LM258AMX - Dual 3-32V Op Amp | onsemi | 8-SOIC
Référence : LM258AMX ✓ ActifLM258AMX Présentation
An operational amplifier is an active analog signal-processing component that uses differential input voltage to control an output voltage. A dual operational amplifier combines two amplifiers in one package, reducing board area and simplifying power-supply routing. The LM258AMX combines this general-purpose amplifier function with internal frequency compensation, allowing stable operation at unity gain without an external compensation capacitor. This makes it useful in designs where the signal source does not require a specialized low-noise or high-speed amplifier.
The main electrical features of the LM258A family include internal frequency compensation for unity gain, 100 dB large DC voltage gain, and a wide power-supply range. The input common-mode voltage range includes ground, which permits the amplifier to process signals close to the lower supply rail. The output swing is characterized as extending to VCC minus 1.5 V, a relevant consideration when the amplifier must drive an ADC, a relay driver, or another circuit with limited headroom. The 8-SOIC package is a standard surface-mount format suitable for conventional PCB assembly.
Typical uses include current sensing in industrial control equipment, signal conditioning in sensor interfaces, audio preamplifier stages, feedback networks in power converters, and general instrumentation. In a current-sense amplifier, the two independent channels can monitor different loads or provide differential amplification stages. In a sensor interface, the input common-mode range can simplify conditioning of signals referenced to ground. Designers should still account for the output-voltage headroom, supply decoupling, input bias currents, and the frequency-response limits of the selected amplifier configuration.
The LM258AMX is appropriate when a design needs two amplifiers, a broad single-supply operating range, and a familiar 8-pin SOIC footprint. It is less suitable for applications requiring very low noise, rail-to-rail input or output operation, high slew rate, or precision offset and drift performance. This page combines the manufacturer-family electrical characteristics with package information, application guidance, and practical design considerations for evaluating the part in new analog circuits.
Alternatives de remplacement direct pour LM258AMX — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec LM258AMX (même facteur de forme et même empreinte) — différant par Amplifier Type, Package, Gain-Bandwidth Product, Number of Amplifiers, Maximum Supply Voltage.
LM258ADR
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →LM258AMX
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →LM358AMX/NOPB
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →LM358ADR2G
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →LM358DR
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →LM258AMX Valeurs maximales et caractéristiques électriques
| Number of Amplifiers | 2 amplifiers |
| Amplifier Type | Dual operational amplifier |
| Architecture | Independent amplifiers |
| Supply Voltage Range | 3 V to 32 V |
| Large DC Voltage Gain | 100 dB |
| Frequency Compensation | Internally frequency compensated for unity gain |
| Input Common-Mode Voltage Range | Includes ground |
| Output Voltage Swing | DC to VCC - 1.5 V |
| Boîtier | 8-pin SOIC |
| Type de montage | Surface mount |
| Lead-Free Status | Lead free |
| Statut RoHS | RoHS compliant |
Guide de configuration des broches du LM258AMX 8-pin soic
Configuration des broches du LM258AMX (boîtier 8-pin soic). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour LM258AMX.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
LM258AMX convient pour 6 applications: Industrial Current-Sense Interface, Sensor Signal Conditioning, Audio Preamplifier, Power-Supply Feedback Network, Data-Acquisition Analog Front End, General Instrumentation Buffer.
Industrial Current-Sense Interface
The LM258AMX suits industrial current-sense signal conditioning because the LM258A family provides two independent amplifiers with 100 dB large DC voltage gain and internal frequency compensation for unity gain. Place one channel in a differential amplifier around a low-value shunt and use the other channel for an offset or reference buffer. The 3 V to 32 V supply range supports control equipment operating from low-voltage logic rails through higher industrial supplies, while the input common-mode range that includes ground helps process measurements referenced to the lower rail. Check the shunt, input protection, output swing, and amplifier stability at the selected gain before production release.
Recommandé
Sensor Signal Conditioning
The LM258AMX can condition low-frequency sensor signals in instrumentation and factory-control systems. Its two independent channels can amplify a sensor output and buffer a reference or feedback node, reducing the number of separate amplifier packages. Internal frequency compensation supports unity-gain operation, and the 100 dB large DC voltage gain is useful for common-mode rejection in a differential input stage. Because the amplifier is not described as rail-to-rail, verify that the sensor signal and resulting output remain inside the input common-mode and approximately VCC minus 1.5 V output limits.
Recommandé
Audio Preamplifier
The LM258AMX is suitable for general-purpose audio preamplifier stages that do not require ultra-low-noise performance. Two independent channels can support left and right signal paths in a small audio system, while internal frequency compensation simplifies unity-gain voltage-follower or moderate-gain designs. The 3 V to 32 V supply range permits operation from a single low-voltage rail, and the common-mode range that includes ground supports signals centered near the lower supply rail. The output must remain below approximately VCC minus 1.5 V, so headroom should be evaluated for headphone, line-level, or mixer interfaces.
Recommandé
Power-Supply Feedback Network
The two amplifiers in the LM258AMX can be used in feedback and error-amplifier positions for a simple power-control design. One channel may compare a feedback voltage with a reference, while the other channel can buffer the error or drive a monitoring node. The internal unity-gain compensation and 100 dB large DC voltage gain are useful for closed-loop voltage-control applications, and the 3 V to 32 V supply range supports a broad range of control rails. The design must account for the output swing limit, load capability, loop compensation, and the risk of saturation during startup or transient conditions.
Recommandé
Data-Acquisition Analog Front End
The LM258AMX can form part of an analog front end ahead of an ADC or data-conversion system. Its differential-input capability supports amplification of small signals referenced to ground, while the second channel can provide gain or buffering for a second analog channel. Internal frequency compensation makes the device straightforward to use at unity gain, and the broad supply range allows the analog section to share a supply with many control systems. Validate input bias-current error, input offset, output-swing margin, and bandwidth against the acquisition system before using the device with high-impedance sources.
Recommandé
General Instrumentation Buffer
The LM258AMX fits instrumentation buffers where two independent voltage followers or fixed-gain stages are useful in a limited board area. The internal frequency compensation for unity gain reduces the need for external compensation components, and the high DC gain supports accurate closed-loop operation when feedback resistors are used. The input common-mode range includes ground, which is advantageous for low-level signals referenced to the lower supply rail. For instrumentation applications, verify offset voltage, drift, input bias current, noise, and input/output impedance from the complete manufacturer specifications because those values are not present in the visible source excerpts.
Recommandé
Données de référence d'ingénierie pour LM258AMX — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | LM258ADR | LM258AMX | LM358AMX | LM358ADR | LM358DR |
|---|---|---|---|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Brand | onsemi | onsemi | onsemi | onsemi | onsemi | onsemi |
| Number of Amplifiers | 2 independent amplifiers | 2 independent amplifiers | 2 independent amplifiers | 2 independent amplifiers | 2 independent amplifiers | 2 independent amplifiers |
| Supply Voltage Range | 3 V to 32 V | 3 V to 32 V | 3 V to 32 V | 3 V to 32 V | 3 V to 32 V | 3 V to 32 V |
| Large DC Voltage Gain | 100 dB | 100 dB | 100 dB | 100 dB | 100 dB | 100 dB |
| Frequency Compensation | Internal, unity gain | Internal, unity gain | Internal, unity gain | Internal, unity gain | Internal, unity gain | Internal, unity gain |
| Input Common-Mode Range | Includes ground | Includes ground | Includes ground | Includes ground | Includes ground | Includes ground |
| Output Voltage Swing | DC to VCC - 1.5 V | DC to VCC - 1.5 V | DC to VCC - 1.5 V | DC to VCC - 1.5 V | DC to VCC - 1.5 V | DC to VCC - 1.5 V |
Principaux différenciateurs
- Two independent amplifiers in one 8-pin SOIC (vs LM258ADR)
- Internal unity-gain frequency compensation (vs LM358AMX)
- Single-supply input operation includes ground (vs LM358DR)
Notes de conception
Decouple each LM258AMX supply connection close to the device with the manufacturer-recommended ceramic capacitance and maintain a short ground return. Because the LM258AMX supports a 3 V to 32 V supply range, the selected bypass network must remain suitable for the actual rail voltage and expected transient bandwidth. Check the output swing against the load requirement: the documented limit is DC to VCC - 1.5 V, so a downstream stage requiring a near-rail input needs additional headroom.
Use the 8-pin SOIC land pattern and follow the manufacturer pin-description table when assigning the two amplifier channels. Route each input and output directly to its intended circuit, keep the feedback loop compact, and avoid sharing long analog paths with switching or high-current return paths. A common ground reference is essential for both channels; poor ground-current routing can inject noise that appears as common-mode or output disturbance.
Do not treat the LM258AMX as a rail-to-rail amplifier. The documented output swing reaches only to approximately VCC - 1.5 V, while the input common-mode range includes ground but does not imply operation at the positive supply rail. Confirm the required input range, output range, load, gain, and frequency response in the complete manufacturer datasheet before substituting an LM258A, LM358A, or LM2904-family device.
Informations de conformité
The visible LM258AMX specifications identify lead-free construction and RoHS compliance. Other compliance and qualification attributes require confirmation from the manufacturer.