BCM5482A2KFBG - Dual-Port Gigabit Ethernet PHY | Broadcom
Référence : BCM5482A2KFBG ✓ ActifBCM5482A2KFBG Présentation
An Ethernet physical-layer transceiver, commonly called an Ethernet PHY, converts digital data into signals suitable for copper-cable transmission while managing line signaling, link negotiation, and recovery. Within the network-interface hierarchy, the BCM5482A2KFBG sits below the Ethernet MAC and above the transformer and magnetics. Integrating two PHY channels into one package reduces board area in designs that need two copper-network connections.
The principal benefits of this device are its dual-port architecture, support for three Ethernet speed classes, and 121-BGA package. Each port can operate at 10 Mb/s, 100 Mb/s, or 1 Gb/s, allowing a single board design to support legacy and gigabit links. The full-duplex capability is suited to simultaneous bidirectional traffic, while half-duplex support provides compatibility with legacy network equipment.
Technically, the BCM5482A2KFBG is a CMOS Ethernet transceiver rather than a general-purpose processor. Its two PHY channels provide the physical-layer interface between a digital network controller and external magnetic interface circuitry. Exact pin assignments, clock requirements, register definitions, power rails, media-unit interfaces, and electrical characteristics should be taken from the Broadcom manufacturer datasheet for the assembled board.
Typical uses include dual-port routers, network switches, industrial Ethernet gateways, set-top equipment, embedded Linux systems, and network-interface cards. In each application, the PHY can support two copper links independently, reducing the number of separate Ethernet transceiver packages required on the PCB.
The principal design consideration is PCB implementation. A 121-BGA device requires fine-pitch routing, controlled escape geometry, and careful power and ground distribution. Follow the manufacturer layout, decoupling, thermal, and magnetics guidance rather than inferring high-speed routing requirements from generic BGA rules.
This page consolidates the verified product identity, package information, speed-class coverage, sourcing data, replacement considerations, and engineering guidance into one design reference. It also distinguishes true footprint-compatible Broadcom alternatives from functional Ethernet PHY options that require different packages, interfaces, or board layouts.
Alternatives de remplacement direct pour BCM5482A2KFBG — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec BCM5482A2KFBG (même facteur de forme et même empreinte) — différant par Package, Product Type.
BCM5482HA2KFBG
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
BCM5482SEA2KFBG
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
BCM5482SHEA2IFBG
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
BCM54220SB0IFBG
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
BCM54640B0IFBG
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
BCM5482A2KFBG Valeurs maximales et caractéristiques électriques
| Product Type | Dual-port Ethernet transceiver |
| Supported Ethernet Speeds | 10 Mb/s, 100 Mb/s, 1 Gb/s |
| Port Count | 2 ports |
| Duplex Operation | Full duplex and half duplex |
| Physical Layer Standard | 10/100/1000BASE-T |
| Process Technology | CMOS |
| Boîtier | 121-BGA |
| Nombre de broches | 121 balls |
| Type de montage | Surface mount |
| Interface Category | Ethernet PHY |
| Maximum Data Rate | 1 Gb/s per port |
| Minimum Data Rate | 10 Mb/s per port |
| Statut RoHS | unknown |
| REACH Status | unknown |
Guide de configuration des broches du BCM5482A2KFBG 121-bga
Configuration des broches du BCM5482A2KFBG (boîtier 121-bga). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour BCM5482A2KFBG.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
BCM5482A2KFBG convient pour 6 applications: Dual-Port Network Router, Industrial Ethernet Gateway, Network Switch Line Card, Set-Top Box and Media Gateway, Embedded Linux Network Interface, Network Interface Card.
Dual-Port Network Router
The BCM5482A2KFBG fits routers requiring two copper Ethernet connections in one device. Each PHY channel supports 10 Mb/s, 100 Mb/s, and 1 Gb/s, allowing the same hardware to address legacy 10/100BASE-T equipment as well as Gigabit Ethernet clients. Placing two PHYs under one network controller can reduce PCB area and simplify power sequencing. The implementation should provide independent magnetics, isolation, and controlled-impedance routing for both ports, while confirming that all required management, clock, and status signals are available on the chosen Broadcom variant.
Recommandé
Industrial Ethernet Gateway
The BCM5482A2KFBG is suitable for gateways that must bridge local copper networks to an embedded controller or upstream processor. Its two ports support 10BASE-T, 100BASE-T, and 1000BASE-T, making it useful where field equipment may connect through older or newer Ethernet infrastructure. A dual-channel implementation avoids two separate PHY packages, but the board must provide appropriate surge protection, isolation, grounding, and magnetics. Confirm the device temperature grade and electrical limits against the gateway’s environmental requirements before production release.
Recommandé
Network Switch Line Card
The BCM5482A2KFBG can supply two 10/100/1000BASE-T physical-layer channels for a switch line card or compact access switch. Supporting all three Ethernet speed classes on each port helps the card interoperate with mixed legacy and Gigabit deployments. Its 121-BGA package supports dense integration but requires careful escape routing between fine-pitch balls and the magnetics or RJ45 area. Validate fanout, layer transitions, return paths, and impedance control using the manufacturer land pattern and high-speed layout guidance.
Recommandé
Set-Top Box and Media Gateway
The BCM5482A2KFBG fits media systems that need one or more Ethernet links alongside video, storage, or control functions. The device’s dual-port capability can support connectivity to a home network and local service equipment without requiring separate PHY packages. Because link speeds can be negotiated across 10 Mb/s, 100 Mb/s, and 1 Gb/s, the implementation can support legacy switches and high-speed transfers. Keep the PHY, magnetics, and connector return paths physically separated from noisy switching regulators and high-current digital circuitry.
Recommandé
Embedded Linux Network Interface
The BCM5482A2KFBG can provide hardware network connectivity for an embedded Linux system through an external MAC or a companion network controller. Supporting three speed classes broadens compatibility with development networks, peripherals, and service equipment. Two PHY channels can separate management traffic from application traffic or provide a fallback path for link diagnostics. Firmware must support the PHY interface and status behavior of the exact BCM5482 variant, while the PCB must preserve clean media-unit signaling and isolated network-domain boundaries.
Recommandé
Network Interface Card
The BCM5482A2KFBG is applicable to dual-port network interface cards intended to add copper Ethernet connectivity to a computer or embedded chassis. Each channel can operate from 10BASE-T through 1000BASE-T, supporting legacy infrastructure while retaining gigabit throughput. Two integrated PHY channels can simplify connector and magnetics placement relative to two discrete transceiver packages. A production design should verify host-interface requirements, reference clocks, MDIO management paths, LED behavior, and the exact Broadcom ordering code before finalizing the schematic.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour BCM5482A2KFBG — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | BCM5482HA2KFBG | BCM5482SEA2KFBG | BCM5482SHEA2IFBG | BCM54220SB0IFBG | BCM54640B0IFBG |
|---|---|---|---|---|---|---|
| Package | 121-BGA | 121-BGA | 121-BGA | 121-BGA | 121-BGA | 121-BGA |
| Brand | Broadcom | Broadcom | Broadcom | Broadcom | Broadcom | Broadcom |
| Product Type | Dual-port Ethernet transceiver | Dual-port Ethernet transceiver | Ethernet transceiver | Ethernet PHY | Ethernet transceiver | Ethernet transceiver |
| Supported Data Rates | 10 Mb/s, 100 Mb/s, 1 Gb/s | 10 Mb/s, 100 Mb/s, 1 Gb/s | 10 Mb/s, 100 Mb/s, 1 Gb/s | 10 Mb/s, 100 Mb/s, 1 Gb/s | 10 Mb/s, 100 Mb/s, 1 Gb/s | 10 Mb/s, 100 Mb/s, 1 Gb/s |
| Maximum Data Rate | 1 Gb/s per port | 1 Gb/s per port | 1 Gb/s per port | 1 Gb/s per port | 1 Gb/s per port | 1 Gb/s per port |
Principaux différenciateurs
- Two independently addressed Gigabit Ethernet PHY channels (vs BCM5482HA2KFBG)
- Broad support for mixed-speed copper Ethernet (vs BCM54640B0IFBG)
- Single-package integration for two copper network links (vs TLK105L)
- Full-duplex and half-duplex operation (vs KSZ9031)
Notes de conception
Treat the 121-BGA escape routing as the dominant layout constraint. Follow the Broadcom land pattern for ball locations, solder-mask design, and pad geometry, and preserve the recommended ball-to-ball and ball-to-component clearances. Fan out each media-unit, management, clock, power, and ground connection according to the manufacturer stack-up guidance before placing the connector or magnetics. Do not derive a footprint from generic BGA rules.
Separate each Ethernet channel’s signal path from the other channel and from high-current switching circuitry. Maintain continuous return paths beneath high-speed traces, use the manufacturer’s recommended reference-plane transitions, and control impedance on the media interface. Keep the PHY-to-magnetics and magnetics-to-connector sections short where the application circuit specifies it, while accounting for component and connector placement tolerance rather than relying only on nominal trace length.
Use the manufacturer’s recommended power rails, decoupling network, and startup sequencing without substituting equivalent-looking capacitors. Place required input and output capacitors adjacent to their associated balls with short ground vias, and verify that the power-supply network does not disturb link training or media-unit operation. Decoupling capacitance, voltage tolerance, ESR, and placement requirements should be selected from the Broadcom manufacturer datasheet rather than assumed from general practice.
A matching Ethernet speed rating does not prove that an alternative ordering code is interchangeable. Before substituting any BCM5482-family candidate, compare every BGA ball, power domain, reference-clock requirement, reset behavior, management address, register default, strap configuration, and media-unit connection. Also confirm the exact Broadcom ordering code and qualification status; otherwise, treat the candidate as a redesign rather than a drop-in replacement.
Informations de conformité
RoHS and REACH status require confirmation for the exact Broadcom ordering code. The BCM5482A2KFBG is an Ethernet interface IC rather than an automotive-qualified device, so AEC-Q100 status is not applicable.