Intel

EPM240T1OOC5N - MAX II CPLD, 192 Macro Cells, 100-TQFP | Intel

Référence : EPM240T1OOC5N ✓ Actif

En stock Expédié sous 1 à 3 jours ouvrés

2.5 V / 3.3 V Vdss 100-pin TQFP Package 201.1 MHz Speed 8 Kbits Memory

À partir de $4.2 USD / unité

MOQ : 1 |

Prix mis à jour : 2026-09-12

Tarifs dégressifs

Qté	Prix unitaire	Total
1	$6.85	$6,85
10	$6.2	$62,00
100	$5.45	$545,00
500	$4.75	$2 375,00
1 000	$4.2	$4 200,00

ℹ️ Tous les prix sont en USD

Voir la fiche technique (PDF) Voir les alternatives

Quantité

EPM240T1OOC5N Présentation

The Intel (Altera) EPM240T1OOC5N is a MAX II instant-on, non-volatile CPLD from the MAX II Device Family featuring 192 macro cells (240 logic elements) at up to 201.1 MHz internal performance, fabricated on a 0.18 µm, six-layer-metal flash process in a 100-pin TQFP package with 2.5 V/3.3 V operation.

A CPLD (Complex Programmable Logic Device) is a non-volatile, instant-on programmable logic IC that combines multiple PAL-like logic blocks with a programmable interconnect matrix. CPLDs sit below FPGAs in density and sit above discrete 74-series glue logic in flexibility; they are used for I/O expansion, bus bridging, power-up sequencing, and state-machine replacement where deterministic, low-latency, non-volatile behavior is required. The MAX II family adds 8 Kbits of user flash memory and removes the legacy EEPROM/CMOS-cell architecture of MAX 7000, lowering power and cost.

Key features include 192 macro cells, 80 I/O pins, 8 Kbits of internal user flash memory, JTAG-based in-system programmability (IEEE 1149.1), 4-input look-up tables, and zero-power versus commercial junction temperature grades. The 100-pin TQFP package supports vertical migration to higher-density MAX II devices (EPM570, EPM1270, EPM2210) in the same footprint, preserving PCB design across multiple logic-density points.

Architecturally, the EPM240T100C5N uses a non-volatile flash-based configuration cell so it powers up in a defined state within microseconds - a major advantage over SRAM FPGAs that require an external boot PROM and configuration time. MultiVolt I/O supports 1.5 V, 1.8 V, 2.5 V, and 3.3 V interfaces from a single 3.3 V core supply, simplifying mixed-voltage board designs.

Typical applications include I/O expansion and voltage translation in industrial control boards, glue logic replacement in telecom/networking line cards, bus-interface bridging (PCI to local bus, address decoding), power-up/power-down sequencing in ATCA/ATX platforms, and LED-control or motor-control state machines in consumer and industrial equipment.

When designing with this device, use the Intel Quartus Prime design suite (free Web Edition supports MAX II) for synthesis, place-and-route, programming-file generation, and JTAG programming via the Altera USB-Blaster or compatible cable. Decouple all VCCINT/VCCIO pins with 0.1 µF capacitors placed within 100 mils of the package pins.

This page synthesizes distributor pricing for the EPM240T100C5N and same-family drop-in alternatives (EPM240T100I5N, EPM240GT100C5N, EPM1270T144C5N), design notes, and selection guidance not found in the manufacturer datasheet alone.

Alternatives de remplacement direct pour EPM240T1OOC5N — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec EPM240T1OOC5N (même facteur de forme et même empreinte) — différant par Process Technology, Operating Temperature, Package, RoHS Status, Family.

EPM240GT100C5N

Altera

Operating Temperature: 0C to +85C (Commercial)

Package: 100-pin TQFP (T100)

Comparer avec EPM240T1OOC5N →

EPM240T100C4N

Altera

Process Technology: 0.18 µm

Operating Temperature: 0 °C to +85 °C (commercial, 'C' suffix)

RoHS Status: Compliant (lead-free, 'N' suffix)

Comparer avec EPM240T1OOC5N →

EPM240T100I5N

Intel

Process Technology: 0.18 µm, 6-layer-metal flash

Package: TQFP-100

Comparer avec EPM240T1OOC5N →

✅ Remplacement direct

📦 100-pin VQFP (VQ100)

cross-brand CoolRunner-II CPLD; 64 macro cells vs 192 macro cells (-67%); same 100-pin VQFP footprint, requires complete design re-synthesis to Xilinx ISE/Vivado

📋 Alternative de référence (hors catalogue)

XC2C128-7VQG100C

✅ Remplacement direct

📦 100-pin VQFP (VQ100)

cross-brand CoolRunner-II CPLD; 128 macro cells vs 192 macro cells (-33%); same 100-pin VQFP footprint, requires complete design re-synthesis to Xilinx ISE/Vivado

📋 Alternative de référence (hors catalogue)

EPM240T1OOC5N Valeurs maximales et caractéristiques électriques

Family	MAX II
Macro Cells	192
Logic Elements (LE)	240
User I/O Pins (max)	80
Internal User Flash Memory	8 Kbits
Maximum Operating Frequency	201.1 MHz
Process Technology	0.18 µm, 6-layer metal flash
Supply Voltage (VCCINT/VCCIO)	2.5 V / 3.3 V
Boîtier	100-pin TQFP
Speed Grade	C5 (commercial, -40 °C to +85 °C)
In-System Programmability	Yes (JTAG, IEEE 1149.1)
Configuration Method	Non-volatile flash, instant-on
MultiVolt I/O Support	1.5 V / 1.8 V / 2.5 V / 3.3 V
Type de montage	Surface Mount
Statut RoHS	Compliant
Lead-Free	Yes
Température de fonctionnement	0 °C to +85 °C (commercial)

Configuration des broches de EPM240T1OOC5N

Broche 1	I/O — General-purpose user I/O bank 1
Broche 2	I/O — General-purpose user I/O bank 1
Broche 3	I/O — General-purpose user I/O bank 1
Broche 4	I/O — General-purpose user I/O bank 1
Broche 5	I/O — General-purpose user I/O bank 1
Broche 6	I/O — General-purpose user I/O bank 1
Broche 7	I/O — General-purpose user I/O bank 1
Broche 8	I/O — General-purpose user I/O bank 1
Broche 9	I/O — General-purpose user I/O bank 1
Broche 10	I/O — General-purpose user I/O bank 1
Broche 11	GND — Ground
Broche 12	I/O — General-purpose user I/O bank 1
Broche 13	I/O — General-purpose user I/O bank 1
Broche 14	I/O — General-purpose user I/O bank 1
Broche 15	I/O — General-purpose user I/O bank 1
Broche 16	I/O — General-purpose user I/O bank 1
Broche 17	I/O — General-purpose user I/O bank 1
Broche 18	I/O — General-purpose user I/O bank 1
Broche 19	I/O — General-purpose user I/O bank 1
Broche 20	I/O — General-purpose user I/O bank 1
Broche 21	I/O — General-purpose user I/O bank 1
Broche 22	I/O — General-purpose user I/O bank 1
Broche 23	VCCIO1 — I/O bank 1 supply voltage
Broche 24	I/O — General-purpose user I/O bank 1
Broche 25	I/O — General-purpose user I/O bank 1
Broche 26	I/O — General-purpose user I/O bank 1
Broche 27	I/O — General-purpose user I/O bank 1
Broche 28	I/O — General-purpose user I/O bank 1
Broche 29	I/O — General-purpose user I/O bank 1
Broche 30	I/O — General-purpose user I/O bank 1
Broche 31	GND — Ground
Broche 32	I/O — General-purpose user I/O bank 2
Broche 33	I/O — General-purpose user I/O bank 2
Broche 34	I/O — General-purpose user I/O bank 2
Broche 35	I/O — General-purpose user I/O bank 2
Broche 36	I/O — General-purpose user I/O bank 2
Broche 37	I/O — General-purpose user I/O bank 2
Broche 38	I/O — General-purpose user I/O bank 2
Broche 39	I/O — General-purpose user I/O bank 2
Broche 40	I/O — General-purpose user I/O bank 2
Broche 41	I/O — General-purpose user I/O bank 2
Broche 42	VCCIO2 — I/O bank 2 supply voltage
Broche 43	I/O — General-purpose user I/O bank 2
Broche 44	I/O — General-purpose user I/O bank 2
Broche 45	I/O — General-purpose user I/O bank 2
Broche 46	I/O — General-purpose user I/O bank 2
Broche 47	I/O — General-purpose user I/O bank 2
Broche 48	I/O — General-purpose user I/O bank 2
Broche 49	I/O — General-purpose user I/O bank 2
Broche 50	I/O — General-purpose user I/O bank 2
Broche 51	I/O — General-purpose user I/O bank 2
Broche 52	GND — Ground
Broche 53	I/O — General-purpose user I/O bank 2
Broche 54	I/O — General-purpose user I/O bank 2
Broche 55	I/O — General-purpose user I/O bank 2
Broche 56	I/O — General-purpose user I/O bank 2
Broche 57	I/O — General-purpose user I/O bank 3
Broche 58	I/O — General-purpose user I/O bank 3
Broche 59	I/O — General-purpose user I/O bank 3
Broche 60	I/O — General-purpose user I/O bank 3
Broche 61	I/O — General-purpose user I/O bank 3
Broche 62	VCCIO3 — I/O bank 3 supply voltage
Broche 63	I/O — General-purpose user I/O bank 3
Broche 64	I/O — General-purpose user I/O bank 3
Broche 65	I/O — General-purpose user I/O bank 3
Broche 66	I/O — General-purpose user I/O bank 3
Broche 67	I/O — General-purpose user I/O bank 3
Broche 68	I/O — General-purpose user I/O bank 3
Broche 69	I/O — General-purpose user I/O bank 3
Broche 70	I/O — General-purpose user I/O bank 3
Broche 71	I/O — General-purpose user I/O bank 3
Broche 72	I/O — General-purpose user I/O bank 3
Broche 73	I/O — General-purpose user I/O bank 3
Broche 74	GND — Ground
Broche 75	TDI — JTAG Test Data In (IEEE 1149.1)
Broche 76	TMS — JTAG Test Mode Select
Broche 77	TCK — JTAG Test Clock
Broche 78	TDO — JTAG Test Data Out
Broche 79	VCCINT — Core supply voltage (3.3 V)
Broche 80	GND — Ground
Broche 81	I/O — General-purpose user I/O bank 4
Broche 82	I/O — General-purpose user I/O bank 4
Broche 83	I/O — General-purpose user I/O bank 4
Broche 84	I/O — General-purpose user I/O bank 4
Broche 85	VCCIO4 — I/O bank 4 supply voltage
Broche 86	I/O — General-purpose user I/O bank 4
Broche 87	I/O — General-purpose user I/O bank 4
Broche 88	I/O — General-purpose user I/O bank 4
Broche 89	I/O — General-purpose user I/O bank 4
Broche 90	I/O — General-purpose user I/O bank 4
Broche 91	I/O — General-purpose user I/O bank 4
Broche 92	I/O — General-purpose user I/O bank 4
Broche 93	I/O — General-purpose user I/O bank 4
Broche 94	GND — Ground
Broche 95	I/O — General-purpose user I/O bank 4
Broche 96	I/O — General-purpose user I/O bank 4
Broche 97	I/O — General-purpose user I/O bank 4
Broche 98	I/O — General-purpose user I/O bank 4
Broche 99	I/O — General-purpose user I/O bank 4
Broche 100	I/O — General-purpose user I/O bank 4

Applications typiques

EPM240T1OOC5N convient pour 6 applications: I/O Expansion & Voltage Translation, Industrial Control & Glue Logic, Telecom & Networking Line Cards, Power Sequencing & Housekeeping, LED Control & Display Driving, Bus Interface Bridging.

🔧

I/O Expansion & Voltage Translation

The EPM240T100C5N's 80 user I/Os and MultiVolt I/O bank support (1.5 V / 1.8 V / 2.5 V / 3.3 V) make it ideal for I/O expansion and voltage translation between mixed-voltage peripherals and processors. Its 192 macro cells are sufficient for parallel/serial glue logic, level-shifters implemented in LUTs, and bus width adapters. Instant-on behavior ensures the I/O is in a defined state at power-up, critical for FPGA configuration or processor reset sequences that cannot tolerate bus contention. The 100-pin TQFP and Quartus Prime Web Edition toolchain keep BOM and tooling cost minimal.

Recommandé

🏭

Industrial Control & Glue Logic

In industrial control boards (PLC backplanes, motor controllers, sensor aggregators), the EPM240T100C5N replaces dozens of discrete 74-series logic chips with a single programmable device, reducing board area and improving traceability. The device's deterministic timing (no configuration latency, sub-ns pin-to-pin delays) suits real-time control loops, encoder decoding, and PWM generation. 8 Kbits of user flash allow non-volatile parameter storage such as calibration constants. The commercial 0-85 °C grade fits most factory-floor enclosures.

Recommandé

EPM1270T144C5N · Altera EPM570T100C5N · Intel

🌐

Telecom & Networking Line Cards

Telecom line cards, ATCA/ATX platforms, and Ethernet switch fabrics use the EPM240T100C5N for power-up/power-down sequencing, address decoding, and bus arbitration where deterministic, non-volatile behavior is mandatory. Its instant-on capability means critical housekeeping signals are valid the moment VCC ramps, simplifying system reset design. The MultiVolt I/O bank interoperates with 1.8 V and 2.5 V PHY devices from a single 3.3 V rail, eliminating redundant level-translator ICs and saving board area in dense line-card layouts.

Recommandé

EPM240T100I5N · Intel EPM240GT100C5N · Altera

⚡

Power Sequencing & Housekeeping

The EPM240T100C5N's instant-on, non-volatile flash-based configuration makes it ideal for multi-rail power sequencing in ATCA, ATX, and custom processor boards. Multiple supply rails (core, I/O, analog, DRAM) must be enabled in a specific order with defined timing margins to prevent latch-up. The CPLD implements sequenced enable outputs, watchdog timers, and fault signaling in deterministic logic, immune to the brown-out races that plague discrete RC-sequenced circuits. Its 201.1 MHz fMAX easily supports fine-grained sequencing timing.

Recommandé

EPM240GT100C5N · Altera

💡

LED Control & Display Driving

Commercial LED walls, RGBW lighting controllers, and architectural displays use the EPM240T100C5N to drive 80 PWM channels simultaneously for color mixing and brightness control. Its 192 macro cells implement multiple PWM generators with phase-shift, dead-band, and fault-handling logic in parallel - no software overhead. MultiVolt I/O banks drive 3.3 V LED-driver ICs directly, and the 100-pin TQFP package is hand-solderable for prototype fixtures. The CPLD's deterministic timing eliminates flicker from software jitter.

Recommandé

EPM1270T144C5N · Altera

🖥️

Bus Interface Bridging

Legacy industrial and embedded systems use the EPM240T100C5N to bridge between incompatible bus interfaces (PCI to local bus, parallel to I2C/SPI, address decoding across memory maps). Its 192 macro cells implement stateful protocol converters and decode logic with deterministic latency - critical for real-time control where software stacks are too slow or unpredictable. JTAG ISP allows field firmware updates without removing boards from service, and the 100-pin TQFP fits legacy footprint-compatible daughter-card designs.

Recommandé

EPM570T100C5N · Intel

Récapitulatif des produits recommandés

EPM240T100I5N Intel Utilisé dans : I/O Expansion & Voltage Translation, Telecom & Networking Line Cards EPM240GT100C5N Altera Utilisé dans : I/O Expansion & Voltage Translation, Telecom & Networking Line Cards, Power Sequencing & Housekeeping EPM1270T144C5N Altera Utilisé dans : Industrial Control & Glue Logic, LED Control & Display Driving EPM570T100C5N Intel Utilisé dans : Industrial Control & Glue Logic, Bus Interface Bridging

What is the operating voltage of EPM240T100C5N?

The EPM240T100C5N operates from a single 3.3 V core supply (VCCINT) with MultiVolt I/O banks supporting 1.5 V, 1.8 V, 2.5 V, and 3.3 V signaling, per the Altera MAX II Device Handbook. This single-rail core + multi-rail I/O design eliminates the need for separate 2.5 V and 3.3 V regulators in mixed-voltage designs, simplifying board power architecture.

How many logic elements and macro cells does EPM240T100C5N have?

The EPM240T100C5N contains 240 logic elements organized into 192 macro cells. Each macro cell combines a 4-input look-up table (LUT), a programmable register, and dedicated carry/control logic, giving the device roughly 192 flip-flops plus combinational capacity - sufficient for typical glue-logic, address-decoding, and state-machine workloads but well below mid-range FPGA density.

What package does EPM240T100C5N use?

The EPM240T100C5N ships in a 100-pin TQFP (Thin Quad Flat Pack) package, with 80 user I/O pins available for application use. The 100-pin TQFP is a low-cost, hand-solderable, and socket-compatible footprint shared across multiple MAX II densities (EPM240, EPM570, EPM1270, EPM2210), enabling PCB reuse when logic requirements grow.

Where to buy EPM240T100C5N at the best price?

As of 2026-09-12, the EPM240T100C5N is in stock at DigiKey (part 544-1964-ND) at approximately $6.85 in single-piece quantity with volume breaks to roughly $4.20 at 1,000 pieces. Mouser and major authorized distributors also stock the part; lead time is typically 6-12 weeks for factory-direct orders. Independent distributors may quote lower but carry authenticity risk - always verify lot traceability.

What is the lead time for EPM240T100C5N?

As of 2026-09-12, factory-direct lead time for the EPM240T100C5N is approximately 8-12 weeks per Altera/Intel distributor listings, with distributor shelf stock available immediately in single-piece to a few-hundred-piece quantities. For high-volume orders (greater than 5,000 units), the orderable lead time typically extends to 14-16 weeks due to MAX II being on a mature, long-lifecycle process node.

What is the difference between EPM240T100C5N and EPM240T100I5N?

The EPM240T100C5N is the commercial temperature-grade variant (0 °C to +85 °C) while the EPM240T100I5N is the industrial temperature-grade variant (-40 °C to +100 °C). Both share the identical 100-pin TQFP package, 192 macro cells, and 201.1 MHz fMAX, making the EPM240T100I5N a drop-in thermal upgrade when applications require extended cold-temperature operation.

EPM240T100C5N vs EPM240GT100C5N - which is better for low-power designs?

The EPM240GT100C5N is the MAX II G variant featuring zero-power technology with lower static current (typically 2 mA vs. higher in standard MAX II) and additional power-saving features, per Intel/Altera datasheets. For battery-backed or always-on applications, the G variant is preferred; for standard industrial glue logic where power is not critical, the standard EPM240T100C5N is the more cost-effective choice with identical logic density.

When should I choose EPM240T100C5N over EPM1270T144C5N?

Choose the EPM240T100C5N when your design fits within 192 macro cells / 240 logic elements and you want the lowest per-unit cost in the 100-pin TQFP footprint. Choose the EPM1270T144C5N when you need 980 logic elements, 116 user I/Os, or 144-pin TQFP headroom for future expansion - but note the 144-pin TQFP is a different footprint requiring PCB layout changes.

What is the best drop-in replacement for EPM240T100C5N?

The best drop-in replacement is the EPM240T100I5N, which shares the identical 100-pin TQFP footprint, 192 macro cells, and 201.1 MHz fMAX but extends the operating temperature range to -40 °C to +100 °C industrial grade. The EPM240GT100C5N is also pin-compatible with lower static power consumption. Both are listed in XAIPART's Site MPN database for direct cross-reference.

Is there an equivalent alternative to EPM240T100C5N from another brand?

Direct cross-brand pin-compatible equivalents for the EPM240T100C5N (100-pin TQFP, MAX II architecture, 192 macro cells) are limited because MAX II's instant-on non-volatile architecture is proprietary to Intel/Altera. Xilinx CoolRunner-II family parts (XC2C64A, XC2C128, XC2C256) target similar density ranges and I/O counts in 100-pin TQFP packages, but require complete design re-synthesis due to differing architectures and toolchains.

Where can I download the EPM240T100C5N datasheet PDF?

The EPM240T100C5N datasheet PDF can be downloaded from the Altera Semiconductor archive (alterasemi.com) at the URL https://www.alterasemi.com/datasheet/alterasemi/EPM240T100C5N.pdf, or from the original Alldatasheet mirror. Intel's official MAX II Device Handbook (Section I) is the authoritative reference for DC/AC electrical characteristics, timing, and pinout.

Where is the EPM240T100C5N pinout defined?

The EPM240T100C5N pinout is defined in the Altera MAX II Device Handbook Section I, available as a multi-section PDF. Pin 1 is located at the top-left of the 100-pin TQFP package when the orientation marker is in the upper-left; standard pin assignments are documented in the device datasheet's 'Pin Information' table, with VCCINT/VCCIO and GND pins on multiple sides for robust power delivery.

Does EPM240T100C5N require an external configuration memory?

No, the EPM240T100C5N does not require an external configuration memory. As a MAX II non-volatile flash-based CPLD, configuration is stored on-chip and the device powers up in a defined functional state within microseconds, eliminating the boot PROM required by SRAM FPGAs. Programming is performed via the JTAG interface (IEEE 1149.1) using Quartus Prime and the Altera USB-Blaster cable.

What software is required to program the EPM240T100C5N?

The EPM240T100C5N is programmed using Intel Quartus Prime design software (Web Edition is free and supports MAX II), combined with the Altera USB-Blaster or compatible JTAG download cable. The toolchain handles Verilog/VHDL synthesis, place-and-route, timing analysis, and JTAG programming; older Quartus II versions (13.0 and earlier) also support MAX II but may lack newer device support.

What are the key specifications of EPM240T100C5N that engineers should know?

The EPM240T100C5N is a MAX II instant-on non-volatile CPLD with 192 macro cells, 240 logic elements, 80 user I/Os, 8 Kbits of user flash, and fMAX of 201.1 MHz, fabricated on 0.18 µm flash process in a 100-pin TQFP. It supports MultiVolt I/O (1.5 V / 1.8 V / 2.5 V / 3.3 V) from a 3.3 V core supply, JTAG ISP per IEEE 1149.1, and zero standby power in commercial grade - the lowest-cost entry point into the MAX II family.

Données de référence d'ingénierie pour EPM240T1OOC5N — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the EPM240T100C5N when you need the lowest-cost MAX II CPLD with 192 macro cells, 80 user I/Os, and 100-pin TQFP footprint for commercial-temperature (0-85 °C) glue-logic, I/O expansion, and bus-bridging applications. Choose the EPM240T100I5N if your design must operate from -40 °C to +100 °C industrial temperature range - same pinout, same die. Choose the EPM240GT100C5N if you need the zero-power G variant for always-on battery-backed designs (lower static IQ). Choose the EPM570T100C5N when logic exceeds 192 macro cells but you want to retain the same 100-pin TQFP PCB layout (vertical migration per MAX II datasheet). Choose Xilinx XC2C64A or XC2C128 for cross-brand sourcing flexibility, but only if you can absorb the toolchain switch to Xilinx ISE/Vivado and design re-synthesis. All five parts share the 100-pin TQFP footprint, enabling PCB reuse across commercial/industrial/zero-power/vertical-migration variants.

Comparaison avec les alternatives

Paramètre	Ce produit	EPM240T100I5N	EPM240GT100C5N	EPM240T100C4N	EPM570T100C5N	XC2C64A-7VQG100C	XC2C128-7VQG100C
Package	100-pin TQFP	100-pin TQFP - same	100-pin TQFP - same	100-pin TQFP - same	100-pin TQFP - same	100-pin VQFP (VQ100)	100-pin VQFP (VQ100)
Brand	Intel (Altera)	Intel (Altera)	Intel (Altera)	Intel (Altera)	Intel (Altera)	Xilinx (AMD)	Xilinx (AMD)
Macro Cells	192	192	192	192	440	64	128
Max User I/O	80	80	80	80	76	64	80
Operating Temperature	0 °C to +85 °C (commercial)	-40 °C to +100 °C (industrial)	0 °C to +85 °C	0 °C to +85 °C	0 °C to +85 °C	0 °C to +70 °C	0 °C to +70 °C
Configuration Memory	8 Kbit user flash (on-chip, instant-on)	8 Kbit flash, instant-on	8 Kbit flash, instant-on, zero-power	8 Kbit flash, instant-on	8 Kbit flash, instant-on	NV flash, instant-on (CoolRunner-II)	NV flash, instant-on (CoolRunner-II)
Supply Voltage	3.3 V core + MultiVolt I/O (1.5/1.8/2.5/3.3 V)	3.3 V core + MultiVolt I/O	3.3 V core + MultiVolt I/O	3.3 V core + MultiVolt I/O	3.3 V core + MultiVolt I/O	1.8 V core (lower voltage)	1.8 V core (lower voltage)

Principaux différenciateurs

Lowest-cost entry point in MAX II family with full 80-I/O support (vs EPM570T100C5N)
Same-footprint temperature-grade flexibility (vs EPM240T100I5N)
Cross-brand footprint compatibility via CoolRunner-II (vs XC2C64A-7VQG100C)

Notes de conception

Estimated: The EPM240T100C5N's 3.3 V core supply (VCCINT) typically draws 30-50 mA ICCINT in active operation with all 80 I/Os switching at 50 MHz. Decouple VCCINT with at least one 0.1 µF ceramic capacitor placed within 100 mils of pin 79 (VCCINT) and pin 80 (GND), plus a 10 µF bulk capacitor on the supply rail. VCCIO1/VCCIO2/VCCIO3/VCCIO4 (pins 23, 42, 62, 85) each power an independent I/O bank and may be driven from separate rails (1.5 V / 1.8 V / 2.5 V / 3.3 V) - each requires its own 0.1 µF decoupling cap to its bank GND.

Place all decoupling capacitors as close to their respective VCCINT/VCCIO pins as possible. Route JTAG signals (TDI, TMS, TCK, TDO on pins 75-78) with short, parallel traces to the JTAG header - keep trace length below 2 inches to maintain signal integrity at TCK rates up to 33 MHz. Avoid routing high-speed signals (above 50 MHz) under the device or near analog power sections; the 100-pin TQFP has adequate ground pins (6 GND pins distributed around the package) for a solid ground flood in the inner layer.

Do not leave unused I/O pins floating - configure them as outputs driving low (or inputs with internal pull-up enabled) in the Quartus Prime pin-assignment file to minimize power consumption and noise susceptibility. Avoid exceeding 3.6 V on any VCCIO pin; the absolute-maximum VCCIO is 3.6 V even though recommended operation is 3.3 V. When using JTAG for ISP, ensure the JTAG chain does not include devices that hold TCK low at power-up, which can prevent the CPLD from entering programming mode.

Estimated: The 100-pin TQFP package has a theta_JA of approximately 45 °C/W (with still-air, no heatsink) to 30 °C/W (with adequate PCB copper). At full-load operation (all 80 I/Os switching at maximum toggle rate) the device may dissipate up to 200 mW, resulting in a junction-temperature rise of ~9 °C above ambient - well within commercial-grade limits. For thermal-margin-constrained designs, add a ground-pour copper area (minimum 1 square inch) under the package to drop theta_JA.

Informations de conformité

RoHS

Compliant

REACH

Compliant

AEC-Q100

Not Applicable

Sans plomb

Yes

Sans halogène

Unknown

Minerais de conflit

Compliant

RoHS and lead-free status confirmed per Altera/Intel product page. AEC-Q100 not applicable (CPLD is not an automotive-qualified IC). Halogen-free status not explicitly stated in datasheet - set to unknown.

Données vérifiées le : 2026-09-12 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Sources : Manufacturer Datasheet, Distributor, Distributor, Octopart, Manufacturer Datasheet, Internal Db, Manufacturer Product Page

Recherches associées

EPM240T100C5N EPM240T100C5N datasheet MAX II CPLD 192 macro cells Altera EPM240T100C5N 100-pin TQFP CPLD 3.3V EPM240T100C5N vs EPM240T100I5N EPM240T100C5N drop-in replacement EPM240T100C5N buy price CPLD glue logic 80 I/O industrial non-volatile CPLD instant-on JTAG MAX II Quartus Prime programming EPM240T100C5N pinout 100 TQFP low-power MAX II G CPLD alternative where to buy EPM240T100C5N online what is the difference between MAX II and MAX V

Composants & termes associés

Intel Altera EPM240T100C5N MAX II CPLD Complex Programmable Logic Device 192 macro cells logic elements 100-pin TQFP 0.18 µm flash process JTAG IEEE 1149.1 in-system programmability MultiVolt I/O Quartus Prime USB-Blaster vertical migration RoHS instant-on non-volatile EPM570T100C5N EPM1270T144C5N XC2C64A CoolRunner-II