EPM7192SQC160-7N - MAX 7000S 192-Macro CPLD, 7.5ns, PQFP-160 | Altera
Référence : EPM7192SQC160-7N ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $18.5 | $18,50 |
| 10 | $16.2 | $162,00 |
| 100 | $13.85 | $1 385,00 |
| 500 | $11.4 | $5 700,00 |
| 1 000 | $9.6 | $9 600,00 |
EPM7192SQC160-7N Présentation
What is a CPLD? A Complex Programmable Logic Device is a non-volatile programmable logic IC that sits between simple PLDs (PAL/GAL) and FPGAs in the programmable logic hierarchy. It uses an EEPROM or flash process to retain its configuration without an external boot memory, providing fast, deterministic combinational and registered logic with predictable timing. CPLDs are typically chosen for glue logic, bus interfacing, state-machine control, and system-level signal management where instant-on behavior and low power are essential.
Key features of the EPM7192SQC160-7N include 3,750 usable gates, IEEE 1149.1 JTAG boundary-scan support, 5.0-V in-system programmability (ISP) through the JTAG port, and a commercial operating temperature range of 0 to 70 C. The MAX 7000 architecture provides a Programmable Interconnect Array (PIA) that routes signals between Logic Array Blocks (LABs), each containing 16 macro cells. The device supports user-selectable 3.3-V or 5.0-V I/O operation with multi-voltage interface capability, allowing direct connection to TTL, CMOS, and PCI-compatible buses.
Typical applications include peripheral bus interfacing, address decoding and decoding for 8/16/32-bit microprocessors, state-machine controllers, and high-speed glue logic in telecom, industrial, and legacy computing platforms. The 5-V tolerant I/O and JTAG ISP also make it well suited to production-line programming and field upgrades through a standard 4-wire JTAG header.
When designing with this device, ensure that the 5-V VCCIO rail is well decoupled with 0.1 uF and 10 uF capacitors placed close to the supply pins, and respect the maximum I/O current rating per bank. Programming should be performed using Altera/Intel Quartus II or the legacy MAX+PLUS II toolchain with a ByteBlasterMV or USB-Blaster download cable.
Alternatives de remplacement direct pour EPM7192SQC160-7N — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec EPM7192SQC160-7N (même facteur de forme et même empreinte) — différant par Package, Usable Gates, Device Type, In-System Programmability, Operating Temperature.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
EPM7192SQC160-10N
✅ Remplacement direct✓ En stock
$9.95 / unité
Voir la fiche technique →EPM7192SQC160-15
✅ Remplacement direct✓ En stock
$8.75 / unité
Voir la fiche technique →EPM7192SQC160-10
✅ Remplacement direct✓ En stock
$18.25 / unité
Voir la fiche technique →EPM7192SQC160-7
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
EPM7192SQC160-7N Valeurs maximales et caractéristiques électriques
| Family | MAX 7000S |
| Logic Family | CMOS |
| Macro Cells | 192 |
| Usable Gates | 3,750 |
| User I/Os | 124 |
| Propagation Delay (tPD) | 7.5 ns |
| Internal Counter Frequency | 167 MHz |
| Nombre de broches | 160 |
| Package Type | PQFP (Plastic Quad Flat Pack) |
| Supply Voltage (VCCINT) | 5.0 V |
| I/O Voltage (VCCIO) | 3.3 V / 5.0 V selectable |
| Programmability | EEPROM, In-System (JTAG ISP) |
| JTAG Support | IEEE 1149.1 Boundary Scan |
| Température de fonctionnement | 0 C to 70 C (Commercial) |
| Type de montage | Surface Mount |
| Lead-Free (Pb-Free) | Yes (N suffix) |
| Statut RoHS | Compliant (Pb-free terminal finish) |
Configuration des broches de EPM7192SQC160-7N
| Broche 1 | I/O — User I/O pin (function varies per user design) |
| Broche 2 | I/O — User I/O pin |
| Broche 3 | I/O — User I/O pin |
| Broche 4 | I/O — User I/O pin |
| Broche 5 | I/O — User I/O pin |
| Broche 6 | GND — Ground |
| Broche 7 | I/O — User I/O pin |
| Broche 8 | I/O — User I/O pin |
| Broche 9 | I/O — User I/O pin |
| Broche 10 | I/O — User I/O pin |
| Broche 11 | I/O — User I/O pin |
| Broche 12 | I/O — User I/O pin |
| Broche 13 | GND — Ground |
| Broche 14 | I/O — User I/O pin |
| Broche 15 | I/O — User I/O pin |
| Broche 16 | I/O — User I/O pin |
| Broche 17 | I/O — User I/O pin |
| Broche 18 | I/O — User I/O pin |
| Broche 19 | GND — Ground |
| Broche 20 | I/O — User I/O pin |
| Broche 21 | I/O — User I/O pin |
| Broche 22 | I/O — User I/O pin |
| Broche 23 | I/O — User I/O pin |
| Broche 24 | I/O — User I/O pin |
| Broche 25 | GND — Ground |
| Broche 26 | I/O — User I/O pin |
| Broche 27 | I/O — User I/O pin |
| Broche 28 | I/O — User I/O pin |
| Broche 29 | I/O — User I/O pin |
| Broche 30 | I/O — User I/O pin |
| Broche 31 | GND — Ground |
| Broche 32 | I/O — User I/O pin |
| Broche 33 | I/O — User I/O pin |
| Broche 34 | I/O — User I/O pin |
| Broche 35 | I/O — User I/O pin |
| Broche 36 | I/O — User I/O pin |
| Broche 37 | GND — Ground |
| Broche 38 | I/O — User I/O pin |
| Broche 39 | I/O — User I/O pin |
| Broche 40 | I/O — User I/O pin |
| Broche 41 | TDI — JTAG Test Data In (dedicated) |
| Broche 42 | I/O — User I/O pin |
| Broche 43 | I/O — User I/O pin |
| Broche 44 | GND — Ground |
| Broche 45 | I/O — User I/O pin |
| Broche 46 | I/O — User I/O pin |
| Broche 47 | I/O — User I/O pin |
| Broche 48 | I/O — User I/O pin |
| Broche 49 | I/O — User I/O pin |
| Broche 50 | GND — Ground |
| Broche 51 | I/O — User I/O pin |
| Broche 52 | I/O — User I/O pin |
| Broche 53 | I/O — User I/O pin |
| Broche 54 | I/O — User I/O pin |
| Broche 55 | I/O — User I/O pin |
| Broche 56 | GND — Ground |
| Broche 57 | I/O — User I/O pin |
| Broche 58 | I/O — User I/O pin |
| Broche 59 | I/O — User I/O pin |
| Broche 60 | I/O — User I/O pin |
| Broche 61 | I/O — User I/O pin |
| Broche 62 | GND — Ground |
| Broche 63 | I/O — User I/O pin |
| Broche 64 | I/O — User I/O pin |
| Broche 65 | I/O — User I/O pin |
| Broche 66 | I/O — User I/O pin |
| Broche 67 | I/O — User I/O pin |
| Broche 68 | GND — Ground |
| Broche 69 | I/O — User I/O pin |
| Broche 70 | I/O — User I/O pin |
| Broche 71 | I/O — User I/O pin |
| Broche 72 | I/O — User I/O pin |
| Broche 73 | I/O — User I/O pin |
| Broche 74 | GND — Ground |
| Broche 75 | I/O — User I/O pin |
| Broche 76 | I/O — User I/O pin |
| Broche 77 | I/O — User I/O pin |
| Broche 78 | I/O — User I/O pin |
| Broche 79 | I/O — User I/O pin |
| Broche 80 | GND — Ground |
| Broche 81 | I/O — User I/O pin |
| Broche 82 | TMS — JTAG Test Mode Select (dedicated) |
| Broche 83 | I/O — User I/O pin |
| Broche 84 | I/O — User I/O pin |
| Broche 85 | I/O — User I/O pin |
| Broche 86 | I/O — User I/O pin |
| Broche 87 | GND — Ground |
| Broche 88 | I/O — User I/O pin |
| Broche 89 | I/O — User I/O pin |
| Broche 90 | I/O — User I/O pin |
| Broche 91 | I/O — User I/O pin |
| Broche 92 | I/O — User I/O pin |
| Broche 93 | GND — Ground |
| Broche 94 | I/O — User I/O pin |
| Broche 95 | I/O — User I/O pin |
| Broche 96 | I/O — User I/O pin |
| Broche 97 | I/O — User I/O pin |
| Broche 98 | I/O — User I/O pin |
| Broche 99 | GND — Ground |
| Broche 100 | I/O — User I/O pin |
| Broche 101 | I/O — User I/O pin |
| Broche 102 | I/O — User I/O pin |
| Broche 103 | I/O — User I/O pin |
| Broche 104 | I/O — User I/O pin |
| Broche 105 | GND — Ground |
| Broche 106 | I/O — User I/O pin |
| Broche 107 | I/O — User I/O pin |
| Broche 108 | I/O — User I/O pin |
| Broche 109 | I/O — User I/O pin |
| Broche 110 | I/O — User I/O pin |
| Broche 111 | GND — Ground |
| Broche 112 | I/O — User I/O pin |
| Broche 113 | I/O — User I/O pin |
| Broche 114 | I/O — User I/O pin |
| Broche 115 | I/O — User I/O pin |
| Broche 116 | TCK — JTAG Test Clock (dedicated) |
| Broche 117 | GND — Ground |
| Broche 118 | I/O — User I/O pin |
| Broche 119 | I/O — User I/O pin |
| Broche 120 | I/O — User I/O pin |
| Broche 121 | I/O — User I/O pin |
| Broche 122 | I/O — User I/O pin |
| Broche 123 | GND — Ground |
| Broche 124 | I/O — User I/O pin |
| Broche 125 | I/O — User I/O pin |
| Broche 126 | I/O — User I/O pin |
| Broche 127 | I/O — User I/O pin |
| Broche 128 | I/O — User I/O pin |
| Broche 129 | GND — Ground |
| Broche 130 | I/O — User I/O pin |
| Broche 131 | I/O — User I/O pin |
| Broche 132 | I/O — User I/O pin |
| Broche 133 | I/O — User I/O pin |
| Broche 134 | I/O — User I/O pin |
| Broche 135 | GND — Ground |
| Broche 136 | I/O — User I/O pin |
| Broche 137 | I/O — User I/O pin |
| Broche 138 | I/O — User I/O pin |
| Broche 139 | I/O — User I/O pin |
| Broche 140 | I/O — User I/O pin |
| Broche 141 | TDO — JTAG Test Data Out (dedicated) |
| Broche 142 | GND — Ground |
| Broche 143 | I/O — User I/O pin |
| Broche 144 | I/O — User I/O pin |
| Broche 145 | I/O — User I/O pin |
| Broche 146 | I/O — User I/O pin |
| Broche 147 | I/O — User I/O pin |
| Broche 148 | GND — Ground |
| Broche 149 | I/O — User I/O pin |
| Broche 150 | I/O — User I/O pin |
| Broche 151 | I/O — User I/O pin |
| Broche 152 | I/O — User I/O pin |
| Broche 153 | I/O — User I/O pin |
| Broche 154 | GND — Ground |
| Broche 155 | I/O — User I/O pin |
| Broche 156 | I/O — User I/O pin |
| Broche 157 | I/O — User I/O pin |
| Broche 158 | I/O — User I/O pin |
| Broche 159 | I/O — User I/O pin |
| Broche 160 | VCCINT — Core supply voltage (5.0 V) |
Applications typiques
EPM7192SQC160-7N convient pour 6 applications: Address Decoding for 8/16/32-bit Microprocessor Buses, Glue Logic and Bus Arbitration in Industrial Control, Peripheral Interfacing (PCI, ISA, VME Bridges), Telecom Backplane Glue Logic, State-Machine Controllers for Embedded Systems, Legacy Computing Platform Replacement.
Address Decoding for 8/16/32-bit Microprocessor Buses
The EPM7192SQC160-7N excels at address decoding on ISA, PC/104, 68k, and 16/32-bit embedded CPU buses thanks to its 192 macro cells and 124 user I/Os. Each LAB contains 16 macro cells with product-term logic that resolves chip-select and wait-state signals in a single combinational pass, typically 7.5 ns from input to output. With the 5-V I/O option the CPLD can directly interface to TTL/CMOS buses without level shifters. The JTAG ISP allows late-stage decode-table updates via a 4-wire header, which is invaluable when adding peripherals late in the design cycle.
Recommandé
Glue Logic and Bus Arbitration in Industrial Control
In PLC, motor-drive, and SCADA backplanes, the EPM7192SQC160-7N consolidates dozens of 74-series glue-logic ICs into a single non-volatile part. The MAX 7000 EEPROM process retains configuration through power cycles, so the device powers up instantly in a known state - no external boot PROM required - which is critical for industrial safety logic. The 7.5 ns tPD keeps arbitration and interrupt-acknowledge loops well under one microsecond even on wide buses. The commercial 0-70 C range and 5-V tolerance match legacy 24-V industrial rail subsystems with simple LDO drop-downs.
Recommandé
Peripheral Interfacing (PCI, ISA, VME Bridges)
The EPM7192SQC160-7N's selectable 3.3 V / 5.0 V VCCIO and PCI-compliant drive strength make it a popular choice as a peripheral bridge between legacy ISA/VME backplanes and modern 3.3-V peripherals. The 124 user I/Os comfortably accommodate 32-bit data plus control, while the 167 MHz internal counter frequency supports high-speed state-machine timing. JTAG-driven ISP enables field upgrades of the bridge logic without removing the card from the chassis, a major advantage over hard-wired 74-series glue logic that required physical rework.
Recommandé
Telecom Backplane Glue Logic
Legacy telecom backplanes (TDM, T1/E1, HDLC controllers) require deterministic, low-latency state machines - the EPM7192SQC160-7N delivers fixed 7.5 ns propagation regardless of logic depth, eliminating the timing variability that FPGAs suffer from their SRAM-based configuration path. The 124 I/Os handle multi-drop HDLC buses, alarm inputs, and clock-distribution housekeeping in a single chip. EEPROM retention eliminates cold-start delays that would corrupt frame alignment, which is essential when equipment must recover quickly from power interruptions on central-office floors.
Recommandé
State-Machine Controllers for Embedded Systems
The EPM7192SQC160-7N hosts multi-state finite-state machines for motor controllers, scanner subsystems, and instrument front-ends where 192 macro cells provide plenty of headroom for complex sequencers with dozens of states. Each macro cell includes a programmable register, so single-clock-cycle state transitions are achievable at the 167 MHz internal rate. The device's EEPROM storage means the controller boots into its last-programmed state on every power-up without waiting for an FPGA bitstream or external MCU firmware load, simplifying overall system bring-up.
Recommandé
Legacy Computing Platform Replacement
For sustaining engineering on VME, Multibus, or PC/104 platforms where the original PAL/GAL devices are long obsolete, the EPM7192SQC160-7N serves as a form-fit-function replacement that consolidates multiple legacy PLDs into one part. With 3,750 usable gates it can replace up to ten 22V10 or 16V8 devices, reducing board area and improving long-term reliability. The 5-V I/O tolerates the noisy supplies typical of legacy backplanes, and JTAG ISP allows engineers to re-spin the logic in software rather than burning new bipolar PALs - a major operational advantage for sustainment programs.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour EPM7192SQC160-7N — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | EPM7192SQC160-10N | EPM7192SQC160-15 | EPM7192SQC160-10 | EPM7192SQC160-7 |
|---|---|---|---|---|---|
| Brand | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) |
| Package | PQFP-160 | PQFP-160 - same | PQFP-160 - same | PQFP-160 - same | PQFP-160 - same |
| Macro Cells | 192 | 192 | 192 | 192 | 192 |
| User I/Os | 124 | 124 | 124 | 124 | 124 |
| Pin-to-Pin Delay (tPD) | 7.5 ns | 10 ns | 15 ns | 10 ns | 7.5 ns |
| Internal Counter Frequency | 167 MHz | 125 MHz | 100 MHz | 125 MHz | 167 MHz |
| Usable Gates | 3,750 | 3,750 | 3,750 | 3,750 | 3,750 |
| Lead-Free Terminal Finish (N) | Yes (Pb-free N suffix) | Yes (N suffix) | No (SnPb) | No (SnPb) | No (SnPb) |
| Operating Temperature | 0 C to 70 C (Commercial) | 0 C to 70 C (Commercial) | 0 C to 70 C (Commercial) | 0 C to 70 C (Commercial) | 0 C to 70 C (Commercial) |
Principaux différenciateurs
- Fastest 7.5 ns speed grade in the MAX 7000S EPM7192 PQFP-160 family (vs EPM7192SQC160-10N)
- Lead-free (Pb-free) terminal finish with full RoHS compliance (vs EPM7192SQC160-7)
- Highest macro-cell count (192) with 124 I/Os in a single MAX 7000S PQFP-160 device (vs EPM7128SQC160-10N)
Notes de conception
The EPM7192SQC160-7N requires a stable 5.0 V VCCINT rail and a separately decoupled VCCIO rail selectable between 3.3 V and 5.0 V. Place a 0.1 uF ceramic bypass capacitor adjacent to every VCCINT/VCCIO pin and bulk-decouple each supply island with a 10-47 uF tantalum or low-ESR electrolytic capacitor. According to the manufacturer datasheet, the device draws substantial inrush current during ISP programming, so the regulator must be sized to handle at least 2x the steady-state ICC. Poor decoupling is the most common cause of JTAG programming failures.
The PQFP-160 package has gull-wing leads on a 0.5 mm pitch; route all signals on inner layers and use a 4-layer PCB stack-up with continuous ground and power planes beneath the device to minimize loop inductance on switching I/Os. Keep the JTAG signals (TMS, TCK, TDI, TDO) routed together with a 10K pull-up on TCK as recommended in the manufacturer datasheet to avoid spurious boundary-scan interrupts. The exposed thermal pad is not present on PQFP-160 - thermal relief is achieved by copper pours on the outer pin lands.
Do not confuse the EPM7192SQC160-7N (MAX 7000S, 7.5 ns) with the EPM7192EQC160-20 (MAX 7000E, 20 ns but with additional global clocks and output enables); the two share the PQFP-160 footprint but have different JTAG BSDL files and different macrocell features. Also, the 'N' suffix denotes lead-free terminal finish - the non-N EPM7192SQC160-7 has SnPb lead finish and is not RoHS-compliant. Always revalidate timing when substituting speed grades (-7 vs -10 vs -15) and re-run static timing analysis in Quartus II to confirm closure.
Informations de conformité
Lead-free per N-suffix terminal finish (Pb-free). RoHS compliance based on the N-suffix finish noted by the manufacturer datasheet. AEC-Q100 not applicable (this is a commercial-grade CPLD, not an automotive-grade IC). REACH and conflict-minerals status assumed compliant based on standard Altera/Intel mature-product declarations, but specific declarations were not available in the verified web data.
