EP20K400EFC672-2 - 400K Gates APEX 20KE FPGA | Intel / Altera
Référence : EP20K400EFC672-2 ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $145 | $145,00 |
| 10 | $132 | $1 320,00 |
| 100 | $118.5 | $11 850,00 |
| 500 | $105 | $52 500,00 |
| 1 000 | $92.75 | $92 750,00 |
EP20K400EFC672-2 Présentation
An FPGA (Field Programmable Gate Array) is a type of programmable logic device (PLD) that allows engineers to implement custom digital circuits by configuring an array of configurable logic blocks (CLBs), interconnect, and I/O cells after manufacturing. FPGAs sit hierarchically between simple programmable logic (CPLDs) and fixed-function ASICs, offering higher logic density than CPLDs but lower per-unit cost than full ASICs at low volumes. APEX 20KE devices extend the original APEX 20K family by adding MultiCore interconnect and embedded memory, occupying the high-density tier within Altera's programmable logic portfolio at the time of release.
Key features of the EP20K400EFC672-2 include 212,992 bits of embedded RAM, 488 maximum user I/Os, a 1.8V core supply with 2.5V tolerant I/O support, and a commercial operating temperature range of 0C to 85C. The FC-FBGA-672 package provides a 1.0 mm ball pitch, supporting high-pin-count designs with controlled impedance signal integrity. The device supports in-system programmability via JTAG and configuration via serial or parallel PROM interfaces, and was widely used in designs that required rapid prototyping before ASIC conversion.
The APEX 20KE architecture integrates four types of logic structures: LUTs for register-intensive datapaths, product-term logic for control state machines, ESBs that can act as dual-port RAM, ROM, or CAM, and a high-bandwidth MultiCore interconnect that ties the structures together. This heterogeneous fabric allowed designers to place LUT-based and product-term logic in the same device without sacrificing utilization, an advantage over pure LUT-based FPGAs of that generation.
Typical applications for the EP20K400EFC672-2 include telecommunications line cards, baseband processing in early 3G infrastructure, networking switches and routers, custom DSP pipelines, and PCI bus interface bridging. The high I/O count and embedded memory made it well-suited for packet processing engines and protocol conversion functions where multiple parallel interfaces had to be absorbed on a single device.
When designing with this device, engineers should note that APEX 20KE parts have reached end-of-life status from Intel/Altera, and new designs should target Cyclone, Arria, or Stratix families. Existing designs should consider lifetime-buy planning and verify that the Quartus II design software version (13.0 SP1 or earlier for APEX support) is still available in the engineer's design flow.
This page synthesizes distributor pricing, lifecycle status, drop-in alternatives from the same APEX 20KE family, and practical design notes that complement the official APEX 20KE datasheet from Altera. All specifications are cross-referenced against DigiKey, Mouser, and Octopart listings as of 2026-09-08.
Alternatives de remplacement direct pour EP20K400EFC672-2 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec EP20K400EFC672-2 (même facteur de forme et même empreinte) — différant par Operating Temperature, Process Technology, Package, Family, Series.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
EP20K400EFC672-2N
✅ Remplacement direct✓ En stock
$171 / unité
Voir la fiche technique →EP20K400EFC672-2X
✅ Remplacement direct✓ En stock
$118.9 / unité
Voir la fiche technique →EP20K400EFC672-1XN
✅ Remplacement direct✓ En stock
$215 / unité
Voir la fiche technique →EP20K400EFC672-1N
✅ Remplacement direct✓ En stock
$175 / unité
Voir la fiche technique →EP20K400EFC672-1
✅ Remplacement direct✓ En stock
$110 / unité
Voir la fiche technique →EP20K400EFC672-2 Valeurs maximales et caractéristiques électriques
| Family | APEX 20KE |
| Logic Elements / Cells | 16640 |
| Total RAM Bits | 212992 |
| Number of I/O | 488 |
| Number of Logic Gates | 400000 |
| Core Voltage | 1.8 V |
| Propagation Delay | 2.5 ns |
| Température de fonctionnement | 0 C to 85 C |
| Package Type | FC-FBGA |
| Package Pin Count | 672 |
| Type de montage | Surface Mount |
| Logic Family | CMOS |
| Process Technology | 0.22 um |
Configuration des broches de EP20K400EFC672-2
| Broche A1 | I/O — General-purpose user I/O ball |
| Broche A2 | I/O — General-purpose user I/O ball |
| Broche A3 | VCCINT — Core supply voltage (1.8V) |
| Broche A4 | I/O — General-purpose user I/O ball |
| Broche B1 | I/O — General-purpose user I/O ball |
| Broche B2 | GND — Ground reference |
| Broche B3 | I/O — General-purpose user I/O ball |
| Broche B4 | VCCIO — I/O bank supply voltage |
| Broche C1 | I/O — General-purpose user I/O ball |
| Broche C2 | I/O — General-purpose user I/O ball |
| Broche C3 | TCK — JTAG test clock input |
| Broche C4 | TMS — JTAG test mode select |
| Broche D1 | TDI — JTAG test data input |
| Broche D2 | TDO — JTAG test data output |
| Broche D3 | nCONFIG — Configuration control (active low) |
| Broche D4 | nSTATUS — Configuration status (active low) |
| Broche E1 | CONF_DONE — Configuration complete indicator |
| Broche E2 | DCLK — Configuration clock |
| Broche E3 | DATA0 — Configuration data input |
| Broche E4 | I/O — General-purpose user I/O ball |
Applications typiques
EP20K400EFC672-2 convient pour 6 applications: Telecom Line Card Processing, Custom DSP Pipeline Implementation, Networking Switch and Router Bridging, PCI Bus Interface Bridging, ASIC Prototyping and Logic Emulation, Industrial Control and Test Equipment.
Telecom Line Card Processing
The EP20K400EFC672-2 is well-matched to telecom line card processing because its 400K gates and 212,992 bits of embedded RAM can absorb protocol-terminating state machines, packet buffers, and serializer/deserializer glue logic in a single device. Its 488 user I/Os easily support multi-standard backplane interfaces including H.110, TDM, and POS/PHY connections. Operating at 1.8V core with 2.5 ns propagation delay, the device meets the latency budgets of voice and early 3G baseband processing. Place the FPGA between physical-layer transceivers and the host network processor, using ESBs in dual-port RAM mode to implement FIFO buffers across clock domains.
Recommandé
Custom DSP Pipeline Implementation
The EP20K400EFC672-2's 16640 logic elements and MultiCore architecture allow implementation of multi-stage DSP datapaths including FIR filters, FFT butterflies, and custom correlators without external DSP chips. The 212,992 embedded RAM bits are sufficient for coefficient storage and ping-pong sample buffers at sample rates up to the device's 2.5 ns propagation-delay budget. Use LUT-based logic for arithmetic and ESBs as ROM lookups for sine/cosine tables or windowing coefficients. This application fits instrumentation, sonar, and early-3G channel cards where a fixed-function DSP is too inflexible.
Recommandé
Networking Switch and Router Bridging
The EP20K400EFC672-2's 488 user I/Os and 400K gate capacity make it well suited for bridging between multiple network PHYs, switch fabrics, and host processors in mid-range networking equipment. The 2.5 ns propagation delay supports line-rate processing for Fast Ethernet and Gigabit Ethernet MAC functions, while ESBs provide the buffering required for store-and-forward and cut-through switching. Use the APEX 20KE's LUT fabric for header parsing and product-term logic for TCAM-like lookup decision trees. The 672-ball FC-FBGA package also delivers the controlled-impedance signal integrity needed for MII/RGMII/SGMII interfaces.
Recommandé
PCI Bus Interface Bridging
The EP20K400EFC672-2's 488 I/O count easily accommodates 64-bit PCI or PCI-X bus interfaces plus local-bus glue, target-state machines, and DMA controllers in a single device. The 1.8V core with 2.5V/3.3V-tolerant I/O banks allow direct connection to legacy PCI signals without external level shifters. The 16,640 logic elements are sufficient for scatter-gather DMA engines, master/target arbitration, and message-signaled interrupt controllers. This makes the part well suited for legacy industrial controllers, embedded SBCs, and test equipment that must remain PCI-compatible.
Recommandé
ASIC Prototyping and Logic Emulation
The EP20K400EFC672-2 was a popular choice for ASIC prototyping because its 400K gates and 488 I/Os allowed partitioning large ASIC designs into a small number of APEX 20KE devices for bring-up and validation. The 1.8V core and 2.5 ns propagation delay deliver reasonable timing correlation with 0.18um and 0.22um ASIC processes of the same era. The 212 Kbit embedded RAM supports scratchpad memory and bus-functional model state, while the JTAG port enables in-system debug. Place multiple EP20K400EFC672-2 devices on a multi-FPGA emulator board to validate ASIC RTL before tape-out.
Recommandé
Industrial Control and Test Equipment
The EP20K400EFC672-2's combination of 488 user I/Os, embedded RAM, and 0C-85C commercial temperature range makes it suitable for industrial test-and-measurement chassis where many parallel signal channels must be acquired, processed, and forwarded. The APEX 20KE's product-term logic accelerates parallel-bit decision trees used in boundary-scan, JTAG-chain control, and ATE pin-electronics coordination. Operating from a 1.8V core with multi-voltage I/O support, the device can interface to legacy 5V instrumentation as well as 3.3V mixed-signal front ends. This application remains common in long-lifecycle production testers that are still in field service.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour EP20K400EFC672-2 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | EP20K400EFC672-2N | EP20K400EFC672-2X | EP20K400EFC672-1XN |
|---|---|---|---|---|
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Package | FC-FBGA-672 | FC-FBGA-672 - same | FC-FBGA-672 - same | FC-FBGA-672 - same |
| Logic Elements | 16640 | 16640 | 16640 | 16640 |
| Total Gates | 400000 | 400000 | 400000 | 400000 |
| Embedded RAM Bits | 212992 | 212992 | 212992 | 212992 |
| User I/Os | 488 | 488 | 488 | 488 |
| Speed Grade | -2 | -2 | -2 | -1 (slower) |
| Operating Temperature | 0C to 85C (commercial) | 0C to 85C | Extended grade | Industrial grade |
Principaux différenciateurs
- Highest user I/O count in the APEX 20KE 400K-gate tier (vs EP20K300EFC672-2)
- Drop-in lead-free variant available without redesign (vs EP20K400EFC672-2N)
- Same-family industrial temperature alternative (vs EP20K400EFC672-1XN)
Notes de conception
Estimated: Because the APEX 20KE family is obsolete, the only supported design software is Quartus II version 13.0 SP1 or earlier. Newer Quartus versions do not include APEX device support. Maintain a licensed copy of Quartus II 13.0 SP1 and a parallel Altera programming hardware chain (USB-Blaster or ByteBlaster) for ongoing bitstream generation.
Estimated: At maximum utilization (approximately 80% of 16640 logic elements switching at 50 MHz in the 672-ball FC-FBGA package), the EP20K400EFC672-2 dissipates roughly 1.5-2 W. The 1.0 mm ball pitch FC-FBGA requires a minimum 6-layer PCB stack-up with continuous ground and 1.8V power planes directly beneath the device to spread heat and provide low-impedance power delivery.
Estimated: Each VCCINT and VCCIO ball must be decoupled with a 0.1uF ceramic capacitor placed within 2 mm of the package ball, plus a 10uF bulk capacitor per power region. Use multiple GND balls stitched with vias to the inner ground plane to control return-current paths for the 488 high-speed I/Os at their switching edges.
Informations de conformité
Compliance status not stated in verified web data; the -2N suffix variant indicates a lead-free option is available in the same package. Industrial/automotive certifications are not applicable for this obsolete commercial-grade FPGA.