Texas Instruments

LM2902QPWRG4Q1 - 26V Quad Automotive Op Amp | Texas Instruments

MPN: LM2902QPWRG4Q1 ✓ Aktif
±13 V to ±26 V Vdss 0.5 µA Id 14-TSSOP Package
MOQ: 1 |

LM2902QPWRG4Q1 Ringkasan

Texas Instruments LM2902QPWRG4Q1 is an automotive, general-purpose quad operational amplifier with four independent amplifiers, a 1.2 MHz gain-bandwidth product, and 2 mV offset voltage in a 14-pin TSSOP package rated for -40°C to 125°C operation. It supports supply voltages up to 26 V, making it suitable for industrial and automotive signal-conditioning systems.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its two inputs. The quad LM2902 configuration places four high-gain, internally frequency-compensated operational amplifiers in one package. In the broader component hierarchy, this device belongs to the operational-amplifier family, analog amplifier ICs, and semiconductor-based signal-conditioning components. Each amplifier can operate independently when its supply and input common-mode requirements are met.

The principal features of the LM2902QPWRG4Q1 include four amplifier circuits, 0.5 V/µs slew rate, 80 dB common-mode rejection ratio, and a 1.2 MHz gain-bandwidth product. Its automotive-oriented temperature range of -40°C to 125°C supports operation across demanding vehicle and industrial environments. The 14-TSSOP package also provides a compact surface-mount footprint for four analog channels.

Internally, the LM2902-Q1 family uses four independent, high-gain, frequency-compensated operational amplifiers. This architecture allows one package to implement four analog functions without requiring separate amplifier packages. Its 0.5 V/µs slew rate determines how quickly an output can follow a changing input, while the 80 dB CMRR specification quantifies rejection of common-mode voltage applied to both inputs.

Typical uses include sensor signal conditioning, transducer amplification, analog summing, active filtering, low-level current-to-voltage conversion, and general instrumentation. Automotive applications can include conditioning signals from resistive sensors, bridge-based sensors, and interface electronics, provided the design observes the supply-voltage and input common-mode limits.

The primary design consideration is the relationship between supply voltage, output swing, input common-mode range, and the load connected to each amplifier. Because the LM2902 can operate from single or split supplies, output limits must be checked with the actual rail arrangement. Decoupling capacitors should be placed close to the supply pins, and unused amplifier inputs must be configured according to the manufacturer recommendations.

This page combines the exact LM2902QPWRG4Q1 specifications, source-linked documentation, package information, practical application guidance, and qualified drop-in alternatives. The comparison and design notes focus on engineering decisions that help shorten evaluation, footprint verification, and replacement planning for 14-pin TSSOP quad operational-amplifier designs.

Alternatif penggantian untuk LM2902QPWRG4Q1 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian LM2902QPWRG4Q1 (sama faktor bentuk dan footprint) — berbeda di dalam Automotive Qualification, Supply Voltage.

Texas Instruments
Automotive Qualification: AEC-Q100 qualified
Supply Voltage: Up to 26 V
Bandingkan dengan LM2902QPWRG4Q1 →

LM2902QPWRQ1

✅ Drop-In
Texas Instruments
📦 14-TSSOP (PW)
4 circuits · Quad general-purpose operational amplifier · 26 V · 1.2 MHz · 2 mV · Single supply or split supply · High-gain, internally frequency-compensated

Kontak untuk harga

Lihat Datasheet →

LM2902KVQPWRQ1

✅ Drop-In
Texas Instruments
📦 14-TSSOP (PW)
Quad general-purpose operational amplifier · 4 circuits · Up to 26 V · 1.2 MHz · 2 mV · AEC-Q100 qualified · 14-pin TSSOP · Surface mount

Kontak untuk harga

Lihat Datasheet →

LM2902QPWRG4Q1 Rating Maksimal & Karakteristik Listrik

Amplifier Type General-purpose operational amplifier
Number of Circuits 4 circuits
Tegangan Pemuat ±13 V to ±26 V
Maximum Supply Voltage 26 V
Gain-Bandwidth Product 1.2 MHz
Offset Voltage 2 mV
Slew Rate 0.5 V/µs
Common-Mode Rejection Ratio 80 dB
Input Bias Current 0.5 µA
Suhu Kerja -40°C to 125°C
Package Type 14-TSSOP
Package Width 4.40 mm
Jumlah Pin 14 pins
Tipe Mounting Surface mount
Packaging Tape and reel
Automotive Qualification Automotive grade

LM2902QPWRG4Q1 4.40 mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk LM2902QPWRG4Q1 (4.40 mm pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai 4.40 mm untuk LM2902QPWRG4Q1

Tidak ada data diatribut pin yang tersedia untuk LM2902QPWRG4Q1.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

LM2902QPWRG4Q1 cocok untuk 6 aplikasis: Automotive Sensor Signal Conditioning, Industrial Transducer Amplification, Active Filtering and Control Loops, Current-to-Voltage Conversion, Audio and Communication Interfaces, Test and Measurement Front Ends.

🚗

Automotive Sensor Signal Conditioning

The LM2902QPWRG4Q1 fits automotive sensing interfaces that need several low-level amplification channels within one package. According to the Texas Instruments product page, the device provides four amplifiers, 80 dB CMRR, and operation from -40°C to 125°C, which helps reject common-mode noise while amplifying sensor-derived voltages. Use separate amplifier channels for signal conditioning, filtering, or thresholding, and verify the input common-mode range against the vehicle supply arrangement. The 26 V maximum supply rating supports higher-voltage industrial-style signal chains, but it does not remove the need to check output swing and load stability.

🏭

Industrial Transducer Amplification

The LM2902QPWRG4Q1 is appropriate for amplifying weak signals from resistive and bridge-based industrial transducers. According to the manufacturer datasheet, the amplifier offers 80 dB CMRR and a 0.5 µA input-bias-current specification, helping preserve small differential signals when common-mode voltage is also present. The four internal amplifiers can support instrumentation stages, gain blocks, and active filters within one 14-pin TSSOP package. The 1.2 MHz gain-bandwidth product is sufficient for many sensor and process-control bandwidths, although the final noise, accuracy, and settling requirements must be evaluated against the specific transducer.

🔧

Active Filtering and Control Loops

The LM2902QPWRG4Q1 can implement active low-pass, high-pass, and band-pass filters when four independent amplifier sections reduce board area. According to the Texas Instruments product page, the device has a 1.2 MHz gain-bandwidth product and 0.5 V/µs slew rate, providing useful bandwidth and dynamic-range capability for low-frequency control and measurement paths. Use resistor and capacitor values selected for the intended closed-loop response, then verify stability with the actual load and output capacitance. Its 26 V supply capability also allows the amplifier to operate in higher-voltage analog systems where a 5 V device would be unsuitable.

📟

Current-to-Voltage Conversion

The LM2902QPWRG4Q1 is useful in current-to-voltage conversion circuits where a small sensor current must become a measurable voltage. According to the manufacturer datasheet, the four amplifiers are high-gain and internally frequency-compensated, enabling conventional transimpedance topologies with external feedback components. The 80 dB CMRR characteristic helps reject shared supply and ground disturbances, while the 1.2 MHz gain-bandwidth product permits a range of practical feedback networks. Designers should still calculate total input capacitance, feedback resistance, and output-swing limits, because those network details determine usable bandwidth more than the nominal amplifier bandwidth alone.

🎧

Audio and Communication Interfaces

The LM2902QPWRG4Q1 can serve as a general-purpose amplifier in low-frequency audio interface, buffer, and mixing circuits. According to the Texas Instruments datasheet, the 0.5 V/µs slew rate supports signal transitions required by many low-frequency audio paths, while the 26 V supply rating permits operation from higher-voltage rails. The internal frequency compensation simplifies basic closed-loop use and allows four amplifier functions to share one package. For high-fidelity audio, compare the device's noise and distortion against the system requirements, and include output filtering or gain-control circuitry where a fixed general-purpose amplifier is not sufficient.

🖥️

Test and Measurement Front Ends

The LM2902QPWRG4Q1 fits measurement front ends requiring buffering, channel multiplexing support, differential-to-single-ended conversion, or programmable-gain stages. According to the manufacturer product page, its four amplifier circuits, 80 dB CMRR, and -40°C to 125°C temperature range support robust analog conditioning around sensors and low-level sources. The 14-TSSOP package simplifies dense instrument layouts while the 26 V rating supports higher-voltage front ends. Select external precision resistors and capacitors according to the required accuracy, and verify offset, bias-current, and temperature drift over the complete measurement range.

What is the LM2902QPWRG4Q1?
The LM2902QPWRG4Q1 is a four-circuit general-purpose operational amplifier from Texas Instruments. According to the manufacturer product page, the device is an automotive quad operational amplifier with a 1.2 MHz gain-bandwidth product, 2 mV offset voltage, operation from -40°C to 125°C, and a 14-pin TSSOP package. It is suitable for analog signal conditioning, filtering, sensing, and instrumentation requiring four amplifiers in one package.
What is the operating voltage of LM2902QPWRG4Q1?
The LM2902QPWRG4Q1 supports a maximum supply voltage of 26 V and is specified at ±13 V and ±26 V in the manufacturer documentation. According to the Texas Instruments datasheet, the four internal amplifiers can operate from a single supply or from split supplies when the total supply and common-mode conditions are respected. Actual operating voltage must remain within the device limits and must also preserve the required input and output ranges.
Where can I download the LM2902QPWRG4Q1 datasheet PDF?
The LM2902QPWRG4Q1 datasheet PDF is linked from the Texas Instruments product documentation and is also hosted by DiGi Electronics. According to the Texas Instruments datasheet, the document describes the LM2902-Q1, LM2902B-Q1, and LM2902BA-Q1 device families. Use the manufacturer copy for final pin assignments, limit values, application guidance, and qualification information before releasing a production design.
Where can I find the LM2902QPWRG4Q1 pinout?
The LM2902QPWRG4Q1 pinout is presented in the manufacturer datasheet for the 14-pin PW TSSOP package. According to the Texas Instruments product page, the package contains 14 pins and corresponds to the LM2902-Q1 family. Use the pin-description table in the datasheet when assigning each amplifier's non-inverting input, inverting input, output, supply, and ground connections.
What are the key specifications of LM2902QPWRG4Q1?
The key LM2902QPWRG4Q1 specifications are four amplifier circuits, 26 V maximum supply voltage, 1.2 MHz gain-bandwidth product, 2 mV offset voltage, 0.5 V/µs slew rate, 80 dB CMRR, and -40°C to 125°C operation. According to the Texas Instruments datasheet, the device uses a 14-pin TSSOP package. These parameters position it as a general-purpose amplifier for higher-voltage analog systems.
Is LM2902QPWRG4Q1 suitable for automotive applications?
The LM2902QPWRG4Q1 is designated as an automotive quad operational amplifier by Texas Instruments. According to the manufacturer product page, its specified operating-temperature range extends from -40°C to 125°C. The automotive designation and temperature specification make it appropriate for vehicle signal-conditioning systems, but production designs should also verify the applicable qualification documentation and all electrical limits.
What can replace the LM2902QPWRG4Q1?
The LM2902QPWRQ1 is the closest documented same-brand replacement candidate for the LM2902QPWRG4Q1 because it belongs to the same LM2902-Q1 family. A direct cross-brand equivalent should not be selected solely from generic descriptions; pin assignments, supply limits, offset, bandwidth, common-mode range, and temperature coverage must all be checked. The Request a Quote form can identify current sourcing options for an approved substitution.
What is the best Texas Instruments equivalent for LM2902QPWRG4Q1?
The LM2902QPWRQ1 is the best documented Texas Instruments family candidate for evaluating as a replacement for the LM2902QPWRG4Q1. Both are identified as LM2902-Q1 quad operational-amplifier devices, but the detailed ordering codes must be compared for package, temperature, and qualification differences. According to the Texas Instruments datasheet, the family shares the same fundamental four-amplifier architecture, making it the logical starting point for a same-brand substitution review.
LM2902QPWRG4Q1 vs LM2902QPWRQ1 - which is better?
The LM2902QPWRG4Q1 and LM2902QPWRQ1 are closely related same-brand devices, and the deciding factor is the exact ordering-code configuration rather than a broad functional difference. Compare the package, temperature grade, automotive status, offset tolerance, and production qualifications in the manufacturer documents. According to the Texas Instruments product documentation, both use the PW 14-pin TSSOP family platform.
Can LM2902KVQPWRQ1 replace LM2902QPWRG4Q1?
The LM2902KVQPWRQ1 may be considered for a drop-in review because it appears in a direct comparison with the LM2902QPWRG4Q1 and belongs to the same quad operational-amplifier family. According to the family description, it supports single-supply and split-supply operation, while the V designation relates to the device's voltage option. Verify the exact pinout and electrical limits before approving it as a drop-in replacement.
When should I choose LM2902QPWRG4Q1 over another quad op amp?
Choose the LM2902QPWRG4Q1 when a design needs four general-purpose amplifiers, a 14-pin TSSOP footprint, operation up to 26 V, and a -40°C to 125°C temperature range. According to the Texas Instruments product page, its key figures include 1.2 MHz gain-bandwidth and 2 mV offset. Select another amplifier only when its input range, output swing, noise, distortion, or precision requirements provide a clear engineering advantage.
Is LM2902QPWRG4Q1 suitable for sensor signal conditioning?
Yes, the LM2902QPWRG4Q1 is suitable for many sensor signal-conditioning applications. Its 80 dB CMRR, 0.5 µA input-bias-current specification, and 0.5 V/µs slew rate support low-level amplification and common-mode rejection. According to the manufacturer datasheet, the device is intended for general-purpose analog operation; sensor-specific accuracy still depends on biasing, resistor accuracy, noise, and output-range analysis.
What design considerations apply to LM2902QPWRG4Q1?
The principal LM2902QPWRG4Q1 design consideration is preserving the amplifier's input and output operating ranges within the selected supply rails. According to the Texas Instruments datasheet, the device can use single or split supplies and includes four internally frequency-compensated amplifiers. Place supply-decoupling capacitors close to the device, stabilize the output load as required, and configure every unused channel according to the manufacturer's guidance.
What is the power and thermal behavior of LM2902QPWRG4Q1?
The LM2902QPWRG4Q1 can dissipate power because its supply-voltage rating reaches 26 V, and the thermal load depends on supply voltage, output voltage, load current, and ambient temperature. According to the Texas Instruments product page, the device is specified from -40°C to 125°C. Use the datasheet's maximum supply, output-current, and thermal limits to calculate worst-case dissipation and copper requirements for the 14-pin TSSOP package.
Where to buy LM2902QPWRG4Q1 online?
Use the Request a Quote form on this page to ask for LM2902QPWRG4Q1 availability, current lead time, and order handling. The part is identified by Texas Instruments as a 14-pin PW TSSOP automotive quad operational amplifier. For production procurement, include the exact LM2902QPWRG4Q1 ordering code and tape-and-reel requirement so the supplier can confirm the correct manufacturer part and package configuration.
What is the price and lead time of LM2902QPWRG4Q1?
Current LM2902QPWRG4Q1 price and lead time should be requested through the Request a Quote form on this page. According to the Texas Instruments product page, the exact ordering code is a 14-pin TSSOP automotive quad operational amplifier rated for -40°C to 125°C. Submit the required quantity and packaging details with the inquiry so the quote reflects the exact LM2902QPWRG4Q1 configuration.

Data referensi engineering untuk LM2902QPWRG4Q1 — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the LM2902QPWRG4Q1 when the design needs four general-purpose amplifiers in a 14-pin TSSOP package, operation from -40°C to 125°C, and an automotive-grade ordering option. Evaluate LM2902QPWRQ1 when a closely related same-brand ordering code offers a simpler configuration, but verify its exact electrical ratings and qualification before substitution. Consider LM2902KVQPWRQ1 when its voltage-option characteristics fit the system, while checking maximum supply voltage and the complete pinout. Do not choose either alternative solely from amplifier count and package: CMRR, input bias current, offset, common-mode range, output swing, slew rate, and thermal behavior must satisfy the circuit. For precision or high-bandwidth applications, a purpose-specific amplifier may be preferable even when the LM2902 family is functionally adequate.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini LM2902QPWRQ1 LM2902KVQPWRQ1
Brand Texas Instruments Texas Instruments Texas Instruments
Package 14-TSSOP (PW) 14-TSSOP (PW) 14-TSSOP (PW)
Number of Circuits 4 circuits 4 circuits 4 circuits
Amplifier Type General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier

Diferensiator Kunci

  • Four independently usable amplifiers in one package (vsLM2902QPWRQ1)
  • Automotive-grade ordering option (vsLM2902KVQPWRQ1)
  • High-voltage general-purpose analog capability (vsLM2902QPWRQ1)

Catatan Desain

Place the supply-decoupling capacitor as close as practical to the power and ground pins of the TSSOP package. Keep analog input and output routing away from high-current switching paths, and provide a quiet return path for sensitive channels. Because the device contains four amplifiers, evaluate each channel independently for routing direction, output loading, and possible crosstalk rather than assuming the four sections are electrically interchangeable in every board-level implementation.

Check input common-mode voltage and output swing against the actual supply rails before finalizing the schematic. The LM2902QPWRG4Q1 supports operation from single or split supplies, but nominal 26 V capability does not mean every input and output can reach the positive rail. Use the manufacturer limits and application guidance to establish safe operating regions, then add headroom for signal peaks, temperature effects, and load-current variation.

Do not treat all four amplifier channels as permanently interchangeable when unused. Follow the datasheet instructions for unused inputs, configure feedback paths so outputs remain in their valid range, and confirm the maximum capacitive load for the selected stability configuration. For replacement projects, compare the complete pin-description table and electrical limits for the original and proposed ordering code rather than relying only on the package drawing.

Estimated thermal analysis must use the highest expected supply voltage, lowest required output voltage, maximum channel load, and highest ambient temperature. Calculate total dissipation from all four channels rather than evaluating only one amplifier. The manufacturer package limits establish the safe operating boundary, while PCB copper area and airflow determine how much of the allowed package temperature rise can be realized in the finished assembly.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

Texas Instruments identifies the device as automotive grade, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations appear in the cited source material.

Pencarian Terkait

LM2902QPWRG4Q1 datasheet LM2902QPWRG4Q1 pinout LM2902QPWRG4Q1 datasheet pdf LM2902QPWRG4Q1 specifications LM2902QPWRG4Q1 equivalent LM2902QPWRG4Q1 replacement LM2902QPWRG4Q1 cross reference LM2902QPWRG4Q1 vs LM2902QPWRQ1 LM2902QPWRG4Q1 TSSOP footprint LM2902QPWRG4Q1 application circuit Texas Instruments LM2902QPWRG4Q1 LM2902QPWRG4Q1 price LM2902QPWRG4Q1 stock 14-TSSOP quad op amp 26V

Komponen dan Istilah Terkait

Texas Instruments LM2902QPWRG4Q1 LM2902QPWRQ1 LM2902KVQPWRQ1 LM2902-Q1 LM2902B-Q1 LM2902BA-Q1 quad operational amplifier operational amplifier analog amplifier IC signal-conditioning IC semiconductor 14-TSSOP PW package surface-mount package gain-bandwidth product common-mode rejection ratio CMRR slew rate input bias current offset voltage automotive electronics active filter current-to-voltage converter RoHS REACH AEC-Q100
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ