Silicon Labs

EFM32WG330F64-QFN64 - 48MHz Cortex-M4F MCU | Silicon Labs

MPN: EFM32WG330F64-QFN64 ✓ Active
1.98 V to 3.8 V Vdss 0.65 µA Id 64-QFN, 9 mm × 9 mm Package 48 MHz Speed 64 KB Memory
MOQ: 1 |

EFM32WG330F64-QFN64 Overview

Silicon Labs EFM32WG330F64-QFN64 is a 32-bit ARM Cortex-M4F Wonder Gecko microcontroller operating up to 48 MHz, with 64 KB of flash memory and a 64-QFN 9 mm × 9 mm package. It accepts a 1.98 V to 3.8 V supply and combines a floating-point unit, DSP instructions, autonomous peripherals, and energy-saving modes for compact embedded systems.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces into one device. The EFM32 Wonder Gecko platform belongs to the broader 32-bit embedded-controller hierarchy, combining real-time processing with low-power operation. Its autonomous peripherals can perform selected tasks with limited CPU intervention, helping conserve energy in sensor, communications, and embedded-control products.

The EFM32WG330F64-QFN64 operates at up to 48 MHz and includes 64 KB of flash for firmware. Its Cortex-M4F core supports the full ARM DSP instruction set and hardware floating-point arithmetic, useful for filtering, control algorithms, and digital signal processing. The family is designed to consume as little as 0.65 µA in Stop mode and 211 µA/MHz in Run mode, according to the manufacturer datasheet.

Integration is a major technical advantage. On-chip analog and autonomous peripherals reduce the need for separate sensors, timers, and interface components, while dedicated hardware can continue selected operations during low-energy periods. The 1.98 V to 3.8 V operating range supports low-voltage embedded systems, although the final rail tolerance must include voltage, temperature, and transient effects.

Typical uses include wireless sensor nodes, connected industrial sensors, low-power monitoring equipment, consumer controls, and compact embedded-control platforms. The same 48 MHz Cortex-M4F architecture is also suitable for DSP-oriented routines that require deterministic execution without an external digital signal processor.

PCB design should preserve the manufacturer's recommended power, decoupling, clock, and exposed-pad arrangements in the 64-QFN footprint. Confirm the complete pin assignment and exposed thermal pad connection in the manufacturer datasheet before routing analog, oscillator, and high-current supply signals.

This page organizes the key operating specifications, qualified same-package alternatives, application guidance, and engineering considerations into one practical selection reference. It also highlights where flash capacity, peripheral sets, lifecycle status, and software migration requirements can affect replacement decisions.

Drop-in alternatives for EFM32WG330F64-QFN64 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

EFM32WG330F64-QFN64T

✅ Drop-In
📦 64-QFN (9 mm × 9 mm)
Same 64 KB flash, 48 MHz Cortex-M4F, and 64-QFN footprint; the listed distinction is the T tape-and-reel order notation

📋 Reference alternative (not in catalog)

EFM32WG330F64-B-QFN64R

✅ Drop-In
📦 64-QFN (9 mm × 9 mm)
Same 64 KB flash and 64-QFN footprint; order-code suffix differs, while the -R listing identifies reel packing

📋 Reference alternative (not in catalog)

EFM32LG330F64G-F-QFN64

✅ Drop-In
📦 64-QFN (9 mm × 9 mm)
Uses the LowPower Gecko family with a 64-KB naming basis and 64-QFN footprint; peripheral and power-management details require validation against the target

📋 Reference alternative (not in catalog)

EFM32WG230F256-QFN64

✅ Drop-In
📦 64-QFN (9 mm × 9 mm)
Flash increases from 64 KB to 256 KB, a 192 KB difference, while retaining the 64-QFN family footprint; lifecycle and peripheral parity require review

📋 Reference alternative (not in catalog)

EFM32WG330F256-QFN64

✅ Drop-In
📦 64-QFN (9 mm × 9 mm)
Flash increases from 64 KB to 256 KB, a 192 KB difference, while the device retains the EFM32WG330 family and 48 MHz Cortex-M4F architecture

📋 Reference alternative (not in catalog)

EFM32WG330F64-QFN64 Maximum Ratings & Electrical Characteristics

Product Type 32-bit ARM Cortex-M4F microcontroller
Maximum CPU Frequency 48 MHz
Flash Memory 64 KB
Processor Core ARM Cortex-M4F
Architecture 32-bit
Supply Voltage Range 1.98 V to 3.8 V
Package 64-QFN, 9 mm × 9 mm
Stop Mode Current 0.65 µA
Run Mode Current 211 µA/MHz
Floating-Point Unit Yes
DSP Instruction Support Yes, full ARM DSP instruction set
Autonomous Peripherals Yes
Mounting Type Surface mount

EFM32WG330F64-QFN64 64-qfn, 9 mm × 9 mm Pin Configuration Guide

Pin configuration for EFM32WG330F64-QFN64 (64-qfn, 9 mm × 9 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

64-qfn, 9 mm × 9 mm package pinout diagram for EFM32WG330F64-QFN64

No detailed pinout data available for EFM32WG330F64-QFN64.

Refer to the datasheet for full pin configuration.

Typical Applications

EFM32WG330F64-QFN64 is suitable for 6 applications: Low-Power Wireless Sensor Nodes, Industrial Monitoring and Control, Digital Signal Conditioning, Connected Consumer Controls, Portable Measurement Instruments, Battery-Powered IoT Endpoints.

🧩

Low-Power Wireless Sensor Nodes

The EFM32WG330F64-QFN64 fits wireless sensor nodes where battery life and compactness are more important than maximum flash capacity. Its 48 MHz ARM Cortex-M4F core handles protocol processing and local filtering, while the EFM32WG family's 0.65 µA Stop-mode current provides a strong foundation for duty-cycled operation. Autonomous peripherals can handle selected timing and analog functions without requiring the CPU to remain fully active. The 64-QFN 9 mm × 9 mm package also supports dense sensor assemblies. Before deployment, evaluate the complete radio, sensor, regulator, and sensor-board leakage budget rather than relying only on the microcontroller's specified low-power current.

🏭

Industrial Monitoring and Control

The EFM32WG330F64-QFN64 is suitable for industrial monitoring modules that combine sensor acquisition, local control, and low-power communication. Its Cortex-M4F processor provides DSP instructions and hardware floating-point arithmetic for filtering and compensation calculations, while 64 KB of flash can hold control, communication, and diagnostic firmware. The 1.98 V to 3.8 V operating range supports low-voltage system architectures. For an industrial design, verify the exact analog specifications, watchdog behavior, operating-temperature limits, and EMC requirements against the manufacturer datasheet. Software should include brownout handling, fault-safe outputs, and communication recovery routines because those product-level behaviors are not established by the processor specification alone.

📡

Digital Signal Conditioning

The EFM32WG330F64-QFN64 can perform local digital signal conditioning when a sensor produces a stream requiring filtering, scaling, or spectral processing. The 48 MHz Cortex-M4F core implements the full ARM DSP instruction set and includes a hardware floating-point unit, reducing the computational overhead of floating-point routines. Firmware can execute inside the MCU while an autonomous peripheral manages a capture or timing function, helping lower active-processing time. The 64 KB flash limit must be checked against algorithm tables, control code, and update requirements. Benchmark the intended algorithm under worst-case interrupt and communication loads, and keep cache, memory, and peripheral configuration assumptions out of the functional safety case.

📱

Connected Consumer Controls

The EFM32WG330F64-QFN64 can serve as the control hub in compact connected products such as smart controls, wearables, and battery-powered accessories. Its 32-bit Cortex-M4F core provides more computation than a basic control device while the 64-QFN package preserves a compact board footprint. Low-energy operating modes support product concepts that spend most of their time idle, and the device's digital peripherals can support communications and user-interface functions. Product developers should partition tasks so the CPU sleeps whenever peripheral events can be handled in hardware. Confirm the available GPIO, timers, serial interfaces, and radio interface options in the exact datasheet, because peripheral availability determines how much external circuitry the finished product needs.

🔧

Portable Measurement Instruments

The EFM32WG330F64-QFN64 is appropriate for portable measurement instruments that need local computation, low standby consumption, and a compact controller package. The hardware floating-point unit and DSP instruction support can accelerate calibration, filtering, and numeric conversion routines, while Stop-mode current down to 0.65 µA helps conserve battery energy between measurements. The 1.98 V to 3.8 V supply range permits integration with low-voltage analog and communication sections when their voltage requirements overlap. Analog front-end design remains the critical path: verify ADC performance, input limits, reference requirements, and exposed-pad grounding directly from the manufacturer documentation before choosing passive values or amplifier topologies.

⚡

Battery-Powered IoT Endpoints

The EFM32WG330F64-QFN64 supports battery-powered IoT endpoints that periodically acquire information, process it locally, and communicate through an attached radio or network module. The 48 MHz Cortex-M4F core provides deterministic performance for protocol framing and application logic, while the family's 211 µA/MHz Run-mode figure helps quantify the active-energy budget. Autonomous peripherals can reduce CPU involvement in time-based and analog operations. A practical power calculation must include sensor standby current, radio transmission peaks, regulator efficiency, capacitor leakage, and board contamination. Use a long sleep interval where the application permits, and confirm that every peripheral is placed in its intended low-energy state before the system is considered ready for sleep.

Recommended Products Summary

EFM32WG330F64-QFN64T Tape-and-reel ordering counterpart Used in: Low-Power Wireless Sensor Nodes, Industrial Monitoring and Control, Connected Consumer Controls, Portable Measurement Instruments EFM32WG330F256-QFN64 Higher-flash family option for expanded firmware Used in: Low-Power Wireless Sensor Nodes, Digital Signal Conditioning, Connected Consumer Controls, Portable Measurement Instruments EFM32LG330F64G-F-QFN64 Low-power family option for embedded monitoring Used in: Industrial Monitoring and Control, Battery-Powered IoT Endpoints EFM32WG330F64-B-QFN64R Same-footprint reel-packed counterpart Used in: Digital Signal Conditioning, Battery-Powered IoT Endpoints
What are the key specifications of EFM32WG330F64-QFN64?
The EFM32WG330F64-QFN64 is a 48 MHz, 32-bit ARM Cortex-M4F microcontroller with 64 KB of flash memory, a hardware floating-point unit, and a 64-QFN 9 mm × 9 mm package. According to the Silicon Labs EFM32WG datasheet, the device also provides full DSP instruction support, autonomous peripherals, 0.65 µA Stop-mode current, and 211 µA/MHz Run-mode current. Its specified supply range is 1.98 V to 3.8 V, making it appropriate for compact low-power embedded systems.
Where can I download the EFM32WG330F64-QFN64 datasheet PDF?
The official EFM32WG datasheet PDF is available from Silicon Labs at https://www.silabs.com/documents/public/data-sheets/efm32wg-datasheet.pdf. It contains the family-level electrical characteristics, low-power behavior, peripheral descriptions, package information, and ordering information. For final board construction, also use the pin-description table and recommended schematic layout in that document to confirm every signal, exposed-pad connection, and decoupling requirement for the exact EFM32WG330F64-QFN64 order code.
Where can I find the EFM32WG330F64-QFN64 pinout?
The EFM32WG330F64-QFN64 pinout is found in the package and pin-definition sections of the Silicon Labs EFM32WG datasheet. The device uses a 64-QFN package measuring 9 mm × 9 mm, so all 64 terminals plus the exposed pad must be checked against the mechanical drawing. Use the manufacturer pin-description table rather than relying on a generic QFN footprint, because exposed-pad, ground, supply, and analog-pin assignments are device-specific.
Is EFM32WG330F64-QFN64 suitable for low-power sensor applications?
Yes, the EFM32WG330F64-QFN64 is suitable for low-power sensor applications because the EFM32WG family supports Stop-mode current down to 0.65 µA and Run-mode consumption of 211 µA/MHz. Its autonomous peripherals can reduce the need for continuous CPU intervention. Actual product-level consumption depends on the selected peripherals, sensor interface, duty cycle, regulator efficiency, and board leakage, so measure the complete operating profile in the final design.
Can the EFM32WG330F64-QFN64 perform digital signal processing?
The EFM32WG330F64-QFN64 can perform digital signal processing because its ARM Cortex-M4F core includes the full DSP instruction set and hardware floating-point unit. It runs at up to 48 MHz and provides 64 KB of flash for firmware. These resources suit digital filtering, signal conditioning, and control calculations, although real-time performance must be assessed with the final algorithm, memory configuration, interrupt rate, and peripheral workload.
What supply voltage does EFM32WG330F64-QFN64 require?
The EFM32WG330F64-QFN64 operates from a 1.98 V to 3.8 V supply. According to the manufacturer datasheet, this range supports direct operation from suitable low-voltage rails without requiring a separate high-voltage regulator. The design must remain within the limits for every voltage, temperature, and operating mode, while accounting for startup transients and the voltage drop across any series resistance or diode in the power path.
What is the best drop-in replacement for EFM32WG330F64-QFN64?
The EFM32WG330F64-QFN64T is the closest identified same-package option because it retains the EFM32WG330F64 device and 64-QFN footprint, with T indicating the listed tape-and-reel ordering form. A true drop-in decision still requires confirming pin definitions, exposed-pad treatment, flash programming, clock configuration, and firmware compatibility. Because this distinction primarily concerns packaging notation, it is not a different functional device variant.
Can EFM32WG330F64-QFN64T replace EFM32WG330F64-QFN64?
The EFM32WG330F64-QFN64T can normally serve as the packaging-matched counterpart to the EFM32WG330F64-QFN64 when the PCB uses the 64-QFN footprint and the original order code differs only by reel or packing notation. Verify the manufacturer ordering table for moisture-sensitive handling, tape orientation, and quantity per reel. The target and the T-listed device both identify 64 KB flash and a 48 MHz Cortex-M4F MCU.
When should I choose EFM32WG330F64-QFN64 over a higher-flash EFM32WG330F256-QFN64?
Choose EFM32WG330F64-QFN64 when 64 KB of flash is sufficient and minimizing memory cost or board resource use matters. Choose EFM32WG330F256-QFN64 when firmware, boot code, diagnostics, or application data require the larger 256 KB memory configuration. Both devices share the EFM32WG330 family and 64-QFN mechanical format, but the larger-flash device should not be treated as an exact functional substitute without reviewing memory, peripheral, lifecycle, and software assumptions.
Is EFM32WG330F64-QFN64 the same as EFM32WG330F64-QFN64T?
The EFM32WG330F64-QFN64 and EFM32WG330F64-QFN64T refer to the same 48 MHz Cortex-M4F, 64 KB-flash MCU in a 64-QFN package, with the T-listed order code using a tape-and-reel packing convention. They are therefore closely related ordering variants rather than different processor designs. Confirm the reel quantity, orientation, and moisture-handling requirements against the Silicon Labs ordering information before substituting one order code for the other.
What can replace EFM32WG330F64-QFN64 in an existing design?
The closest identified replacement is EFM32WG330F64-QFN64T because it retains the same EFM32WG330F64 function and 64-QFN footprint. For a redesign, EFM32WG330F256-QFN64 is another same-family candidate with more flash, but it is not automatically a drop-in substitute because software capacity and device-specific functions must be revalidated. Check the datasheet pin table, peripheral availability, clocking, memory map, bootloader behavior, and package land pattern before production substitution.
EFM32WG330F64-QFN64 vs EFM32WG330F256-QFN64 — which is better for firmware-heavy applications?
EFM32WG330F256-QFN64 is generally the better starting point for firmware-heavy applications because it provides 256 KB of flash rather than the target's 64 KB. The EFM32WG330F64-QFN64 is more appropriate when the deployed firmware comfortably fits 64 KB and lower memory usage is valuable. Both operate at up to 48 MHz in the 64-QFN family format, but memory headroom, application size, lifecycle, and peripheral differences should determine the final choice.
Where can I buy EFM32WG330F64-QFN64 online?
Use the Request a Quote form on this page to request EFM32WG330F64-QFN64 availability, lead time, and order handling from XAIPART. The exact listing identifies the part as a Silicon Labs 64-QFN, 48 MHz, 64 KB-flash microcontroller. A responsible purchase should also confirm the manufacturer order code, reel or tray packaging, moisture-sensitivity requirements, and lifecycle status at the time of quotation.
What is the price of EFM32WG330F64-QFN64?
Pricing for EFM32WG330F64-QFN64 is handled through the Request a Quote form on this page. The structured product record intentionally does not reproduce distributor pricing because market prices, quantities, currency, and inventory can change independently of the technical data. Submit the required quantity, package form, and target delivery location so the current commercial terms can be returned for the exact order code.
What is the lead time for EFM32WG330F64-QFN64?
The current lead time for EFM32WG330F64-QFN64 should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, tape-and-reel or other packing requirements, component availability, and production scheduling. Include your annual usage and forecast with the request when possible, and request written confirmation of the lifecycle status and delivery schedule before committing the design to volume production.
Is EFM32WG330F64-QFN64 in stock?
Current inventory for EFM32WG330F64-QFN64 is confirmed through the Request a Quote form on this page rather than through a static stock label. The manufacturer and distributor listings identify the device, but stock can change rapidly by package form and quantity. State the required reel quantity and target date in the request, and verify allocation and any permissible date-code or traceability conditions before placing the order.

Engineering reference data for EFM32WG330F64-QFN64 — comparison, design guidance, and compliance information.

Selection Guide

Choose EFM32WG330F64-QFN64 when a 48 MHz Cortex-M4F system needs 64 KB of flash, low-power operation, and a compact 64-QFN footprint. EFM32WG330F64-QFN64T is the closest production option when the same electrical device and package are required with tape-and-reel ordering notation; EFM32WG330F64-B-QFN64R offers another same-footprint order-code form for which reel details should be checked. Consider EFM32WG330F256-QFN64 when the application needs substantially more firmware space, but revalidate peripherals, lifecycle, and software because it has 256 KB rather than 64 KB of flash. EFM32LG330F64G-F-QFN64 belongs to the LowPower Gecko family and should be selected only after comparing the complete peripheral set and power-management behavior. EFM32WG230F256-QFN64 combines the same package with 256 KB of flash but is identified as end-of-life, making it unsuitable as a new-production choice without an explicit lifecycle exception. For every candidate, confirm the complete 64-terminal pin map, exposed-pad connection, voltage limits, firmware compatibility, and package drawings before releasing production artwork.

Comparison with Alternatives

Parameter This Product EFM32WG330F64-QFN64T EFM32WG330F64-B-QFN64R EFM32LG330F64G-F-QFN64 EFM32WG230F256-QFN64 EFM32WG330F256-QFN64
Package 64-QFN (9 mm × 9 mm) 64-QFN (9 mm × 9 mm) 64-QFN (9 mm × 9 mm) 64-QFN (9 mm × 9 mm) 64-QFN (9 mm × 9 mm) 64-QFN (9 mm × 9 mm)
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Flash Memory 64 KB 64 KB 64 KB 64 KB 256 KB 256 KB
Product Family EFM32 Wonder Gecko EFM32 Wonder Gecko EFM32 Wonder Gecko EFM32 LowPower Gecko EFM32 Wonder Gecko EFM32 Wonder Gecko

Key Differentiators

  • Matches the target processor and memory configuration while offering a documented reel order code (vs EFM32WG330F64-QFN64T)
  • Provides four times the flash for firmware expansion (vs EFM32WG330F256-QFN64)
  • Retains the core CPU architecture with a different low-power family focus (vs EFM32LG330F64G-F-QFN64)
  • Avoids the flash-capacity change present in the higher-memory family option (vs EFM32WG230F256-QFN64)

Design Notes

Budget the complete power profile rather than the processor current alone. The family specification cites 211 µA/MHz in Run mode and 0.65 µA in Stop mode, but the final design also includes sensor standby current, radio peaks, regulator quiescent current, capacitor leakage, and board contamination. Measure the average and peak demand at the MCU rail because a transient droop can change clock behavior or cause a reset even when the nominal supply voltage remains within 1.98 V to 3.8 V.

Use the manufacturer-recommended QFN land pattern, exposed-pad connection, and decoupling arrangement exactly. Place supply and ground-plane connections to minimize loop area, and follow the pin-definition table for analog, oscillator, debug, and reset functions. The 64-QFN package is compact, so assembly stencil design, solder-paste volume, pad thermal coupling, and reflow-profile control can materially affect yield and long-term thermal performance.

Do not substitute a higher-flash family member solely because it uses the same 64-QFN outline. EFM32WG330F256-QFN64 provides four times the flash of the target, while EFM32LG330F64G-F-QFN64 belongs to a different low-power family. Verify peripheral availability, interrupt mapping, memory organization, startup files, bootloader behavior, clock-tree details, and exposed-pad requirements before treating either device as a production replacement.

Keep clocks and sensitive analog inputs away from fast digital return paths, and provide short ground returns for every decoupling capacitor. If an external crystal is used, follow the manufacturer's recommended load-capacitance and layout guidance closely. Unused inputs should be terminated according to the device recommendations rather than left floating, and debug or programming interfaces should be arranged so test fixtures do not force extra loads onto sensitive pins.

Estimate junction heating from actual processor dissipation rather than package size alone. Estimated: use measured core voltage, core current, and the 211 µA/MHz family figure to calculate average active power, then add I/O and peripheral dissipation before comparing it with the package thermal data. Because the required thermal characterization values are not stated here, confirm junction and ambient limits, exposed-pad construction, and copper area in the manufacturer documentation before defining the maximum operating temperature.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The device information does not include explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. These fields remain unknown rather than being inferred from the manufacturer name or package type.

Related Searches

EFM32WG330F64-QFN64 datasheet EFM32WG330F64-QFN64 specifications EFM32WG330F64-QFN64 pinout EFM32WG330F64-QFN64 datasheet pdf EFM32WG330F64-QFN64 price EFM32WG330F64-QFN64 stock Silicon Labs EFM32WG330F64-QFN64 EFM32WG330F64-QFN64 equivalent EFM32WG330F64-QFN64 replacement EFM32WG330F64-QFN64 footprint EFM32WG330F64-QFN64 schematic EFM32WG330F64-QFN64 vs EFM32WG330F256-QFN64 64 QFN Cortex-M4F microcontroller 48 MHz Cortex-M4F low power MCU

Related Components & Terms

Silicon Labs EFM32WG330F64-QFN64 EFM32WG330F64-QFN64T EFM32WG330F64-B-QFN64R EFM32LG330F64G-F-QFN64 EFM32WG230F256-QFN64 EFM32WG330F256-QFN64 ARM Cortex-M4F microcontroller MCU 32-bit microcontroller Wonder Gecko LowPower Gecko embedded microcontroller semiconductor 64-QFN QFN package family surface-mount package SMD floating-point unit FPU DSP instruction set autonomous peripherals Stop mode Run mode low-power embedded control IoT sensor node industrial monitoring digital signal processing
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details