ATXMEGA16E5-M4U - 32MHz 16KB AVR MCU | Microchip Technology
Référence : ATXMEGA16E5-M4U ✓ ActifATXMEGA16E5-M4U Présentation
An 8/16-bit microcontroller is a compact embedded processor designed to execute control logic, monitor peripherals, and manage communications in industrial, consumer, and communications equipment. The AVR XMEGA architecture combines a Harvard-style memory organization with an event system, hardware peripherals, and interrupt handling designed to reduce external glue logic. Within the product hierarchy, ATXMEGA16E5-M4U is an AVR XMEGA E5 microcontroller, an embedded processor and microcontroller within the broader semiconductor category.
Key features include 16 KB of ISP flash with read-while-write capability, a separate 4 KB boot-code section, and 512 bytes of EEPROM for nonvolatile configuration data. The eight-channel event system can directly route signals between peripherals without continuous CPU intervention, while the programmable multilevel interrupt controller supports deterministic response to external events. Operating from 1.8 V to 3.6 V, the device supports low-voltage, low-power designs while retaining a 32 MHz maximum clock rate.
The XMEGA E5 family uses the AVR enhanced RISC architecture and provides an integrated peripheral set for embedded control. Three 16-bit timers and a real-time counter support periodic, capture, compare, and timing functions. SPI, I2C, USART, and IrDA connectivity enables the controller to communicate with sensors, transceivers, memories, and host processors. Read-while-write flash operation can also improve firmware-update strategies when application code is designed around that capability.
Typical applications include industrial sensor nodes, compact motor controllers, building and access-control modules, data-acquisition equipment, communications equipment, and low-power embedded control boards. Its small 4 x 4 mm package and 26 I/O lines suit space-constrained designs that require more local processing than a simple peripheral or logic controller. The combination of event routing, hardware timers, and multiple serial interfaces allows several tasks to be consolidated into one device.
PCB design should preserve the exposed-pad thermal and electrical requirements of the UQFN package. Place the device's decoupling capacitor close to its supply pins, route sensitive communications away from switching nodes, and use the pin-description table in the manufacturer datasheet when assigning the 32 package connections. Firmware and peripheral configuration should be validated against the ATxmega E5 family data sheet, including clock, memory, interrupt, and low-power behavior.
This page combines the manufacturer's device specifications with package details, application guidance, structured comparisons, and same-family drop-in alternatives. It is designed to help engineers evaluate the ATXMEGA16E5-M4U for compact embedded-control platforms while separating electrically similar options from devices with materially different flash capacities.
Alternatives de remplacement direct pour ATXMEGA16E5-M4U — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec ATXMEGA16E5-M4U (même facteur de forme et même empreinte) — différant par Package, Boot Code Section, Product Type, Program Memory Organization, Serial Interfaces.
ATXMEGA16E5-M4UR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ATXMEGA8E5-M4U
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →ATXMEGA32E5-M4U
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ATXMEGA16E5-M4U Valeurs maximales et caractéristiques électriques
| Product Type | 8/16-bit AVR XMEGA E5 microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 16 KB |
| Boot Section | 4 KB |
| SRAM | 2 KB |
| EEPROM | 512 bytes |
| General-Purpose I/O | 26 lines |
| Event System | 8 channels |
| Timer Counters | 3 x 16-bit |
| Real-Time Counter | 1 x 16-bit |
| Operating Voltage | 1.8 V to 3.6 V |
| Serial Interfaces | SPI, I2C, UART/USART, and IrDA |
| Boîtier | 32-UQFN (4 x 4 mm) |
| Type de montage | Surface mount |
| Core Architecture | AVR enhanced RISC |
| Flash Programming | In-system programming with read-while-write |
| Statut RoHS | Compliant |
Guide de configuration des broches du ATXMEGA16E5-M4U 32-uqfn (4 x 4 mm)
Configuration des broches du ATXMEGA16E5-M4U (boîtier 32-uqfn (4 x 4 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour ATXMEGA16E5-M4U.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
ATXMEGA16E5-M4U convient pour 6 applications: Industrial Sensor Nodes, Compact Motor Control, Building and Access Control, Data Acquisition Equipment, Communications Equipment, Battery-Powered Embedded Products.
Industrial Sensor Nodes
The ATXMEGA16E5-M4U fits compact sensor nodes that combine measurement, local control, and network communication in one 32-UQFN device. Its 32 MHz AVR processor and 16 KB of flash provide room for sampling logic, filtering, configuration, and communications firmware, while 2 KB of SRAM supports working buffers. The eight-channel event system can link timers, sensor signals, and communication events without routing every operation through the main CPU. SPI and I2C suit short-range sensor buses, while UART/USART and IrDA support a host or wireless module. The 1.8 V to 3.6 V operating range also allows integration into low-voltage industrial sensor platforms.
Recommandé
Compact Motor Control
The ATXMEGA16E5-M4U is appropriate for small motor-control modules where timing accuracy, local I/O, and serial adjustment are important. Its three 16-bit timers and one 16-bit real-time counter support PWM generation, input capture, and periodic control tasks, while 26 GPIO lines can connect sensors, switches, and status indicators. The event system can coordinate timer events with communications and reduce interrupt overhead. At 32 MHz, the controller can execute control and protection logic alongside a communication protocol. A 32-UQFN 4 x 4 mm package also allows the controller to fit beside a compact power stage in space-constrained fan, actuator, or positioning modules.
Recommandé
Building and Access Control
The ATXMEGA16E5-M4U can consolidate logic for access-control readers, lock interfaces, keypads, and alarm inputs in a compact module. Its 26 GPIO lines provide practical capacity for buttons, indicators, door sensors, and relay-control signals, while the programmable multilevel interrupt controller supports prioritized handling of access and tamper events. SPI or I2C can connect to secure authentication devices or external memory, and UART provides a straightforward interface to a host controller. The 16 KB flash accommodates firmware updates, configuration handling, and communication protocols, while the 1.8 V to 3.6 V range supports low-voltage door hardware.
Recommandé
Data Acquisition Equipment
The ATXMEGA16E5-M4U suits compact data-acquisition and measurement modules requiring precise timers, local buffering, and flexible communications. Its three 16-bit timers and 16-bit real-time counter support accurate sampling windows, input capture, and periodic sensor triggering. The event system can route timer, communication, and external events efficiently, reducing the processing burden during acquisition sequences. With 16 KB of flash, 2 KB of SRAM, and 512 bytes of EEPROM, it can hold control firmware, calibration data, and short working buffers. SPI is suitable for high-rate converters or digital sensors, while UART and I2C provide lower-rate connectivity to measurement peripherals and a host.
Recommandé
Communications Equipment
The ATXMEGA16E5-M4U is a useful control hub for compact communications equipment that needs multiple serial interfaces and deterministic event handling. Its SPI, I2C, UART/USART, and IrDA capabilities can connect radio or network modules, memory, sensors, and service interfaces without requiring several separate controllers. The eight-channel event system improves responsiveness by linking peripheral events directly, while the programmable multilevel interrupt controller helps separate communication servicing from time-critical control tasks. The 32 MHz core and 16 KB flash provide sufficient performance for protocol handling and local configuration, and the compact 4 x 4 mm UQFN package supports space-constrained gateways and control heads.
Recommandé
Battery-Powered Embedded Products
The ATXMEGA16E5-M4U can serve as the central controller in small battery-powered products that require several peripherals but limited board area. Its low-power XMEGA E5 architecture, 1.8 V to 3.6 V supply range, and configurable peripherals allow the design to minimize active processing while using timers or the event system for scheduled tasks. Sixteen kilobytes of flash provides a practical balance between local intelligence and memory demand, while the event system can wake or coordinate peripherals efficiently. The 32-UQFN package reduces PCB footprint, making the device useful for portable instrumentation, personal equipment, and compact industrial monitors where standby behavior and deterministic wake-up handling are important.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour ATXMEGA16E5-M4U — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | ATXMEGA16E5-M4UR | ATXMEGA8E5-M4U | ATXMEGA32E5-M4U |
|---|---|---|---|---|
| Package | 32-UQFN (4 x 4 mm) | 32-UQFN (4 x 4 mm) | 32-UQFN (4 x 4 mm) | 32-UQFN (4 x 4 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 16 KB | 16 KB | 8 KB | 32 KB |
| SRAM | 2 KB | 2 KB | 1 KB | 4 KB |
| EEPROM | 512 bytes | 512 bytes | 512 bytes | 1 KB |
| Operating Voltage | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| General-Purpose I/O | 26 lines | 26 lines | 26 lines | 26 lines |
| Boot Section | 4 KB | 4 KB | 4 KB | 4 KB |
| Core Architecture | AVR enhanced RISC | AVR enhanced RISC | AVR enhanced RISC | AVR enhanced RISC |
Principaux différenciateurs
- Provides twice the flash of ATXMEGA8E5-M4U while retaining the same 32 MHz speed and 32-UQFN footprint (vs ATXMEGA8E5-M4U)
- Uses half the flash and SRAM of ATXMEGA32E5-M4U for designs that do not require the larger memory budget (vs ATXMEGA32E5-M4U)
- Matches the exact electrical configuration of ATXMEGA16E5-M4UR (vs ATXMEGA16E5-M4UR)
Notes de conception
Follow the Microchip Technology UQFN land pattern and exposed-pad recommendations in datasheet DS40002059A. Keep the MCU supply bypass capacitor adjacent to the appropriate power and ground pins, minimize loop area, and provide uninterrupted ground beneath the exposed pad. The 4 x 4 mm package has limited routing escape area, so finalize pin assignment before placing signal and decoupling components.
Design the 1.8 V to 3.6 V supply and local decoupling around the ATxmega16E5 family's electrical limits. Account for startup, sleep-mode transitions, and current changes caused by peripherals such as the SPI, I2C, UART, timers, and event system. Use the datasheet's recommended capacitor values and ESR characteristics rather than substituting bulk capacitance for the required high-frequency bypass.
Separate analog and communication-sensitive routes from digital switching paths, clock circuitry, and fast edge-rate signals. The ATxmega16E5 supports analog and communication peripherals, so resistor networks or RC filtering should be positioned close to the relevant pins. Preserve short ground returns, avoid routing beneath noisy power-conversion stages, and maintain consistent return paths for SPI, I2C, UART/USART, and IrDA connections.
Do not treat ATXMEGA8E5-M4U or ATXMEGA32E5-M4U as unconditional firmware-identical replacements for ATXMEGA16E5-M4U. Their physical footprint and 32 MHz architecture match, but their flash, SRAM, and EEPROM capacities differ. Review linker limits, boot-loader addresses, calibration storage, interrupt-vector assumptions, and any code that depends on exact memory sizes before selecting a lower- or higher-memory member.
Informations de conformité
RoHS compliance is listed in product and catalog information. Other environmental and material declarations are not identified in the referenced device information.