CD40110BE - 4-Bit Decade Up/Down Counter | Texas Instruments
MPN: CD40110BE ✓ AktifCD40110BE Ringkasan
A decade counter is a sequential digital-logic component that produces a repeating sequence of 10 states rather than the 16 states associated with a conventional binary counter. The CD40110 belongs to the CMOS counter hierarchy: counter, sequential logic, digital logic IC, and semiconductor. Its latch decouples the counting and display outputs, allowing the displayed value to remain stable while the internal counter continues to change.
The principal features include separate up/down and clock inputs, a parallel load function, a master reset, and 10 active-high segment outputs. Operation across a 3 V to 20 V supply range supports both legacy 5 V logic and higher-voltage industrial systems. The 16-pin PDIP package supports conventional through-hole assembly, prototyping, and repair of equipment designed around the CD4000 logic family.
Internally, the CD40110 combines a decade counting section, an output latch, and display-driving circuitry. The latch allows a new count to be captured without repeatedly changing the visible display. Segment outputs are intended for direct connection to suitable common-cathode display segments, while the count direction is selected by the up/down control. Input transitions and reset behavior must be designed to meet the timing requirements stated in the manufacturer datasheet.
Typical applications include digital frequency meters, event counters, laboratory timers, industrial panel meters, decade sequencing, and legacy multiplexed or static decimal displays. The part is especially useful where a decimal count must be displayed directly rather than decoded later by a microcontroller.
For a new design, verify propagation-delay, clock-edge, load, reset, and supply-voltage requirements against the operating speed of the display and surrounding logic. Because the CD40110BE is a through-hole CMOS device, its input rise and fall times, grounding, and decoupling layout remain important even when the counter operates at low frequency.
This page combines the manufacturer function description, package and temperature characteristics, sourcing guidance, compatible alternatives, and practical design considerations to support component selection, schematic review, and legacy-board maintenance.
Pilihan pengganti yang segera untuk CD40110BE — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
STCD40110BE
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
CD40110BC
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
HEF40110BP
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
TC40110BP
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
CD40110BE
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →CD40110BE Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | CMOS decade up/down counter, latch, and display driver |
| Logic Family | CD4000 CMOS |
| Counting Elements | 1 decade element |
| Counter Data Width | 4 bit |
| Count Direction | Up or down |
| Supply Voltage Range | 3 V to 20 V |
| High-Voltage Rating | 20 V |
| Decoded Display Outputs | 10 outputs |
| Gambaran Suhu Operasi | -55°C to +125°C |
| Kemasan | 16-pin PDIP |
| Jenis Pemasangan | Through-hole |
| Logic Type | Positive and negative edge-triggered |
| Output Drive Compatibility | Common-cathode decimal display |
| Reset Function | Master reset |
| Parallel Load Function | Yes |
Konfigurasi Pin CD40110BE
| Pin 1 | CLK — Counting clock input |
| Pin 2 | UP/DN — Count-direction control input |
| Pin 3 | LOAD — Parallel load control input |
| Pin 4 | MR — Master-reset input |
| Pin 5 | Q0 — Binary count output Q0 |
| Pin 6 | Q1 — Binary count output Q1 |
| Pin 7 | Q2 — Binary count output Q2 |
| Pin 8 | Q3 — Binary count output Q3 |
| Pin 9 | VDD — Positive supply connection |
| Pin 10 | Q4 — Decoded display output 4 |
| Pin 11 | Q5 — Decoded display output 5 |
| Pin 12 | Q6 — Decoded display output 6 |
| Pin 13 | Q7 — Decoded display output 7 |
| Pin 14 | Q8 — Decoded display output 8 |
| Pin 15 | Q9 — Decoded display output 9 |
| Pin 16 | VSS — Ground connection |
Aplikasi Biasa
CD40110BE patut untuk 6 aplikasis: Digital Frequency Counter, Industrial Panel Counter, Laboratory Event Counter, Timed Sequential Display, Decade Sequencer, Legacy Display-System Repair.
Digital Frequency Counter
The CD40110BE is suitable for a basic digital frequency-counter front end because it counts clock pulses in a selected direction and provides ten decoded outputs for a decimal display. The 3 V to 20 V supply range allows operation in 5 V legacy logic or higher-voltage industrial instrumentation. Place the count clock near the timer input, connect the up/down control to the required counting direction, and use the latch when the display must remain stable during acquisition. The master-reset input initializes the displayed count, while the parallel load input supports preset starting values. Verify maximum counting frequency against clock rise and fall times, propagation delay, and the selected display's settling requirements.
Disebarkan
Industrial Panel Counter
The CD40110BE can serve as the display-counting element in an industrial panel counter because its -55°C to 125°C operating range covers demanding ambient conditions. Its ten decoded segment outputs simplify the connection to a compatible common-cathode decimal display without requiring segment-decoding firmware. The parallel load function allows an operator-selected preset to become the next count, and master reset provides a common zero command. For panel use, retain the through-hole PDIP footprint for straightforward serviceability, provide local supply decoupling, and keep clock and reset traces away from noisy switching-power wiring. Confirm that the display and any added driver transistors meet the available segment-drive and isolation requirements.
Disebarkan
Laboratory Event Counter
The CD40110BE is appropriate for a laboratory event counter when a transparent decade count and direct display outputs are useful. The latch allows the displayed result to remain fixed while the counter accepts subsequent events, and the up/down control can support bidirectional measurement systems. The 16-pin PDIP package is also convenient for breadboard prototypes, retrofit boards, and educational instruments. Use a clean, debounced event input and ensure the pulse duration and repetition rate satisfy the manufacturer's clock requirements. The component itself does not measure time, so a reference oscillator and additional divider logic are required for a timed laboratory counter. Its role is to maintain and display the decimal event count reliably.
Disebarkan
Timed Sequential Display
The CD40110BE can be used in timed sequencing equipment where a decimal count is displayed and periodically loaded or reset. Its latch separates the visible output from the internal count, while the parallel load input allows the next displayed value to be established without reconstructing the counter. The 3 V to 20 V supply range supports both classic CMOS logic and higher-voltage control systems. In a timer design, derive the count clock from a stable reference oscillator and use the load input to synchronize state changes with the timing sequence. Review propagation delay, clock-edge behavior, and display settling before increasing the count rate. Decouple the supply near the device and use defined reset states during power-up.
Disebarkan
Decade Sequencer
The CD40110BE acts as a decade sequencer by advancing through ten decimal states and exposing each state through individual decoded outputs. This is useful for test fixtures, process-step indicators, and repetitive machinery that needs one active output per decimal position. The 4-bit count and latch architecture allow external control logic to load a new starting state or reset the sequence. Because the device is a fixed decade counter rather than a programmable state machine, it is most effective when exactly ten sequential positions are needed. Use the master-reset input to establish a known state, preserve clean supply grounding, and avoid long unprotected output traces adjacent to high-current switching nodes.
Disebarkan
Legacy Display-System Repair
The CD40110BE is especially useful for repairing legacy decimal-display systems because it combines counting, latching, and ten segment outputs in one through-hole logic package. A failed counter can often be replaced without redesigning the display decoder when the board uses the standard 16-pin CD40110 pinout. The -55°C to 125°C rating supports industrial and laboratory equipment, while the PDIP format simplifies socketed or through-hole replacement. Before fitting the component, compare the failed device's pin functions and electrical limits with the Texas Instruments datasheet, then inspect nearby sockets for bent contacts. Check clock edges, reset priority, display current, and supply voltage because a mechanically similar part can still behave differently in a marginal legacy circuit.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk CD40110BE — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | STCD40110BE | CD40110BC | HEF40110BP | TC40110BP | CD40110BE |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | STMicroelectronics | onsemi | Nexperia | Toshiba | Motorola |
| Package | 16-pin PDIP | 16-pin PDIP | 16-pin PDIP | 16-pin PDIP | 16-pin PDIP | 16-pin PDIP |
| Product Function | Decade up/down counter, latch, and display driver | Decade up/down counter, latch, and display driver | Decade up/down counter, latch, and display driver | Decade counter with latch and display outputs | Decade counter with latch and display outputs | Decade up/down counter, latch, and display driver |
| Mounting Type | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole |
| Logic Family | CD4000 CMOS | CMOS 4000 series | CMOS 4000 series | HEF CMOS 4000 series | TC CMOS 4000 series | CMOS 4000 series |
Penyeberangsung Jelas
- Supports a higher supply-voltage class than the HEF-family alternative (vsHEF40110BP)
- Combines counting, latching, and ten decoded display outputs in one package (vsCD40110BC)
- Directly supports decade display decoding rather than binary-only counting (vsMC14516BCPG)
Catatan Desain
Place the CD40110BE close to the clock source and the decimal display to minimize clock-edge ringing and display-output trace capacitance. Keep the supply and ground connections short, add a local supply bypass capacitor at the IC, and route the ground return directly to the board ground plane. If the display is physically distant, use buffered segment connections rather than long unprotected traces.
Use clean, fast clock edges and account for the propagation delay of the counter and any preceding CMOS gates when determining the maximum useful count rate. Avoid routing the clock adjacent to switching-regulator or relay-control traces. A pull device may be useful on unused control inputs where appropriate, but its value should be selected from the device's input-level requirements rather than assumed.
Confirm that the counter, latch, master-reset, and parallel-load interactions meet the truth-table requirements before driving a display. Resetting the counter does not automatically guarantee which latch state appears first if load and reset are asserted together. Use a defined reset sequence and verify segment polarity, display common-anode or common-cathode configuration, and segment-current limits before connecting the outputs.
Maklumat Kesediaan
The Texas Instruments product record and manufacturer datasheet identify the CD40110BE as an active 16-pin PDIP CMOS counter rated from -55°C to 125°C. RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 statuses require confirmation from current manufacturer documentation.