DP83865DVH/NOPB - 1GbE 8/8 Ethernet PHY | Texas Instruments
MPN: DP83865DVH/NOPB ✓ AktifDP83865DVH/NOPB Ringkasan
An Ethernet physical-layer transceiver, commonly called an Ethernet PHY, converts digital data into electrical signaling for a physical copper network and recovers incoming signaling into digital data. Within the product hierarchy, an Ethernet PHY is an interface IC connected between a network controller or processor and a magnetics-based Ethernet interface. The DP83865DVH/NOPB combines the higher-layer physical coding sublayer, medium-access control physical medium dependent sublayer, and copper PHY functions in one device.
The DP83865DVH/NOPB supports data rates up to 1 Gbit/s and uses an 8/8 transceiver arrangement for four transmit and four receive channels. It operates across a listed supply-voltage range of 1.71 V to 3.465 V and has a specified operating-temperature range of 0°C to +70°C. Its 128-pin PQFP package measures approximately 14 mm by 20 mm and uses surface-mount assembly.
At the device level, the DP83865 family combines 10BASE-T, 100BASE-TX, and 1000BASE-T support with an integrated 8/8 driver and receiver configuration. This integration allows a system designed around a single Ethernet PHY to support multiple copper Ethernet speed modes while limiting the number of discrete line-driver and receiver components required on the board.
Typical applications include industrial Ethernet gateways, network switches, routers, set-top equipment, embedded servers, printer controllers, and other systems that connect a digital processor to a 10/100/1000BASE-T network. In these designs, the PHY normally interfaces with an Ethernet magnetics module through transformer-coupled differential pairs, while a network controller or communications processor handles the MAC and protocol layers.
A critical layout requirement is a carefully controlled high-speed differential network between the PHY and Ethernet transformer. Keep the transmit and receive pairs routed with continuous impedance, minimize stub lengths, use symmetric routing, and place the magnetic device close to the network connector. Power and decoupling networks should likewise be arranged to isolate sensitive transceiver circuits from switching and high-current loads.
This product page organizes the DP83865DVH/NOPB specifications, verified drop-in replacement information, application guidance, and design considerations into an engineering-focused reference. It also distinguishes the original 128-PQFP device from the newer DP83867IRPAPR identified as a pin-compatible replacement, helping engineers evaluate whether the electrical and firmware requirements of an existing design permit a direct substitution.
Pilihan pengganti yang segera untuk DP83865DVH/NOPB — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera DP83865DVH/NOPB (sama faktor bentuk dan kaki) — berbeza dalam Operating Temperature Range, Product Type.
DP83867IRPAPR
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →DP83865DVH/NOPB Spesifikasi
| Product Type | Gigabit Ethernet physical-layer transceiver |
| Supported Ethernet Protocols | 10BASE-T, 100BASE-TX, and 1000BASE-T |
| Maximum Data Rate | 1 Gbit/s |
| Driver and Receiver Configuration | 8/8 |
| Number of Transceivers | 1 |
| Supply Voltage Range | 1.71 V to 3.465 V |
| Alternate Listed Supply Voltage Range | 2.375 V to 3.465 V |
| Gambaran Suhu Operasi | 0°C to +70°C |
| Package Type | 128-PQFP |
| Package Dimensions | 14 mm x 20 mm |
| Bilangan Pin | 128 pins |
| Jenis Pemasangan | Surface mount |
| Integrated Physical Functions | PCS, PMA, and PMD sublayers |
Panduan Konfigurasi Pin DP83865DVH/NOPB 14 mm x 20 mm
Konfigurasi pin untuk DP83865DVH/NOPB (14 mm x 20 mm pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.
Tiada data garisan pin yang diperoleh untuk DP83865DVH/NOPB.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
DP83865DVH/NOPB patut untuk 6 aplikasis: Industrial Ethernet Gateway, Network Switch, Router, Embedded Server, Set-Top Box, Networked Printer Controller.
Industrial Ethernet Gateway
The DP83865DVH/NOPB fits an industrial Ethernet gateway that must support 10, 100, and 1000 Mbit/s copper links while controlling board area. Its 1 Gbit/s capability, integrated PCS, PMA, and PMD functions, and 8/8 transceiver arrangement provide one physical-layer solution for multiple Ethernet rates. The device’s 0°C to +70°C range suits commercial-temperature gateway designs, while systems requiring wider environmental limits should use a suitably rated PHY. Place the Ethernet magnetics close to the shielded connector and route the differential pairs as controlled-impedance lines.
Disebarkan
Network Switch
A multiport network switch can use the DP83865DVH/NOPB when each copper port requires 10/100/1000BASE-T support and compact board construction. Its maximum 1 Gbit/s data rate and integrated medium-access-control physical functions eliminate the need for separate PMD devices on each port. The 128-PQFP footprint requires careful fanout and layer planning in a multilayer switch PCB. Maintain symmetry between each transmit and receive pair, minimize connector-to-PHY distance, and provide low-impedance supply connections with local high-frequency decoupling.
Disebarkan
Router
The DP83865DVH/NOPB is appropriate for a router with a copper WAN or LAN interface supporting 10BASE-T, 100BASE-TX, or 1000BASE-T. Its integrated PCS, PMA, and PMD layers provide the physical Ethernet interface while the host processor handles routing and higher-level traffic management. The 1.71 V to 3.465 V listed supply range supports low-voltage system architectures. Use manufacturer reference layouts to control differential-pair impedance and keep the transformer and line-side protection components close to the external network connector.
Disebarkan
Embedded Server
The DP83865DVH/NOPB can provide the physical layer for an embedded server or single-board computer that needs backward-compatible 10/100/1000BASE-T connectivity. The single integrated PHY avoids a separate physical-layer device for each supported copper speed, while the 8/8 driver-and-receiver configuration supports the device’s differential channels. In a dense embedded board, provide uninterrupted ground planes beneath the 128-lead footprint and route each high-speed pair away from clocks, switching regulators, and memory buses.
Disebarkan
Set-Top Box
The DP83865DVH/NOPB is suitable for a set-top box requiring one or more copper Ethernet connections with automatic support for 10, 100, and 1000 Mbit/s. Its 1 Gbit/s maximum data rate accommodates local-network transfers, and the integrated PCS, PMA, and PMD blocks reduce the external component count associated with the Ethernet physical layer. The commercial 0°C to +70°C range matches many indoor set-top environments. Follow the manufacturer’s isolation, magnetics, and reference-layout guidance to preserve signal and surge-performance margins.
Disebarkan
Networked Printer Controller
A networked printer controller can use the DP83865DVH/NOPB to connect a printer main board through copper Ethernet while retaining compatibility with slower 10BASE-T and 100BASE-TX networks. The device supports rates through 1 Gbit/s and consolidates the physical medium access, physical coding, and medium-dependent functions into one package. Because the 128-PQFP lead pitch limits routing flexibility, use a multilayer PCB with short escape traces, matched pair lengths, and a low-impedance ground reference beneath the PHY and magnetics area.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk DP83865DVH/NOPB — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | DP83867IRPAPR |
|---|---|---|
| Package | 128-PQFP | 128-PQFP |
| Brand | Texas Instruments | Texas Instruments |
| Supply Voltage Range | 1.71 V to 3.465 V | 1.71 V to 3.465 V |
| Number of Pins | 128 pins | 128 pins |
Penyeberangsung Jelas
- Broad copper Ethernet speed support in one physical-layer device (vsDP83867IRPAPR)
- Established 8/8 driver-and-receiver configuration (vsDP83867IRPAPR)
- Mechanical compatibility with a documented newer-family replacement (vsDP83867IRPAPR)
Catatan Desain
Route every differential Ethernet pair as a controlled-impedance transmission line with continuous reference planes, symmetrical geometry, and no unnecessary stubs. Follow the Texas Instruments DP83865 reference layout for pair breakout from the 128-PQFP, component placement, and separation between transmit and receive channels. Place the Ethernet magnetics close to the connector so the connector-to-PHY path remains short and protected from external cable transients.
Use a multilayer PCB with a continuous ground plane beneath the PHY and uninterrupted supply planes around the 128-lead footprint. Place required bypass capacitors at their designated power pins and keep their current loops compact. Separate noisy switching-regulator paths from the differential network and sensitive transceiver return-current paths. Confirm layer-stack impedance and component clearances against the manufacturer application guidance before fabrication.
A shared package and supply range do not by themselves prove that two Ethernet PHYs are interchangeable. When evaluating DP83867IRPAPR for a DP83865DVH/NOPB design, compare register addresses, initialization sequence, clock requirements, interrupt polarity, autonegotiation behavior, cable diagnostics, and the host-interface timing. Preserve the original footprint only after software and schematic checks confirm that the replacement is acceptable for the intended product.
Keep the PHY-to-magnetics copper section short and isolated from noisy digital and power-conversion circuitry. Use manufacturer-recommended magnetic-module and line-side protection arrangements, and maintain a low-impedance return path beneath each differential pair. Avoid routing Ethernet signals parallel to switching-node traces or high-current supply paths for extended distances, because inductive coupling can degrade the 1 Gbit/s signal margin.
Maklumat Kesediaan
The DP83865DVH/NOPB is an Ethernet interface IC rather than an automotive-qualified device; no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement is included in the available product information.