LM2902QPWRG4Q1 - 26V Quad Automotive Op Amp | Texas Instruments
Référence : LM2902QPWRG4Q1 ✓ ActifLM2902QPWRG4Q1 Présentation
An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its two inputs. The quad LM2902 configuration places four high-gain, internally frequency-compensated operational amplifiers in one package. In the broader component hierarchy, this device belongs to the operational-amplifier family, analog amplifier ICs, and semiconductor-based signal-conditioning components. Each amplifier can operate independently when its supply and input common-mode requirements are met.
The principal features of the LM2902QPWRG4Q1 include four amplifier circuits, 0.5 V/µs slew rate, 80 dB common-mode rejection ratio, and a 1.2 MHz gain-bandwidth product. Its automotive-oriented temperature range of -40°C to 125°C supports operation across demanding vehicle and industrial environments. The 14-TSSOP package also provides a compact surface-mount footprint for four analog channels.
Internally, the LM2902-Q1 family uses four independent, high-gain, frequency-compensated operational amplifiers. This architecture allows one package to implement four analog functions without requiring separate amplifier packages. Its 0.5 V/µs slew rate determines how quickly an output can follow a changing input, while the 80 dB CMRR specification quantifies rejection of common-mode voltage applied to both inputs.
Typical uses include sensor signal conditioning, transducer amplification, analog summing, active filtering, low-level current-to-voltage conversion, and general instrumentation. Automotive applications can include conditioning signals from resistive sensors, bridge-based sensors, and interface electronics, provided the design observes the supply-voltage and input common-mode limits.
The primary design consideration is the relationship between supply voltage, output swing, input common-mode range, and the load connected to each amplifier. Because the LM2902 can operate from single or split supplies, output limits must be checked with the actual rail arrangement. Decoupling capacitors should be placed close to the supply pins, and unused amplifier inputs must be configured according to the manufacturer recommendations.
This page combines the exact LM2902QPWRG4Q1 specifications, source-linked documentation, package information, practical application guidance, and qualified drop-in alternatives. The comparison and design notes focus on engineering decisions that help shorten evaluation, footprint verification, and replacement planning for 14-pin TSSOP quad operational-amplifier designs.
Alternatives de remplacement direct pour LM2902QPWRG4Q1 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec LM2902QPWRG4Q1 (même facteur de forme et même empreinte) — différant par Automotive Qualification, Supply Voltage.
LM2902QPWRQ1
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →LM2902KVQPWRQ1
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →LM2902QPWRG4Q1 Valeurs maximales et caractéristiques électriques
| Amplifier Type | General-purpose operational amplifier |
| Number of Circuits | 4 circuits |
| Tension d'alimentation | ±13 V to ±26 V |
| Maximum Supply Voltage | 26 V |
| Gain-Bandwidth Product | 1.2 MHz |
| Offset Voltage | 2 mV |
| Slew Rate | 0.5 V/µs |
| Common-Mode Rejection Ratio | 80 dB |
| Input Bias Current | 0.5 µA |
| Température de fonctionnement | -40°C to 125°C |
| Package Type | 14-TSSOP |
| Package Width | 4.40 mm |
| Nombre de broches | 14 pins |
| Type de montage | Surface mount |
| Packaging | Tape and reel |
| Automotive Qualification | Automotive grade |
Guide de configuration des broches du LM2902QPWRG4Q1 4.40 mm
Configuration des broches du LM2902QPWRG4Q1 (boîtier 4.40 mm). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour LM2902QPWRG4Q1.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
LM2902QPWRG4Q1 convient pour 6 applications: Automotive Sensor Signal Conditioning, Industrial Transducer Amplification, Active Filtering and Control Loops, Current-to-Voltage Conversion, Audio and Communication Interfaces, Test and Measurement Front Ends.
Automotive Sensor Signal Conditioning
The LM2902QPWRG4Q1 fits automotive sensing interfaces that need several low-level amplification channels within one package. According to the Texas Instruments product page, the device provides four amplifiers, 80 dB CMRR, and operation from -40°C to 125°C, which helps reject common-mode noise while amplifying sensor-derived voltages. Use separate amplifier channels for signal conditioning, filtering, or thresholding, and verify the input common-mode range against the vehicle supply arrangement. The 26 V maximum supply rating supports higher-voltage industrial-style signal chains, but it does not remove the need to check output swing and load stability.
Recommandé
Industrial Transducer Amplification
The LM2902QPWRG4Q1 is appropriate for amplifying weak signals from resistive and bridge-based industrial transducers. According to the manufacturer datasheet, the amplifier offers 80 dB CMRR and a 0.5 µA input-bias-current specification, helping preserve small differential signals when common-mode voltage is also present. The four internal amplifiers can support instrumentation stages, gain blocks, and active filters within one 14-pin TSSOP package. The 1.2 MHz gain-bandwidth product is sufficient for many sensor and process-control bandwidths, although the final noise, accuracy, and settling requirements must be evaluated against the specific transducer.
Recommandé
Active Filtering and Control Loops
The LM2902QPWRG4Q1 can implement active low-pass, high-pass, and band-pass filters when four independent amplifier sections reduce board area. According to the Texas Instruments product page, the device has a 1.2 MHz gain-bandwidth product and 0.5 V/µs slew rate, providing useful bandwidth and dynamic-range capability for low-frequency control and measurement paths. Use resistor and capacitor values selected for the intended closed-loop response, then verify stability with the actual load and output capacitance. Its 26 V supply capability also allows the amplifier to operate in higher-voltage analog systems where a 5 V device would be unsuitable.
Recommandé
Current-to-Voltage Conversion
The LM2902QPWRG4Q1 is useful in current-to-voltage conversion circuits where a small sensor current must become a measurable voltage. According to the manufacturer datasheet, the four amplifiers are high-gain and internally frequency-compensated, enabling conventional transimpedance topologies with external feedback components. The 80 dB CMRR characteristic helps reject shared supply and ground disturbances, while the 1.2 MHz gain-bandwidth product permits a range of practical feedback networks. Designers should still calculate total input capacitance, feedback resistance, and output-swing limits, because those network details determine usable bandwidth more than the nominal amplifier bandwidth alone.
Recommandé
Audio and Communication Interfaces
The LM2902QPWRG4Q1 can serve as a general-purpose amplifier in low-frequency audio interface, buffer, and mixing circuits. According to the Texas Instruments datasheet, the 0.5 V/µs slew rate supports signal transitions required by many low-frequency audio paths, while the 26 V supply rating permits operation from higher-voltage rails. The internal frequency compensation simplifies basic closed-loop use and allows four amplifier functions to share one package. For high-fidelity audio, compare the device's noise and distortion against the system requirements, and include output filtering or gain-control circuitry where a fixed general-purpose amplifier is not sufficient.
Recommandé
Test and Measurement Front Ends
The LM2902QPWRG4Q1 fits measurement front ends requiring buffering, channel multiplexing support, differential-to-single-ended conversion, or programmable-gain stages. According to the manufacturer product page, its four amplifier circuits, 80 dB CMRR, and -40°C to 125°C temperature range support robust analog conditioning around sensors and low-level sources. The 14-TSSOP package simplifies dense instrument layouts while the 26 V rating supports higher-voltage front ends. Select external precision resistors and capacitors according to the required accuracy, and verify offset, bias-current, and temperature drift over the complete measurement range.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour LM2902QPWRG4Q1 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | LM2902QPWRQ1 | LM2902KVQPWRQ1 |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 14-TSSOP (PW) | 14-TSSOP (PW) | 14-TSSOP (PW) |
| Number of Circuits | 4 circuits | 4 circuits | 4 circuits |
| Amplifier Type | General-purpose operational amplifier | General-purpose operational amplifier | General-purpose operational amplifier |
Principaux différenciateurs
- Four independently usable amplifiers in one package (vs LM2902QPWRQ1)
- Automotive-grade ordering option (vs LM2902KVQPWRQ1)
- High-voltage general-purpose analog capability (vs LM2902QPWRQ1)
Notes de conception
Place the supply-decoupling capacitor as close as practical to the power and ground pins of the TSSOP package. Keep analog input and output routing away from high-current switching paths, and provide a quiet return path for sensitive channels. Because the device contains four amplifiers, evaluate each channel independently for routing direction, output loading, and possible crosstalk rather than assuming the four sections are electrically interchangeable in every board-level implementation.
Check input common-mode voltage and output swing against the actual supply rails before finalizing the schematic. The LM2902QPWRG4Q1 supports operation from single or split supplies, but nominal 26 V capability does not mean every input and output can reach the positive rail. Use the manufacturer limits and application guidance to establish safe operating regions, then add headroom for signal peaks, temperature effects, and load-current variation.
Do not treat all four amplifier channels as permanently interchangeable when unused. Follow the datasheet instructions for unused inputs, configure feedback paths so outputs remain in their valid range, and confirm the maximum capacitive load for the selected stability configuration. For replacement projects, compare the complete pin-description table and electrical limits for the original and proposed ordering code rather than relying only on the package drawing.
Estimated thermal analysis must use the highest expected supply voltage, lowest required output voltage, maximum channel load, and highest ambient temperature. Calculate total dissipation from all four channels rather than evaluating only one amplifier. The manufacturer package limits establish the safe operating boundary, while PCB copper area and airflow determine how much of the allowed package temperature rise can be realized in the finished assembly.
Informations de conformité
Texas Instruments identifies the device as automotive grade, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations appear in the cited source material.