onsemi

LM258AMX - Dual 3-32V Op Amp | onsemi | 8-SOIC

MPN: LM258AMX ✓ Aktif
3 V to 32 V Vdss 8-pin SOIC Package Internally frequency compensated for unity gain Speed
MOQ: 1 |

LM258AMX Ringkasan

The onsemi LM258AMX is a dual, internally frequency-compensated operational amplifier designed for single-supply operation over a wide voltage range. The device contains two independent high-gain amplifiers in an 8-pin SOIC package. According to the Fairchild Semiconductor LM258A family documentation, the LM258A series supports a 3 V to 32 V power supply range, provides large DC voltage gain of 100 dB, and includes an input common-mode voltage range that reaches ground. The amplifiers are optimized for general-purpose signal conditioning, instrumentation, buffering, and feedback control.

An operational amplifier is an active analog signal-processing component that uses differential input voltage to control an output voltage. A dual operational amplifier combines two amplifiers in one package, reducing board area and simplifying power-supply routing. The LM258AMX combines this general-purpose amplifier function with internal frequency compensation, allowing stable operation at unity gain without an external compensation capacitor. This makes it useful in designs where the signal source does not require a specialized low-noise or high-speed amplifier.

The main electrical features of the LM258A family include internal frequency compensation for unity gain, 100 dB large DC voltage gain, and a wide power-supply range. The input common-mode voltage range includes ground, which permits the amplifier to process signals close to the lower supply rail. The output swing is characterized as extending to VCC minus 1.5 V, a relevant consideration when the amplifier must drive an ADC, a relay driver, or another circuit with limited headroom. The 8-SOIC package is a standard surface-mount format suitable for conventional PCB assembly.

Typical uses include current sensing in industrial control equipment, signal conditioning in sensor interfaces, audio preamplifier stages, feedback networks in power converters, and general instrumentation. In a current-sense amplifier, the two independent channels can monitor different loads or provide differential amplification stages. In a sensor interface, the input common-mode range can simplify conditioning of signals referenced to ground. Designers should still account for the output-voltage headroom, supply decoupling, input bias currents, and the frequency-response limits of the selected amplifier configuration.

The LM258AMX is appropriate when a design needs two amplifiers, a broad single-supply operating range, and a familiar 8-pin SOIC footprint. It is less suitable for applications requiring very low noise, rail-to-rail input or output operation, high slew rate, or precision offset and drift performance. This page combines the manufacturer-family electrical characteristics with package information, application guidance, and practical design considerations for evaluating the part in new analog circuits.

Pilihan pengganti yang segera untuk LM258AMX — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera LM258AMX (sama faktor bentuk dan kaki) — berbeza dalam Amplifier Type, Package, Gain-Bandwidth Product, Number of Amplifiers, Maximum Supply Voltage.

Texas Instruments
Gain-Bandwidth Product: 700 kHz
Number of Amplifiers: 2 circuits
Maximum Supply Voltage: 30 V
Bandingkan Dengan LM258AMX →
onsemi
Amplifier Type: General Purpose
Package: 8-SOIC, 3.90 mm width
Gain-Bandwidth Product: 1 MHz
Bandingkan Dengan LM258AMX →
Texas Instruments
Amplifier Type: Dual general-purpose operational amplifier
Gain-Bandwidth Product: 1 MHz
Maximum Supply Voltage: 32 V
Texas Instruments
Amplifier Type: General Purpose Operational Amplifier
Package: SOIC-8 (D)
Bandingkan Dengan LM258AMX →

LM258ADR

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
Texas Instruments
📦 8-pin SOIC
Dual operational amplifier · 2 circuits · 30 V · 700 kHz · 1.1 MHz · 100 dB · 500 uA · 20 nA

Hubungi untuk harga

Lihat Datasheet →

LM258AMX

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
onsemi
📦 8-pin SOIC
2 amplifiers · Dual operational amplifier · Independent amplifiers · 3 V to 32 V · 100 dB · Internally frequency compensated for unity gain · Includes ground · DC to VCC - 1.5 V

Hubungi untuk harga

Lihat Datasheet →

LM358AMX/NOPB

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
Texas Instruments
📦 8-pin SOIC
Dual general-purpose operational amplifier · 2 circuits · 2 amplifiers · 32 V · 1 MHz · 0°C to 70°C · SOIC (D) · 8 pins

Hubungi untuk harga

Lihat Datasheet →

LM358ADR2G

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
onsemi
📦 8-pin SOIC
General Purpose · 2 channels · 3 V to 32 V · 1 MHz · 0.6 V/µs · Extends to ground or VEE · Single supply or split supply · 8-SOIC, 3.90 mm width

Hubungi untuk harga

Lihat Datasheet →

LM358DR

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
Texas Instruments
📦 8-pin SOIC
General Purpose Operational Amplifier · 2 · 700 kHz · 0.3 V/µs · 3 V to 32 V · ±1.5 V to ±16 V · 0.7 mA (typ) · 2 mV (typ), 7 mV (max)

Hubungi untuk harga

Lihat Datasheet →

LM258AMX Penilaian maksimum & Ciri-ciri Elektrik

Number of Amplifiers 2 amplifiers
Amplifier Type Dual operational amplifier
Architecture Independent amplifiers
Supply Voltage Range 3 V to 32 V
Large DC Voltage Gain 100 dB
Frequency Compensation Internally frequency compensated for unity gain
Input Common-Mode Voltage Range Includes ground
Output Voltage Swing DC to VCC - 1.5 V
Kemasan 8-pin SOIC
Jenis Pemasangan Surface mount
Lead-Free Status Lead free
Status RoHS RoHS compliant

Panduan Konfigurasi Pin LM258AMX 8-pin soic

Konfigurasi pin untuk LM258AMX (8-pin soic pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai 8-pin soic untuk LM258AMX

Tiada data garisan pin yang diperoleh untuk LM258AMX.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

LM258AMX patut untuk 6 aplikasis: Industrial Current-Sense Interface, Sensor Signal Conditioning, Audio Preamplifier, Power-Supply Feedback Network, Data-Acquisition Analog Front End, General Instrumentation Buffer.

🏭

Industrial Current-Sense Interface

The LM258AMX suits industrial current-sense signal conditioning because the LM258A family provides two independent amplifiers with 100 dB large DC voltage gain and internal frequency compensation for unity gain. Place one channel in a differential amplifier around a low-value shunt and use the other channel for an offset or reference buffer. The 3 V to 32 V supply range supports control equipment operating from low-voltage logic rails through higher industrial supplies, while the input common-mode range that includes ground helps process measurements referenced to the lower rail. Check the shunt, input protection, output swing, and amplifier stability at the selected gain before production release.

🧩

Sensor Signal Conditioning

The LM258AMX can condition low-frequency sensor signals in instrumentation and factory-control systems. Its two independent channels can amplify a sensor output and buffer a reference or feedback node, reducing the number of separate amplifier packages. Internal frequency compensation supports unity-gain operation, and the 100 dB large DC voltage gain is useful for common-mode rejection in a differential input stage. Because the amplifier is not described as rail-to-rail, verify that the sensor signal and resulting output remain inside the input common-mode and approximately VCC minus 1.5 V output limits.

🎧

Audio Preamplifier

The LM258AMX is suitable for general-purpose audio preamplifier stages that do not require ultra-low-noise performance. Two independent channels can support left and right signal paths in a small audio system, while internal frequency compensation simplifies unity-gain voltage-follower or moderate-gain designs. The 3 V to 32 V supply range permits operation from a single low-voltage rail, and the common-mode range that includes ground supports signals centered near the lower supply rail. The output must remain below approximately VCC minus 1.5 V, so headroom should be evaluated for headphone, line-level, or mixer interfaces.

⚡

Power-Supply Feedback Network

The two amplifiers in the LM258AMX can be used in feedback and error-amplifier positions for a simple power-control design. One channel may compare a feedback voltage with a reference, while the other channel can buffer the error or drive a monitoring node. The internal unity-gain compensation and 100 dB large DC voltage gain are useful for closed-loop voltage-control applications, and the 3 V to 32 V supply range supports a broad range of control rails. The design must account for the output swing limit, load capability, loop compensation, and the risk of saturation during startup or transient conditions.

📺

Data-Acquisition Analog Front End

The LM258AMX can form part of an analog front end ahead of an ADC or data-conversion system. Its differential-input capability supports amplification of small signals referenced to ground, while the second channel can provide gain or buffering for a second analog channel. Internal frequency compensation makes the device straightforward to use at unity gain, and the broad supply range allows the analog section to share a supply with many control systems. Validate input bias-current error, input offset, output-swing margin, and bandwidth against the acquisition system before using the device with high-impedance sources.

🔧

General Instrumentation Buffer

The LM258AMX fits instrumentation buffers where two independent voltage followers or fixed-gain stages are useful in a limited board area. The internal frequency compensation for unity gain reduces the need for external compensation components, and the high DC gain supports accurate closed-loop operation when feedback resistors are used. The input common-mode range includes ground, which is advantageous for low-level signals referenced to the lower supply rail. For instrumentation applications, verify offset voltage, drift, input bias current, noise, and input/output impedance from the complete manufacturer specifications because those values are not present in the visible source excerpts.

What is the onsemi LM258AMX?
The onsemi LM258AMX is a dual, general-purpose operational amplifier with two independent, high-gain amplifiers in an 8-pin SOIC package. The Fairchild LM258A family documentation identifies the device as internally frequency compensated for unity gain, with 100 dB large DC voltage gain and operation from a 3 V to 32 V single supply. It is suited to instrumentation, buffering, sensor signal conditioning, and feedback applications that do not require rail-to-rail operation or ultra-low noise.
What is the operating voltage range of LM258AMX?
The LM258AMX operates from a 3 V to 32 V single power supply according to the Fairchild LM258A family documentation. The broad range allows the same amplifier family to be used in low-voltage control circuits and higher-voltage industrial interfaces. The exact operating temperature range is not stated on the source page, so use the manufacturer datasheet and the complete ordering information for temperature-grade and qualification requirements.
Where can I download the LM258AMX datasheet PDF?
The LM258AMX datasheet is available through the Fairchild Semiconductor datasheet link listed on this page. It documents the LM2904, LM358/LM358A, and LM258/LM258A dual-amplifier family, including internal frequency compensation, 100 dB large DC voltage gain, the 3 V to 32 V supply range, and the input common-mode range that includes ground. Use the LM258AMX ordering details to confirm package, temperature, and compliance requirements before releasing a production design.
What is the pinout of LM258AMX?
The LM258AMX uses an 8-pin SOIC pinout with two independent operational amplifiers. In the standard dual-op-amp arrangement, each amplifier has an input, an inverting input, an output, and the device supply pins shared by both channels. The exact numbered pin assignments should be taken from the manufacturer pin-description table because package drawings can vary in orientation across documentation formats. The pinout is not reproduced here to avoid assigning a pin number without the corresponding manufacturer table.
Is LM258AMX suitable for single-supply applications?
Yes, the LM258AMX is specifically designed for single-supply operation, with a 3 V to 32 V power-supply range documented for the LM258A family. Its input common-mode voltage range includes ground, which is useful for signals referenced to the lower rail. It is a strong fit for sensor interfaces, current-sense amplifiers, and feedback loops that operate from a single positive supply, provided the output does not need to swing closer than approximately 1.5 V below VCC.
What are the key specifications of LM258AMX that engineers should know?
The principal LM258AMX specifications are two independent amplifiers, internal frequency compensation for unity gain, 100 dB large DC voltage gain, a 3 V to 32 V supply range, an input common-mode range that includes ground, and an output swing to approximately VCC minus 1.5 V. These characteristics place the part in the general-purpose, dual operational-amplifier class. Exact bandwidth, slew rate, offset, bias current, and temperature limits should be taken from the complete manufacturer datasheet before final circuit sign-off.
Can LM258AMX be used as a buffer?
Yes, LM258AMX can be used as a voltage follower or unity-gain buffer because the LM258A family is internally frequency compensated for unity gain. The buffer configuration provides high input impedance and low output impedance while preserving the signal level. Check the loaded output range against the 3 V to 32 V supply limits and the VCC minus 1.5 V output-swing characteristic, especially when driving a downstream ADC, relay, or digital logic input.
LM258AMX versus LM358AMX: which should I choose?
LM258AMX and LM358AMX belong to the same general dual-operational-amplifier family and use the same 8-pin SOIC-style package family, but the A suffix indicates different device specifications and possibly different temperature or qualification positioning. The visible source identifies LM258/LM258A and LM358/LM358A as related variants, while it does not provide a complete comparison table. Select the exact orderable part by reviewing its electrical limits, temperature grade, lifecycle status, and qualification requirements in the manufacturer documentation.
What is the best drop-in replacement for LM258AMX?
The closest drop-in candidates are the related LM258A dual operational amplifiers in the same 8-pin SOIC footprint, including LM258AMX family variants and the similarly packaged LM258ADR. A replacement should be selected only after checking pin assignment, supply range, gain, common-mode range, output swing, temperature grade, and package dimensions. The listed alternatives are same-family candidates for engineering evaluation; they are not automatically approved substitutions for every production application.
What can replace LM258AMX?
A practical replacement for LM258AMX should be a dual, internally compensated operational amplifier in the same 8-pin SOIC footprint with comparable 3 V to 32 V single-supply capability and approximately 100 dB large DC voltage gain. LM258ADR, LM358AMX, LM358ADR, LM358DR, and LM2904DR are same-family options to evaluate, but the manufacturer datasheet should confirm electrical equivalence, pinout, temperature grade, and qualification. Confirm the final choice against the original circuit's gain, bandwidth, output-load, and common-mode requirements.
Is LM258AMX the same as LM258AMX?
LM258AMX and LM258AMX are the same manufacturer part designation when both listings refer to the onsemi 8-SOIC version of the LM258A dual operational amplifier. The MPN suffix identifies the package and ordering configuration, so engineers should still compare the full manufacturer ordering code and datasheet revision before substitution. The source listing identifies LM258AMX as an onsemi dual amplifier in an 8-SOIC package.
When should I choose LM258AMX over a precision op amp?
Choose LM258AMX when the design needs two general-purpose amplifiers, single-supply operation, internal unity-gain compensation, and a broad 3 V to 32 V supply range. Choose a precision op amp instead when input offset, drift, bias current, noise, or rail-to-rail performance is the dominant system requirement. LM258AMX is particularly useful for industrial signal conditioning and feedback circuits where the larger output headroom of a non-rail-to-rail amplifier is acceptable.
Is LM258AMX in stock and how do I check availability?
The current stock position for LM258AMX is not established by the visible manufacturer-family page. Use the Request a Quote form on this page to request the current lead time, minimum order quantity, and available quantity for the exact LM258AMX ordering code. Because availability can change, confirm the package suffix and production requirements with the supplier before committing the component to a build schedule.
What is the price of LM258AMX?
The current LM258AMX unit price and quantity-break schedule should be requested through the Request a Quote form on this page. The visible product results identify LM258AMX as an onsemi 8-SOIC dual operational amplifier but do not provide a complete price table with explicit quantities for this exact MPN. A quotation should include the exact suffix, order quantity, delivery location, and required compliance documentation.
What is the lead time for LM258AMX?
The current lead time for LM258AMX is not stated on the visible family documentation. Request a quotation through the Request a Quote form on this page and specify the required quantity, package configuration, and shipment destination. For new production programs, include the target build date so the supplier can confirm whether the part is stocked, allocated, or subject to manufacturer lead time.
How should LM258AMX be laid out on a PCB?
Place the LM258AMX close to the signal source and the circuitry it drives, and connect the supply pins to a low-impedance decoupling network with a short return path to ground. Keep analog input and output routing away from switching nodes and high-current return paths. The two channels are independent, but sharing supply pins means their ground and supply-return paths should be designed to prevent channel-to-channel coupling. Use the package land pattern and pin table from the manufacturer documentation.
What compliance information applies to LM258AMX?
LM258AMX is identified as lead free and RoHS compliant in the visible part documentation. The available information does not establish REACH status, AEC-Q100 qualification, halogen-free status, or conflict-minerals compliance, so those fields remain unknown. Industrial or automotive designs should request the manufacturer declaration and the exact orderable-part compliance documents rather than infer qualification from the family name.

Data referensi kejuruteraan untuk LM258AMX — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose LM258AMX when you need a dual, general-purpose operational amplifier for a single supply between 3 V and 32 V, particularly when the signal is ground-referenced and the output does not need to reach the positive rail. LM258ADR is a closely related LM258A alternative in the same 8-pin SOIC format and should be preferred when its specific qualification, temperature, or lifecycle terms better match the production program. LM358AMX, LM358ADR, and LM358DR are useful related-family candidates for evaluation, but the exact electrical and temperature requirements must be checked before substitution. Choose a precision or low-noise amplifier instead when offset, drift, noise, rail-to-rail input/output behavior, or high slew rate dominates the design.

Perbandingan dengan Gantian

Parametr Produk Ini LM258ADR LM258AMX LM358AMX LM358ADR LM358DR
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand onsemi onsemi onsemi onsemi onsemi onsemi
Number of Amplifiers 2 independent amplifiers 2 independent amplifiers 2 independent amplifiers 2 independent amplifiers 2 independent amplifiers 2 independent amplifiers
Supply Voltage Range 3 V to 32 V 3 V to 32 V 3 V to 32 V 3 V to 32 V 3 V to 32 V 3 V to 32 V
Large DC Voltage Gain 100 dB 100 dB 100 dB 100 dB 100 dB 100 dB
Frequency Compensation Internal, unity gain Internal, unity gain Internal, unity gain Internal, unity gain Internal, unity gain Internal, unity gain
Input Common-Mode Range Includes ground Includes ground Includes ground Includes ground Includes ground Includes ground
Output Voltage Swing DC to VCC - 1.5 V DC to VCC - 1.5 V DC to VCC - 1.5 V DC to VCC - 1.5 V DC to VCC - 1.5 V DC to VCC - 1.5 V

Penyeberangsung Jelas

  • Two independent amplifiers in one 8-pin SOIC (vsLM258ADR)
  • Internal unity-gain frequency compensation (vsLM358AMX)
  • Single-supply input operation includes ground (vsLM358DR)

Catatan Desain

Decouple each LM258AMX supply connection close to the device with the manufacturer-recommended ceramic capacitance and maintain a short ground return. Because the LM258AMX supports a 3 V to 32 V supply range, the selected bypass network must remain suitable for the actual rail voltage and expected transient bandwidth. Check the output swing against the load requirement: the documented limit is DC to VCC - 1.5 V, so a downstream stage requiring a near-rail input needs additional headroom.

Use the 8-pin SOIC land pattern and follow the manufacturer pin-description table when assigning the two amplifier channels. Route each input and output directly to its intended circuit, keep the feedback loop compact, and avoid sharing long analog paths with switching or high-current return paths. A common ground reference is essential for both channels; poor ground-current routing can inject noise that appears as common-mode or output disturbance.

Do not treat the LM258AMX as a rail-to-rail amplifier. The documented output swing reaches only to approximately VCC - 1.5 V, while the input common-mode range includes ground but does not imply operation at the positive supply rail. Confirm the required input range, output range, load, gain, and frequency response in the complete manufacturer datasheet before substituting an LM258A, LM358A, or LM2904-family device.

Maklumat Kesediaan

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Yes
Bosong halogen
Unknown
Mineral konflik
Unknown

The visible LM258AMX specifications identify lead-free construction and RoHS compliance. Other compliance and qualification attributes require confirmation from the manufacturer.

Data disahkan pada: 2026-11-10 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

LM258AMX datasheet LM258AMX pinout LM258AMX datasheet pdf LM258AMX equivalent LM258AMX replacement LM258AMX cross reference onsemi LM258AMX LM258AMX 8-SOIC LM258AMX dual op amp LM258AMX vs LM358AMX LM258AMX price LM258AMX stock LM258AMX application circuit LM258AMX 100 dB gain LM258AMX 3 V 32 V

Komponen dan Tanda berkaitan

onsemi Fairchild Semiconductor LM258AMX LM258A LM358A LM2904 dual operational amplifier operational amplifier analog signal conditioner voltage follower internally frequency compensated unity-gain bandwidth large DC voltage gain input common-mode voltage range output voltage swing 3 V to 32 V power supply 8-pin SOIC SOIC package family surface mount RoHS lead-free industrial instrumentation sensor interface current-sense amplifier
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ