C8051F413-GM - 50MHz 8-Bit Mixed-Signal MCU | Silicon Labs
Référence : C8051F413-GM ✓ ActifC8051F413-GM Présentation
A mixed-signal microcontroller is an integrated circuit that combines a digital processor core with analog conversion, comparison, and timing functions. The C8051F41x family belongs to the broader hierarchy of 8-bit MCU, CISC microcontroller, embedded controller, and semiconductor categories. Integrating the DAC, comparators, timers, Flash, and RAM on one device reduces the number of separate components required for embedded control and reduces the complexity of signal routing between analog and digital sections.
The C8051F413 provides 16 KB of Flash for program storage, 2.25 KB of RAM for working data, and a 50 MHz clock. It also integrates a two-channel 12-bit DAC, two analog comparators, four 16-bit timers, an on-chip power-on reset, and a VDD monitor. These resources support digital control, waveform generation, threshold detection, periodic event generation, and compact analog signal conditioning without requiring a separate DAC or comparator package.
The 8051-compatible processor architecture provides a familiar instruction set and deterministic embedded-control behavior, while the mixed-signal peripherals reduce external component count. The 5 x 5 mm QFN-28 package supports compact layouts, but its exposed-pad construction requires careful thermal and layout design. Firmware, peripheral assignments, pin multiplexing, clocking, and power sequencing must be checked against the manufacturer datasheet before the device is used in a new PCB revision.
Typical applications include compact industrial controllers, sensor-conditioning systems, programmable analog output equipment, communications modules, and low-cost embedded instruments. The two DAC channels can generate controlled reference or control voltages, while the comparators can perform fast threshold decisions involving external analog signals. The four 16-bit timers are useful for periodic sampling, pulse-width measurement, and motor or timing-control functions.
For PCB implementation, reserve clean grounding beneath the exposed pad, connect the required decoupling capacitors close to their supply pins, and route analog inputs away from fast digital switching nodes. Confirm the device's startup behavior, oscillator options, analog-reference requirements, and programming procedure in the manufacturer documentation before finalizing firmware and the exposed-pad thermal design.
This product page consolidates the manufacturer specifications, package characteristics, sourcing information, and engineering-focused comparison guidance for the C8051F413-GM. It also distinguishes true package-compatible family options from parts that require broader hardware or firmware validation, helping engineers narrow replacement candidates before starting a board redesign.
Alternatives de remplacement direct pour C8051F413-GM — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec C8051F413-GM (même facteur de forme et même empreinte) — différant par Package, Power-On Reset, Product Type.
C8051F411-GM
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →C8051F321-GM
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
C8051F369-GM
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →C8051F412-GM
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
C8051F414-GM
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
C8051F413-GM Valeurs maximales et caractéristiques électriques
| Product Type | 8-bit mixed-signal microcontroller |
| Processor Core | 8051-compatible core |
| Fréquence d'horloge maximale | 50 MHz |
| Flash Memory | 16 KB (16K x 8) |
| RAM | 2.25 KB |
| Supply Voltage Range | 2 V to 5.25 V |
| DAC | 2 channels, 12-bit resolution |
| Comparators | 2 |
| Timers | 4 x 16-bit timers |
| Boîtier | 28-pin QFN, 5 x 5 mm |
| Type de montage | Surface mount |
| Power-On Reset | On chip |
| VDD Monitor | On chip |
| Communication Interfaces | Additional communication interfaces |
| Statut RoHS | RoHS listed by LCSC |
Guide de configuration des broches du C8051F413-GM 28-pin qfn, 5 x 5 mm
Configuration des broches du C8051F413-GM (boîtier 28-pin qfn, 5 x 5 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour C8051F413-GM.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
C8051F413-GM convient pour 6 applications: Industrial Sensor Conditioning, Programmable Analog Output Control, Communications Interface Module, Compact Measurement Instrument, Timing and Pulse Control, Portable Embedded Controller.
Industrial Sensor Conditioning
The C8051F413-GM fits compact industrial sensor-conditioning modules that require local comparison, periodic sampling, and controlled outputs. Its two comparators can evaluate external signals against configurable thresholds, while the four 16-bit timers support acquisition timing, pulse measurement, and periodic control tasks. The 50 MHz 8051-compatible core can combine peripheral management with communication handling, and the 16 KB Flash provides dedicated space for control firmware. A 2 V to 5.25 V supply range supports both low-voltage sensor nodes and 3.3 V industrial electronics. The principal constraint is the 2.25 KB RAM, so acquisition buffers and communication queues should be sized before final firmware allocation.
Recommandé
Programmable Analog Output Control
The C8051F413-GM is suited to equipment that requires two independently programmable analog outputs alongside embedded digital control. Its two-channel 12-bit DAC can generate reference levels, excitation voltages, or test signals, while the 50 MHz processor manages set-point logic and output updates. The two comparators can monitor whether an external signal has reached a desired threshold, creating a closed-loop sequence without requiring a separate analog IC. With 16 KB Flash and 2.25 KB RAM, the device is best suited to compact control tasks rather than complex waveform storage. Board design should preserve analog grounding and follow the manufacturer’s DAC, reference, and decoupling recommendations.
Recommandé
Communications Interface Module
The C8051F413-GM can serve as the local controller in compact communications equipment that needs deterministic timers and mixed-signal functions. The 50 MHz 8051-compatible core provides sufficient instruction throughput for protocol handling, while four 16-bit timers can support baud-rate generation, receive timeouts, and periodic status reporting. The on-chip VDD monitor assists with supply-condition supervision, and the two comparators can support line-level or threshold-based interface functions. The 16 KB Flash and 2.25 KB RAM favor lightweight protocols and bounded message buffers. Designers should verify the available communication peripherals, oscillator requirements, and pin assignments in the manufacturer documentation before selecting the final serial interface configuration.
Recommandé
Compact Measurement Instrument
The C8051F413-GM fits compact measurement instruments that combine digital computation with programmable analog outputs and threshold detection. Its two-channel 12-bit DAC supports calibration or stimulus generation, while the comparators can perform fast limit checks on external signals. Four 16-bit timers allow accurate interval measurement and periodic sampling, and the 50 MHz processor can execute control and display-adjacent calculations. The device operates from 2 V to 5.25 V, allowing integration into portable and bench-oriented designs. Memory planning is essential because the 2.25 KB RAM is modest for large sample buffers, while the 16 KB Flash must accommodate measurement routines, calibration data, and any in-field update logic.
Recommandé
Timing and Pulse Control
The C8051F413-GM is appropriate for embedded timing controllers where multiple periodic events and pulse measurements must be managed locally. Its four 16-bit timers provide dedicated resources for waveform generation, input timing, output compare, and event counting, while the 50 MHz core handles sequencing and supervisory logic. The two comparators can qualify asynchronous threshold events before they are passed to the processor, reducing the need for continuous software polling. The compact QFN-28 package permits integration into dense control assemblies, although its exposed pad requires proper thermal-via layout. Firmware should be validated for timer-clock derivation, interrupt priority, and behavior during power transitions.
Recommandé
Portable Embedded Controller
The C8051F413-GM is suitable for portable embedded-control products that need a low-power operating range, local analog functions, and a compact footprint. Its 2 V to 5.25 V supply capability supports battery-derived systems operating at reduced voltage as well as conventional 3.3 V rails. The integrated DAC, comparators, VDD monitor, and power-on reset reduce the number of supporting components, while the 28-pin 5 x 5 mm QFN leaves board area for sensors or a communication interface. The 16 KB Flash and 2.25 KB RAM limit the product to compact applications, so firmware updates and data buffers require disciplined allocation. Use the manufacturer low-power and power-on behavior information to set the appropriate operating modes.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour C8051F413-GM — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | C8051F411-GM | C8051F321-GM | C8051F369-GM | C8051F412-GM | C8051F414-GM |
|---|---|---|---|---|---|---|
| Package | QFN-28 (5x5) | QFN-28 (5x5) | 28-pin QFN family package | 28-pin QFN family package | QFN-28 (5x5) | QFN-28 (5x5) |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Core | 8-bit 8051-compatible core | 8-bit 8051-compatible core | 8-bit MCU | 8-bit MCU | 8-bit 8051-compatible core | 8-bit 8051-compatible core |
Principaux différenciateurs
- Integrated two-channel 12-bit DAC within an 8-bit mixed-signal MCU (vs C8051F369-GM)
- Compact analog and digital integration (vs C8051F321-GM)
- Balanced 16 KB Flash configuration with extensive mixed-signal resources (vs C8051F411-GM)
- Wide stated supply-voltage range (vs C8051F411-GM)
Notes de conception
Treat the exposed thermal pad as both a thermal path and a package-specific electrical connection defined by the manufacturer layout. Place the required input and decoupling capacitors directly beside their assigned pins, keep the return-current paths short, and reproduce the land pattern from the manufacturer drawing rather than a generic QFN footprint. Confirm pin 1 orientation and exposed-pad connection on the assembly drawing because an incorrect orientation can create a complete power-path error.
The 28-pin QFN package provides its primary thermal path through the exposed pad. Follow the manufacturer land-pattern guidance for thermal-via quantity, diameter, and antipad geometry, and use adequate top- and bottom-layer copper where the enclosure permits it. Validate junction temperature under the maximum expected ambient temperature and switching activity because the digital processor and analog peripherals can create localized heating near the pad even when average board power is moderate.
Separate analog inputs and DAC outputs from high-speed digital clocks and switching return currents. Use a continuous ground reference beneath the device, keep analog traces short, and place any external filtering or reference components close to their corresponding pins. The integrated comparators and DAC reduce external component count, but accurate results still depend on clean reference voltage, suitable trace impedance, and avoiding shared high-current paths with sensitive analog nodes.
Do not treat the QFN-28 footprint as proof that every related C8051F41x MCU is a functional drop-in. Compare the complete pin-description table, peripheral availability, interrupt vector assignments, clock sources, memory capacities, and programming signals before changing the installed device. For C8051F411-GM, the 32 KB Flash capacity can simplify firmware growth, but existing code that assumes 16 KB must still be reviewed for address-map and update behavior.
Budget the 2.25 KB RAM across stack, communication buffers, analog acquisition data, and application variables, and reserve the 16 KB Flash for code, constants, boot logic, and any update mechanism. Use the manufacturer power-on-reset and VDD-monitor behavior when defining system startup. If the design uses the DAC, verify the required reference and output-path components rather than assuming that the digital supply alone is sufficient for predictable analog output.
Informations de conformité
The LCSC product listing identifies C8051F413-GM as RoHS. Manufacturer documentation should be used to confirm lead-free, halogen-free, REACH, conflict-minerals, and automotive-qualification status.