EP4CE15F23C8N - Cyclone IV E FPGA 15K LEs 484-BGA | Intel
Référence : EP4CE15F23C8N ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $60.88 | $60,88 |
| 10 | $56.42 | $564,20 |
| 100 | $48.55 | $4 855,00 |
| 500 | $39.21 | $19 605,00 |
| 1 000 | $33.1 | $33 100,00 |
EP4CE15F23C8N Présentation
A Field-Programmable Gate Array (FPGA) is a semiconductor IC whose logic, interconnect, and I/O can be reconfigured after manufacturing by loading a user-defined bitstream, distinguishing it from fixed-function ASICs. FPGAs sit at the top of the programmable-logic hierarchy (FPGA > CPLD > PAL/GAL > discrete logic) and excel at parallel DSP, high-speed serial bridging, and glue-logic consolidation. The Cyclone IV E family specifically targets high-volume, power-conscious applications where 60 nm process efficiency and abundant on-chip memory offer the lowest total cost of ownership in the low-density FPGA segment.
Key features include 15,408 logic elements, 516,096 bits (63 KBytes) of embedded RAM organized in M9K blocks, 343 dedicated 18x18 multipliers, four general-purpose PLLs, and up to 343 user I/O pins. The device supports LVDS, SSTL, and LVCMOS I/O standards and integrates hard IP for PCI Express Gen1, external memory interfaces (DDR/DDR2/QDRII), and serial configuration via AS, PS, JTAG, and FPP modes.
The Cyclone IV E series uses a 60 nm low-leakage CMOS process with a 1.0 V core voltage (VCCINT) and 2.5 V/3.3 V-tolerant I/O banks (VCCIO). This 1.0 V core reduces dynamic power by up to 25% versus the prior Cyclone III generation while preserving timing closure on existing reference designs. Designers typically pair the EP4CE15F23C8N with a separate external configuration flash, which loads the bitstream at power-on through the dedicated AS configuration port.
Typical applications include industrial motor control, video processing pipelines, telecom line-card glue logic, low-density ASIC prototyping, and consumer display controllers. The combination of 343 multipliers and 516 Kbits of block RAM makes it especially attractive for cost-driven DSP front-ends where parallel multiply-accumulate throughput matters more than raw logic density.
When designing with the EP4CE15F23C8N, pay attention to VCCIO bank planning (each bank supports one VCCIO voltage) and use the Quartus II / Quartus Prime Pin Planner to assign LVDS pairs within their dedicated true-LVDS capable pins. The 484-BGA FineLine BGA package requires a 1.0 mm-pitch PCB footprint and standard JEDEC MSL3 moisture handling.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone datasheet - giving engineers a single reference for component selection, lifecycle status, and PCB integration.
Alternatives de remplacement direct pour EP4CE15F23C8N — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec EP4CE15F23C8N (même facteur de forme et même empreinte) — différant par Speed Grade, Package, Operating Temperature, Process Technology, Configuration Modes.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
EP4CE15F23C7N
✅ Remplacement direct✓ En stock
$12.85 / unité
Voir la fiche technique →EP4CE15F23C6
✅ Remplacement direct✓ En stock
$20.1 / unité
Voir la fiche technique →EP4CE15F23C8
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
EP4CE15E22C8N
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$15.95 / unité
Voir la fiche technique →EP4CE115F23C8N
✅ Remplacement direct✓ En stock
$145 / unité
Voir la fiche technique →EP4CE15F23C8N Valeurs maximales et caractéristiques électriques
| Series | Cyclone IV E |
| Logic Elements | 15,408 |
| Embedded Memory Bits | 516,096 bits (63 KBytes) |
| Embedded Multipliers (18x18) | 343 |
| General-purpose PLLs | 4 |
| Maximum User I/O Pins | 343 |
| Boîtier | 484-BGA (FineLine BGA, F23, 23x23 mm, 1.0 mm pitch) |
| Process Technology | 60 nm low-leakage CMOS |
| Core Voltage (VCCINT) | 1.0 V to 1.2 V |
| I/O Bank Voltage (VCCIO) | 1.2 V / 1.5 V / 1.8 V / 2.5 V / 3.3 V |
| Température de fonctionnement | 0C to 85C (Commercial) |
| Speed Grade | C8 (commercial, 8 ns internal timing) |
| Configuration Modes | AS / PS / JTAG / FPP |
| Type de montage | Surface Mount (BGA) |
| Niveau MSL | MSL3 (per JEDEC J-STD-020) |
| Statut RoHS | Compliant |
| Hard IP Blocks | PCIe Gen1 root port, external memory interface |
| Embedded Memory Type | M9K (9 Kbit each) |
Guide de configuration des broches du EP4CE15F23C8N 484-bga (fineline bga, f23, 23x23 mm, 1.0 mm pitch)
Configuration des broches du EP4CE15F23C8N (boîtier 484-bga (fineline bga, f23, 23x23 mm, 1.0 mm pitch)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour EP4CE15F23C8N.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
EP4CE15F23C8N convient pour 6 applications: Industrial Motor Control, Video Processing Pipeline, Telecom Line-Card Glue Logic, ASIC Prototyping and Emulation, Consumer Display Controller, Test and Measurement Front-End.
Industrial Motor Control
The EP4CE15F23C8N's 343 dedicated 18x18 multipliers and four general-purpose PLLs make it well-suited for closed-loop field-oriented control (FOC) of three-phase AC induction and PMSM motors. The 1.0 V low-leakage core reduces inverter-board thermal load by approximately 25% versus prior-generation Cyclone III designs, while 343 user I/Os drive parallel PWM channels and encoder feedback. Per Cyclone IV family datasheet, the device supports the deterministic interrupt latency required for sub-microsecond current-loop update rates in industrial servo drives.
Recommandé
Video Processing Pipeline
With 516 Kbits of M9K block RAM and 343 multipliers, the EP4CE15F23C8N absorbs one or two full HD scan-line buffers plus color-space conversion filters in parallel. The four PLLs generate the pixel clock, memory clock, and bus clock from a single 27 MHz reference. The C8 speed grade comfortably supports 1080p60 pixel rates at the device's rated fmax for parallel RGB/YUV interfaces, making this FPGA a popular choice for low-cost video mixers, scalers, and industrial camera front-ends.
Recommandé
Telecom Line-Card Glue Logic
Telecom access equipment (DSLAMs, GPON OLT line cards, and small-cell backhaul) often requires bridging between legacy parallel buses and modern serial interfaces without consuming valuable ASIC gate count. The EP4CE15F23C8N provides 343 user I/O and PCI Express Gen1 hard IP, replacing a handful of CPLDs and bus-switch ASICs with a single device. Per Cyclone IV datasheet, the integrated PCIe Gen1 endpoint saves BOM cost and board area in 3G/4G small-cell designs.
Recommandé
ASIC Prototyping and Emulation
Engineering teams frequently use the EP4CE15F23C8N to prototype mid-complexity ASICs in the 50K-200K gate-equivalent range before committing to NRE. The 15,408 logic elements support real-world RTL from typical interface-bridging or control-plane ASICs, and the 343 multipliers enable embedded DSP blocks to be exercised in silicon rather than just simulation. According to Altera (now Intel) design notes, the F23 BGA provides enough I/O to break out full GPMC, USB 2.0, and SDIO ports for bring-up.
Recommandé
Consumer Display Controller
The EP4CE15F23C8N drives cost-sensitive consumer LCD/OLED controllers, where it handles LVDS or eDP bridge logic, gamma correction, and backlight dimming PWM. The 343 I/Os comfortably route 24-bit parallel RGB plus SPI/I2C side-band control. The Cyclone IV E family's sub-1.5 W typical static power keeps the entire controller within consumer-energy-star thermal budgets without active cooling.
Recommandé
Test and Measurement Front-End
Test instruments use the EP4CE15F23C8N for high-speed signal conditioning, custom trigger logic, and protocol-aware pattern generation. The 343 multipliers enable on-chip FFT-style preprocessing of incoming ADC streams at hundreds of MSPS. The PLLs synthesize multiple clock domains from a single external oscillator, while the 343 user I/Os route parallel ADC data plus LVD-based triggers without external bus multiplexers - reducing BOM cost versus multi-CPLD solutions.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour EP4CE15F23C8N — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | EP4CE15F23C7N | EP4CE15F23C6 | EP4CE15F23C8 | EP4CE115F23C8N |
|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel |
| Package | 484-BGA (F23) | 484-BGA (F23) - same | 484-BGA (F23) - same | 484-BGA (F23) - same | 484-BGA (F23) - same |
| Logic Elements | 15,408 | 15,408 | 15,408 | 15,408 | 114,480 |
| Embedded Memory | 516,096 bits | 516,096 bits | 516,096 bits | 516,096 bits | 3,981,312 bits |
| 18x18 Multipliers | 343 | 343 | 343 | 343 | 532 |
| Speed Grade | C8 (commercial, 8 ns) | C7 (~7 ns, faster fmax) | C6 (~6 ns, fastest fmax) | C8 | C8 |
| User I/O Pins | 343 | 343 | 343 | 343 | 528 |
| Operating Temperature | 0C to 85C (Commercial) | 0C to 85C | 0C to 85C | 0C to 85C | 0C to 85C |
| Lifecycle Status | Active | Active | Active | Active | Active |
Principaux différenciateurs
- 15K logic elements with 343 hardware multipliers in mid-density class (vs EP4CE10F17C8N)
- C8 speed grade offers balance of cost and timing margin (vs EP4CE15F23C7N)
- Drop-in scalable to 115K LE family member on identical BGA (vs EP4CE115F23C8N)
Notes de conception
Estimated: At typical 25% toggle rate with all 343 multipliers active, total power consumption is approximately 1.5-2.0 W. Designers should plan for a 2-layer copper pour directly beneath the F23 BGA to dissipate heat, and follow Intel's PowerPlay early power estimator in Quartus II / Quartus Prime to size decoupling. Decoupling requires 100 nF X7R on every VCCINT/VCCIO pin pair, plus 10 uF bulk capacitors on each power rail.
The 484-ball FineLine BGA package uses a 1.0 mm ball pitch. According to Cyclone IV hardware design guidelines, PCB layout requires a 4-layer minimum stack-up with a dedicated ground plane directly beneath the BGA fan-out. All signal vias-in-pad should use filled-and-capped construction per IPC-7095. Following JEDEC MSL3 handling procedures is mandatory to avoid popcorn cracking during reflow.
Configure the Cyclone IV PLL bank for differential clock input on dedicated clock-input pins (CLK[0..15]) only. Each PLL requires its own analog VCCD_PLL supply decoupled with a pi-filter (ferrite bead + 10 uF + 100 nF). Per Cyclone IV datasheet, the PLL analog supply must be isolated from digital switching noise - route it as a separate power island connected at a single point to the main 1.0 V plane.
Avoid using MSEL pins as general-purpose I/O - they are sampled at power-on to select the configuration mode (AS, PS, FPP, JTAG) and any contention during configuration will halt the device. The CONF_DONE and nSTATUS pins require external 10 kohm pull-ups to VCCIO of the configuration bank. Forgetting this is the single most common reason for first-time prototype failures on Cyclone IV boards.
Informations de conformité
RoHS compliant per Molex/DigiKey listing. Industrial variants (I-grade suffix) available in same family for -40C to 100C operation. AEC-Q100 qualification not available for the C8 commercial-temperature variant; automotive designs should use the EP4CE15F23I8N or similar I-grade part.
