DS90CF386MTD - 3.3V 85MHz LVDS FPD Receiver | Texas Instruments
MPN: DS90CF386MTD ✓ 啟用中DS90CF386MTD 概覽
An LVDS receiver, or low-voltage differential-signaling receiver, is an interface circuit that detects small differential voltages across paired conductors and converts them into digital logic signals. LVDS belongs to the broader differential-data-interface and display-interface hierarchy, where it is used to reduce signal amplitude, improve noise immunity, and support reliable high-speed transmission over a compact printed-circuit-board connection. The DS90CF386 is therefore a display-link receiver rather than a general-purpose logic buffer or voltage regulator.
The receiver phase-locks to the incoming LVDS clock, samples the serial bit streams presented on the LVDS data lines, and produces parallel output data. According to the manufacturer product documentation, the receiver LVDS clock operates from 20 MHz to 85 MHz. At an incoming clock rate of 85 MHz, each LVDS input line operates at 595 Mbps, producing a maximum throughput of 2.38 Gbps for the DS90CF386 configuration.
The DS90CF386 family supports 24-bit and 18-bit flat panel display links and is intended for systems requiring parallel digital data delivery after LVDS deserialization. The 56-pin TSSOP package is surface mount and provides the package arrangement used by the DS90CF386MTD ordering option. The manufacturer lists a -10°C to +70°C operating-temperature range for this ordering option.
Typical applications include flat-panel LCD controller interfaces, digital display links, industrial display equipment, and other systems that transmit high-speed display data across a differential interface. The 85 MHz clock rate supports demanding pixel-data streams while the parallel output reduces the need for repeated high-speed differential reception downstream.
When designing the receiver, preserve controlled-impedance routing for the LVDS clock and data pairs, keep the receiver and transmitter ground references well connected, and place bypass and termination components according to the manufacturer reference layout. Confirm the exact pin assignments and signal names for the 56-pin DGG package in the manufacturer datasheet before assigning PCB nets.
This page combines the manufacturer’s interface description, package information, operating limits, and practical implementation guidance with a focused comparison of drop-in candidates. It is intended to help engineers identify the correct DS90CF386 ordering option, understand its LVDS throughput, and plan a compatible display-interface layout.
直接替換替代品,適用於 DS90CF386MTD — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: DS90CF386MTD (相同外形與佔位) — 差異在於 Package, Product Type, Supply Voltage.
DS90C383MTDX
✅ 直接替換聯絡詢價
查看資料表 →DS90CF364AMTD
✅ 直接替換📋 參考替代品(不在目錄中)
DS90CF386MTD 規格
| Product Type | LVDS flat-panel-display link receiver |
| 供應電壓 | +3.3 V |
| Maximum LVDS Clock Frequency | 85 MHz |
| Minimum LVDS Clock Frequency | 20 MHz |
| LVDS Bit Rate at 85 MHz Clock | 595 Mbps per LVDS input line |
| Maximum Throughput | 2.38 Gbps for DS90CF386 configuration |
| Supported Data Width | 24-bit or 18-bit |
| Clocking Method | Phase-locked to input LVDS clock |
| Output Interface | Parallel CMOS data |
| 封裝 | 56-pin TSSOP (DGG) |
| Package Type | Surface mount |
| 工作溫度 | -10°C to +70°C |
| 腳位數 | 56 pins |
| Manufacturer | Texas Instruments |
DS90CF386MTD surface mount 腳位配置指南
DS90CF386MTD(surface mount 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: DS90CF386MTD.
請參閱 資料表 以查看完整腳位配置。
典型應用
DS90CF386MTD 適用於 6 應用s: Flat-Panel LCD Display Interface, Industrial Display Controller Board, Digital Signage Display Module, Medical Monitor Display, Test and Measurement Front Panel, Video Processing Board.
Flat-Panel LCD Display Interface
The DS90CF386MTD fits a flat-panel LCD link in which a display transmitter serializes pixel data over differential LVDS pairs and the controller board requires parallel CMOS data. Its 20 MHz to 85 MHz LVDS clock range supports high-rate display traffic, while the 24-bit and 18-bit configurations align with common panel interface requirements. At 85 MHz, each LVDS line carries 595 Mbps and the DS90CF386 configuration reaches 2.38 Gbps maximum throughput. Place the receiver close to the display connector, route clock and data as controlled-impedance differential pairs, and use the manufacturer pin table to map the parallel outputs into the receiving controller.
推薦
Industrial Display Controller Board
DS90CF386MTD is appropriate for industrial display electronics that receive high-speed pixel data from a remote or mezzanine display module. The 56-pin TSSOP package provides a defined surface-mount footprint, while the receiver’s phase-locked clocking converts differential serial streams into parallel CMOS outputs for the controller. Its -10°C to +70°C listed operating range suits many indoor industrial environments, although the final system must confirm its own thermal requirements. Maintain a low-impedance ground plane and provide local bypass capacitance so display noise does not interfere with adjacent control or processing circuitry.
推薦
Digital Signage Display Module
The DS90CF386MTD can be used in digital signage systems where long internal cable or board interconnects carry LVDS display data to a panel controller. Differential signaling reduces sensitivity to common-mode noise compared with single-ended links, and the receiver’s 85 MHz maximum clock rate supports demanding video and control traffic. The design should use matched pair geometry, controlled impedance, and an uninterrupted ground reference between transmitter and receiver. Verify that the chosen panel’s serializer uses the supported 24-bit or 18-bit data organization and that the controller timing is compatible with the recovered clock.
推薦
Medical Monitor Display
DS90CF386MTD can support the display-data path of a medical monitor when the system architecture uses a +3.3 V LVDS transmitter and requires parallel data at the display controller. The receiver supports clock rates from 20 MHz to 85 MHz and converts the incoming serialized pixel data with phase-locked clock recovery. Medical equipment design must separately assess safety, isolation, EMC, and environmental requirements; the receiver’s interface role does not itself establish medical certification. In implementation, keep the LVDS pairs away from noisy switching nodes and use a stable reference plane to reduce the chance of data errors at the panel interface.
推薦
Test and Measurement Front Panel
DS90CF386MTD is useful in test and measurement equipment that receives high-resolution display information from a remote processing or graphics section. The LVDS receiver can accept a 24-bit or 18-bit display link at rates up to 85 MHz and provide parallel CMOS outputs to the display controller. This arrangement helps keep high-speed differential routing confined to a controlled board or cable interface. For laboratory equipment, decouple the receiver locally, provide uninterrupted return-current paths, and validate signal integrity with the actual display cable and connector because propagation loss and reflections depend on the complete channel.
推薦
Video Processing Board
The DS90CF386MTD fits a video processing board where an upstream serializer transmits parallel video data across a compact LVDS connection to a display or downstream processing block. Supporting up to 85 MHz clock operation, the receiver phase-locks to the incoming clock and recovers parallel data from the differential inputs. The 56-pin TSSOP arrangement can simplify assembly compared with larger fine-pitch alternatives. Confirm the exact data mapping, power requirements, and timing of the source serializer before layout, and route differential clock separately from noisy power-converter areas.
推薦
工程參考資料,適用於 DS90CF386MTD — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | DS90C383MTDX | DS90CF364AMTD |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 56-pin TSSOP (DGG) | 56-pin TSSOP | 56-pin TSSOP |
主要差異化特點
- Supports both 24-bit and 18-bit flat-panel-display links (對比DS90C383MTDX)
- Operates up to an 85 MHz LVDS receiver clock (對比DS90CF364AMTD)
- Reaches 2.38 Gbps maximum throughput in the DS90CF386 configuration (對比DS90C383MTDX)
設計說明
Route the LVDS clock and data pairs as controlled-impedance differential nets with matched spacing and a continuous reference plane. Keep the receiver close to the connector or interface boundary, avoid stubs, and use the manufacturer reference layout for pair geometry and termination. The 85 MHz clock rate and 595 Mbps-per-line data rate make return-path discontinuities and split-plane crossings important causes of data errors.
Separate the LVDS receiver from switching regulators, clock sources, and high-current outputs wherever the PCB area permits. Place bypass capacitors at the device power pins and provide a low-impedance ground connection beneath and around the TSSOP. Route parallel CMOS outputs away from sensitive analog circuitry and review their length against the receiving device’s timing requirements.
Do not treat every +3.3 V LVDS receiver as a direct substitute. A valid drop-in candidate must match the 56-pin DGG footprint, supply requirements, LVDS input definitions, clock range, data-width mapping, and control functions. Confirm the exact DS90CF386MTD pinout against the manufacturer datasheet before assigning PCB nets, especially when replacing a receiver from another display-interface family.
合規資訊
Compliance status is not established by the listed product excerpts. Review current manufacturer product and material declarations for the exact ordering option.