LM2902QPWRG4Q1 - 26V Quad Automotive Op Amp | Texas Instruments
부품 번호: LM2902QPWRG4Q1 ✓ 활성LM2902QPWRG4Q1 개요
An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its two inputs. The quad LM2902 configuration places four high-gain, internally frequency-compensated operational amplifiers in one package. In the broader component hierarchy, this device belongs to the operational-amplifier family, analog amplifier ICs, and semiconductor-based signal-conditioning components. Each amplifier can operate independently when its supply and input common-mode requirements are met.
The principal features of the LM2902QPWRG4Q1 include four amplifier circuits, 0.5 V/µs slew rate, 80 dB common-mode rejection ratio, and a 1.2 MHz gain-bandwidth product. Its automotive-oriented temperature range of -40°C to 125°C supports operation across demanding vehicle and industrial environments. The 14-TSSOP package also provides a compact surface-mount footprint for four analog channels.
Internally, the LM2902-Q1 family uses four independent, high-gain, frequency-compensated operational amplifiers. This architecture allows one package to implement four analog functions without requiring separate amplifier packages. Its 0.5 V/µs slew rate determines how quickly an output can follow a changing input, while the 80 dB CMRR specification quantifies rejection of common-mode voltage applied to both inputs.
Typical uses include sensor signal conditioning, transducer amplification, analog summing, active filtering, low-level current-to-voltage conversion, and general instrumentation. Automotive applications can include conditioning signals from resistive sensors, bridge-based sensors, and interface electronics, provided the design observes the supply-voltage and input common-mode limits.
The primary design consideration is the relationship between supply voltage, output swing, input common-mode range, and the load connected to each amplifier. Because the LM2902 can operate from single or split supplies, output limits must be checked with the actual rail arrangement. Decoupling capacitors should be placed close to the supply pins, and unused amplifier inputs must be configured according to the manufacturer recommendations.
This page combines the exact LM2902QPWRG4Q1 specifications, source-linked documentation, package information, practical application guidance, and qualified drop-in alternatives. The comparison and design notes focus on engineering decisions that help shorten evaluation, footprint verification, and replacement planning for 14-pin TSSOP quad operational-amplifier designs.
드롭인 대체품: LM2902QPWRG4Q1 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: LM2902QPWRG4Q1 (동일 폼 팩터 및 풋프린트) — 차이점: Automotive Qualification, Supply Voltage.
LM2902QPWRQ1
✅ 드롭인가격 문의
데이터시트 보기 →LM2902KVQPWRQ1
✅ 드롭인가격 문의
데이터시트 보기 →LM2902QPWRG4Q1 최대 정격 & 전기적 특성
| Amplifier Type | General-purpose operational amplifier |
| Number of Circuits | 4 circuits |
| 공급 전압 | ±13 V to ±26 V |
| Maximum Supply Voltage | 26 V |
| Gain-Bandwidth Product | 1.2 MHz |
| Offset Voltage | 2 mV |
| Slew Rate | 0.5 V/µs |
| Common-Mode Rejection Ratio | 80 dB |
| Input Bias Current | 0.5 µA |
| 동작 온도 | -40°C to 125°C |
| Package Type | 14-TSSOP |
| Package Width | 4.40 mm |
| 핀 수 | 14 pins |
| 실장 유형 | Surface mount |
| Packaging | Tape and reel |
| Automotive Qualification | Automotive grade |
LM2902QPWRG4Q1 4.40 mm 핀 구성 가이드
LM2902QPWRG4Q1(4.40 mm 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: LM2902QPWRG4Q1.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
LM2902QPWRG4Q1 적합 용도: 6 애플리케이션s: Automotive Sensor Signal Conditioning, Industrial Transducer Amplification, Active Filtering and Control Loops, Current-to-Voltage Conversion, Audio and Communication Interfaces, Test and Measurement Front Ends.
Automotive Sensor Signal Conditioning
The LM2902QPWRG4Q1 fits automotive sensing interfaces that need several low-level amplification channels within one package. According to the Texas Instruments product page, the device provides four amplifiers, 80 dB CMRR, and operation from -40°C to 125°C, which helps reject common-mode noise while amplifying sensor-derived voltages. Use separate amplifier channels for signal conditioning, filtering, or thresholding, and verify the input common-mode range against the vehicle supply arrangement. The 26 V maximum supply rating supports higher-voltage industrial-style signal chains, but it does not remove the need to check output swing and load stability.
추천
Industrial Transducer Amplification
The LM2902QPWRG4Q1 is appropriate for amplifying weak signals from resistive and bridge-based industrial transducers. According to the manufacturer datasheet, the amplifier offers 80 dB CMRR and a 0.5 µA input-bias-current specification, helping preserve small differential signals when common-mode voltage is also present. The four internal amplifiers can support instrumentation stages, gain blocks, and active filters within one 14-pin TSSOP package. The 1.2 MHz gain-bandwidth product is sufficient for many sensor and process-control bandwidths, although the final noise, accuracy, and settling requirements must be evaluated against the specific transducer.
추천
Active Filtering and Control Loops
The LM2902QPWRG4Q1 can implement active low-pass, high-pass, and band-pass filters when four independent amplifier sections reduce board area. According to the Texas Instruments product page, the device has a 1.2 MHz gain-bandwidth product and 0.5 V/µs slew rate, providing useful bandwidth and dynamic-range capability for low-frequency control and measurement paths. Use resistor and capacitor values selected for the intended closed-loop response, then verify stability with the actual load and output capacitance. Its 26 V supply capability also allows the amplifier to operate in higher-voltage analog systems where a 5 V device would be unsuitable.
추천
Current-to-Voltage Conversion
The LM2902QPWRG4Q1 is useful in current-to-voltage conversion circuits where a small sensor current must become a measurable voltage. According to the manufacturer datasheet, the four amplifiers are high-gain and internally frequency-compensated, enabling conventional transimpedance topologies with external feedback components. The 80 dB CMRR characteristic helps reject shared supply and ground disturbances, while the 1.2 MHz gain-bandwidth product permits a range of practical feedback networks. Designers should still calculate total input capacitance, feedback resistance, and output-swing limits, because those network details determine usable bandwidth more than the nominal amplifier bandwidth alone.
추천
Audio and Communication Interfaces
The LM2902QPWRG4Q1 can serve as a general-purpose amplifier in low-frequency audio interface, buffer, and mixing circuits. According to the Texas Instruments datasheet, the 0.5 V/µs slew rate supports signal transitions required by many low-frequency audio paths, while the 26 V supply rating permits operation from higher-voltage rails. The internal frequency compensation simplifies basic closed-loop use and allows four amplifier functions to share one package. For high-fidelity audio, compare the device's noise and distortion against the system requirements, and include output filtering or gain-control circuitry where a fixed general-purpose amplifier is not sufficient.
추천
Test and Measurement Front Ends
The LM2902QPWRG4Q1 fits measurement front ends requiring buffering, channel multiplexing support, differential-to-single-ended conversion, or programmable-gain stages. According to the manufacturer product page, its four amplifier circuits, 80 dB CMRR, and -40°C to 125°C temperature range support robust analog conditioning around sensors and low-level sources. The 14-TSSOP package simplifies dense instrument layouts while the 26 V rating supports higher-voltage front ends. Select external precision resistors and capacitors according to the required accuracy, and verify offset, bias-current, and temperature drift over the complete measurement range.
추천
추천 제품 요약
엔지니어링 참조 데이터: LM2902QPWRG4Q1 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | LM2902QPWRQ1 | LM2902KVQPWRQ1 |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 14-TSSOP (PW) | 14-TSSOP (PW) | 14-TSSOP (PW) |
| Number of Circuits | 4 circuits | 4 circuits | 4 circuits |
| Amplifier Type | General-purpose operational amplifier | General-purpose operational amplifier | General-purpose operational amplifier |
주요 차별점
- Four independently usable amplifiers in one package (vs LM2902QPWRQ1)
- Automotive-grade ordering option (vs LM2902KVQPWRQ1)
- High-voltage general-purpose analog capability (vs LM2902QPWRQ1)
설계 노트
Place the supply-decoupling capacitor as close as practical to the power and ground pins of the TSSOP package. Keep analog input and output routing away from high-current switching paths, and provide a quiet return path for sensitive channels. Because the device contains four amplifiers, evaluate each channel independently for routing direction, output loading, and possible crosstalk rather than assuming the four sections are electrically interchangeable in every board-level implementation.
Check input common-mode voltage and output swing against the actual supply rails before finalizing the schematic. The LM2902QPWRG4Q1 supports operation from single or split supplies, but nominal 26 V capability does not mean every input and output can reach the positive rail. Use the manufacturer limits and application guidance to establish safe operating regions, then add headroom for signal peaks, temperature effects, and load-current variation.
Do not treat all four amplifier channels as permanently interchangeable when unused. Follow the datasheet instructions for unused inputs, configure feedback paths so outputs remain in their valid range, and confirm the maximum capacitive load for the selected stability configuration. For replacement projects, compare the complete pin-description table and electrical limits for the original and proposed ordering code rather than relying only on the package drawing.
Estimated thermal analysis must use the highest expected supply voltage, lowest required output voltage, maximum channel load, and highest ambient temperature. Calculate total dissipation from all four channels rather than evaluating only one amplifier. The manufacturer package limits establish the safe operating boundary, while PCB copper area and airflow determine how much of the allowed package temperature rise can be realized in the finished assembly.
규정 준수 정보
Texas Instruments identifies the device as automotive grade, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations appear in the cited source material.