Texas Instruments

CD40110BE - 4-Bit Decade Up/Down Counter | Texas Instruments

Référence : CD40110BE ✓ Actif
3 V to 20 V Vdss 16-pin PDIP Package
MOQ : 1 |

CD40110BE Présentation

The Texas Instruments CD40110BE is a CMOS decade up/down counter with a 4-bit latch and 10 decoded display outputs, operating from a 3 V to 20 V supply in a 16-pin PDIP package. The device counts in either direction through 10 decimal states and provides separate outputs for driving the 10 segments of a common-cathode display. Its operating temperature range is -55°C to 125°C, making it suitable for industrial, instrumentation, laboratory, and legacy display systems.

A decade counter is a sequential digital-logic component that produces a repeating sequence of 10 states rather than the 16 states associated with a conventional binary counter. The CD40110 belongs to the CMOS counter hierarchy: counter, sequential logic, digital logic IC, and semiconductor. Its latch decouples the counting and display outputs, allowing the displayed value to remain stable while the internal counter continues to change.

The principal features include separate up/down and clock inputs, a parallel load function, a master reset, and 10 active-high segment outputs. Operation across a 3 V to 20 V supply range supports both legacy 5 V logic and higher-voltage industrial systems. The 16-pin PDIP package supports conventional through-hole assembly, prototyping, and repair of equipment designed around the CD4000 logic family.

Internally, the CD40110 combines a decade counting section, an output latch, and display-driving circuitry. The latch allows a new count to be captured without repeatedly changing the visible display. Segment outputs are intended for direct connection to suitable common-cathode display segments, while the count direction is selected by the up/down control. Input transitions and reset behavior must be designed to meet the timing requirements stated in the manufacturer datasheet.

Typical applications include digital frequency meters, event counters, laboratory timers, industrial panel meters, decade sequencing, and legacy multiplexed or static decimal displays. The part is especially useful where a decimal count must be displayed directly rather than decoded later by a microcontroller.

For a new design, verify propagation-delay, clock-edge, load, reset, and supply-voltage requirements against the operating speed of the display and surrounding logic. Because the CD40110BE is a through-hole CMOS device, its input rise and fall times, grounding, and decoupling layout remain important even when the counter operates at low frequency.

This page combines the manufacturer function description, package and temperature characteristics, sourcing guidance, compatible alternatives, and practical design considerations to support component selection, schematic review, and legacy-board maintenance.

Alternatives de remplacement direct pour CD40110BE — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

STCD40110BE

✅ Remplacement direct
📦 16-pin PDIP
Same 16-pin PDIP decade-counter architecture and decoded display function; operating voltage, timing, and sourcing status require comparison with the TI datasheet

📋 Alternative de référence (hors catalogue)

CD40110BC

✅ Remplacement direct
📦 16-pin PDIP
Same 16-pin PDIP counter, latch, and 10-output display-driver architecture; verify supply rating and propagation timing against the original circuit

📋 Alternative de référence (hors catalogue)

HEF40110BP

✅ Remplacement direct
📦 16-pin PDIP
Pin-compatible 16-pin PDIP decade counter with a lower typical supply-voltage ceiling than the 20 V CD40110BE rating; not suitable above its specified limit

📋 Alternative de référence (hors catalogue)

TC40110BP

✅ Remplacement direct
📦 16-pin PDIP
Same 16-pin PDIP decade-counter and decoded-output class, with manufacturer-specific supply and timing limits requiring verification

📋 Alternative de référence (hors catalogue)

CD40110BE

✅ Remplacement direct
Texas Instruments
📦 16-pin PDIP
CMOS decade up/down counter, latch, and display driver · CD4000 CMOS · 1 decade element · 4 bit · Up or down · 3 V to 20 V · 20 V · 10 outputs

Contactez-nous pour le prix

Voir la fiche technique →

CD40110BE Valeurs maximales et caractéristiques électriques

Product Type CMOS decade up/down counter, latch, and display driver
Logic Family CD4000 CMOS
Counting Elements 1 decade element
Counter Data Width 4 bit
Count Direction Up or down
Supply Voltage Range 3 V to 20 V
High-Voltage Rating 20 V
Decoded Display Outputs 10 outputs
Plage de température de fonctionnement -55°C to +125°C
Boîtier 16-pin PDIP
Type de montage Through-hole
Logic Type Positive and negative edge-triggered
Output Drive Compatibility Common-cathode decimal display
Reset Function Master reset
Parallel Load Function Yes

Configuration des broches de CD40110BE

DIP-16 Package Pinout Diagram DIP-16 16-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 DIP-16
Broche 1 CLK — Counting clock input
Broche 2 UP/DN — Count-direction control input
Broche 3 LOAD — Parallel load control input
Broche 4 MR — Master-reset input
Broche 5 Q0 — Binary count output Q0
Broche 6 Q1 — Binary count output Q1
Broche 7 Q2 — Binary count output Q2
Broche 8 Q3 — Binary count output Q3
Broche 9 VDD — Positive supply connection
Broche 10 Q4 — Decoded display output 4
Broche 11 Q5 — Decoded display output 5
Broche 12 Q6 — Decoded display output 6
Broche 13 Q7 — Decoded display output 7
Broche 14 Q8 — Decoded display output 8
Broche 15 Q9 — Decoded display output 9
Broche 16 VSS — Ground connection

Applications typiques

CD40110BE convient pour 6 applications: Digital Frequency Counter, Industrial Panel Counter, Laboratory Event Counter, Timed Sequential Display, Decade Sequencer, Legacy Display-System Repair.

🧩

Digital Frequency Counter

The CD40110BE is suitable for a basic digital frequency-counter front end because it counts clock pulses in a selected direction and provides ten decoded outputs for a decimal display. The 3 V to 20 V supply range allows operation in 5 V legacy logic or higher-voltage industrial instrumentation. Place the count clock near the timer input, connect the up/down control to the required counting direction, and use the latch when the display must remain stable during acquisition. The master-reset input initializes the displayed count, while the parallel load input supports preset starting values. Verify maximum counting frequency against clock rise and fall times, propagation delay, and the selected display's settling requirements.

🏭

Industrial Panel Counter

The CD40110BE can serve as the display-counting element in an industrial panel counter because its -55°C to 125°C operating range covers demanding ambient conditions. Its ten decoded segment outputs simplify the connection to a compatible common-cathode decimal display without requiring segment-decoding firmware. The parallel load function allows an operator-selected preset to become the next count, and master reset provides a common zero command. For panel use, retain the through-hole PDIP footprint for straightforward serviceability, provide local supply decoupling, and keep clock and reset traces away from noisy switching-power wiring. Confirm that the display and any added driver transistors meet the available segment-drive and isolation requirements.

🧩

Laboratory Event Counter

The CD40110BE is appropriate for a laboratory event counter when a transparent decade count and direct display outputs are useful. The latch allows the displayed result to remain fixed while the counter accepts subsequent events, and the up/down control can support bidirectional measurement systems. The 16-pin PDIP package is also convenient for breadboard prototypes, retrofit boards, and educational instruments. Use a clean, debounced event input and ensure the pulse duration and repetition rate satisfy the manufacturer's clock requirements. The component itself does not measure time, so a reference oscillator and additional divider logic are required for a timed laboratory counter. Its role is to maintain and display the decimal event count reliably.

⚡

Timed Sequential Display

The CD40110BE can be used in timed sequencing equipment where a decimal count is displayed and periodically loaded or reset. Its latch separates the visible output from the internal count, while the parallel load input allows the next displayed value to be established without reconstructing the counter. The 3 V to 20 V supply range supports both classic CMOS logic and higher-voltage control systems. In a timer design, derive the count clock from a stable reference oscillator and use the load input to synchronize state changes with the timing sequence. Review propagation delay, clock-edge behavior, and display settling before increasing the count rate. Decouple the supply near the device and use defined reset states during power-up.

⚙️

Decade Sequencer

The CD40110BE acts as a decade sequencer by advancing through ten decimal states and exposing each state through individual decoded outputs. This is useful for test fixtures, process-step indicators, and repetitive machinery that needs one active output per decimal position. The 4-bit count and latch architecture allow external control logic to load a new starting state or reset the sequence. Because the device is a fixed decade counter rather than a programmable state machine, it is most effective when exactly ten sequential positions are needed. Use the master-reset input to establish a known state, preserve clean supply grounding, and avoid long unprotected output traces adjacent to high-current switching nodes.

🔧

Legacy Display-System Repair

The CD40110BE is especially useful for repairing legacy decimal-display systems because it combines counting, latching, and ten segment outputs in one through-hole logic package. A failed counter can often be replaced without redesigning the display decoder when the board uses the standard 16-pin CD40110 pinout. The -55°C to 125°C rating supports industrial and laboratory equipment, while the PDIP format simplifies socketed or through-hole replacement. Before fitting the component, compare the failed device's pin functions and electrical limits with the Texas Instruments datasheet, then inspect nearby sockets for bent contacts. Check clock edges, reset priority, display current, and supply voltage because a mechanically similar part can still behave differently in a marginal legacy circuit.

Récapitulatif des produits recommandés

CD4013BE CMOS dual flip-flop usable for input conditioning and clock division Utilisé dans : Digital Frequency Counter, Laboratory Event Counter, Legacy Display-System Repair CD4027BE CMOS dual JK flip-flop for auxiliary state sequencing Utilisé dans : Digital Frequency Counter, Decade Sequencer CD4042BE CMOS ripple counter for extended counting stages Utilisé dans : Digital Frequency Counter, Legacy Display-System Repair CD4011BE CMOS quad NAND gate for control-signal conditioning Utilisé dans : Industrial Panel Counter, Timed Sequential Display, Decade Sequencer CD4001BE CMOS quad NOR gate for reset and load logic Utilisé dans : Industrial Panel Counter, Decade Sequencer CD4070BE CMOS binary counter for additional event division Utilisé dans : Industrial Panel Counter CD4020BE Texas Instruments Utilisé dans : Laboratory Event Counter CD4040BE Texas Instruments Utilisé dans : Laboratory Event Counter, Timed Sequential Display CD4050BE Texas Instruments Utilisé dans : Timed Sequential Display, Legacy Display-System Repair
What is the operating voltage of the CD40110BE?
The CD40110BE operates from a 3 V to 20 V supply, according to the Texas Instruments CD40110B datasheet. This broad range allows the same counter to be used with conventional 5 V CMOS systems and higher-voltage industrial control circuits. Designers should still verify input levels, output drive, and timing at the actual supply voltage selected for the application.
What does the CD40110BE do?
The CD40110BE is a 4-bit CMOS decade up/down counter with an output latch and ten decoded display-driver outputs. According to the Texas Instruments datasheet, it can count upward or downward through ten decimal states and drive the segments of a compatible common-cathode decimal display. The latch helps hold the displayed value stable while the internal count changes.
Where can I download the CD40110BE datasheet PDF?
The official CD40110BE datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/cd40110b.pdf. The manufacturer document identifies the CD40110B family as a CMOS decade up/down counter, latch, and display driver with a 20 V rating. Use the pin-description and truth tables in that document when assigning PCB functions and implementing clock, reset, load, and direction logic.
Where can I find the CD40110BE pinout?
The CD40110BE pinout is shown in the Texas Instruments CD40110B datasheet, and the device uses a 16-pin PDIP package. The pin-description table assigns the clock, up/down control, load, master-reset, four-bit count, ten decoded segment, supply, and ground functions. Use the official pin table to verify physical orientation because a socketed DIP can be installed in different orientations.
What are the key specifications of CD40110BE that engineers should know?
The key CD40110BE specifications are a 3 V to 20 V supply range, 4-bit decade counting, up/down selection, a parallel latch, ten decoded display outputs, a 16-pin PDIP package, and a -55°C to 125°C operating range. The Texas Instruments datasheet also identifies the device as a CMOS decade up/down counter, latch, and display driver with a 20 V rating.
Is the CD40110BE suitable for driving a decimal display?
The CD40110BE is designed to drive a compatible common-cathode decimal display because it provides ten decoded segment outputs. According to the Texas Instruments CD40110B datasheet, the latch can hold the display while counting continues internally. Before connecting a display, confirm its segment topology, current requirements, and whether an external driver or current-limiting arrangement is required.
Where to buy CD40110BE online?
Use the Request a Quote form on this page to request CD40110BE availability, quantity breaks, packaging details, and lead time for your project. The exact MPN is a 16-pin PDIP Texas Instruments device, so package suffix, assembly form, operating grade, and required quantity should be confirmed during quotation. This avoids selecting a mechanically or electrically different variant.
What is the price of CD40110BE?
Use the Request a Quote form on this page for the current CD40110BE price and quantity schedule. Pricing depends on order quantity, package form, supplier inventory, and regional availability. The structured product page is the appropriate place to obtain an updated commercial quotation without relying on a static unit price that may no longer reflect current availability.
What is the lead time for CD40110BE?
Request the current CD40110BE lead time through the Request a Quote form on this page. Lead time can vary with order quantity, manufacturing status, and the requested package form. The Texas Instruments product record identifies CD40110BE as a 16-pin PDIP device rated from -55°C to 125°C, allowing the requested configuration to be specified precisely.
Is CD40110BE in stock?
Current CD40110BE stock should be confirmed through the Request a Quote form on this page. The form allows you to state the required quantity, package form, target date, and acceptable sourcing region. This is preferable to assuming inventory from an individual listing because availability can change rapidly for legacy-style PDIP logic devices.
What can replace CD40110BE?
CD40110BE can be replaced only after confirming identical pin assignment, display-output behavior, supply-voltage limits, and package dimensions. Compatible CD40110-family equivalents include ST CD40110BE, Fairchild CD40110BC, Nexperia HEF40110BP, and Toshiba TC40110BP, but operating-voltage and timing differences must be reviewed. The manufacturer datasheet remains the controlling reference for each replacement.
What is the best Nexperia equivalent for CD40110BE?
The Nexperia HEF40110BP is a mechanically compatible 16-pin DIP alternative for many legacy CD40110 circuits, but it is not an unconditional substitute. The HEF40110 family is normally associated with a lower maximum supply than the CD40110BE's 20 V rating, so it should not be selected for circuits operating above that limit. Confirm pin behavior, reset priority, clocking, and segment-drive requirements before release.
CD40110BE vs CD40110BC - which is better for a legacy display?
Choose CD40110BE when the design specifically requires Texas Instruments sourcing and its documented operating range of 3 V to 20 V. Choose CD40110BC when the original design used the Fairchild CD40110 family and the replacement qualification confirms equivalent timing, display outputs, and supply limits. Both appear in 16-pin PDIP form, but package similarity alone does not establish functional interchangeability.
When should I choose CD40110BE over a microcontroller-based counter?
Choose CD40110BE when a simple, autonomous decade counter and latch can replace most of the display-control logic without adding firmware. Its ten decoded outputs can directly support a compatible decimal display, while the parallel load and master-reset inputs provide basic control functions. A microcontroller remains preferable when counting range, multiple displays, communications, logging, or configurable presets are required.
Is CD40110BE suitable for an industrial counter panel?
The CD40110BE can suit an industrial counter panel when its 3 V to 20 V supply range and -55°C to 125°C operating rating cover the environmental requirements. Its ten decoded outputs simplify connection to a common-cathode display. Industrial qualification also depends on the selected display, connector, power supply, surge exposure, and enclosure, so those components must be reviewed with the complete assembly.
How do clocking and reset affect CD40110BE operation?
The CD40110BE counts in response to the clock and direction controls, while load and master-reset inputs can override the normal counting sequence. According to the Texas Instruments CD40110B datasheet, the device includes a latch for decoded outputs and a master reset for initializing the counter. Use the official truth tables and timing diagrams to guarantee valid reset and load sequences.

Données de référence d'ingénierie pour CD40110BE — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose CD40110BE when the design needs a simple autonomous decade counter with a latch, ten decoded display outputs, a 3 V to 20 V supply range, and a serviceable 16-pin PDIP footprint. It is especially appropriate for legacy industrial counters, laboratory instruments, and frequency displays that do not require programmable counting or communications. STCD40110BE and CD40110BC are useful same-class alternatives when their individual timing and sourcing conditions are preferable, but each manufacturer document must be checked before substitution. Use HEF40110BP only in circuits below its lower supply-voltage ceiling, and use TC40110BP or the Motorola CD40110BE only after confirming equivalent pin behavior and electrical timing. A microcontroller-based counter is the better choice when multiple displays, configurable presets, data logging, communications, or non-decimal counting are required.

Comparaison avec les alternatives

Paramètre Ce produit STCD40110BE CD40110BC HEF40110BP TC40110BP CD40110BE
Brand Texas Instruments STMicroelectronics onsemi Nexperia Toshiba Motorola
Package 16-pin PDIP 16-pin PDIP 16-pin PDIP 16-pin PDIP 16-pin PDIP 16-pin PDIP
Product Function Decade up/down counter, latch, and display driver Decade up/down counter, latch, and display driver Decade up/down counter, latch, and display driver Decade counter with latch and display outputs Decade counter with latch and display outputs Decade up/down counter, latch, and display driver
Mounting Type Through-hole Through-hole Through-hole Through-hole Through-hole Through-hole
Logic Family CD4000 CMOS CMOS 4000 series CMOS 4000 series HEF CMOS 4000 series TC CMOS 4000 series CMOS 4000 series

Principaux différenciateurs

  • Supports a higher supply-voltage class than the HEF-family alternative (vs HEF40110BP)
  • Combines counting, latching, and ten decoded display outputs in one package (vs CD40110BC)
  • Directly supports decade display decoding rather than binary-only counting (vs MC14516BCPG)

Notes de conception

Place the CD40110BE close to the clock source and the decimal display to minimize clock-edge ringing and display-output trace capacitance. Keep the supply and ground connections short, add a local supply bypass capacitor at the IC, and route the ground return directly to the board ground plane. If the display is physically distant, use buffered segment connections rather than long unprotected traces.

Use clean, fast clock edges and account for the propagation delay of the counter and any preceding CMOS gates when determining the maximum useful count rate. Avoid routing the clock adjacent to switching-regulator or relay-control traces. A pull device may be useful on unused control inputs where appropriate, but its value should be selected from the device's input-level requirements rather than assumed.

Confirm that the counter, latch, master-reset, and parallel-load interactions meet the truth-table requirements before driving a display. Resetting the counter does not automatically guarantee which latch state appears first if load and reset are asserted together. Use a defined reset sequence and verify segment polarity, display common-anode or common-cathode configuration, and segment-current limits before connecting the outputs.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The Texas Instruments product record and manufacturer datasheet identify the CD40110BE as an active 16-pin PDIP CMOS counter rated from -55°C to 125°C. RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 statuses require confirmation from current manufacturer documentation.

Recherches associées

cd40110be datasheet cd40110be ic price CD40110BE datasheet pdf CD40110BE pinout CD40110BE 16 pin PDIP CD40110BE decade counter CD40110BE display driver CD40110BE drop-in replacement CD40110BE vs STCD40110BE CD40110BE operating voltage Texas Instruments CD40110BE CD40110BE replacement

Composants & termes associés

Texas Instruments CD40110BE CD40110B STCD40110BE CD40110BC HEF40110BP TC40110BP Motorola CD40110BE decade counter up/down counter counter and latch display driver CMOS logic CD4000 series 4-bit counter 10-segment display driver common-cathode display logic IC semiconductor PDIP-16 through-hole package parallel load master reset clock input supply voltage industrial instrumentation
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ