Altera

EPF6024AQI240-1 - FLEX 6000 FPGA 24K Gates 240-PQFP | Altera

Name: EPF6024AQI240-1 - FLEX 6000 FPGA 24K Gates 240-PQFP | Altera
Brand: Altera
SKU: EPF6024AQI240-1
Price: 15.2 USD
Availability: InStock

Référence : EPF6024AQI240-1 ✗ Fin de vie

En stock Expédié sous 1 à 3 jours ouvrés

240-pin PQFP Package 172 MHz Speed

À partir de $15.2 USD / unité

MOQ : 1 |

Prix mis à jour : 2026-09-11

Tarifs dégressifs

Qté	Prix unitaire	Total
1	$38.5	$38,50
10	$32.4	$324,00
100	$24.95	$2 495,00
500	$19.8	$9 900,00
1 000	$15.2	$15 200,00

ℹ️ Tous les prix sont en USD

Voir la fiche technique (PDF) Voir les alternatives

Quantité

EPF6024AQI240-1 Présentation

The Altera (Intel) EPF6024AQI240-1 is a member of the FLEX 6000 programmable logic device family, delivering approximately 24,000 typical gates (USABLE gates up to 19,600) in a 240-pin Power Quad Flat Pack (PQFP) package with industrial temperature grade (-40C to +85C). The device features 4 dedicated inputs, 199 user I/O lines, and supports a maximum clock frequency of 172 MHz, targeting glue-logic, bus-interface, and peripheral bridging applications.

A Field Programmable Gate Array (FPGA) is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable interconnect, and programmable I/O cells, allowing designers to implement custom digital circuits after fabrication. FPGAs sit above ASICs and CPLDs in flexibility: they offer higher logic density than CPLDs while remaining re-programmable, making them ideal for prototyping, low-volume production, and applications where standards or protocols may evolve. The FLEX 6000 family specifically targets cost-sensitive glue-logic and bus-interface designs with SRAM-based configuration.

Key features of the EPF6024AQI240-1 include 4 dedicated input pins, 199 bidirectional I/O pins, on-chip SRAM-based configuration memory, JTAG-based IEEE 1149.1 boundary-scan test support, and multi-voltage I/O support for interfacing with 3.3V and 5.0V devices. The 240-pin PQFP package uses a 0.500 mm terminal pitch and provides a fine-pitch surface-mount form factor suitable for moderate-density designs.

The device is built on a CMOS SRAM process and is configured via a serial configuration EPROM or microprocessor interface. Its 4-input look-up table (LUT)-based logic elements and FastTrack interconnect deliver predictable timing with pin-to-pin logic delays in the low nanosecond range, enabling high-speed state machines and datapath functions.

Typical applications include PCI bus interfaces, peripheral bridging, DSP co-processing front-ends, telecommunications line-card glue logic, and industrial control system integration. Its 199 I/O make it well suited to wide-bus multiplexing and protocol conversion.

When designing with this FPGA, ensure proper decoupling (0.1 uF ceramic per VCC pin group), adherence to the multi-voltage I/O sequencing requirements, and provision for a configuration EPROM or microcontroller-based configuration loader. Industrial-grade parts require careful thermal management in enclosed enclosures.

This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone, providing a single reference for engineers evaluating or maintaining legacy FLEX 6000 designs.

Alternatives de remplacement direct pour EPF6024AQI240-1 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec EPF6024AQI240-1 (même facteur de forme et même empreinte) — différant par Package, Process Technology, Operating Temperature, Speed Grade, Configuration Method.

EPF6024AQC240-1

Altera

Process Technology: 0.42 µm CMOS, 4 metal layers, SRAM-based

Operating Temperature: 0 °C to +85 °C (commercial grade)