Texas Instruments

DS90CF386MTD - 3.3V 85MHz LVDS FPD Receiver | Texas Instruments

Référence : DS90CF386MTD ✓ Actif
+3.3 V Vdss 56-pin TSSOP (DGG) Package 85 MHz Speed
MOQ : 1 |

DS90CF386MTD Présentation

Texas Instruments DS90CF386MTD is a +3.3 V LVDS receiver for 24-bit or 18-bit flat panel display links, operating at a maximum clock frequency of 85 MHz. The device is supplied in a 56-pin TSSOP package and is identified by the DGG package designation. It converts differential LVDS serial data into parallel CMOS data for display-interface applications.

An LVDS receiver, or low-voltage differential-signaling receiver, is an interface circuit that detects small differential voltages across paired conductors and converts them into digital logic signals. LVDS belongs to the broader differential-data-interface and display-interface hierarchy, where it is used to reduce signal amplitude, improve noise immunity, and support reliable high-speed transmission over a compact printed-circuit-board connection. The DS90CF386 is therefore a display-link receiver rather than a general-purpose logic buffer or voltage regulator.

The receiver phase-locks to the incoming LVDS clock, samples the serial bit streams presented on the LVDS data lines, and produces parallel output data. According to the manufacturer product documentation, the receiver LVDS clock operates from 20 MHz to 85 MHz. At an incoming clock rate of 85 MHz, each LVDS input line operates at 595 Mbps, producing a maximum throughput of 2.38 Gbps for the DS90CF386 configuration.

The DS90CF386 family supports 24-bit and 18-bit flat panel display links and is intended for systems requiring parallel digital data delivery after LVDS deserialization. The 56-pin TSSOP package is surface mount and provides the package arrangement used by the DS90CF386MTD ordering option. The manufacturer lists a -10°C to +70°C operating-temperature range for this ordering option.

Typical applications include flat-panel LCD controller interfaces, digital display links, industrial display equipment, and other systems that transmit high-speed display data across a differential interface. The 85 MHz clock rate supports demanding pixel-data streams while the parallel output reduces the need for repeated high-speed differential reception downstream.

When designing the receiver, preserve controlled-impedance routing for the LVDS clock and data pairs, keep the receiver and transmitter ground references well connected, and place bypass and termination components according to the manufacturer reference layout. Confirm the exact pin assignments and signal names for the 56-pin DGG package in the manufacturer datasheet before assigning PCB nets.

This page combines the manufacturer’s interface description, package information, operating limits, and practical implementation guidance with a focused comparison of drop-in candidates. It is intended to help engineers identify the correct DS90CF386 ordering option, understand its LVDS throughput, and plan a compatible display-interface layout.

Alternatives de remplacement direct pour DS90CF386MTD — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec DS90CF386MTD (même facteur de forme et même empreinte) — différant par Package, Product Type, Supply Voltage.

Texas Instruments
Package: 56-pin TSSOP
Product Type: Programmable LVDS flat-panel display transmitter
Supply Voltage: 3.3 V
Comparer avec DS90CF386MTD →

DS90C383MTDX

✅ Remplacement direct
Texas Instruments
📦 56-pin TSSOP
Programmable LVDS flat-panel display transmitter · 3.3 V · 65 MHz · 227 Mbps · 28 bits · 24 bits · 4 differential streams · 1 differential phase-locked transmit clock link

Contactez-nous pour le prix

Voir la fiche technique →

DS90CF364AMTD

✅ Remplacement direct
📦 56-pin TSSOP
Comparison candidate identified by cross-reference results; exact LVDS timing, channel count, and pin-function differences require datasheet validation

📋 Alternative de référence (hors catalogue)

DS90CF386MTD Spécifications

Product Type LVDS flat-panel-display link receiver
Tension d'alimentation +3.3 V
Maximum LVDS Clock Frequency 85 MHz
Minimum LVDS Clock Frequency 20 MHz
LVDS Bit Rate at 85 MHz Clock 595 Mbps per LVDS input line
Maximum Throughput 2.38 Gbps for DS90CF386 configuration
Supported Data Width 24-bit or 18-bit
Clocking Method Phase-locked to input LVDS clock
Output Interface Parallel CMOS data
Boîtier 56-pin TSSOP (DGG)
Package Type Surface mount
Température de fonctionnement -10°C to +70°C
Nombre de broches 56 pins
Manufacturer Texas Instruments

Guide de configuration des broches du DS90CF386MTD surface mount

Configuration des broches du DS90CF386MTD (boîtier surface mount). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier surface mount pour le DS90CF386MTD

Aucune donnée de brochage détaillée disponible pour DS90CF386MTD.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

DS90CF386MTD convient pour 6 applications: Flat-Panel LCD Display Interface, Industrial Display Controller Board, Digital Signage Display Module, Medical Monitor Display, Test and Measurement Front Panel, Video Processing Board.

📺

Flat-Panel LCD Display Interface

The DS90CF386MTD fits a flat-panel LCD link in which a display transmitter serializes pixel data over differential LVDS pairs and the controller board requires parallel CMOS data. Its 20 MHz to 85 MHz LVDS clock range supports high-rate display traffic, while the 24-bit and 18-bit configurations align with common panel interface requirements. At 85 MHz, each LVDS line carries 595 Mbps and the DS90CF386 configuration reaches 2.38 Gbps maximum throughput. Place the receiver close to the display connector, route clock and data as controlled-impedance differential pairs, and use the manufacturer pin table to map the parallel outputs into the receiving controller.

🏭

Industrial Display Controller Board

DS90CF386MTD is appropriate for industrial display electronics that receive high-speed pixel data from a remote or mezzanine display module. The 56-pin TSSOP package provides a defined surface-mount footprint, while the receiver’s phase-locked clocking converts differential serial streams into parallel CMOS outputs for the controller. Its -10°C to +70°C listed operating range suits many indoor industrial environments, although the final system must confirm its own thermal requirements. Maintain a low-impedance ground plane and provide local bypass capacitance so display noise does not interfere with adjacent control or processing circuitry.

📺

Digital Signage Display Module

The DS90CF386MTD can be used in digital signage systems where long internal cable or board interconnects carry LVDS display data to a panel controller. Differential signaling reduces sensitivity to common-mode noise compared with single-ended links, and the receiver’s 85 MHz maximum clock rate supports demanding video and control traffic. The design should use matched pair geometry, controlled impedance, and an uninterrupted ground reference between transmitter and receiver. Verify that the chosen panel’s serializer uses the supported 24-bit or 18-bit data organization and that the controller timing is compatible with the recovered clock.

💊

Medical Monitor Display

DS90CF386MTD can support the display-data path of a medical monitor when the system architecture uses a +3.3 V LVDS transmitter and requires parallel data at the display controller. The receiver supports clock rates from 20 MHz to 85 MHz and converts the incoming serialized pixel data with phase-locked clock recovery. Medical equipment design must separately assess safety, isolation, EMC, and environmental requirements; the receiver’s interface role does not itself establish medical certification. In implementation, keep the LVDS pairs away from noisy switching nodes and use a stable reference plane to reduce the chance of data errors at the panel interface.

🔧

Test and Measurement Front Panel

DS90CF386MTD is useful in test and measurement equipment that receives high-resolution display information from a remote processing or graphics section. The LVDS receiver can accept a 24-bit or 18-bit display link at rates up to 85 MHz and provide parallel CMOS outputs to the display controller. This arrangement helps keep high-speed differential routing confined to a controlled board or cable interface. For laboratory equipment, decouple the receiver locally, provide uninterrupted return-current paths, and validate signal integrity with the actual display cable and connector because propagation loss and reflections depend on the complete channel.

📺

Video Processing Board

The DS90CF386MTD fits a video processing board where an upstream serializer transmits parallel video data across a compact LVDS connection to a display or downstream processing block. Supporting up to 85 MHz clock operation, the receiver phase-locks to the incoming clock and recovers parallel data from the differential inputs. The 56-pin TSSOP arrangement can simplify assembly compared with larger fine-pitch alternatives. Confirm the exact data mapping, power requirements, and timing of the source serializer before layout, and route differential clock separately from noisy power-converter areas.

What is the DS90CF386MTD?
The DS90CF386MTD is a Texas Instruments +3.3 V LVDS receiver for 24-bit or 18-bit flat-panel-display links. It receives differential serial data, phase-locks to the LVDS clock, and converts the serial streams into parallel CMOS output data. The device operates from a 20 MHz to 85 MHz receiver clock range and is packaged in a 56-pin TSSOP, designated DGG by Texas Instruments.
What is the maximum clock frequency of the DS90CF386MTD?
The DS90CF386MTD supports an incoming LVDS clock rate up to 85 MHz. According to the Texas Instruments DS90CF3x6 datasheet, each LVDS input line operates at 595 Mbps at the 85 MHz clock rate. The resulting maximum throughput is 2.38 Gbps for the DS90CF386 configuration. The receiver also supports clock rates down to 20 MHz.
Where can I download the DS90CF386MTD datasheet PDF?
The manufacturer datasheet is available through the Texas Instruments DS90CF386 literature link at https://www.ti.com/lit/gpn/DS90CF386. The official product page is https://www.ti.com/product/DS90CF386. Use the manufacturer literature for the DS90CF3x6 family, the 56-pin DGG package pin assignments, electrical characteristics, and application information before finalizing the PCB layout.
Where can I find the DS90CF386MTD pinout?
The DS90CF386MTD pinout is documented in the Texas Instruments DS90CF3x6 datasheet and corresponds to the 56-pin TSSOP DGG package. Use the manufacturer pin-description table to assign LVDS inputs, parallel outputs, power, ground, and control nets. The package diagram is also represented by the package SVG key tssop-56, but the manufacturer datasheet remains the authoritative source for pin names and functions.
Where can I buy the DS90CF386MTD online?
The DS90CF386MTD can be requested through the Request a Quote form on this page. The form is the appropriate route for current supply, quantity, and order-processing questions. The manufacturer product page at https://www.ti.com/product/DS90CF386 identifies the device as a +3.3 V 85 MHz LVDS flat-panel-display receiver in the 56-pin TSSOP package.
What is the price of the DS90CF386MTD?
Current DS90CF386MTD pricing is handled through the Request a Quote form on this page rather than embedded as a static price. Use that form to request the quantity break, availability, and order terms for the exact DS90CF386MTD ordering option. The part is identified by Texas Instruments as a 56-pin DGG TSSOP device intended for +3.3 V LVDS display links.
What is the lead time for the DS90CF386MTD?
The current lead time for the DS90CF386MTD should be confirmed through the Request a Quote form on this page. Lead time can depend on order quantity, manufacturing status, and packaging requirements. The official Texas Instruments product page identifies the DS90CF386MTD in a 56-pin DGG package with a -10°C to +70°C operating range.
Is the DS90CF386MTD in stock?
Current stock for the DS90CF386MTD should be checked through the Request a Quote form on this page. The form supports direct confirmation of availability and order quantity for the exact MPN. Texas Instruments identifies the device as a DS90CF386-family +3.3 V, 85 MHz LVDS receiver in a 56-pin TSSOP package.
What are the key specifications of DS90CF386MTD that engineers should know?
The DS90CF386MTD is a +3.3 V LVDS display-link receiver with a 20 MHz to 85 MHz clock range, 24-bit or 18-bit data support, and parallel CMOS outputs. At the 85 MHz clock rate, each LVDS input line reaches 595 Mbps and the DS90CF386 configuration reaches 2.38 Gbps maximum throughput. The package is 56-pin TSSOP, with a listed operating-temperature range of -10°C to +70°C.
Can the DS90CF386MTD replace another 56-pin LVDS receiver?
The DS90CF386MTD can replace another receiver only when the alternative has the same 56-pin TSSOP footprint, matching pin functions, compatible supply requirements, and equivalent LVDS timing and data-width behavior. The manufacturer materials identify the target as a +3.3 V, 85 MHz, 24-bit or 18-bit LVDS receiver. Always verify the candidate’s pinout and electrical limits against the Texas Instruments datasheet before treating it as a drop-in replacement.
When should I choose the DS90CF386MTD over an alternative LVDS receiver?
Choose the DS90CF386MTD when the design requires a +3.3 V receiver with a 20 MHz to 85 MHz LVDS clock range, 24-bit or 18-bit deserialization, parallel CMOS outputs, and the 56-pin DGG TSSOP footprint. It is particularly suitable for flat-panel-display links where the source device is designed for LVDS serialization and the receiving controller expects parallel data. Choose another candidate only after confirming exact pin compatibility and timing requirements.
Is the DS90CF386MTD suitable for a flat-panel LCD controller?
The DS90CF386MTD is suitable for a flat-panel LCD controller interface when the transmitter uses compatible +3.3 V LVDS signaling and the controller requires parallel CMOS data. The receiver supports 24-bit and 18-bit links, locks to the incoming LVDS clock, and handles clock rates up to 85 MHz. PCB routing should preserve controlled-impedance differential pairs and provide a solid ground reference.
What is the difference between the DS90CF386MTD and DS90C383MTDX?
The DS90CF386MTD is identified as a +3.3 V, 85 MHz, 24-bit or 18-bit LVDS flat-panel-display receiver in a 56-pin TSSOP package. A DS90C383MTDX comparison is available in the cross-reference results, but the comparison material does not provide enough verified detail here to assert identical pin functions, electrical ratings, or timing behavior. Treat it as a candidate for validation, not an automatic drop-in substitute.
What can replace the DS90CF386MTD?
A direct replacement for the DS90CF386MTD must be a 56-pin TSSOP LVDS receiver with matching LVDS clock rate, data width, supply voltage, and pin functions. The available comparison results identify DS90C383MTDX and DS90CF364AMTD as comparison candidates, but they do not establish all required drop-in conditions. Verify the manufacturer datasheets and footprint before approving a replacement.
Is the DS90CF386MTD the same as a generic +3.3 V LVDS receiver?
No. The DS90CF386MTD is a specific Texas Instruments 24-bit or 18-bit flat-panel-display link receiver with a 20 MHz to 85 MHz clock range and a 56-pin TSSOP package. A generic +3.3 V LVDS receiver may use a different pin arrangement, data format, clock range, or supply sequencing. The DS90CF386MTD should be selected only when those interface requirements match the manufacturer’s DS90CF3x6 documentation.
How should the DS90CF386MTD be used in a display-link PCB?
Place the DS90CF386MTD near the LVDS input connector or display interface boundary and route the differential clock and data pairs as controlled-impedance traces. The receiver phase-locks to the incoming LVDS clock and converts the serial streams to parallel CMOS outputs. Keep bypass connections short, maintain a continuous ground reference, and follow the Texas Instruments DS90CF3x6 reference layout for termination and decoupling.
What is the DS90CF386MTD operating temperature range?
The DS90CF386MTD ordering option is listed with an operating-temperature range of -10°C to +70°C. The temperature range is one of several qualifications to check when selecting a replacement. A substitute must satisfy the required environmental range in addition to having a compatible 56-pin TSSOP footprint, equivalent LVDS timing, and matching data and control functions.
Does the DS90CF386MTD support 24-bit flat-panel-display links?
Yes. The DS90CF386MTD supports 24-bit or 18-bit flat-panel-display links and operates with a +3.3 V supply. At the maximum 85 MHz incoming clock rate, each LVDS input line operates at 595 Mbps and the DS90CF386 configuration achieves a maximum throughput of 2.38 Gbps. The parallel CMOS output is intended for the receiving display or controller interface.

Données de référence d'ingénierie pour DS90CF386MTD — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the DS90CF386MTD when the system uses a +3.3 V LVDS flat-panel-display link with a 20 MHz to 85 MHz receiver clock and requires 24-bit or 18-bit deserialization into parallel CMOS data. Its 56-pin DGG TSSOP package is appropriate for designs already assigned to that footprint and its -10°C to +70°C range covers many commercial and indoor industrial environments. DS90C383MTDX and DS90CF364AMTD are comparison candidates, but the available comparison information does not prove that their data widths, clock ranges, or pin functions are identical. Use either only after checking the relevant manufacturer datasheets, timing specifications, and footprint. For a new design, prefer the DS90CF386MTD when its documented 85 MHz operating point and 2.38 Gbps DS90CF386 throughput match the display architecture. Avoid substitution when the source transmitter uses a different LVDS data organization or when the receiving controller requires functions not provided by the DS90CF386.

Comparaison avec les alternatives

Paramètre Ce produit DS90C383MTDX DS90CF364AMTD
Brand Texas Instruments Texas Instruments Texas Instruments
Package 56-pin TSSOP (DGG) 56-pin TSSOP 56-pin TSSOP

Principaux différenciateurs

  • Supports both 24-bit and 18-bit flat-panel-display links (vs DS90C383MTDX)
  • Operates up to an 85 MHz LVDS receiver clock (vs DS90CF364AMTD)
  • Reaches 2.38 Gbps maximum throughput in the DS90CF386 configuration (vs DS90C383MTDX)

Notes de conception

Route the LVDS clock and data pairs as controlled-impedance differential nets with matched spacing and a continuous reference plane. Keep the receiver close to the connector or interface boundary, avoid stubs, and use the manufacturer reference layout for pair geometry and termination. The 85 MHz clock rate and 595 Mbps-per-line data rate make return-path discontinuities and split-plane crossings important causes of data errors.

Separate the LVDS receiver from switching regulators, clock sources, and high-current outputs wherever the PCB area permits. Place bypass capacitors at the device power pins and provide a low-impedance ground connection beneath and around the TSSOP. Route parallel CMOS outputs away from sensitive analog circuitry and review their length against the receiving device’s timing requirements.

Do not treat every +3.3 V LVDS receiver as a direct substitute. A valid drop-in candidate must match the 56-pin DGG footprint, supply requirements, LVDS input definitions, clock range, data-width mapping, and control functions. Confirm the exact DS90CF386MTD pinout against the manufacturer datasheet before assigning PCB nets, especially when replacing a receiver from another display-interface family.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

Compliance status is not established by the listed product excerpts. Review current manufacturer product and material declarations for the exact ordering option.

Données vérifiées le : 2026-11-10 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

DS90CF386MTD datasheet DS90CF386MTD pinout DS90CF386MTD datasheet pdf DS90CF386MTD equivalent DS90CF386MTD replacement DS90CF386MTD vs DS90C383MTDX DS90CF386MTD vs DS90CF364AMTD DS90CF386MTD price DS90CF386MTD stock Texas Instruments DS90CF386MTD DS90CF386MTD 56-TSSOP DS90CF386MTD 85 MHz DS90CF386MTD application circuit DS90CF386MTD drop-in replacement

Composants & termes associés

Texas Instruments DS90CF386MTD DS90CF386 DS90C383MTDX DS90CF364AMTD LVDS receiver low-voltage differential signaling flat-panel-display link display interface IC interface IC semiconductor parallel CMOS output phase-locked clock clock recovery LVDS clock 85 MHz 595 Mbps 2.38 Gbps 24-bit interface 18-bit interface 56-pin TSSOP DGG package surface-mount package industrial display medical monitor display
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ