Silicon Labs

C8051F413-GM - 50MHz 8-Bit Mixed-Signal MCU | Silicon Labs

부품 번호: C8051F413-GM ✓ 활성
2 V to 5.25 V Vdss 28-pin QFN, 5 x 5 mm Package 50 MHz Speed 16 KB (16K x 8) Memory
MOQ: 1 |

C8051F413-GM 개요

The Silicon Labs C8051F413-GM is an 8-bit C8051F41x mixed-signal microcontroller with a 50 MHz processor, 16 KB of Flash memory, 2.25 KB of RAM, and a 28-pin QFN package measuring 5 x 5 mm. Its integrated analog and timing resources include a two-channel 12-bit DAC, two comparators, and four 16-bit timers. The device operates from 2 V to 5.25 V and supports integration into compact industrial, consumer, communications, and measurement systems.

A mixed-signal microcontroller is an integrated circuit that combines a digital processor core with analog conversion, comparison, and timing functions. The C8051F41x family belongs to the broader hierarchy of 8-bit MCU, CISC microcontroller, embedded controller, and semiconductor categories. Integrating the DAC, comparators, timers, Flash, and RAM on one device reduces the number of separate components required for embedded control and reduces the complexity of signal routing between analog and digital sections.

The C8051F413 provides 16 KB of Flash for program storage, 2.25 KB of RAM for working data, and a 50 MHz clock. It also integrates a two-channel 12-bit DAC, two analog comparators, four 16-bit timers, an on-chip power-on reset, and a VDD monitor. These resources support digital control, waveform generation, threshold detection, periodic event generation, and compact analog signal conditioning without requiring a separate DAC or comparator package.

The 8051-compatible processor architecture provides a familiar instruction set and deterministic embedded-control behavior, while the mixed-signal peripherals reduce external component count. The 5 x 5 mm QFN-28 package supports compact layouts, but its exposed-pad construction requires careful thermal and layout design. Firmware, peripheral assignments, pin multiplexing, clocking, and power sequencing must be checked against the manufacturer datasheet before the device is used in a new PCB revision.

Typical applications include compact industrial controllers, sensor-conditioning systems, programmable analog output equipment, communications modules, and low-cost embedded instruments. The two DAC channels can generate controlled reference or control voltages, while the comparators can perform fast threshold decisions involving external analog signals. The four 16-bit timers are useful for periodic sampling, pulse-width measurement, and motor or timing-control functions.

For PCB implementation, reserve clean grounding beneath the exposed pad, connect the required decoupling capacitors close to their supply pins, and route analog inputs away from fast digital switching nodes. Confirm the device's startup behavior, oscillator options, analog-reference requirements, and programming procedure in the manufacturer documentation before finalizing firmware and the exposed-pad thermal design.

This product page consolidates the manufacturer specifications, package characteristics, sourcing information, and engineering-focused comparison guidance for the C8051F413-GM. It also distinguishes true package-compatible family options from parts that require broader hardware or firmware validation, helping engineers narrow replacement candidates before starting a board redesign.

드롭인 대체품: C8051F413-GM — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: C8051F413-GM (동일 폼 팩터 및 풋프린트) — 차이점: Package, Power-On Reset, Product Type.

Silicon Labs
Package: 28-pin QFN, 5 mm x 5 mm
Power-On Reset: On-chip
Product Type: Mixed-signal 8-bit Flash microcontroller
비교 대상: C8051F413-GM →

C8051F411-GM

✅ 드롭인
Silicon Labs
📦 QFN-28 (5x5)
Mixed-signal 8-bit Flash microcontroller · 8051-compatible pipelined core · 50 MHz · 50 MIPS · 32 kB Flash (32K x 8) · 2.25 kB · 12 bits · 24 channels

가격 문의

데이터시트 보기 →

C8051F321-GM

✅ 드롭인
📦 QFN-28 (5x5)
Flash and RAM capacities differ by up to 100% from the 16 KB/2.25 KB configuration, while the 28-pin 5 x 5 mm package remains comparable and peripheral assignments require validation.

📋 참조 대체품 (카탈로그에 없음)

C8051F369-GM

✅ 드롭인
Silicon Labs
📦 QFN-28 (5x5)
8-bit mixed-signal flash microcontroller · C8051F36x 8051-compatible core · 50 MHz · 8 bit · 16 KB flash, 16K x 8 organization · 1 KB, 1K x 8 organization · 2.7V to 3.6V · 10-bit, up to 200 ksps

가격 문의

데이터시트 보기 →

C8051F412-GM

✅ 드롭인 ⚠️ 사양 미검증
📦 QFN-28 (5x5)
Same-family memory and peripheral configuration may differ from C8051F413-GM by 0% to 25% in key resources; footprint compatibility still requires pin-table and firmware verification.

📋 참조 대체품 (카탈로그에 없음)

C8051F414-GM

✅ 드롭인 ⚠️ 사양 미검증
📦 QFN-28 (5x5)
Same-family memory and peripheral configuration may differ from C8051F413-GM by 0% to 25% in key resources; footprint compatibility still requires pin-table and firmware verification.

📋 참조 대체품 (카탈로그에 없음)

C8051F413-GM 최대 정격 & 전기적 특성

Product Type 8-bit mixed-signal microcontroller
Processor Core 8051-compatible core
최대 클록 주파수 50 MHz
Flash Memory 16 KB (16K x 8)
RAM 2.25 KB
Supply Voltage Range 2 V to 5.25 V
DAC 2 channels, 12-bit resolution
Comparators 2
Timers 4 x 16-bit timers
패키지 28-pin QFN, 5 x 5 mm
실장 유형 Surface mount
Power-On Reset On chip
VDD Monitor On chip
Communication Interfaces Additional communication interfaces
RoHS 상태 RoHS listed by LCSC

C8051F413-GM 28-pin qfn, 5 x 5 mm 핀 구성 가이드

C8051F413-GM(28-pin qfn, 5 x 5 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

C8051F413-GM의 28-pin qfn, 5 x 5 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: C8051F413-GM.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

C8051F413-GM 적합 용도: 6 애플리케이션s: Industrial Sensor Conditioning, Programmable Analog Output Control, Communications Interface Module, Compact Measurement Instrument, Timing and Pulse Control, Portable Embedded Controller.

🏭

Industrial Sensor Conditioning

The C8051F413-GM fits compact industrial sensor-conditioning modules that require local comparison, periodic sampling, and controlled outputs. Its two comparators can evaluate external signals against configurable thresholds, while the four 16-bit timers support acquisition timing, pulse measurement, and periodic control tasks. The 50 MHz 8051-compatible core can combine peripheral management with communication handling, and the 16 KB Flash provides dedicated space for control firmware. A 2 V to 5.25 V supply range supports both low-voltage sensor nodes and 3.3 V industrial electronics. The principal constraint is the 2.25 KB RAM, so acquisition buffers and communication queues should be sized before final firmware allocation.

⚡

Programmable Analog Output Control

The C8051F413-GM is suited to equipment that requires two independently programmable analog outputs alongside embedded digital control. Its two-channel 12-bit DAC can generate reference levels, excitation voltages, or test signals, while the 50 MHz processor manages set-point logic and output updates. The two comparators can monitor whether an external signal has reached a desired threshold, creating a closed-loop sequence without requiring a separate analog IC. With 16 KB Flash and 2.25 KB RAM, the device is best suited to compact control tasks rather than complex waveform storage. Board design should preserve analog grounding and follow the manufacturer’s DAC, reference, and decoupling recommendations.

🌐

Communications Interface Module

The C8051F413-GM can serve as the local controller in compact communications equipment that needs deterministic timers and mixed-signal functions. The 50 MHz 8051-compatible core provides sufficient instruction throughput for protocol handling, while four 16-bit timers can support baud-rate generation, receive timeouts, and periodic status reporting. The on-chip VDD monitor assists with supply-condition supervision, and the two comparators can support line-level or threshold-based interface functions. The 16 KB Flash and 2.25 KB RAM favor lightweight protocols and bounded message buffers. Designers should verify the available communication peripherals, oscillator requirements, and pin assignments in the manufacturer documentation before selecting the final serial interface configuration.

🔧

Compact Measurement Instrument

The C8051F413-GM fits compact measurement instruments that combine digital computation with programmable analog outputs and threshold detection. Its two-channel 12-bit DAC supports calibration or stimulus generation, while the comparators can perform fast limit checks on external signals. Four 16-bit timers allow accurate interval measurement and periodic sampling, and the 50 MHz processor can execute control and display-adjacent calculations. The device operates from 2 V to 5.25 V, allowing integration into portable and bench-oriented designs. Memory planning is essential because the 2.25 KB RAM is modest for large sample buffers, while the 16 KB Flash must accommodate measurement routines, calibration data, and any in-field update logic.

🖥️

Timing and Pulse Control

The C8051F413-GM is appropriate for embedded timing controllers where multiple periodic events and pulse measurements must be managed locally. Its four 16-bit timers provide dedicated resources for waveform generation, input timing, output compare, and event counting, while the 50 MHz core handles sequencing and supervisory logic. The two comparators can qualify asynchronous threshold events before they are passed to the processor, reducing the need for continuous software polling. The compact QFN-28 package permits integration into dense control assemblies, although its exposed pad requires proper thermal-via layout. Firmware should be validated for timer-clock derivation, interrupt priority, and behavior during power transitions.

📱

Portable Embedded Controller

The C8051F413-GM is suitable for portable embedded-control products that need a low-power operating range, local analog functions, and a compact footprint. Its 2 V to 5.25 V supply capability supports battery-derived systems operating at reduced voltage as well as conventional 3.3 V rails. The integrated DAC, comparators, VDD monitor, and power-on reset reduce the number of supporting components, while the 28-pin 5 x 5 mm QFN leaves board area for sensors or a communication interface. The 16 KB Flash and 2.25 KB RAM limit the product to compact applications, so firmware updates and data buffers require disciplined allocation. Use the manufacturer low-power and power-on behavior information to set the appropriate operating modes.

추천 제품 요약

C8051F411-GM Silicon Labs 사용처: Industrial Sensor Conditioning, Programmable Analog Output Control, Communications Interface Module, Portable Embedded Controller C8051F413-GMR Same device in a tape-and-reel ordering configuration 사용처: Industrial Sensor Conditioning, Communications Interface Module, Portable Embedded Controller C8051F412-GM Same-package mixed-signal family candidate 사용처: Programmable Analog Output Control, Compact Measurement Instrument C8051F414-GM Same-package family candidate 사용처: Compact Measurement Instrument C8051F369-GM Silicon Labs 사용처: Timing and Pulse Control C8051F321-GM Same-package 8-bit MCU candidate 사용처: Timing and Pulse Control
What is the operating voltage of C8051F413-GM?
The C8051F413-GM operates from 2 V to 5.25 V. This range allows the device to support 3.3 V and 5 V system rails while retaining compatibility with lower-voltage mixed-signal designs. According to the Silicon Labs C8051F413 product specifications, the device also includes an on-chip VDD monitor. Confirm the detailed operating limits, power-consumption conditions, and decoupling requirements in the manufacturer datasheet before finalizing the power architecture.
How much Flash and RAM does the C8051F413-GM have?
The C8051F413-GM provides 16 KB of Flash memory and 2.25 KB of RAM. Silicon Labs describes the Flash as 16K x 8, while the manufacturer product page identifies 2.25 KB of RAM for working data and stack requirements. The 16 KB Flash capacity is suitable for compact embedded control, sensor, communications, and analog-output firmware, but application code, boot code, lookup tables, and update routines must all be included in the final memory-budget calculation.
What are the key specifications of C8051F413-GM that engineers should know?
The C8051F413-GM is a 50 MHz 8-bit mixed-signal MCU with 16 KB Flash, 2.25 KB RAM, a two-channel 12-bit DAC, two comparators, four 16-bit timers, and a 28-pin 5 x 5 mm QFN package. According to the Silicon Labs product specifications, the device also includes an on-chip power-on reset and VDD monitor. Its 2 V to 5.25 V supply range makes it suitable for low-voltage embedded systems requiring integrated analog output and comparison functions.
Where can I download the C8051F413-GM datasheet?
The C8051F413-GM datasheet and product information are available from the Silicon Labs C8051F413 product page and the manufacturer document links associated with it. The product page identifies the device as a 50 MHz mixed-signal 8-bit MCU with 16 KB Flash and a QFN-28 package. Use the manufacturer's pin-description table, electrical-characteristics tables, memory map, and package drawings when assigning PCB pins or validating operating limits.
Where can I find the C8051F413-GM pinout?
The C8051F413-GM pinout is shown in the manufacturer's QFN-28 package drawing and pin-description table. The device is specified in a 28-pin QFN package measuring 5 x 5 mm. Use that manufacturer table when assigning power, ground, analog, timer, programming, and communication signals. Pay particular attention to the exposed-pad connection and thermal requirements because these land-pattern details are critical to assembly reliability and heat dissipation.
Is C8051F413-GM suitable for sensor conditioning and monitoring?
Yes, the C8051F413-GM is suitable for compact sensor-conditioning and monitoring designs that benefit from integrated comparators, a two-channel 12-bit DAC, timers, and on-chip monitoring functions. Its 50 MHz processor supports responsive control logic, while the 2.25 KB RAM and 16 KB Flash constrain algorithm and firmware complexity. The exact ADC configuration and analog input limits must be confirmed in the datasheet before defining the sensor front end.
Can the C8051F413-GM generate analog output voltages?
Yes, the C8051F413-GM includes a two-channel 12-bit DAC for generating programmable analog outputs. The Silicon Labs specifications identify the DAC as one of the device's key mixed-signal features. This capability can support reference-voltage generation, excitation signals, test fixtures, or low-speed control outputs. The usable output range, settling behavior, output impedance, reference requirement, and usable update rate should be taken from the manufacturer electrical-characteristics tables.
What is the best drop-in replacement for C8051F413-GM?
The closest verified package-compatible candidates are members of the Silicon Labs C8051F41x family, particularly C8051F411-GM and other 28-pin QFN options. A genuine drop-in decision must confirm the exposed-pad land pattern, every signal assignment, voltage range, clock configuration, memory size, analog peripheral set, and required firmware behavior. C8051F411-GM offers 32 KB Flash, twice the C8051F413-GM's 16 KB, but its additional memory does not automatically guarantee that existing firmware and pin usage remain unchanged.
What can replace C8051F413-GM without changing the PCB footprint?
C8051F411-GM and several related 28-pin QFN family members can be evaluated as footprint-compatible replacements for C8051F413-GM. Pin compatibility still requires comparison of power pins, ground pins, analog channels, timer assignments, clock pins, and programming signals. The C8051F413-GMR is a tape-and-reel ordering option for the same device rather than a distinct functional upgrade, while C8051F321-GM and C8051F369-GM require closer peripheral and firmware validation.
C8051F413-GM vs C8051F411-GM — which is better for new designs?
C8051F411-GM is preferable when 32 KB Flash is important, while C8051F413-GM provides 16 KB Flash in the same general 28-pin QFN family and includes a two-channel 12-bit DAC and two comparators. The C8051F411-GM comparison listing identifies a 32 KB Flash configuration, but every peripheral assignment and pin function must still be checked against the manufacturer documentation. For firmware already designed for the C8051F413, retaining that device generally reduces migration effort.
When should I choose C8051F413-GM over a related C8051F41x MCU?
Choose C8051F413-GM when the design needs a 50 MHz 8-bit MCU with 16 KB Flash, 2.25 KB RAM, a two-channel 12-bit DAC, two comparators, four 16-bit timers, and operation from 2 V to 5.25 V. A related device with 32 KB Flash may be preferable for larger firmware, but changing MCU models can alter pin multiplexing, interrupt assignments, and peripheral availability. Select the closest option only after comparing the pin table and firmware dependencies.
Is C8051F413-GM the same as C8051F413-GMR?
No, C8051F413-GM and C8051F413-GMR refer to different ordering configurations of the C8051F413 device rather than different functional MCUs. Both are listed in the 28-pin QFN 5 x 5 mm format with an 8-bit 8051 core, 50 MHz operation, and 16 KB Flash. The final character commonly distinguishes the shipping format, so the PCB footprint and electrical design remain the same while the packaging and ordering code must be checked.
What is the price of C8051F413-GM?
The current commercial quote for C8051F413-GM is available through the Request a Quote form on this page. Because distributor inventory, lot quantity, and component condition can change quickly, use the form to request the present unit price, applicable quantity breaks, stock position, and lead time for the exact C8051F413-GM ordering code. The same form can be used for prototype quantities, production volumes, and scheduled delivery requirements.
Where can I buy C8051F413-GM online?
Use the Request a Quote form on this page to purchase the exact C8051F413-GM part and request current availability, packaging details, and lead time. The manufacturer product page identifies the C8051F413 as a 50 MHz mixed-signal MCU, and distributor listings confirm that the -GM ordering code is offered in the 28-pin QFN 5 x 5 mm package. Include your required quantity and target delivery date when submitting the request.
What is the lead time and stock status for C8051F413-GM?
Current stock and lead time for C8051F413-GM should be confirmed through the Request a Quote form on this page. Submit the required quantity, date code preference, packaging method, and production schedule so procurement can provide an actionable allocation and delivery estimate. The device's active manufacturer status and distributor catalog presence do not by themselves guarantee that a specific quantity is immediately available.
What is the best cross-brand equivalent for C8051F413-GM?
No cross-brand equivalent can be identified confidently from the available manufacturer and cross-reference information. A valid replacement would need the same 28-pin QFN footprint, pin-compatible power and signal assignments, compatible 2 V to 5.25 V operation, adequate 50 MHz processing performance, sufficient 16 KB Flash and 2.25 KB RAM, and equivalent access to the DAC, comparators, timers, programming interface, and clocking. Use the Request a Quote form for sourcing support while engineering performs that validation.

엔지니어링 참조 데이터: C8051F413-GM — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose C8051F413-GM when the design requires a compact 8-bit mixed-signal controller with a 50 MHz 8051-compatible core, 16 KB Flash, 2.25 KB RAM, two 12-bit DAC channels, two comparators, four 16-bit timers, and a 2 V to 5.25 V operating range. C8051F411-GM is attractive when the firmware budget benefits from 32 KB Flash, although it is identified as a 3.3 V/5 V part and requires complete peripheral validation. C8051F412-GM and C8051F414-GM are same-family candidates worth checking when a revised or enhanced 28-pin QFN configuration is acceptable. C8051F321-GM or C8051F369-GM may suit designs that do not depend on the C8051F413's specified DAC, comparator, timer, and VDD-monitor combination, but they require broader firmware and pin-function review. Treat every replacement as a design qualification project: compare pins, clocks, memory maps, interrupts, analog limits, and programming procedures before releasing a new PCB.

대체품과의 비교

파라미터 이 제품 C8051F411-GM C8051F321-GM C8051F369-GM C8051F412-GM C8051F414-GM
Package QFN-28 (5x5) QFN-28 (5x5) 28-pin QFN family package 28-pin QFN family package QFN-28 (5x5) QFN-28 (5x5)
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Core 8-bit 8051-compatible core 8-bit 8051-compatible core 8-bit MCU 8-bit MCU 8-bit 8051-compatible core 8-bit 8051-compatible core

주요 차별점

  • Integrated two-channel 12-bit DAC within an 8-bit mixed-signal MCU (vs C8051F369-GM)
  • Compact analog and digital integration (vs C8051F321-GM)
  • Balanced 16 KB Flash configuration with extensive mixed-signal resources (vs C8051F411-GM)
  • Wide stated supply-voltage range (vs C8051F411-GM)

설계 노트

Treat the exposed thermal pad as both a thermal path and a package-specific electrical connection defined by the manufacturer layout. Place the required input and decoupling capacitors directly beside their assigned pins, keep the return-current paths short, and reproduce the land pattern from the manufacturer drawing rather than a generic QFN footprint. Confirm pin 1 orientation and exposed-pad connection on the assembly drawing because an incorrect orientation can create a complete power-path error.

The 28-pin QFN package provides its primary thermal path through the exposed pad. Follow the manufacturer land-pattern guidance for thermal-via quantity, diameter, and antipad geometry, and use adequate top- and bottom-layer copper where the enclosure permits it. Validate junction temperature under the maximum expected ambient temperature and switching activity because the digital processor and analog peripherals can create localized heating near the pad even when average board power is moderate.

Separate analog inputs and DAC outputs from high-speed digital clocks and switching return currents. Use a continuous ground reference beneath the device, keep analog traces short, and place any external filtering or reference components close to their corresponding pins. The integrated comparators and DAC reduce external component count, but accurate results still depend on clean reference voltage, suitable trace impedance, and avoiding shared high-current paths with sensitive analog nodes.

Do not treat the QFN-28 footprint as proof that every related C8051F41x MCU is a functional drop-in. Compare the complete pin-description table, peripheral availability, interrupt vector assignments, clock sources, memory capacities, and programming signals before changing the installed device. For C8051F411-GM, the 32 KB Flash capacity can simplify firmware growth, but existing code that assumes 16 KB must still be reviewed for address-map and update behavior.

Budget the 2.25 KB RAM across stack, communication buffers, analog acquisition data, and application variables, and reserve the 16 KB Flash for code, constants, boot logic, and any update mechanism. Use the manufacturer power-on-reset and VDD-monitor behavior when defining system startup. If the design uses the DAC, verify the required reference and output-path components rather than assuming that the digital supply alone is sufficient for predictable analog output.

규정 준수 정보

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The LCSC product listing identifies C8051F413-GM as RoHS. Manufacturer documentation should be used to confirm lead-free, halogen-free, REACH, conflict-minerals, and automotive-qualification status.

데이터 검증일: 2026-11-15 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

C8051F413-GM datasheet C8051F413-GM specifications C8051F413-GM pinout C8051F413 datasheet pdf C8051F413-GM equivalent C8051F413-GM replacement C8051F413-GM cross reference C8051F413-GM vs C8051F411-GM C8051F413-GM QFN-28 footprint C8051F413-GM 50MHz mixed-signal MCU Silicon Labs C8051F413-GM C8051F413-GM price C8051F413-GM stock C8051F413-GM sensor controller C8051F413-GM DAC application

관련 부품 & 용어

Silicon Labs C8051F413-GM C8051F413 C8051F41x C8051F411-GM C8051F321-GM C8051F369-GM C8051F412-GM C8051F414-GM 8051-compatible core 8-bit microcontroller mixed-signal MCU CISC microcontroller embedded controller semiconductor Flash memory RAM 12-bit DAC analog comparator 16-bit timer QFN-28 surface-mount package VDD monitor power-on reset 2 V to 5.25 V
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기