirmed in the manufacturer documentation.
Recommandé
Motor and Actuator Control
The ATTINY1607-MN can manage small motors, valves, relays, and other actuators where a 20 MHz control core and timer-driven outputs improve timing consistency. Its 16 KB Flash is sufficient for motion logic and state machines, and the 1 KB SRAM can hold position, speed, and sequencing variables. Core Independent Peripherals can offload repetitive events, reducing the processing burden on the AVR core. For an industrial or motor-control board, the MCU's 1.8 V to 5.5 V operating range allows it to share a regulated low-voltage rail with digital control circuitry. Keep switching devices and motor current paths away from sensitive analog inputs, confirm that pin-muxed outputs provide the required drive capability, and use transistor or driver circuits rather than driving loads directly.
Recommandé
Compact Communication Interface
The ATTINY1607-MN can serve as the local controller for a compact communication interface because the 20 MHz AVR core supports responsive protocol handling and event-driven peripheral operation. Its 16 KB Flash accommodates protocol routines, configuration data, and a command parser, while the Event System can connect peripheral events without continuous polling. The 24-pin VQFN package permits the interface to be placed beside a transceiver or connector without dominating board area. For serial, SPI, or other communication designs, engineers must map the requested signals to the correct alternate-function pins and account for package-specific multiplexing. Keep the external interface connector and transceiver return paths away from analog inputs, and validate timing with the production clock configuration rather than relying only on nominal maximum frequency.
Recommandé
Precision Analog Acquisition
The ATTINY1607-MN fits compact analog-acquisition products that need local conversion, thresholding, and control without a separate processor. Its 20 MHz execution rate can support deterministic sampling tasks, while the manufacturer's description identifies accurate analog features as part of the device's integrated peripheral set. Sixteen kilobytes of Flash provides space for calibration tables and control code, and 1 KB of SRAM can hold acquisition buffers and filtered results. Placement is critical: route the analog input away from digital return currents, use a quiet ground reference, and place input and supply-decoupling components close to their respective pins. Confirm the selected ADC resolution, acquisition time, reference voltage, and channel availability in the family documentation before fixing the analog front end.
Recommandé
Smart Home and IoT Appliance Control
The ATTINY1607-MN can implement a smart-home or IoT appliance controller when the product needs local logic rather than continuous cloud interaction. The 8-bit AVR core can manage button inputs, indicators, sensors, and actuator state while the Event System and SleepWalking support responsive yet power-conscious behavior. Its 24-pin VQFN 4 x 4 mm footprint is useful in compact panels, while 16 KB Flash and 1 KB SRAM provide a practical balance for embedded control firmware. The 1.8 V to 5.5 V supply range supports low-energy designs and 5 V peripheral environments. Plan the board around a stable local regulator, maintain separation between radio or switching circuitry and analog sensing, and confirm that every external control signal maps to a documented, exposed pin.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour ATTINY1607-MN — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | ATTINY1606-MN | ATTINY1605-MN | ATTINY1614-MN | ATTINY1616-MN | ATTINY1604-MN |
|---|---|---|---|---|---|---|
| Package | 24-pin VQFN (4 x 4 mm) | 24-pin VQFN (4 x 4 mm) | 24-pin VQFN (4 x 4 mm) | 24-pin VQFN (4 x 4 mm) | 24-pin VQFN (4 x 4 mm) | 24-pin VQFN (4 x 4 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
Principaux différenciateurs
- Combines a 20 MHz AVR core with 16 KB Flash and 1 KB SRAM (vs ATTINY1604-MN)
- Supports event-driven and low-power peripheral operation (vs ATTINY1606-MN)
- Provides a practical balance of memory and local analog processing (vs ATTINY1614-MN)
Notes de conception
Use the manufacturer package drawing to establish the exposed-pad connection, courtyard, and solder-mask geometry for the 24-pin VQFN 4 x 4 mm package. Place the decoupling network immediately between the appropriate supply and ground pins, keep the exposed-pad thermal path free of interrupted copper, and follow the land-pattern dimensions for the specific ordering suffix. Do not infer the pad connection or pin numbering from a generic QFN drawing.
Separate analog sensing from switching and communications paths. Route sensitive inputs away from clock, relay-driver, and power-converter traces; provide a continuous ground reference beneath the analog section; and place the MCU ground connection close to the return path of its supply capacitor. If the board contains an ADC-based measurement, compare the routed input impedance and settling behavior with the selected acquisition timing before validating the firmware.
Do not treat same-package family members as automatically interchangeable. Before substituting ATTINY1606-MN, ATTINY1605-MN, ATTINY1604-MN, ATTINY1614-MN, or ATTINY1616-MN, compare Flash and SRAM capacity, clock limits, ADC channels, timer resources, communication peripherals, alternate-function pins, reset behavior, and fuse settings. A PCB footprint match preserves the land pattern, but it does not preserve every software-visible peripheral function.
Choose the operating voltage from the complete system plan and ensure every connected peripheral is tolerant of the selected rail. The ATTINY1607-MN supports 1.8 V to 5.5 V, but the practical minimum should also satisfy clock, analog-reference, reset, and brownout requirements. Use the lowest supply that meets the design's timing and analog specifications, and verify power consumption with the actual peripheral, clock, and sleep configuration rather than assuming the nominal clock rate determines current draw.
Informations de conformité
The ATTINY1607-MN product listing identifies the device as RoHS compliant and green. No separate REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statement is provided.