EFM32WG330F64-QFN64 - 48MHz Cortex-M4F MCU | Silicon Labs
Référence : EFM32WG330F64-QFN64 ✓ ActifEFM32WG330F64-QFN64 Présentation
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces into one device. The EFM32 Wonder Gecko platform belongs to the broader 32-bit embedded-controller hierarchy, combining real-time processing with low-power operation. Its autonomous peripherals can perform selected tasks with limited CPU intervention, helping conserve energy in sensor, communications, and embedded-control products.
The EFM32WG330F64-QFN64 operates at up to 48 MHz and includes 64 KB of flash for firmware. Its Cortex-M4F core supports the full ARM DSP instruction set and hardware floating-point arithmetic, useful for filtering, control algorithms, and digital signal processing. The family is designed to consume as little as 0.65 µA in Stop mode and 211 µA/MHz in Run mode, according to the manufacturer datasheet.
Integration is a major technical advantage. On-chip analog and autonomous peripherals reduce the need for separate sensors, timers, and interface components, while dedicated hardware can continue selected operations during low-energy periods. The 1.98 V to 3.8 V operating range supports low-voltage embedded systems, although the final rail tolerance must include voltage, temperature, and transient effects.
Typical uses include wireless sensor nodes, connected industrial sensors, low-power monitoring equipment, consumer controls, and compact embedded-control platforms. The same 48 MHz Cortex-M4F architecture is also suitable for DSP-oriented routines that require deterministic execution without an external digital signal processor.
PCB design should preserve the manufacturer's recommended power, decoupling, clock, and exposed-pad arrangements in the 64-QFN footprint. Confirm the complete pin assignment and exposed thermal pad connection in the manufacturer datasheet before routing analog, oscillator, and high-current supply signals.
This page organizes the key operating specifications, qualified same-package alternatives, application guidance, and engineering considerations into one practical selection reference. It also highlights where flash capacity, peripheral sets, lifecycle status, and software migration requirements can affect replacement decisions.
Alternatives de remplacement direct pour EFM32WG330F64-QFN64 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
EFM32WG330F64-QFN64T
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
EFM32WG330F64-B-QFN64R
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
EFM32LG330F64G-F-QFN64
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
EFM32WG230F256-QFN64
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
EFM32WG330F256-QFN64
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
EFM32WG330F64-QFN64 Valeurs maximales et caractéristiques électriques
| Product Type | 32-bit ARM Cortex-M4F microcontroller |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 64 KB |
| Processor Core | ARM Cortex-M4F |
| Architecture | 32-bit |
| Supply Voltage Range | 1.98 V to 3.8 V |
| Boîtier | 64-QFN, 9 mm × 9 mm |
| Stop Mode Current | 0.65 µA |
| Run Mode Current | 211 µA/MHz |
| Floating-Point Unit | Yes |
| DSP Instruction Support | Yes, full ARM DSP instruction set |
| Autonomous Peripherals | Yes |
| Type de montage | Surface mount |
Guide de configuration des broches du EFM32WG330F64-QFN64 64-qfn, 9 mm × 9 mm
Configuration des broches du EFM32WG330F64-QFN64 (boîtier 64-qfn, 9 mm × 9 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour EFM32WG330F64-QFN64.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
EFM32WG330F64-QFN64 convient pour 6 applications: Low-Power Wireless Sensor Nodes, Industrial Monitoring and Control, Digital Signal Conditioning, Connected Consumer Controls, Portable Measurement Instruments, Battery-Powered IoT Endpoints.
Low-Power Wireless Sensor Nodes
The EFM32WG330F64-QFN64 fits wireless sensor nodes where battery life and compactness are more important than maximum flash capacity. Its 48 MHz ARM Cortex-M4F core handles protocol processing and local filtering, while the EFM32WG family's 0.65 µA Stop-mode current provides a strong foundation for duty-cycled operation. Autonomous peripherals can handle selected timing and analog functions without requiring the CPU to remain fully active. The 64-QFN 9 mm × 9 mm package also supports dense sensor assemblies. Before deployment, evaluate the complete radio, sensor, regulator, and sensor-board leakage budget rather than relying only on the microcontroller's specified low-power current.
Recommandé
Industrial Monitoring and Control
The EFM32WG330F64-QFN64 is suitable for industrial monitoring modules that combine sensor acquisition, local control, and low-power communication. Its Cortex-M4F processor provides DSP instructions and hardware floating-point arithmetic for filtering and compensation calculations, while 64 KB of flash can hold control, communication, and diagnostic firmware. The 1.98 V to 3.8 V operating range supports low-voltage system architectures. For an industrial design, verify the exact analog specifications, watchdog behavior, operating-temperature limits, and EMC requirements against the manufacturer datasheet. Software should include brownout handling, fault-safe outputs, and communication recovery routines because those product-level behaviors are not established by the processor specification alone.
Recommandé
Digital Signal Conditioning
The EFM32WG330F64-QFN64 can perform local digital signal conditioning when a sensor produces a stream requiring filtering, scaling, or spectral processing. The 48 MHz Cortex-M4F core implements the full ARM DSP instruction set and includes a hardware floating-point unit, reducing the computational overhead of floating-point routines. Firmware can execute inside the MCU while an autonomous peripheral manages a capture or timing function, helping lower active-processing time. The 64 KB flash limit must be checked against algorithm tables, control code, and update requirements. Benchmark the intended algorithm under worst-case interrupt and communication loads, and keep cache, memory, and peripheral configuration assumptions out of the functional safety case.
Recommandé
Connected Consumer Controls
The EFM32WG330F64-QFN64 can serve as the control hub in compact connected products such as smart controls, wearables, and battery-powered accessories. Its 32-bit Cortex-M4F core provides more computation than a basic control device while the 64-QFN package preserves a compact board footprint. Low-energy operating modes support product concepts that spend most of their time idle, and the device's digital peripherals can support communications and user-interface functions. Product developers should partition tasks so the CPU sleeps whenever peripheral events can be handled in hardware. Confirm the available GPIO, timers, serial interfaces, and radio interface options in the exact datasheet, because peripheral availability determines how much external circuitry the finished product needs.
Recommandé
Portable Measurement Instruments
The EFM32WG330F64-QFN64 is appropriate for portable measurement instruments that need local computation, low standby consumption, and a compact controller package. The hardware floating-point unit and DSP instruction support can accelerate calibration, filtering, and numeric conversion routines, while Stop-mode current down to 0.65 µA helps conserve battery energy between measurements. The 1.98 V to 3.8 V supply range permits integration with low-voltage analog and communication sections when their voltage requirements overlap. Analog front-end design remains the critical path: verify ADC performance, input limits, reference requirements, and exposed-pad grounding directly from the manufacturer documentation before choosing passive values or amplifier topologies.
Recommandé
Battery-Powered IoT Endpoints
The EFM32WG330F64-QFN64 supports battery-powered IoT endpoints that periodically acquire information, process it locally, and communicate through an attached radio or network module. The 48 MHz Cortex-M4F core provides deterministic performance for protocol framing and application logic, while the family's 211 µA/MHz Run-mode figure helps quantify the active-energy budget. Autonomous peripherals can reduce CPU involvement in time-based and analog operations. A practical power calculation must include sensor standby current, radio transmission peaks, regulator efficiency, capacitor leakage, and board contamination. Use a long sleep interval where the application permits, and confirm that every peripheral is placed in its intended low-energy state before the system is considered ready for sleep.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour EFM32WG330F64-QFN64 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | EFM32WG330F64-QFN64T | EFM32WG330F64-B-QFN64R | EFM32LG330F64G-F-QFN64 | EFM32WG230F256-QFN64 | EFM32WG330F256-QFN64 |
|---|---|---|---|---|---|---|
| Package | 64-QFN (9 mm × 9 mm) | 64-QFN (9 mm × 9 mm) | 64-QFN (9 mm × 9 mm) | 64-QFN (9 mm × 9 mm) | 64-QFN (9 mm × 9 mm) | 64-QFN (9 mm × 9 mm) |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Flash Memory | 64 KB | 64 KB | 64 KB | 64 KB | 256 KB | 256 KB |
| Product Family | EFM32 Wonder Gecko | EFM32 Wonder Gecko | EFM32 Wonder Gecko | EFM32 LowPower Gecko | EFM32 Wonder Gecko | EFM32 Wonder Gecko |
Principaux différenciateurs
- Matches the target processor and memory configuration while offering a documented reel order code (vs EFM32WG330F64-QFN64T)
- Provides four times the flash for firmware expansion (vs EFM32WG330F256-QFN64)
- Retains the core CPU architecture with a different low-power family focus (vs EFM32LG330F64G-F-QFN64)
- Avoids the flash-capacity change present in the higher-memory family option (vs EFM32WG230F256-QFN64)
Notes de conception
Budget the complete power profile rather than the processor current alone. The family specification cites 211 µA/MHz in Run mode and 0.65 µA in Stop mode, but the final design also includes sensor standby current, radio peaks, regulator quiescent current, capacitor leakage, and board contamination. Measure the average and peak demand at the MCU rail because a transient droop can change clock behavior or cause a reset even when the nominal supply voltage remains within 1.98 V to 3.8 V.
Use the manufacturer-recommended QFN land pattern, exposed-pad connection, and decoupling arrangement exactly. Place supply and ground-plane connections to minimize loop area, and follow the pin-definition table for analog, oscillator, debug, and reset functions. The 64-QFN package is compact, so assembly stencil design, solder-paste volume, pad thermal coupling, and reflow-profile control can materially affect yield and long-term thermal performance.
Do not substitute a higher-flash family member solely because it uses the same 64-QFN outline. EFM32WG330F256-QFN64 provides four times the flash of the target, while EFM32LG330F64G-F-QFN64 belongs to a different low-power family. Verify peripheral availability, interrupt mapping, memory organization, startup files, bootloader behavior, clock-tree details, and exposed-pad requirements before treating either device as a production replacement.
Keep clocks and sensitive analog inputs away from fast digital return paths, and provide short ground returns for every decoupling capacitor. If an external crystal is used, follow the manufacturer's recommended load-capacitance and layout guidance closely. Unused inputs should be terminated according to the device recommendations rather than left floating, and debug or programming interfaces should be arranged so test fixtures do not force extra loads onto sensitive pins.
Estimate junction heating from actual processor dissipation rather than package size alone. Estimated: use measured core voltage, core current, and the 211 µA/MHz family figure to calculate average active power, then add I/O and peripheral dissipation before comparing it with the package thermal data. Because the required thermal characterization values are not stated here, confirm junction and ambient limits, exposed-pad construction, and copper area in the manufacturer documentation before defining the maximum operating temperature.
Informations de conformité
The device information does not include explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. These fields remain unknown rather than being inferred from the manufacturer name or package type.