Texas Instruments

DP83865DVH/NOPB - 1GbE 8/8 Ethernet PHY | Texas Instruments

Référence : DP83865DVH/NOPB ✓ Actif
1.71 V to 3.465 V Vdss 128-PQFP Package
MOQ : 1 |

DP83865DVH/NOPB Présentation

The Texas Instruments DP83865DVH/NOPB is a single-port Gigabit Ethernet physical-layer transceiver with 8/8 drivers and receivers, 1 Gbit/s data-rate capability, and 128-PQFP packaging. Its integrated physical medium dependent sublayer supports 10BASE-T, 100BASE-TX, and 1000BASE-T Ethernet protocols, making it a physical-layer interface for equipment that requires both 10/100M and 1G Ethernet connectivity.

An Ethernet physical-layer transceiver, commonly called an Ethernet PHY, converts digital data into electrical signaling for a physical copper network and recovers incoming signaling into digital data. Within the product hierarchy, an Ethernet PHY is an interface IC connected between a network controller or processor and a magnetics-based Ethernet interface. The DP83865DVH/NOPB combines the higher-layer physical coding sublayer, medium-access control physical medium dependent sublayer, and copper PHY functions in one device.

The DP83865DVH/NOPB supports data rates up to 1 Gbit/s and uses an 8/8 transceiver arrangement for four transmit and four receive channels. It operates across a listed supply-voltage range of 1.71 V to 3.465 V and has a specified operating-temperature range of 0°C to +70°C. Its 128-pin PQFP package measures approximately 14 mm by 20 mm and uses surface-mount assembly.

At the device level, the DP83865 family combines 10BASE-T, 100BASE-TX, and 1000BASE-T support with an integrated 8/8 driver and receiver configuration. This integration allows a system designed around a single Ethernet PHY to support multiple copper Ethernet speed modes while limiting the number of discrete line-driver and receiver components required on the board.

Typical applications include industrial Ethernet gateways, network switches, routers, set-top equipment, embedded servers, printer controllers, and other systems that connect a digital processor to a 10/100/1000BASE-T network. In these designs, the PHY normally interfaces with an Ethernet magnetics module through transformer-coupled differential pairs, while a network controller or communications processor handles the MAC and protocol layers.

A critical layout requirement is a carefully controlled high-speed differential network between the PHY and Ethernet transformer. Keep the transmit and receive pairs routed with continuous impedance, minimize stub lengths, use symmetric routing, and place the magnetic device close to the network connector. Power and decoupling networks should likewise be arranged to isolate sensitive transceiver circuits from switching and high-current loads.

This product page organizes the DP83865DVH/NOPB specifications, verified drop-in replacement information, application guidance, and design considerations into an engineering-focused reference. It also distinguishes the original 128-PQFP device from the newer DP83867IRPAPR identified as a pin-compatible replacement, helping engineers evaluate whether the electrical and firmware requirements of an existing design permit a direct substitution.

Alternatives de remplacement direct pour DP83865DVH/NOPB — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec DP83865DVH/NOPB (même facteur de forme et même empreinte) — différant par Operating Temperature Range, Product Type.

Texas Instruments
Operating Temperature Range: -40 °C to 85 °C
Product Type: 10/100/1000 Base-T Ethernet physical-layer transceiver

DP83867IRPAPR

✅ Remplacement direct
Texas Instruments
📦 128-PQFP
10/100/1000 Base-T Ethernet physical-layer transceiver · 10/100/1000 Mb/s · 1000 Mb/s · RGMII and SGMII · 1 port · -40 °C to 85 °C · Industrial temperature · 64-pin HTQFP (PAP)

Contactez-nous pour le prix

Voir la fiche technique →

DP83865DVH/NOPB Spécifications

Product Type Gigabit Ethernet physical-layer transceiver
Supported Ethernet Protocols 10BASE-T, 100BASE-TX, and 1000BASE-T
Maximum Data Rate 1 Gbit/s
Driver and Receiver Configuration 8/8
Number of Transceivers 1
Supply Voltage Range 1.71 V to 3.465 V
Alternate Listed Supply Voltage Range 2.375 V to 3.465 V
Plage de température de fonctionnement 0°C to +70°C
Package Type 128-PQFP
Package Dimensions 14 mm x 20 mm
Nombre de broches 128 pins
Type de montage Surface mount
Integrated Physical Functions PCS, PMA, and PMD sublayers

Guide de configuration des broches du DP83865DVH/NOPB 14 mm x 20 mm

Configuration des broches du DP83865DVH/NOPB (boîtier 14 mm x 20 mm). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier 14 mm x 20 mm pour le DP83865DVH/NOPB

Aucune donnée de brochage détaillée disponible pour DP83865DVH/NOPB.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

DP83865DVH/NOPB convient pour 6 applications: Industrial Ethernet Gateway, Network Switch, Router, Embedded Server, Set-Top Box, Networked Printer Controller.

🏭

Industrial Ethernet Gateway

The DP83865DVH/NOPB fits an industrial Ethernet gateway that must support 10, 100, and 1000 Mbit/s copper links while controlling board area. Its 1 Gbit/s capability, integrated PCS, PMA, and PMD functions, and 8/8 transceiver arrangement provide one physical-layer solution for multiple Ethernet rates. The device’s 0°C to +70°C range suits commercial-temperature gateway designs, while systems requiring wider environmental limits should use a suitably rated PHY. Place the Ethernet magnetics close to the shielded connector and route the differential pairs as controlled-impedance lines.

🌐

Network Switch

A multiport network switch can use the DP83865DVH/NOPB when each copper port requires 10/100/1000BASE-T support and compact board construction. Its maximum 1 Gbit/s data rate and integrated medium-access-control physical functions eliminate the need for separate PMD devices on each port. The 128-PQFP footprint requires careful fanout and layer planning in a multilayer switch PCB. Maintain symmetry between each transmit and receive pair, minimize connector-to-PHY distance, and provide low-impedance supply connections with local high-frequency decoupling.

🌐

Router

The DP83865DVH/NOPB is appropriate for a router with a copper WAN or LAN interface supporting 10BASE-T, 100BASE-TX, or 1000BASE-T. Its integrated PCS, PMA, and PMD layers provide the physical Ethernet interface while the host processor handles routing and higher-level traffic management. The 1.71 V to 3.465 V listed supply range supports low-voltage system architectures. Use manufacturer reference layouts to control differential-pair impedance and keep the transformer and line-side protection components close to the external network connector.

🖥️

Embedded Server

The DP83865DVH/NOPB can provide the physical layer for an embedded server or single-board computer that needs backward-compatible 10/100/1000BASE-T connectivity. The single integrated PHY avoids a separate physical-layer device for each supported copper speed, while the 8/8 driver-and-receiver configuration supports the device’s differential channels. In a dense embedded board, provide uninterrupted ground planes beneath the 128-lead footprint and route each high-speed pair away from clocks, switching regulators, and memory buses.

📺

Set-Top Box

The DP83865DVH/NOPB is suitable for a set-top box requiring one or more copper Ethernet connections with automatic support for 10, 100, and 1000 Mbit/s. Its 1 Gbit/s maximum data rate accommodates local-network transfers, and the integrated PCS, PMA, and PMD blocks reduce the external component count associated with the Ethernet physical layer. The commercial 0°C to +70°C range matches many indoor set-top environments. Follow the manufacturer’s isolation, magnetics, and reference-layout guidance to preserve signal and surge-performance margins.

🖨️

Networked Printer Controller

A networked printer controller can use the DP83865DVH/NOPB to connect a printer main board through copper Ethernet while retaining compatibility with slower 10BASE-T and 100BASE-TX networks. The device supports rates through 1 Gbit/s and consolidates the physical medium access, physical coding, and medium-dependent functions into one package. Because the 128-PQFP lead pitch limits routing flexibility, use a multilayer PCB with short escape traces, matched pair lengths, and a low-impedance ground reference beneath the PHY and magnetics area.

What is the DP83865DVH/NOPB?
The DP83865DVH/NOPB is a Texas Instruments single-port Gigabit Ethernet physical-layer transceiver rated for data rates up to 1 Gbit/s. According to the Texas Instruments DP83865 datasheet, it integrates the physical coding sublayer, PMA, and PMD functions for 10BASE-T, 100BASE-TX, and 1000BASE-T operation. The device uses an 8/8 driver-and-receiver configuration and is packaged in a 128-PQFP measuring approximately 14 mm by 20 mm.
What Ethernet speeds does DP83865DVH/NOPB support?
The DP83865DVH/NOPB supports 10BASE-T, 100BASE-TX, and 1000BASE-T Ethernet, with a maximum listed data rate of 1 Gbit/s. According to the Texas Instruments DP83865 datasheet, the integrated PCS, PMA, and PMD sublayers allow the same physical-layer device to accommodate 10, 100, and 1000 Mbit/s copper-network operation. This makes it suitable for equipment designed to negotiate multiple Ethernet speeds through a single PHY implementation.
What is the supply voltage range of DP83865DVH/NOPB?
The listed operating supply-voltage range is 1.71 V to 3.465 V, with another component listing describing 2.375 V to 3.465 V. According to the Texas Instruments DP83865 datasheet and manufacturer part information, the device is intended for low-voltage digital and analog supply rails. Confirm the exact rail requirements, operating regions, and decoupling values against the manufacturer datasheet before finalizing the power architecture.
What package does DP83865DVH/NOPB use?
The DP83865DVH/NOPB uses a 128-pin PQFP package measuring approximately 14 mm by 20 mm. According to the Texas Instruments product information, it is a surface-mount Ethernet physical-layer transceiver. Because the package has 128 fine-pitch leads and includes a high-speed differential Ethernet interface, its footprint requires a multilayer PCB with controlled impedance, short escape routes, and careful ground-plane treatment.
Where can I download the DP83865DVH/NOPB datasheet PDF?
The DP83865DVH/NOPB datasheet can be reached through the linked Texas Instruments DP83865 documentation and the indexed 88-page PDF copy. The manufacturer datasheet is the controlling document for pin descriptions, electrical characteristics, register addresses, application circuits, and layout requirements. Use its pin-description table when assigning every one of the 128 package connections and review the reference layout before releasing the PCB.
Where can I find the DP83865DVH/NOPB pinout?
The DP83865DVH/NOPB pinout is located in the pin-description and terminal-configuration tables of the Texas Instruments DP83865 datasheet. The device has 128 PQFP leads, so each signal, supply, ground, reserved, and no-connect position must be assigned from that table rather than inferred from a generic Ethernet-PHY footprint. Confirm exposed-pad or thermal-ground requirements directly from the manufacturer documentation.
Is DP83867IRPAPR a drop-in replacement for DP83865DVH/NOPB?
The DP83867IRPAPR is identified as a pin-compatible replacement for the DP83865DVH/NOPB because both use a 128-PQFP footprint and a 1.71 V to 3.465 V supply range. The replacement relationship is also listed by the manufacturer family context. Despite the shared mechanical interface, engineers should still compare clocking, register access, media-access-control behavior, interrupt behavior, and application-specific settings before production substitution.
What can replace DP83865DVH/NOPB?
The DP83867IRPAPR is the clearest documented drop-in replacement for the DP83865DVH/NOPB because it shares the 128-PQFP package, pinout, and 1.71 V to 3.465 V voltage range. According to the replacement listing, it can be used in most 1 Gbit/s Ethernet designs without hardware changes. A firmware and register-map review remains necessary because a shared footprint does not guarantee identical startup, diagnostic, or interrupt behavior.
Is DP83865DVH/NOPB suitable for industrial Ethernet equipment?
The DP83865DVH/NOPB is suitable for commercial-temperature copper Ethernet equipment rated from 0°C to +70°C. According to the Texas Instruments DP83865 datasheet, its integrated 10/100/1000BASE-T support and 1 Gbit/s capability fit gateways, controllers, and embedded network interfaces operating within that range. Industrial systems requiring extended-temperature operation should select a PHY version explicitly qualified for their environmental target.
DP83865DVH/NOPB vs DP83867IRPAPR: which PHY is better for a new design?
The DP83867IRPAPR is preferable for a new 1 Gbit/s design when its additional device capabilities and software support justify changing the engineering baseline. Both parts share the 128-PQFP footprint and 1.71 V to 3.465 V supply range, making the DP83867IRPAPR a practical replacement path. The Texas Instruments documentation should be compared for register compatibility, clock requirements, diagnostics, and application-note support.
When should I choose DP83865DVH/NOPB over DP83867IRPAPR?
Choose the DP83865DVH/NOPB when an existing design already uses its established register behavior, software drivers, magnetics selection, and reference layout. The DP83867IRPAPR is better considered for a new design when the newer family offers preferred features or support. Both provide a 128-PQFP footprint, so the decision should be based on verified register, clock, startup, and application compatibility rather than package interchangeability alone.
What are the key specifications of DP83865DVH/NOPB?
The key specifications are 1 Gbit/s maximum data rate, 10BASE-T, 100BASE-TX, and 1000BASE-T support, an 8/8 transceiver configuration, and a 1.71 V to 3.465 V listed supply range. According to the Texas Instruments DP83865 datasheet, the device integrates PCS, PMA, and PMD functions. It uses a 128-PQFP package and has a stated 0°C to +70°C operating-temperature range.
How should the DP83865DVH/NOPB be connected to Ethernet magnetics?
The DP83865DVH/NOPB connects through differential PHY pairs to an Ethernet transformer module, which provides galvanic isolation and impedance coupling to the network cable. According to the Texas Instruments DP83865 application guidance, the high-speed traces should be short, impedance-controlled, and symmetrically routed. Place the magnetics close to the network connector and follow the manufacturer reference layout for component placement and return paths.
What is the best Texas Instruments equivalent for DP83865DVH/NOPB?
The best documented Texas Instruments equivalent is the DP83867IRPAPR because the replacement listing identifies the same 128-PQFP package, pinout, and 1.71 V to 3.465 V voltage range. It is described as a drop-in functional replacement in most 1 Gbit/s Ethernet applications. Verify firmware initialization, register compatibility, clocking, interrupt mapping, and any magnetics or layout differences before approving the substitution.
Where can I buy DP83865DVH/NOPB and check its lead time?
Use the Request a Quote form on this XAIPART page to ask about DP83865DVH/NOPB availability, lead time, and order handling. The part is listed as a 128-PQFP, 8/8 Gigabit Ethernet transceiver by Texas Instruments. A current supplier confirmation is required for production planning because inventory, lot availability, and delivery schedules can change independently of the component's technical specifications.
How much does DP83865DVH/NOPB cost and is it in stock?
The current commercial terms and available quantity for DP83865DVH/NOPB should be requested through the Request a Quote form on this page. The component is identified by Texas Instruments as a 1 Gbit/s, 8/8 Gigabit Ethernet physical-layer transceiver in a 128-PQFP package. Use the quote response for current unit pricing, stock status, minimum order quantity, and lead-time confirmation.

Données de référence d'ingénierie pour DP83865DVH/NOPB — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the DP83865DVH/NOPB when maintaining an established 10/100/1000BASE-T design whose PCB, firmware, register map, magnetics selection, and reference layout are already based on the DP83865 family. Its documented 1 Gbit/s rate, 8/8 transceiver arrangement, and 1.71 V to 3.465 V supply range make it appropriate for commercial-temperature gateways, switches, routers, and embedded controllers. Consider the DP83867IRPAPR when the shared 128-PQFP footprint and supply range are attractive for a revised or new design and its updated device capabilities are preferred. Treat that change as more than a mechanical substitution: verify clocking, initialization, host-interface timing, interrupt behavior, diagnostics, and software support. Neither choice should be selected solely from the package code; Ethernet signal integrity, magnetics, thermal conditions, and firmware compatibility determine whether the design will operate reliably.

Comparaison avec les alternatives

Paramètre Ce produit DP83867IRPAPR
Package 128-PQFP 128-PQFP
Brand Texas Instruments Texas Instruments
Supply Voltage Range 1.71 V to 3.465 V 1.71 V to 3.465 V
Number of Pins 128 pins 128 pins

Principaux différenciateurs

  • Broad copper Ethernet speed support in one physical-layer device (vs DP83867IRPAPR)
  • Established 8/8 driver-and-receiver configuration (vs DP83867IRPAPR)
  • Mechanical compatibility with a documented newer-family replacement (vs DP83867IRPAPR)

Notes de conception

Route every differential Ethernet pair as a controlled-impedance transmission line with continuous reference planes, symmetrical geometry, and no unnecessary stubs. Follow the Texas Instruments DP83865 reference layout for pair breakout from the 128-PQFP, component placement, and separation between transmit and receive channels. Place the Ethernet magnetics close to the connector so the connector-to-PHY path remains short and protected from external cable transients.

Use a multilayer PCB with a continuous ground plane beneath the PHY and uninterrupted supply planes around the 128-lead footprint. Place required bypass capacitors at their designated power pins and keep their current loops compact. Separate noisy switching-regulator paths from the differential network and sensitive transceiver return-current paths. Confirm layer-stack impedance and component clearances against the manufacturer application guidance before fabrication.

A shared package and supply range do not by themselves prove that two Ethernet PHYs are interchangeable. When evaluating DP83867IRPAPR for a DP83865DVH/NOPB design, compare register addresses, initialization sequence, clock requirements, interrupt polarity, autonegotiation behavior, cable diagnostics, and the host-interface timing. Preserve the original footprint only after software and schematic checks confirm that the replacement is acceptable for the intended product.

Keep the PHY-to-magnetics copper section short and isolated from noisy digital and power-conversion circuitry. Use manufacturer-recommended magnetic-module and line-side protection arrangements, and maintain a low-impedance return path beneath each differential pair. Avoid routing Ethernet signals parallel to switching-node traces or high-current supply paths for extended distances, because inductive coupling can degrade the 1 Gbit/s signal margin.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The DP83865DVH/NOPB is an Ethernet interface IC rather than an automotive-qualified device; no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement is included in the available product information.

Données vérifiées le : 2026-11-09 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

dp83865dvh nopb DP83865DVH/NOPB datasheet DP83865DVH/NOPB pinout DP83865DVH/NOPB datasheet pdf Texas Instruments DP83865DVH/NOPB DP83865DVH/NOPB 1 Gbit/s DP83865DVH/NOPB 128-PQFP DP83865DVH/NOPB equivalent DP83865DVH/NOPB replacement DP83865DVH/NOPB vs DP83867IRPAPR DP83865DVH/NOPB application circuit DP83865DVH/NOPB price DP83865DVH/NOPB stock DP83865DVH/NOPB footprint

Composants & termes associés

Texas Instruments DP83865DVH/NOPB DP83865 DP83867IRPAPR Gigabit Ethernet PHY Ethernet physical-layer transceiver Physical Coding Sublayer Physical Medium Access sublayer Physical Medium Dependent sublayer PCS PMA PMD 10BASE-T 100BASE-TX 1000BASE-T 1 Gbit/s Ethernet 128-PQFP PQFP package family surface-mount package differential pair Ethernet magnetics low-dropout regulator RoHS REACH
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ