EFM32TG110F32-D-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs
Référence : EFM32TG110F32-D-QFN24 ✓ ActifEFM32TG110F32-D-QFN24 Présentation
A microcontroller is a programmable system-on-chip that integrates a CPU, memory, and peripherals such as GPIO, timers, communications interfaces, and analog blocks. The EFM32TG110 is specifically designed around the ARM Cortex-M3 processor. In the product hierarchy, Cortex-M3 is a 32-bit ARM processor core, while the EFM32TG110 is a low-power microcontroller, and the Tiny Gecko family is a Silicon Labs MCU product family intended for battery-operated and energy-sensitive equipment.
The EFM32TG110F32-D-QFN24 provides 32 KB of flash, 4 KB of RAM, 17 digital I/O pins, and two 16-bit timers according to the manufacturer product page. Its maximum CPU frequency is 32 MHz. The device also includes AES hardware and an operational amplifier, allowing security-oriented and analog signal-conditioning functions to be integrated without requiring separate components. Its 24-QFN package supports compact PCB layouts while providing substantial peripheral capability for its size.
The Tiny Gecko architecture emphasizes energy efficiency through low-power operating modes and short wake-up times. This architecture is useful when the controller must remain responsive while consuming little power between user events. Compared with a continuously active general-purpose processor, the EFM32TG110 can spend more time in an energy-saving state and resume processing rapidly when required. Firmware can therefore balance responsiveness against average current consumption in battery-powered systems.
Typical applications include low-power sensor nodes, wearable accessories, compact industrial controllers, connected accessories, and embedded instruments. The 32 KB flash capacity is suitable for moderate firmware workloads, while the 4 KB RAM supports control buffers and application state. The integrated AES block can accelerate compatible cryptographic operations, and the operational amplifier can reduce the component count in analog front ends when its operating limits suit the design.
Hardware implementation requires careful attention to the EFM32 power-domain connections. The manufacturer documentation states that AVDD_x, VDD_DREG, and IOVDD_x must be connected together at the PCB level, with an optional filter. Place these connections and their decoupling capacitors as directed by the manufacturer application note AN0002, EFM32 Hardware Design Considerations, and provide clean, properly sequenced supply paths for reliable operation.
This product overview combines the manufacturer specifications with practical guidance for low-power firmware, analog integration, secure data handling, and PCB implementation. It also supports direct comparison with pin-compatible Tiny Gecko options, helping engineers select a flash-memory capacity that matches the firmware and application requirements without changing the board footprint.
Alternatives de remplacement direct pour EFM32TG110F32-D-QFN24 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec EFM32TG110F32-D-QFN24 (même facteur de forme et même empreinte) — différant par Package, Flash Memory, Digital I/O Pins, RAM, Timers.
EFM32TG110F16-QFN24
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →EFM32TG110F8-QFN24
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →EFM32TG110F4-QFN24
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →EFM32TG110F32-D-QFN24 Valeurs maximales et caractéristiques électriques
| Manufacturer | Silicon Labs |
| Product Family | EFM32 Tiny Gecko |
| Processor Core | ARM Cortex-M3 |
| CPU Architecture | 32-bit |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 32 KB |
| RAM Memory | 4 KB |
| Digital I/O Pins | 17 |
| Timers | 2 × 16-bit |
| Security Accelerator | AES hardware |
| Analog Peripheral | Operational amplifier |
| Boîtier | 24-QFN, 5 mm × 5 mm |
| Type de montage | Surface mount |
| Core Count | 1 |
| Programmable I/O Count | 17 |
Guide de configuration des broches du EFM32TG110F32-D-QFN24 24-qfn, 5 mm × 5 mm
Configuration des broches du EFM32TG110F32-D-QFN24 (boîtier 24-qfn, 5 mm × 5 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour EFM32TG110F32-D-QFN24.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
EFM32TG110F32-D-QFN24 convient pour 6 applications: Battery-Powered Sensor Nodes, Low-Power Wearable Accessories, AES-Enabled Secure Embedded Controls, Compact Industrial Condition Monitoring, Connected Sensor and IoT Modules, Portable Test and Control Instruments.
Battery-Powered Sensor Nodes
The EFM32TG110F32-D-QFN24 suits compact, battery-powered sensor nodes that need responsive control without a continuously active processor. Its 32 MHz ARM Cortex-M3 core can handle sampling, filtering, and communications while the Tiny Gecko architecture uses energy-saving modes between events. The 32 KB flash accommodates application firmware and configuration data, while 4 KB RAM provides working space for sensor buffers and protocol state. Short wake-up behavior can reduce the period during which the MCU draws power. The 24-QFN 5 mm × 5 mm package also conserves board area compared with larger leaded controllers.
Recommandé
Low-Power Wearable Accessories
The EFM32TG110F32-D-QFN24 is appropriate for wearable accessories that combine local sensing with infrequent user interaction. Its 32 KB flash provides room for a more capable firmware image than the 16 KB and 8 KB Tiny Gecko variants, which is useful when the device includes data logging, button handling, and communication updates. The low-power platform permits extended sleep between activities, while the Cortex-M3 core wakes quickly enough to service the device. Its small 24-QFN package is suitable for space-constrained wearable electronics, subject to careful exposed-pad layout and power-domain routing.
Recommandé
AES-Enabled Secure Embedded Controls
The EFM32TG110F32-D-QFN24 is useful in embedded controls that require hardware-assisted AES operations without adding a separate cryptographic accelerator. The integrated AES block can accelerate compatible encryption and decryption workflows, allowing the 32 MHz Cortex-M3 core to concentrate on control logic and communications. Its 32 KB flash provides sufficient capacity for a moderate security-aware firmware image, and the integrated operational amplifier can support nearby analog conditioning. The resulting system can reduce board area and component count, provided the selected firmware library, key-handling method, and application security requirements are reviewed carefully.
Recommandé
Compact Industrial Condition Monitoring
The EFM32TG110F32-D-QFN24 can serve as the local controller in a compact industrial condition-monitoring module. Its 32 MHz processing capability supports real-time sampling, threshold evaluation, timer-based measurement, and event logging, while 4 KB RAM accommodates bounded buffers and operating state. The integrated operational amplifier may reduce the component count in suitable low-level signal-conditioning paths. Energy-saving modes are beneficial in installations with long idle periods between measurements. Industrial suitability still depends on the exact environmental ratings, supply range, and EMC performance required by the installation.
Recommandé
Connected Sensor and IoT Modules
The EFM32TG110F32-D-QFN24 fits connected sensor modules that need more firmware flexibility than the smallest Tiny Gecko variants. Its 32 KB flash can hold protocol handling, sensor drivers, diagnostics, and update logic, while the ARM Cortex-M3 core executes these tasks at up to 32 MHz. The 17 digital I/O pins support switches, indicators, and sensor selection. For a complete IoT design, the external radio or network interface remains a separate consideration, and the MCU should spend most of its time in an energy-saving state when radio traffic permits.
Recommandé
Portable Test and Control Instruments
The EFM32TG110F32-D-QFN24 is applicable to portable test and control instruments requiring a compact processor, local timing, and integrated analog support. Its two 16-bit timers support timing and measurement tasks, while the operational amplifier can assist with signal conditioning when the required amplitude, bandwidth, and common-mode conditions are suitable. The 32 KB flash and 4 KB RAM provide enough resources for a focused instrument firmware rather than a large application suite. A low-power operating strategy can extend run time, although the final accuracy and measurement performance depend on the complete analog signal chain.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour EFM32TG110F32-D-QFN24 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | EFM32TG110F16-QFN24 | EFM32TG110F8-QFN24 | EFM32TG110F4-QFN24 |
|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | QFN-24 (5 mm × 5 mm) | QFN-24 (5 mm × 5 mm) | QFN-24 (5 mm × 5 mm) | QFN-24 (5 mm × 5 mm) |
| Flash Memory | 32 KB | 16 KB | 8 KB | 4 KB |
Principaux différenciateurs
- Largest flash option among the identified Tiny Gecko QFN24 alternatives (vs EFM32TG110F16-QFN24)
- Four times the flash memory of the F8 alternative (vs EFM32TG110F8-QFN24)
- Maintains the full 17-pin digital I/O complement (vs EFM32TG110F8-QFN24)
- Higher RAM capacity than the F8 alternative (vs EFM32TG110F8-QFN24)
Notes de conception
Connect AVDD_x, VDD_DREG, and IOVDD_x together at the PCB level, with an optional filter as directed by the EFM32TG110 documentation. Use AN0002, EFM32 Hardware Design Considerations, for the recommended schematic and decoupling implementation. Keep the exposed-pad connection and supply-return paths compact so switching activity and analog loads do not create supply disturbance at the MCU pins.
Design the 24-QFN footprint from the manufacturer package drawing rather than treating it as a generic QFN. Confirm exposed-pad dimensions, thermal-via arrangement, paste pattern, and mask openings against the latest EFM32TG110 documentation. Place bypass capacitors close to their associated supply pins and preserve a low-resistance ground return beneath the device to reduce inductance during fast Cortex-M3 transitions.
Estimated firmware and RAM usage should be checked against the available 32 KB flash and 4 KB RAM, including stack, bootloader, update image, and diagnostic overhead. The EFM32TG110F16-QFN24 provides 16 KB flash and the F8 provides 8 KB, so a footprint-compatible substitution is only appropriate when the complete production build fits. Keep margin for security patches and future field updates.
Do not assume the operational amplifier can replace every external analog stage. Check its input range, output capability, bandwidth, noise, stability, and supply limits against the actual signal path. Likewise, use hardware AES only with an approved key-management and firmware strategy; the presence of an accelerator does not by itself define the security of the complete product.
Preserve clean separation between sensitive analog inputs, communication lines, and fast digital activity around the compact QFN footprint. Route high-current returns directly to the supply network rather than through narrow MCU traces. If the integrated operational amplifier is used near radio, sensor, or communications circuitry, evaluate its grounding and feedback layout to prevent switching noise from being coupled into the measured signal.
Informations de conformité
The manufacturer product page and device listing do not state the requested compliance statuses. AEC-Q100 status is shown as unknown because an industrial or automotive qualification was not identified.