ATXMEGA16E5-M4U - 32MHz 16KB AVR MCU | Microchip Technology
MPN: ATXMEGA16E5-M4U ✓ 啟用中ATXMEGA16E5-M4U 概覽
An 8/16-bit microcontroller is a compact embedded processor designed to execute control logic, monitor peripherals, and manage communications in industrial, consumer, and communications equipment. The AVR XMEGA architecture combines a Harvard-style memory organization with an event system, hardware peripherals, and interrupt handling designed to reduce external glue logic. Within the product hierarchy, ATXMEGA16E5-M4U is an AVR XMEGA E5 microcontroller, an embedded processor and microcontroller within the broader semiconductor category.
Key features include 16 KB of ISP flash with read-while-write capability, a separate 4 KB boot-code section, and 512 bytes of EEPROM for nonvolatile configuration data. The eight-channel event system can directly route signals between peripherals without continuous CPU intervention, while the programmable multilevel interrupt controller supports deterministic response to external events. Operating from 1.8 V to 3.6 V, the device supports low-voltage, low-power designs while retaining a 32 MHz maximum clock rate.
The XMEGA E5 family uses the AVR enhanced RISC architecture and provides an integrated peripheral set for embedded control. Three 16-bit timers and a real-time counter support periodic, capture, compare, and timing functions. SPI, I2C, USART, and IrDA connectivity enables the controller to communicate with sensors, transceivers, memories, and host processors. Read-while-write flash operation can also improve firmware-update strategies when application code is designed around that capability.
Typical applications include industrial sensor nodes, compact motor controllers, building and access-control modules, data-acquisition equipment, communications equipment, and low-power embedded control boards. Its small 4 x 4 mm package and 26 I/O lines suit space-constrained designs that require more local processing than a simple peripheral or logic controller. The combination of event routing, hardware timers, and multiple serial interfaces allows several tasks to be consolidated into one device.
PCB design should preserve the exposed-pad thermal and electrical requirements of the UQFN package. Place the device's decoupling capacitor close to its supply pins, route sensitive communications away from switching nodes, and use the pin-description table in the manufacturer datasheet when assigning the 32 package connections. Firmware and peripheral configuration should be validated against the ATxmega E5 family data sheet, including clock, memory, interrupt, and low-power behavior.
This page combines the manufacturer's device specifications with package details, application guidance, structured comparisons, and same-family drop-in alternatives. It is designed to help engineers evaluate the ATXMEGA16E5-M4U for compact embedded-control platforms while separating electrically similar options from devices with materially different flash capacities.
直接替換替代品,適用於 ATXMEGA16E5-M4U — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ATXMEGA16E5-M4U (相同外形與佔位) — 差異在於 Package, Boot Code Section, Product Type, Program Memory Organization, Serial Interfaces.
ATXMEGA16E5-M4UR
✅ 直接替換📋 參考替代品(不在目錄中)
ATXMEGA8E5-M4U
✅ 直接替換聯絡詢價
查看資料表 →ATXMEGA32E5-M4U
✅ 直接替換📋 參考替代品(不在目錄中)
ATXMEGA16E5-M4U 最大額定值與電氣特性
| Product Type | 8/16-bit AVR XMEGA E5 microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 16 KB |
| Boot Section | 4 KB |
| SRAM | 2 KB |
| EEPROM | 512 bytes |
| General-Purpose I/O | 26 lines |
| Event System | 8 channels |
| Timer Counters | 3 x 16-bit |
| Real-Time Counter | 1 x 16-bit |
| Operating Voltage | 1.8 V to 3.6 V |
| Serial Interfaces | SPI, I2C, UART/USART, and IrDA |
| 封裝 | 32-UQFN (4 x 4 mm) |
| 安裝類型 | Surface mount |
| Core Architecture | AVR enhanced RISC |
| Flash Programming | In-system programming with read-while-write |
| RoHS 狀態 | Compliant |
ATXMEGA16E5-M4U 32-uqfn (4 x 4 mm) 腳位配置指南
ATXMEGA16E5-M4U(32-uqfn (4 x 4 mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: ATXMEGA16E5-M4U.
請參閱 資料表 以查看完整腳位配置。
典型應用
ATXMEGA16E5-M4U 適用於 6 應用s: Industrial Sensor Nodes, Compact Motor Control, Building and Access Control, Data Acquisition Equipment, Communications Equipment, Battery-Powered Embedded Products.
Industrial Sensor Nodes
The ATXMEGA16E5-M4U fits compact sensor nodes that combine measurement, local control, and network communication in one 32-UQFN device. Its 32 MHz AVR processor and 16 KB of flash provide room for sampling logic, filtering, configuration, and communications firmware, while 2 KB of SRAM supports working buffers. The eight-channel event system can link timers, sensor signals, and communication events without routing every operation through the main CPU. SPI and I2C suit short-range sensor buses, while UART/USART and IrDA support a host or wireless module. The 1.8 V to 3.6 V operating range also allows integration into low-voltage industrial sensor platforms.
推薦
Compact Motor Control
The ATXMEGA16E5-M4U is appropriate for small motor-control modules where timing accuracy, local I/O, and serial adjustment are important. Its three 16-bit timers and one 16-bit real-time counter support PWM generation, input capture, and periodic control tasks, while 26 GPIO lines can connect sensors, switches, and status indicators. The event system can coordinate timer events with communications and reduce interrupt overhead. At 32 MHz, the controller can execute control and protection logic alongside a communication protocol. A 32-UQFN 4 x 4 mm package also allows the controller to fit beside a compact power stage in space-constrained fan, actuator, or positioning modules.
推薦
Building and Access Control
The ATXMEGA16E5-M4U can consolidate logic for access-control readers, lock interfaces, keypads, and alarm inputs in a compact module. Its 26 GPIO lines provide practical capacity for buttons, indicators, door sensors, and relay-control signals, while the programmable multilevel interrupt controller supports prioritized handling of access and tamper events. SPI or I2C can connect to secure authentication devices or external memory, and UART provides a straightforward interface to a host controller. The 16 KB flash accommodates firmware updates, configuration handling, and communication protocols, while the 1.8 V to 3.6 V range supports low-voltage door hardware.
推薦
Data Acquisition Equipment
The ATXMEGA16E5-M4U suits compact data-acquisition and measurement modules requiring precise timers, local buffering, and flexible communications. Its three 16-bit timers and 16-bit real-time counter support accurate sampling windows, input capture, and periodic sensor triggering. The event system can route timer, communication, and external events efficiently, reducing the processing burden during acquisition sequences. With 16 KB of flash, 2 KB of SRAM, and 512 bytes of EEPROM, it can hold control firmware, calibration data, and short working buffers. SPI is suitable for high-rate converters or digital sensors, while UART and I2C provide lower-rate connectivity to measurement peripherals and a host.
推薦
Communications Equipment
The ATXMEGA16E5-M4U is a useful control hub for compact communications equipment that needs multiple serial interfaces and deterministic event handling. Its SPI, I2C, UART/USART, and IrDA capabilities can connect radio or network modules, memory, sensors, and service interfaces without requiring several separate controllers. The eight-channel event system improves responsiveness by linking peripheral events directly, while the programmable multilevel interrupt controller helps separate communication servicing from time-critical control tasks. The 32 MHz core and 16 KB flash provide sufficient performance for protocol handling and local configuration, and the compact 4 x 4 mm UQFN package supports space-constrained gateways and control heads.
推薦
Battery-Powered Embedded Products
The ATXMEGA16E5-M4U can serve as the central controller in small battery-powered products that require several peripherals but limited board area. Its low-power XMEGA E5 architecture, 1.8 V to 3.6 V supply range, and configurable peripherals allow the design to minimize active processing while using timers or the event system for scheduled tasks. Sixteen kilobytes of flash provides a practical balance between local intelligence and memory demand, while the event system can wake or coordinate peripherals efficiently. The 32-UQFN package reduces PCB footprint, making the device useful for portable instrumentation, personal equipment, and compact industrial monitors where standby behavior and deterministic wake-up handling are important.
推薦
推薦產品摘要
工程參考資料,適用於 ATXMEGA16E5-M4U — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ATXMEGA16E5-M4UR | ATXMEGA8E5-M4U | ATXMEGA32E5-M4U |
|---|---|---|---|---|
| Package | 32-UQFN (4 x 4 mm) | 32-UQFN (4 x 4 mm) | 32-UQFN (4 x 4 mm) | 32-UQFN (4 x 4 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 16 KB | 16 KB | 8 KB | 32 KB |
| SRAM | 2 KB | 2 KB | 1 KB | 4 KB |
| EEPROM | 512 bytes | 512 bytes | 512 bytes | 1 KB |
| Operating Voltage | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| General-Purpose I/O | 26 lines | 26 lines | 26 lines | 26 lines |
| Boot Section | 4 KB | 4 KB | 4 KB | 4 KB |
| Core Architecture | AVR enhanced RISC | AVR enhanced RISC | AVR enhanced RISC | AVR enhanced RISC |
主要差異化特點
- Provides twice the flash of ATXMEGA8E5-M4U while retaining the same 32 MHz speed and 32-UQFN footprint (對比ATXMEGA8E5-M4U)
- Uses half the flash and SRAM of ATXMEGA32E5-M4U for designs that do not require the larger memory budget (對比ATXMEGA32E5-M4U)
- Matches the exact electrical configuration of ATXMEGA16E5-M4UR (對比ATXMEGA16E5-M4UR)
設計說明
Follow the Microchip Technology UQFN land pattern and exposed-pad recommendations in datasheet DS40002059A. Keep the MCU supply bypass capacitor adjacent to the appropriate power and ground pins, minimize loop area, and provide uninterrupted ground beneath the exposed pad. The 4 x 4 mm package has limited routing escape area, so finalize pin assignment before placing signal and decoupling components.
Design the 1.8 V to 3.6 V supply and local decoupling around the ATxmega16E5 family's electrical limits. Account for startup, sleep-mode transitions, and current changes caused by peripherals such as the SPI, I2C, UART, timers, and event system. Use the datasheet's recommended capacitor values and ESR characteristics rather than substituting bulk capacitance for the required high-frequency bypass.
Separate analog and communication-sensitive routes from digital switching paths, clock circuitry, and fast edge-rate signals. The ATxmega16E5 supports analog and communication peripherals, so resistor networks or RC filtering should be positioned close to the relevant pins. Preserve short ground returns, avoid routing beneath noisy power-conversion stages, and maintain consistent return paths for SPI, I2C, UART/USART, and IrDA connections.
Do not treat ATXMEGA8E5-M4U or ATXMEGA32E5-M4U as unconditional firmware-identical replacements for ATXMEGA16E5-M4U. Their physical footprint and 32 MHz architecture match, but their flash, SRAM, and EEPROM capacities differ. Review linker limits, boot-loader addresses, calibration storage, interrupt-vector assumptions, and any code that depends on exact memory sizes before selecting a lower- or higher-memory member.
合規資訊
RoHS compliance is listed in product and catalog information. Other environmental and material declarations are not identified in the referenced device information.