Texas Instruments

INA105KUG4 - 1MHz Unity-Gain Differential Amplifier | Texas Instruments

Référence : INA105KUG4 ✓ Actif
8-pin SOIC, 3.90 mm width Package
MOQ : 1 |

INA105KUG4 Présentation

Texas Instruments INA105KUG4 is a precision unity-gain differential amplifier with a 1 MHz -3 dB bandwidth, a 3 V/µs slew rate, and an 8-pin SOIC package. It combines a precision operational amplifier with an on-chip, laser-trimmed metal-film resistor network to provide accurate gain and high common-mode rejection.

A differential amplifier measures the voltage difference between two input signals while rejecting signals common to both inputs. This INA105 unity-gain device belongs to the differential-amplifier category, where it sits between precision operational amplifiers and instrumentation-amplifier signal-conditioning circuits. Its fixed unity gain makes it useful when the source already provides the required scaling and the system primarily needs accurate differential sensing.

The principal feature of the INA105KUG4 is its integrated gain-setting network. Laser trimming provides accurate nominal gain and consistent resistor tracking. Because the network is formed on the same monolithic die as the operational amplifier, it eliminates the need for a discrete precision resistor pair in applications where equal-gain differential conversion is required.

The manufacturer describes the INA105 as a monolithic Gain = 1 differential amplifier built around a precision operational amplifier and an on-chip metal-film resistor network. Laser trimming supports accurate gain and common-mode rejection, while the matched temperature coefficient of the network helps preserve performance as temperature changes. The specified 1 MHz -3 dB bandwidth provides useful speed for instrumentation and industrial signal chains.

Typical uses include bridge-sensor signal conditioning, current-sense amplifier output filtering, differential measurement interfaces, and analog front ends that compare two sensor channels. The 3 V/µs slew rate supports accurate reproduction of moderate-frequency differential waveforms, while unity gain lets engineers retain the source voltage without introducing an additional gain error.

Layout should preserve the differential nature of the device by routing input pairs as closely as practical, minimizing parasitic mismatches between the two signal paths. The 8-pin SOIC package also requires adequate decoupling and careful grounding around the reference and supply pins. Review the pin-description and typical-application diagrams in the manufacturer datasheet before assigning PCB tracks.

This product page combines the manufacturer specifications, package information, sourcing guidance, drop-in alternatives, comparison parameters, and practical design notes. It is intended to help engineers determine whether the INA105KUG4's fixed unity gain, differential architecture, bandwidth, slew rate, and integrated precision network fit a particular instrumentation or signal-conditioning design.

Alternatives de remplacement direct pour INA105KUG4 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec INA105KUG4 (même facteur de forme et même empreinte) — différant par Mounting Type, Package.

Texas Instruments
Mounting Type: Through-hole / DIP
Package: 8-pin PDIP (P package), through-hole
Comparer avec INA105KUG4 →

INA105U

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 8-SOIC
Same unity-gain INA105 family and 8-SOIC footprint; commercial ordering and temperature-grade details differ by 0%, requiring suffix verification

📋 Alternative de référence (hors catalogue)

INA105KP

✅ Remplacement direct ⚠️ Spécifications non vérifiées
Texas Instruments
📦 8-SOIC
Precision unity-gain differential amplifier (1 circuit) · 1.000 (unity, fixed) · 1 MHz · 500 uV · 86 dB · 10 V to 36 V (single 5 V to 36 V, dual +/-5 V to +/-18 V) · -20 V

Contactez-nous pour le prix

Voir la fiche technique →

INA105UA

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 8-SOIC
Same unity-gain INA105 family and 8-SOIC footprint; ordering suffix differs while core bandwidth and slew-rate ratings remain unchanged

📋 Alternative de référence (hors catalogue)

AD8271BRZ

✅ Remplacement direct
📦 8-SOIC
Cross-brand unity-gain differential amplifier in the same 8-SOIC footprint; nominal gain and signal-path ratings are comparable, while exact electrical limits require verification

📋 Alternative de référence (hors catalogue)

AD8210JRZ

✅ Remplacement direct
📦 8-SOIC
Cross-brand 8-SOIC differential amplifier with a comparable 3 V/µs slew rate; bandwidth and common-mode performance differ and must be checked against the original circuit

📋 Alternative de référence (hors catalogue)

INA105KUG4 Valeurs maximales et caractéristiques électriques

Amplifier Type Monolithic unity-gain differential amplifier
Nominal Gain 1 V/V
Number of Circuits 1 circuit
-3 dB Bandwidth 1 MHz
Slew Rate 3 V/µs
Internal Amplifier Precision operational amplifier
Gain Network On-chip metal-film resistor network
Network Calibration Laser trimmed
Boîtier 8-pin SOIC, 3.90 mm width
Type de montage Surface mount

Guide de configuration des broches du INA105KUG4 8-pin soic, 3.90 mm width

Configuration des broches du INA105KUG4 (boîtier 8-pin soic, 3.90 mm width). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier 8-pin soic, 3.90 mm width pour le INA105KUG4

Aucune donnée de brochage détaillée disponible pour INA105KUG4.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

INA105KUG4 convient pour 6 applications: Bridge-Sensor Signal Conditioning, Current-Measurement Front End, Differential Voltage Measurement, Industrial Sensor Interface, Audio and Analog Difference Sensing, Portable Instrument Signal Conditioning.

🏭

Bridge-Sensor Signal Conditioning

The INA105KUG4 is well suited to converting the small differential output of a resistive bridge into a single-ended measurement signal. Its unity-gain architecture preserves the bridge differential while its laser-trimmed metal-film network supports accurate gain and high common-mode rejection. The 1 MHz -3 dB bandwidth handles sensors whose mechanical or thermal response falls well below that limit, while the 3 V/µs slew rate permits rapid output transitions. The bridge excitation, input common-mode voltage, and allowable output swing must remain inside the device operating limits.

⚡

Current-Measurement Front End

The INA105KUG4 can form the differential input stage of a current-measurement front end when a shunt or current-sense amplifier presents two closely related voltage signals. A fixed gain of 1 V/V avoids adding another scaling stage, and the integrated precision resistor network reduces mismatch between the two input paths. With a 1 MHz bandwidth and 3 V/µs slew rate, the circuit can process moderate-bandwidth current transients. Input filtering, shunt impedance, and common-mode limits should be evaluated before operation.

📟

Differential Voltage Measurement

The INA105KUG4 is appropriate when an instrumentation system must compare two voltages rather than measure either one against ground. The differential architecture rejects common-mode disturbance, while unity gain keeps the measured difference at its original scale for downstream conversion. Its 1 MHz -3 dB bandwidth supports signal frequencies below that level, and the 3 V/µs slew rate limits large-signal distortion for faster transitions. System designers should verify source impedances, input bias-current effects, and output headroom.

🏭

Industrial Sensor Interface

The INA105KUG4 can serve as the analog interface between a pair of industrial sensor outputs and a downstream acquisition system. Its fixed unity gain reduces calibration complexity, while the monolithic resistor network avoids the component-count and tolerance burden of a discrete difference amplifier. The 1 MHz bandwidth gives adequate speed for many process-control sensors, and common-mode rejection helps suppress shared industrial interference. Protection, isolation, and surge requirements should be handled separately from the amplifier itself.

🎧

Audio and Analog Difference Sensing

The INA105KUG4 can compare two low-level analog voltages when a balanced source requires differential extraction. The unity-gain network avoids additional gain coloration in the signal path, and the integrated trimming supports repeatable channel matching. Its 1 MHz bandwidth covers much of the audible range and extends into low-frequency measurement instrumentation, while the 3 V/µs slew rate supports normal audio-rate transients. Common-mode headroom, output swing, and noise performance should be confirmed for the specific source impedance.

🖥️

Portable Instrument Signal Conditioning

The INA105KUG4 is suitable for portable instrumentation that compares two sensor channels within a compact 8-pin SOIC footprint. Its monolithic unity-gain network reduces external component count, which assists board-space and assembly goals. A 1 MHz -3 dB bandwidth is sufficient for many portable biomedical, test, and measurement signals, and the 3 V/µs slew rate provides adequate response for moderate waveform edges. Battery rails and sensor outputs must remain within the amplifier's supported common-mode and supply ranges.

What is the INA105KUG4?
The INA105KUG4 is a precision unity-gain differential amplifier in an 8-pin SOIC package. According to the Texas Instruments INA105 datasheet, the monolithic circuit combines a precision operational amplifier with an on-chip metal-film resistor network. Its 1 MHz -3 dB bandwidth and 3 V/µs slew rate make it suitable for differential measurement and signal-conditioning circuits that need accurate gain and common-mode rejection.
What is the gain of the INA105KUG4?
The INA105KUG4 has a fixed nominal gain of 1 V/V. The Texas Instruments INA105 datasheet identifies it as a Gain = 1 differential amplifier and explains that its on-chip metal-film resistors are laser trimmed for accurate gain. The integrated network therefore provides unity-gain differential-to-single-ended conversion without requiring a discrete precision resistor pair.
What is the bandwidth and slew rate of INA105KUG4?
The INA105KUG4 has a 1 MHz -3 dB bandwidth and a 3 V/µs slew rate. These figures appear in the Texas Instruments product information for the INA105 family. The bandwidth defines its useful small-signal frequency range, while the slew rate characterizes how rapidly the output can move under larger-signal conditions. Both parameters should be checked against the source impedance and required differential signal bandwidth.
Where can I download the INA105KUG4 datasheet PDF?
The official INA105KUG4 datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/ina105.pdf. The document contains the device description, precision gain network explanation, ordering information, electrical characteristics, and application guidance. Use the manufacturer document for final pin assignments, supply limits, common-mode range, and PCB implementation details.
Where can I find the INA105KUG4 pinout?
The INA105KUG4 pinout is defined in the pin-configuration section of the Texas Instruments INA105 datasheet. The component is ordered in an 8-pin SOIC package, so its diagram includes eight numbered terminals. Consult the manufacturer pin-description table before routing the differential inputs, reference, supply, and output nets because the SOIC footprint alone does not identify each terminal's function.
What is the difference between the INA105 and a discrete unity-gain differential amplifier?
The INA105 integrates a precision operational amplifier and a laser-trimmed metal-film resistor network on one monolithic die. The Texas Instruments datasheet states that resistor trimming supports accurate gain and high common-mode rejection, while matched temperature-coefficient behavior maintains performance over temperature. A discrete differential stage can offer flexibility, but it requires matched external resistors and additional layout and tolerance analysis.
Is the INA105KUG4 suitable for bridge-sensor signal conditioning?
Yes, the INA105KUG4 is suitable for many bridge-sensor signal-conditioning stages because it provides unity-gain differential measurement and high common-mode rejection. The 1 MHz bandwidth accommodates sensors whose signals vary within that range, and the 3 V/µs slew rate supports moderate-frequency waveforms. The input common-mode and output-swing limits must still be checked against the bridge excitation and sensor output.
Where to buy INA105KUG4 online?
Use the Request a Quote form on this page to request INA105KUG4 availability, current lead time, and an order quotation from XAIPART. The manufacturer offers INA105 in multiple package configurations, while the KUG4 ordering code identifies the 8-pin SOIC variant used in this listing. Confirm the exact suffix, reel quantity, and delivery requirements when placing the order.
What is the price of INA105KUG4?
Submit the INA105KUG4 part number through the Request a Quote form on this page for the current price and quantity schedule. Pricing depends on order quantity, delivery conditions, and current component availability. The product is identified as Texas Instruments INA105KUG4 in an 8-pin SOIC package, so quotations should use that complete suffix to avoid substitution with another INA105 package option.
What is the lead time for INA105KUG4?
Request the current INA105KUG4 lead time through the Request a Quote form on this page. The component is listed by Texas Instruments in an 8-pin SOIC configuration, but production timing can change with inventory and order volume. Include the required quantity, date code preference, and packaging format in the request so the commercial response reflects the intended build.
Is INA105KUG4 in stock?
Current INA105KUG4 stock should be confirmed through the Request a Quote form on this page. The exact ordering code identifies a Texas Instruments differential amplifier in an 8-pin SOIC package. Because stock levels can change quickly, request quantity-specific availability rather than relying on a generic active-device designation or a historical inventory figure.
INA105KUG4 vs INA105KUG4 alternatives: which is better for instrumentation?
The INA105KUG4 is preferable when a design specifically needs Texas Instruments' fixed unity-gain differential stage with a 1 MHz bandwidth and integrated precision network. A same-footprint alternative should be selected only after confirming its pin function, gain error, common-mode range, supply range, and bandwidth against the original design. The INA105 family member remains the direct choice when manufacturer continuity and exact ordering-code compatibility are priorities.
When should I choose INA105KUG4 over another unity-gain differential amplifier?
Choose the INA105KUG4 when the design requires an 8-pin SOIC unity-gain differential amplifier with a 1 MHz -3 dB bandwidth, a 3 V/µs slew rate, and an integrated laser-trimmed metal-film network. Select an alternative only when its input topology, reference behavior, supply limits, and common-mode range are demonstrably compatible. This minimizes the risk of an apparently similar part introducing an unexpected signal-path or layout difference.
What is the best drop-in replacement for INA105KUG4?
The best drop-in replacement is the candidate that preserves the 8-pin SOIC footprint, pin functions, unity-gain behavior, input common-mode range, supply limits, and output-signal compatibility. The available cross-reference information identifies an Analog Devices replacement, but a complete orderable MPN is not established on the cited listing. Therefore, treat the INA105KUG4 alternatives on this page as engineering candidates and verify every electrical limit against the manufacturer datasheet before substitution.
Can an Analog Devices part replace INA105KUG4?
An Analog Devices part can replace INA105KUG4 only if it is pin-to-pin compatible with the 8-pin SOIC topology and preserves the required unity-gain performance. The cross-reference listing identifies Analog Devices as a replacement manufacturer for the INA105, but it does not establish a verified orderable MPN in the cited result. Confirm the exact candidate's differential pin arrangement, reference pin, supply range, common-mode range, bandwidth, and slew rate before approving it.
What are the key specifications of INA105KUG4 that engineers should know?
The INA105KUG4 is a single-circuit, fixed unity-gain differential amplifier in an 8-pin SOIC package. Its confirmed headline characteristics are a 1 MHz -3 dB bandwidth, a 3 V/µs slew rate, a precision operational-amplifier core, and an on-chip laser-trimmed metal-film resistor network. Texas Instruments specifically highlights accurate gain, high common-mode rejection, resistor tracking, and temperature-stable performance as the principal design features.

Données de référence d'ingénierie pour INA105KUG4 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the INA105KUG4 when the design requires a fixed unity-gain differential amplifier with an integrated precision network, 1 MHz -3 dB bandwidth, and 3 V/µs slew rate in an 8-pin SOIC package. The INA105U, INA105K, and INA105UA are same-family choices for designs that can use their respective ordering and temperature configurations, but the original suffix should be retained when manufacturer continuity is critical. Consider the AD8271BRZ only after confirming its gain tolerance, common-mode range, supply limits, reference behavior, and noise against the INA105 design. Consider the AD8210JRZ when its signal bandwidth, output capability, and gain-setting architecture satisfy the application. Because the differences between precision differential amplifiers may appear in common-mode range and gain error rather than headline bandwidth, validate the complete electrical specification before approving any substitution.

Comparaison avec les alternatives

Paramètre Ce produit INA105U INA105K INA105UA AD8271BRZ AD8210JRZ
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Analog Devices Analog Devices
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Amplifier Function Unity-gain differential amplifier Unity-gain differential amplifier Unity-gain differential amplifier Unity-gain differential amplifier Differential amplifier Differential amplifier
Circuit Count 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit

Principaux différenciateurs

  • Integrated fixed-gain precision network (vs AD8210JRZ)
  • Confirmed 1 MHz signal bandwidth (vs AD8210JRZ)
  • Monolithic resistor tracking (vs AD8271BRZ)

Notes de conception

Route the two differential inputs as a closely matched pair and minimize asymmetry in trace length, connector geometry, and input filtering. Any difference between the two paths can create differential-input impedance mismatch that reduces common-mode rejection. Place input and bypass capacitors near their associated pins, and use a low-impedance ground plane to prevent supply return currents from sharing the input-signal return path.

Check source impedance before relying on the specified 1 MHz -3 dB bandwidth. The manufacturer headline bandwidth applies under specified test conditions, including source and load conditions that must be read in the datasheet. If either sensor has substantial output impedance, include its attenuation and phase contribution in the complete signal-path response. Differential filtering should use matched components to avoid converting common-mode noise into differential error.

Do not treat unity gain as immunity to input common-mode limits. The input common-mode voltage must remain within the operating region established in the Texas Instruments INA105 datasheet, including limits that can vary with supply voltage. Likewise, verify output swing at the required load before using the 3 V/µs slew-rate specification for a large-amplitude signal. A numerically fast amplifier can still clip if its output range is insufficient.

Place the INA105KUG4 close to the source or bridge to minimize exposed sensitive traces and susceptibility to coupled noise. Decouple each supply connection locally and provide an adequate ground return without introducing long current loops through the analog section. Because the device uses a precision integrated resistor network, mechanical stress and board contamination are generally more important to long-term accuracy than adding additional discrete gain-setting resistors.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The INA105 is a precision analog amplifier rather than an automotive-qualified device, so AEC-Q100 is not applicable. No explicit compliance declarations were identified in the cited manufacturer or distributor results.

Recherches associées

INA105KUG4 datasheet INA105KUG4 pinout INA105KUG4 datasheet pdf INA105KUG4 equivalent INA105KUG4 replacement INA105KUG4 cross reference INA105KUG4 footprint INA105KUG4 application circuit Texas Instruments INA105KUG4 INA105KUG4 price INA105KUG4 stock INA105 unity gain 1MHz amplifier INA105KUG4 vs AD8271BRZ INA105KUG4 vs AD8210JRZ 8-SOIC precision differential amplifier

Composants & termes associés

Texas Instruments INA105KUG4 INA105U INA105K INA105UA AD8271BRZ AD8210JRZ differential amplifier instrumentation amplifier precision operational amplifier signal-conditioning IC unity gain common-mode rejection 1 MHz bandwidth 3 V/µs slew rate metal-film resistor network laser trimming 8-SOIC SOIC family surface-mount package bridge sensor current measurement Texas Instruments INA105 datasheet RoHS REACH
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ