EPF10K200SFI672-2N - 200K-Gate FLEX 10KE FPGA, 672-BGA | Intel
Référence : EPF10K200SFI672-2N ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $285 | $285,00 |
| 10 | $248 | $2 480,00 |
| 100 | $195 | $19 500,00 |
| 500 | $162 | $81 000,00 |
| 1 000 | $138 | $138 000,00 |
EPF10K200SFI672-2N Présentation
FLEX 10KE devices belong to the FLEX (Flexible Logic Element matriX) family of SRAM-based FPGAs, with each LE containing a 4-input look-up table, a programmable register, and dedicated carry and cascade chains. FLEX 10KE extends the original FLEX 10K architecture by adding True-Look-Up-Table dual-port embedded array blocks (EABs) that double as 4 Kbit SRAM memories, and by adding FastTrack Interconnect routing that improves timing predictability and density utilization. They sit within the broader hierarchy of SRAM-based programmable logic devices (PLDs), which in turn form a major branch of digital semiconductor ICs.
Key differentiating specifications include 9,984 logic elements, 12 EABs delivering 98,304 RAM bits, 470 user I/Os, a 0.22 um CMOS process, 2.5 V core supply (5.0 V tolerant I/O with PCI compliance), JTAG boundary-scan test per IEEE Std. 1149.1, and 200 MHz internal operation. The embedded JTAG circuitry adds up to 31,250 gates overhead without consuming user logic.
Typical applications include telecommunications line cards, industrial control backplanes, military/aerospace signal processing, and PCI-based add-in card prototyping. The combination of 470 I/Os and ~200K gates supports wide datapath designs including 32-bit microcontrollers, multi-channel DMA engines, and protocol bridges.
When designing with this device, note that it is SRAM-based and therefore requires a configuration ROM (such as an EPC2) on every board - the FLEX 10KE will not retain its configuration through power cycles without external boot storage. The 672-FBGA package has a 27 x 27 mm body with 1.0 mm ball pitch, so PCB layout must support fine-pitch BGA fanout with microvia or via-in-pad technology on most stackups. EOL warnings apply; check Intel/Altera PCN history before new designs.
This page synthesizes datasheet specifications, distributor pricing, drop-in alternatives from the same FLEX 10KE family, and practical design notes that the bare datasheet PDF does not provide in one place.
Alternatives de remplacement direct pour EPF10K200SFI672-2N — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec EPF10K200SFI672-2N (même facteur de forme et même empreinte) — différant par Process Technology, Operating Temperature, RoHS Status, Embedded Array Blocks (EABs), Package.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
EPF10K200SFI672-2
✅ Remplacement direct✓ En stock
$99.5 / unité
Voir la fiche technique →EPF10K200SFI672-2B
✅ Remplacement direct✓ En stock
$188 / unité
Voir la fiche technique →EPF10K200EFC672-2N
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
EPF10K200EFC672-3
✅ Remplacement direct✓ En stock
$115 / unité
Voir la fiche technique →EPF10K200SBC600-2
✅ Remplacement direct✓ En stock
$85 / unité
Voir la fiche technique →EPF10K200SFI672-2N Valeurs maximales et caractéristiques électriques
| Family | FLEX 10KE |
| Device Logic Elements | 9,984 |
| Typical Gates | 200,000 |
| Embedded Memory (EAB) | 12 EABs, 98,304 bits total |
| User I/Os | 470 |
| Process Technology | 0.22 um CMOS |
| Core Supply Voltage | 2.5 V |
| I/O Supply Voltage | 3.3 V (5.0 V tolerant) |
| Operating Temperature Grade | Industrial (-40C to +85C) |
| Speed Grade | -2 (mid) |
| Boîtier | 672-ball FBGA (FineLine BGA), 27 x 27 mm, 1.0 mm pitch |
| Type de montage | Surface Mount |
| JTAG Boundary-Scan | IEEE Std. 1149.1 compliant |
| Configuration Method | SRAM-based (requires external boot ROM) |
| Statut RoHS | Lead-free (N suffix) |
Guide de configuration des broches du EPF10K200SFI672-2N 672-ball fbga (fineline bga), 27 x 27 mm, 1.0 mm pitch
Configuration des broches du EPF10K200SFI672-2N (boîtier 672-ball fbga (fineline bga), 27 x 27 mm, 1.0 mm pitch). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour EPF10K200SFI672-2N.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
EPF10K200SFI672-2N convient pour 6 applications: Telecom Line Card Glue Logic, Industrial Control Backplane, PCI Add-In Card Prototyping, Military/Aerospace Signal Processing, Legacy System Sustenance (Board Repair), Test & Measurement Instrumentation.
Telecom Line Card Glue Logic
The EPF10K200SFI672-2N fits telecom line cards because its 9,984 logic elements and 470 user I/Os comfortably absorb 32-bit datapath glue between framer, network processor, and SERDES chips. Industrial temperature (-40C to +85C) lets the device survive outside-plant enclosures without thermal derating. The 12 EABs (98 Kbits of dual-port RAM) are sized for typical 256-deep x 32-bit FIFO/lookup-table structures used in HDLC or ATM cell buffering. Source: FLEX 10KE datasheet typical applications.
Recommandé
Industrial Control Backplane
The EPF10K200SFI672-2N is well suited for industrial backplane controllers where 470 I/Os handle parallel sensor and actuator buses, and the industrial temperature range tolerates factory-floor thermal stress. The device's 200K-gate capacity supports custom protocol stacks (Profibus, Modbus, EtherCAT MAC layers) alongside backplane arbitration logic. The 5.0 V tolerant I/Os interface directly to legacy TTL backplanes without level shifters, simplifying PCB design.
Recommandé
PCI Add-In Card Prototyping
The EPF10K200SFI672-2N's PCI-compliant 5.0 V I/Os and 470-pin count let engineers prototype 32-bit/33 MHz PCI add-in cards on a single FPGA without external bus drivers. The 12 EABs provide scratchpad RAM for DMA descriptor tables, while 9,984 LEs implement the bus-master state machine and any application-specific payload logic. Speed grade -2 comfortably meets 33 MHz PCI timing on internal clocked paths.
Recommandé
Military/Aerospace Signal Processing
The industrial temperature grade and established FLEX 10KE silicon pedigree make the EPF10K200SFI672-2N a candidate for military and aerospace signal-processing subsystems where long-term die availability (not commercial EOL) is critical. 200K gates and 470 I/Os accommodate radar timing, MIL-STD-1553 protocol layers, and multi-channel ADC interfaces. Designers should pair it with ruggedized SBCs and screened configuration PROMs to meet mission profile.
Recommandé
Legacy System Sustenance (Board Repair)
The EPF10K200SFI672-2N is the OEM-specified FPGA for many legacy Altera-based boards where the original FLEX 10KE design cannot be re-spun to a newer FPGA family without firmware redevelopment. Stocking this part - or its commercial-temperature drop-in EPF10K200SFI672-2 - allows field repair of installed telecom, industrial, and test equipment. Independent distributors such as Partstack, Vyrian, and Jotrin currently quote inventory for this MPN.
Recommandé
Test & Measurement Instrumentation
The EPF10K200SFI672-2N's 470 I/Os and embedded RAM fit parallel ATE pin-electronics cards where each pin channel requires pattern generation, timing, and capture memory. The 12 EABs deliver 98 Kbits of capture buffer per FPGA, while 9,984 LEs implement per-pin formatting for protocols such as JTAG, SPI, and I2C. Industrial temperature grade handles instrument-internal ambient without additional cooling.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour EPF10K200SFI672-2N — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | EPF10K200SFI672-2 | EPF10K200SFI672-2B | EPF10K200EFC672-2N | EPF10K200EFC672-3 | EPF10K200SBC600-2 |
|---|---|---|---|---|---|---|
| Package | 672-ball FBGA (27x27 mm, 1.0 mm pitch) | 672-ball FBGA - same | 672-ball FBGA - same | 672-ball FBGA - same | 672-ball FBGA - same | 600-ball BGA - same family, different pinout |
| Brand | Intel (formerly Altera) | Intel | Intel | Intel | Intel | Intel |
| Family | FLEX 10KE (5.0 V, 2.5 V core) | FLEX 10KE | FLEX 10KE | FLEX 10KA (3.3 V) | FLEX 10KA (3.3 V) | FLEX 10KE |
| Logic Elements | 9,984 | 9,984 | 9,984 | 9,984 | 9,984 | 9,984 |
| Embedded Memory | 98,304 bits (12 EABs) | 98,304 bits | 98,304 bits | 98,304 bits | 98,304 bits | 98,304 bits |
| Temperature Grade | Industrial (-40C to +85C) | Commercial (0C to +70C) | Industrial (-40C to +85C) | Commercial (0C to +70C) | Commercial (0C to +70C) | Commercial (0C to +70C) |
| Speed Grade | -2 (mid) | -2 (mid) | -2 (mid) | -2 (mid) | -3 (slower) | -2 (mid) |
| Core Voltage | 2.5 V | 2.5 V | 2.5 V | 3.3 V | 3.3 V | 2.5 V |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Principaux différenciateurs
- Industrial temperature grade in 672-FBGA package (vs EPF10K200SFC672-2)
- Lead-free RoHS-compliant ball finish (N suffix) (vs EPF10K200SFI672-2B)
- FLEX 10KE 5 V-tolerant I/Os with 2.5 V core (vs EPF10K200EFC672-2N)
Notes de conception
The 672-ball FineLine BGA package uses 1.0 mm ball pitch on a 27 x 27 mm body. PCB stackup must support at least 4-6 routing layers with microvia or via-in-pad technology to fan out signals; a 1-2-1 build-up stackup with 0.4 mm laser-drilled microvias is the recommended baseline. Without microvias, signal escape from the inner rows becomes impractical. Confirm the PCB vendor has FLEX 10KE BGA escape patterns qualified before layout start.
FLEX 10KE devices require both a 2.5 V core rail and a 3.3 V I/O rail; the I/O bank can additionally tolerate 5.0 V inputs. The EPF10K200SFI672-2N can draw several hundred mA on the 2.5 V rail depending on toggle rate - decouple with one 100 uF bulk capacitor, four 10 uF ceramics distributed around the package perimeter, and 0.1 uF ceramics placed within 5 mm of each VCC pin group. Power sequencing: VCCINT (2.5 V) must rise no later than VCCIO (3.3 V) to avoid I/O latch-up.
FLEX 10KE is SRAM-based - the bitstream is lost on every power-down. A configuration device (Altera EPC2 or EPC8 family) is mandatory, not optional. The MSEL pins select configuration mode (PS vs PPS) and must be pulled to the correct logic level at power-up. Designers also frequently forget that the JTAG TCK pin should be weakly pulled down to prevent accidental configuration entry during board reset. Estimated: configuration time for a fully-utilized 200K-gate bitstream is approximately 100 ms in PS mode.
Estimated: at 100 MHz toggle rate and 50% utilization, the EPF10K200SFI672-2N dissipates approximately 1.5 W. The 672-FBGA package has theta_JA of roughly 15-18 C/W on a JEDEC 4-layer test board with no airflow, giving a 25C junction rise above ambient. Industrial temperature allows operation up to 85C ambient, so junction stays below 110C - safe but with limited margin. Add thermal vias under the central ball grid and consider bottom-side copper pours if a higher toggle rate is expected.
Informations de conformité
Lead-free confirmed by N suffix per Altera FLEX 10KE ordering nomenclature. Halogen-free and conflict-minerals status not explicitly published in the verified web data; treat as unknown.
