CD40110BE - 4-Bit Decade Up/Down Counter | Texas Instruments
MPN: CD40110BE ✓ פעילCD40110BE סקירה
A decade counter is a sequential digital-logic component that produces a repeating sequence of 10 states rather than the 16 states associated with a conventional binary counter. The CD40110 belongs to the CMOS counter hierarchy: counter, sequential logic, digital logic IC, and semiconductor. Its latch decouples the counting and display outputs, allowing the displayed value to remain stable while the internal counter continues to change.
The principal features include separate up/down and clock inputs, a parallel load function, a master reset, and 10 active-high segment outputs. Operation across a 3 V to 20 V supply range supports both legacy 5 V logic and higher-voltage industrial systems. The 16-pin PDIP package supports conventional through-hole assembly, prototyping, and repair of equipment designed around the CD4000 logic family.
Internally, the CD40110 combines a decade counting section, an output latch, and display-driving circuitry. The latch allows a new count to be captured without repeatedly changing the visible display. Segment outputs are intended for direct connection to suitable common-cathode display segments, while the count direction is selected by the up/down control. Input transitions and reset behavior must be designed to meet the timing requirements stated in the manufacturer datasheet.
Typical applications include digital frequency meters, event counters, laboratory timers, industrial panel meters, decade sequencing, and legacy multiplexed or static decimal displays. The part is especially useful where a decimal count must be displayed directly rather than decoded later by a microcontroller.
For a new design, verify propagation-delay, clock-edge, load, reset, and supply-voltage requirements against the operating speed of the display and surrounding logic. Because the CD40110BE is a through-hole CMOS device, its input rise and fall times, grounding, and decoupling layout remain important even when the counter operates at low frequency.
This page combines the manufacturer function description, package and temperature characteristics, sourcing guidance, compatible alternatives, and practical design considerations to support component selection, schematic review, and legacy-board maintenance.
חלופות תחליף ישיר עבור CD40110BE — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
STCD40110BE
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
CD40110BC
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
HEF40110BP
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
TC40110BP
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
CD40110BE
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←CD40110BE דירוגים מרביים ומאפיינים חשמליים
| Product Type | CMOS decade up/down counter, latch, and display driver |
| Logic Family | CD4000 CMOS |
| Counting Elements | 1 decade element |
| Counter Data Width | 4 bit |
| Count Direction | Up or down |
| Supply Voltage Range | 3 V to 20 V |
| High-Voltage Rating | 20 V |
| Decoded Display Outputs | 10 outputs |
| טווח טמפרטורת פעולה | -55°C to +125°C |
| מארז | 16-pin PDIP |
| סוג הרכבה | Through-hole |
| Logic Type | Positive and negative edge-triggered |
| Output Drive Compatibility | Common-cathode decimal display |
| Reset Function | Master reset |
| Parallel Load Function | Yes |
תצורת פינים של CD40110BE
| פין 1 | CLK — Counting clock input |
| פין 2 | UP/DN — Count-direction control input |
| פין 3 | LOAD — Parallel load control input |
| פין 4 | MR — Master-reset input |
| פין 5 | Q0 — Binary count output Q0 |
| פין 6 | Q1 — Binary count output Q1 |
| פין 7 | Q2 — Binary count output Q2 |
| פין 8 | Q3 — Binary count output Q3 |
| פין 9 | VDD — Positive supply connection |
| פין 10 | Q4 — Decoded display output 4 |
| פין 11 | Q5 — Decoded display output 5 |
| פין 12 | Q6 — Decoded display output 6 |
| פין 13 | Q7 — Decoded display output 7 |
| פין 14 | Q8 — Decoded display output 8 |
| פין 15 | Q9 — Decoded display output 9 |
| פין 16 | VSS — Ground connection |
יישומים טיפוסיים
CD40110BE מתאים עבור 6 יישוםs: Digital Frequency Counter, Industrial Panel Counter, Laboratory Event Counter, Timed Sequential Display, Decade Sequencer, Legacy Display-System Repair.
Digital Frequency Counter
The CD40110BE is suitable for a basic digital frequency-counter front end because it counts clock pulses in a selected direction and provides ten decoded outputs for a decimal display. The 3 V to 20 V supply range allows operation in 5 V legacy logic or higher-voltage industrial instrumentation. Place the count clock near the timer input, connect the up/down control to the required counting direction, and use the latch when the display must remain stable during acquisition. The master-reset input initializes the displayed count, while the parallel load input supports preset starting values. Verify maximum counting frequency against clock rise and fall times, propagation delay, and the selected display's settling requirements.
מומלץ
Industrial Panel Counter
The CD40110BE can serve as the display-counting element in an industrial panel counter because its -55°C to 125°C operating range covers demanding ambient conditions. Its ten decoded segment outputs simplify the connection to a compatible common-cathode decimal display without requiring segment-decoding firmware. The parallel load function allows an operator-selected preset to become the next count, and master reset provides a common zero command. For panel use, retain the through-hole PDIP footprint for straightforward serviceability, provide local supply decoupling, and keep clock and reset traces away from noisy switching-power wiring. Confirm that the display and any added driver transistors meet the available segment-drive and isolation requirements.
מומלץ
Laboratory Event Counter
The CD40110BE is appropriate for a laboratory event counter when a transparent decade count and direct display outputs are useful. The latch allows the displayed result to remain fixed while the counter accepts subsequent events, and the up/down control can support bidirectional measurement systems. The 16-pin PDIP package is also convenient for breadboard prototypes, retrofit boards, and educational instruments. Use a clean, debounced event input and ensure the pulse duration and repetition rate satisfy the manufacturer's clock requirements. The component itself does not measure time, so a reference oscillator and additional divider logic are required for a timed laboratory counter. Its role is to maintain and display the decimal event count reliably.
מומלץ
Timed Sequential Display
The CD40110BE can be used in timed sequencing equipment where a decimal count is displayed and periodically loaded or reset. Its latch separates the visible output from the internal count, while the parallel load input allows the next displayed value to be established without reconstructing the counter. The 3 V to 20 V supply range supports both classic CMOS logic and higher-voltage control systems. In a timer design, derive the count clock from a stable reference oscillator and use the load input to synchronize state changes with the timing sequence. Review propagation delay, clock-edge behavior, and display settling before increasing the count rate. Decouple the supply near the device and use defined reset states during power-up.
מומלץ
Decade Sequencer
The CD40110BE acts as a decade sequencer by advancing through ten decimal states and exposing each state through individual decoded outputs. This is useful for test fixtures, process-step indicators, and repetitive machinery that needs one active output per decimal position. The 4-bit count and latch architecture allow external control logic to load a new starting state or reset the sequence. Because the device is a fixed decade counter rather than a programmable state machine, it is most effective when exactly ten sequential positions are needed. Use the master-reset input to establish a known state, preserve clean supply grounding, and avoid long unprotected output traces adjacent to high-current switching nodes.
מומלץ
Legacy Display-System Repair
The CD40110BE is especially useful for repairing legacy decimal-display systems because it combines counting, latching, and ten segment outputs in one through-hole logic package. A failed counter can often be replaced without redesigning the display decoder when the board uses the standard 16-pin CD40110 pinout. The -55°C to 125°C rating supports industrial and laboratory equipment, while the PDIP format simplifies socketed or through-hole replacement. Before fitting the component, compare the failed device's pin functions and electrical limits with the Texas Instruments datasheet, then inspect nearby sockets for bent contacts. Check clock edges, reset priority, display current, and supply voltage because a mechanically similar part can still behave differently in a marginal legacy circuit.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור CD40110BE — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | STCD40110BE | CD40110BC | HEF40110BP | TC40110BP | CD40110BE |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | STMicroelectronics | onsemi | Nexperia | Toshiba | Motorola |
| Package | 16-pin PDIP | 16-pin PDIP | 16-pin PDIP | 16-pin PDIP | 16-pin PDIP | 16-pin PDIP |
| Product Function | Decade up/down counter, latch, and display driver | Decade up/down counter, latch, and display driver | Decade up/down counter, latch, and display driver | Decade counter with latch and display outputs | Decade counter with latch and display outputs | Decade up/down counter, latch, and display driver |
| Mounting Type | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole |
| Logic Family | CD4000 CMOS | CMOS 4000 series | CMOS 4000 series | HEF CMOS 4000 series | TC CMOS 4000 series | CMOS 4000 series |
מבדילים עיקריים
- Supports a higher supply-voltage class than the HEF-family alternative (לעומתHEF40110BP)
- Combines counting, latching, and ten decoded display outputs in one package (לעומתCD40110BC)
- Directly supports decade display decoding rather than binary-only counting (לעומתMC14516BCPG)
הערות תכנון
Place the CD40110BE close to the clock source and the decimal display to minimize clock-edge ringing and display-output trace capacitance. Keep the supply and ground connections short, add a local supply bypass capacitor at the IC, and route the ground return directly to the board ground plane. If the display is physically distant, use buffered segment connections rather than long unprotected traces.
Use clean, fast clock edges and account for the propagation delay of the counter and any preceding CMOS gates when determining the maximum useful count rate. Avoid routing the clock adjacent to switching-regulator or relay-control traces. A pull device may be useful on unused control inputs where appropriate, but its value should be selected from the device's input-level requirements rather than assumed.
Confirm that the counter, latch, master-reset, and parallel-load interactions meet the truth-table requirements before driving a display. Resetting the counter does not automatically guarantee which latch state appears first if load and reset are asserted together. Use a defined reset sequence and verify segment polarity, display common-anode or common-cathode configuration, and segment-current limits before connecting the outputs.
מידע על תאימות
The Texas Instruments product record and manufacturer datasheet identify the CD40110BE as an active 16-pin PDIP CMOS counter rated from -55°C to 125°C. RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 statuses require confirmation from current manufacturer documentation.