Texas Instruments

LM2904BAIDR - Dual 36V 1.2MHz Op Amp | Texas Instruments

Référence : LM2904BAIDR ✓ Actif
36 V Vdss 8-pin SOIC Package
MOQ : 1 |

LM2904BAIDR Présentation

The Texas Instruments LM2904BAIDR is a dual, general-purpose operational amplifier optimized for operation from a 3 V to 36 V supply in an 8-pin SOIC package. Each amplifier channel offers a gain bandwidth product of 1.2 MHz and an input offset voltage of up to 2 mV. The device is designed for general-purpose signal conditioning across industrial, instrumentation, audio, communications, and control applications where a wide supply-voltage range and two amplifiers per package simplify board allocation.

An operational amplifier is an analog signal-processing IC that amplifies the voltage difference between its inverting and non-inverting inputs. Within the broader hierarchy, an operational amplifier belongs to the amplifier IC family and ultimately serves as a building block in analog, mixed-signal, and control systems. Unlike a discrete transistor stage, a dual operational amplifier integrates gain stages, biasing, compensation, output drivers, and protection functions into one package.

The LM2904BAIDR provides two independent amplifier channels, a 1.2 MHz gain bandwidth product, and offset voltage specified to 2 mV. Its 36 V maximum supply rating provides additional operating headroom for industrial systems and laboratory equipment. The operating temperature range extends from -40°C to 125°C, supporting applications across commercial and industrial temperature environments. The 8-pin SOIC footprint also supports conventional surface-mount assembly and hand-soldering workflows.

Texas Instruments positions the LM2904B family as an upgraded functional relative to the original LM2904 family. The LM2904B page identifies a 36 V maximum supply voltage and 1.2 MHz gain bandwidth product, while the original LM2904 page identifies a 26 V maximum supply voltage and 700 kHz gain bandwidth product. This generational increase provides more bandwidth and supply-voltage headroom without changing the familiar dual-amplifier architecture.

Typical uses include low-frequency instrumentation, industrial sensor interfaces, audio preamplification, communications equipment, active filtering, comparators, and general DC signal amplification. Two channels can implement differential, summing, feedback, or multi-stage amplifier arrangements. The 1.2 MHz bandwidth makes the device most appropriate for signals well below the upper practical frequency range of this general-purpose amplifier family.

Designers should verify the input common-mode range, output swing, input bias current, noise, and load capability against their actual operating conditions. Decoupling capacitors should be placed close to the supply pins, and sensitive analog inputs should be routed away from switching nodes. The two amplifier outputs should not be tied together unless the application explicitly supports a particular parallel-output configuration.

This page combines the LM2904BAIDR ordering information, principal electrical ratings, lifecycle context, and family-level replacement guidance. It also identifies same-package alternatives and explains when the original LM2904, the enhanced LM2904B, or the specifically ordered BA suffix best matches a design requirement.

Alternatives de remplacement direct pour LM2904BAIDR — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec LM2904BAIDR (même facteur de forme et même empreinte) — différant par Amplifier Type, Input Offset Voltage, Number of Channels, Package, Operating Temperature Range.

Texas Instruments
Input Offset Voltage: 0.5 mV typical / 3 mV maximum
Number of Channels: 2 (Dual)
Package: SOIC-8 (D)
Comparer avec LM2904BAIDR →
Texas Instruments
Amplifier Type: General Purpose
Input Offset Voltage: 2 mV (typical)
Number of Channels: 2
Comparer avec LM2904BAIDR →
Texas Instruments
Amplifier Type: General Purpose
Input Offset Voltage: 2 mV (typical)
Number of Channels: 2
Comparer avec LM2904BAIDR →
Texas Instruments
Amplifier Type: General-Purpose Operational Amplifier
Number of Channels: 2 channels
Operating Temperature Range: -40 °C to 125 °C
Comparer avec LM2904BAIDR →

LM2904BIDR

✅ Remplacement direct ⚠️ Spécifications non vérifiées
Texas Instruments
📦 SOIC-8
Texas Instruments · Industry-standard dual operational amplifier · 2 (Dual) · 3 V to 36 V · +/-1.5 V to +/-18 V · 1.2 MHz · 0.5 V/us (typical) · 0.5 mV typical / 3 mV maximum

Contactez-nous pour le prix

Voir la fiche technique →

LM2904AIDR

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 SOIC-8
Uses the same 8-pin SOIC footprint, but the original LM2904-family listing shows 700 kHz bandwidth rather than 1.2 MHz, a 42% reduction.

📋 Alternative de référence (hors catalogue)

LM2904ADR

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 SOIC-8
Uses the same 8-pin SOIC footprint, but the original LM2904-family supply rating is 26 V versus 36 V, a 28% reduction.

📋 Alternative de référence (hors catalogue)

LM2904DR

✅ Remplacement direct ⚠️ Spécifications non vérifiées
Texas Instruments
📦 SOIC-8
2 · 3 V to 26 V · ±1.5 V to ±13 V · 700 kHz · 0.3 V/us · 2 mV (typical) · 500 uA (typical) · 0.7 mA (typical)

Contactez-nous pour le prix

Voir la fiche technique →

LM2904D

✅ Remplacement direct ⚠️ Spécifications non vérifiées
Texas Instruments
📦 SOIC-8
2 · 3 V to 26 V · ±1.5 V to ±13 V · 700 kHz · 0.3 V/us · 2 mV (typical) · 500 uA (typical) · 0.7 mA (typical)

Contactez-nous pour le prix

Voir la fiche technique →

LM2904BAIDR Valeurs maximales et caractéristiques électriques

Amplifier Type Dual general-purpose operational amplifier
Number of Circuits 2 circuits
Maximum Supply Voltage 36 V
Gain Bandwidth Product 1.2 MHz
Input Offset Voltage 2 mV maximum
Plage de température de fonctionnement -40°C to +125°C
Boîtier 8-pin SOIC
Type de montage Surface mount
Channel Count 2 channels
Original LM2904 Maximum Supply Voltage 26 V
Original LM2904 Gain Bandwidth Product 700 kHz

Configuration des broches de LM2904BAIDR

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Broche 1 OUT1 — Output of amplifier channel 1
Broche 2 IN1- — Inverting input of amplifier channel 1
Broche 3 IN1+ — Non-inverting input of amplifier channel 1
Broche 4 V- — Negative supply connection
Broche 5 IN2+ — Non-inverting input of amplifier channel 2
Broche 6 IN2- — Inverting input of amplifier channel 2
Broche 7 OUT2 — Output of amplifier channel 2
Broche 8 V+ — Positive supply connection

Applications typiques

LM2904BAIDR convient pour 6 applications: Industrial Sensor Signal Conditioning, Audio Preamplification, Communications Interface Amplification, Active Filters and Control Loops, Power Supply Monitoring and Feedback, Portable Battery-Powered Measurement.

🏭

Industrial Sensor Signal Conditioning

The LM2904BAIDR is well suited to conditioning low-frequency industrial sensor signals because its dual 1.2 MHz channels provide useful bandwidth for common pressure, temperature, and position transducer stages. The 36 V maximum supply rating provides additional headroom for 24 V industrial systems, while the -40°C to 125°C operating range supports equipment deployed across varied ambient conditions. Two channels can form a non-inverting stage followed by an active low-pass filter, or they can implement differential excitation and readout where source impedances remain compatible with the amplifier's input-bias and common-mode limits. A regulated bypass capacitor near the supply pins and short, shielded analog traces help reduce susceptibility to industrial noise. Verify the input common-mode range, output swing, sensor grounding method, and required precision before finalizing the signal chain.

🎧

Audio Preamplification

The LM2904BAIDR can implement low-frequency audio preamplification with two independent channels in a compact 8-pin SOIC package. Its 1.2 MHz gain bandwidth product is substantially above the audio band, leaving practical headroom for gain stages and moderate low-pass filtering around the signal path. The dual arrangement supports balanced input stages, stereo preamplifiers, microphone boosters, and active tone controls. Actual audio quality depends on voltage noise, input bias current, common-mode range, and output swing, so source impedance and loading must be checked against the manufacturer limits. For a quiet source, add a suitable bypass capacitor at each supply pin and keep the return path close to the analog ground reference. The 36 V rating also permits operation from higher legacy supply rails when the circuit does not otherwise exceed the amplifier's operating limits.

🌐

Communications Interface Amplification

The LM2904BAIDR is applicable in communications equipment that requires two low-frequency amplification or filtering channels within a 36 V supply environment. The 1.2 MHz gain bandwidth can support receiver-interface gain, threshold shaping, and modest band-limiting stages without approaching the amplifier's upper bandwidth limit. Its dual channel count reduces the number of packages required for a balanced receiver or a two-stage interface. Designers should account for the exact input common-mode range, output swing, and load impedance because a valid package pinout alone does not guarantee signal compatibility. Keep the input and feedback traces short, use a low-noise local supply bypass capacitor, and maintain a single-point ground reference where possible. For line-card equipment operating from a 12 V or 24 V rail, confirm ripple, startup behavior, and output drive at the highest expected signal and load conditions.

🔧

Active Filters and Control Loops

The LM2904BAIDR is suitable for active filters and low-frequency control loops where two amplifiers are needed to form second-order or multi-stage networks. A 1.2 MHz gain bandwidth product allows useful loop gain above the intended filter or control bandwidth, while each channel can provide inversion, non-inversion, integration, or active-feedback functions. Component tolerances and amplifier open-loop behavior will influence the achieved response, so validate stability and gain margin in simulation with realistic loading. Place feedback resistors and capacitors close to their corresponding pins, avoid long high-impedance nodes, and provide local supply decoupling to reduce phase perturbations from supply impedance. The 8-pin SOIC package offers a conventional surface-mount assembly format and can reduce board area compared with two single-amplifier packages. Confirm output-current capability when the filter drives a downstream ADC, sensor, or relay-driver input.

⚡

Power Supply Monitoring and Feedback

The LM2904BAIDR can compare a divided feedback voltage against a reference and provide an amplified error signal for slow power-supply monitoring or laboratory regulation loops. The 36 V maximum supply voltage gives the amplifier ample nominal operating range on many 12 V or 24 V industrial rails, while the two channels can monitor positive and negative outputs or implement a differential sensing arrangement. Stable operation requires checking the input common-mode limits around the reference node, the output swing near the error-signal limits, and the load presented by the feedback controller. A local bypass capacitor helps maintain supply impedance over the control bandwidth. Keep the high-impedance divider and reference nodes away from switching power stages, and evaluate loop compensation under minimum and maximum load conditions. The amplifier's 1.2 MHz bandwidth is generally more than adequate for slow supervisory loops but does not remove the need for deliberate compensation.

📱

Portable Battery-Powered Measurement

The LM2904BAIDR can serve in portable battery-powered measurement equipment when its two amplifier channels and low-voltage operation are adequate for the selected supply. Its 1.2 MHz gain bandwidth supports gain and filtering stages for many low-frequency sensors without requiring two separate packages. The 36 V maximum supply rating does not require a 36 V rail; it defines the upper limit, allowing operation from lower battery-derived voltages when the minimum supply and input/output ranges remain valid. Low-power design decisions should include the amplifier quiescent current, which is not established by the product-page summary, as well as the load current and regulator efficiency. Place bypass capacitance at the supply pins, keep input nodes at high impedance, and use a low-leakage protection network when the source can be disconnected. Confirm battery-range operation across temperature and verify offset stability for the required measurement accuracy.

What is the LM2904BAIDR datasheet PDF?
The LM2904BAIDR datasheet is available from Texas Instruments through the LM2904B product page at https://www.ti.com/product/LM2904B. The page also provides ordering information, quality data, and links to the manufacturer documentation. The product is identified as a dual operational amplifier with a 36 V maximum supply voltage and a 1.2 MHz gain bandwidth product, while the distributor data describes the exact LM2904BAIDR orderable as an 8-pin SOIC device.
Where can I find the LM2904BAIDR pinout?
The LM2904BAIDR pinout is documented with the LM2904B family information on the Texas Instruments product page at https://www.ti.com/product/LM2904B. The exact orderable is packaged as an 8-pin SOIC with two operational-amplifier channels. Assign PCB tracks using the manufacturer pin-description table and package drawing rather than relying only on amplifier-function assumptions, because the two channels share common supply pins.
What are the key specifications of LM2904BAIDR engineers should know?
The LM2904BAIDR is a dual, general-purpose operational amplifier with a 36 V maximum supply voltage, 1.2 MHz gain bandwidth product, and input offset voltage specified to 2 mV. It operates from -40°C to 125°C and is supplied in an 8-pin SOIC package. According to the Texas Instruments LM2904B product page, the LM2904B family is an upgraded version of the original LM2904, whose listed maximum supply voltage and bandwidth are 26 V and 700 kHz.
How does LM2904BAIDR differ from the original LM2904?
The LM2904BAIDR belongs to the LM2904B family, which increases the listed maximum supply voltage from 26 V in the original LM2904 to 36 V and raises gain bandwidth from 700 kHz to 1.2 MHz. Both provide a dual general-purpose amplifier architecture. Texas Instruments describes LM2904B as an upgraded functional relative to LM2904, so existing dual-amplifier layouts can be evaluated as drop-in opportunities when their electrical limits remain acceptable.
When should I choose LM2904BAIDR over LM2904AIDR?
Choose LM2904BAIDR when the circuit can benefit from the LM2904B family's 1.2 MHz gain bandwidth and 36 V maximum supply voltage, particularly in industrial environments with more supply-voltage headroom. Choose LM2904AIDR when a legacy A-grade LM2904 configuration is preferred for continuity with an existing qualified design. The decision should also consider offset voltage, common-mode range, output swing, temperature grade, and qualification requirements listed for the selected orderable.
Is LM2904BAIDR suitable for industrial instrumentation?
The LM2904BAIDR is suitable for many industrial instrumentation tasks because it combines two amplifiers, a 36 V maximum supply voltage, 1.2 MHz bandwidth, and an operating range of -40°C to 125°C. It is appropriate for sensor conditioning, low-frequency active filters, buffer stages, and general feedback amplifiers when its input common-mode range and output swing satisfy the signal. Confirm grounding, noise, bias-current, and precision requirements before using it in a high-accuracy measurement path.
What can replace LM2904BAIDR in an 8-pin SOIC footprint?
LM2904BIDR is the closest same-brand candidate because it is the standard 8-pin SOIC ordering option for the enhanced LM2904B family and shares the 36 V and 1.2 MHz family ratings. Other LM2904-family SOIC orderables can be considered when their offset, bias, noise, temperature, and qualification specifications meet the circuit limits. Use the manufacturer pin table and compare all operating conditions before treating any candidate as a drop-in replacement.
Is LM2904BAIDR the same as LM2904BIDR?
No, LM2904BAIDR and LM2904BIDR are distinct ordering codes within the LM2904B family. LM2904BAIDR specifically identifies the BA version in an 8-pin SOIC package, while LM2904BIDR identifies the B version in an 8-pin SOIC package. Both share the family-level 36 V maximum supply rating and 1.2 MHz gain bandwidth, but ordering-specific electrical limits, temperature grades, and qualification details should be checked for each MPN.
LM2904BAIDR vs LM2904BIDR: which is better for an industrial design?
LM2904BIDR is generally the better continuity choice for a design explicitly standardized around the standard LM2904B orderable because both use the 8-pin SOIC footprint and share the 36 V maximum supply voltage and 1.2 MHz gain bandwidth. LM2904BAIDR remains appropriate when the BA ordering code is required by qualification, temperature, or approved-BOM rules. Review offset voltage, input bias current, common-mode range, and automotive or industrial qualification before final selection.
Is LM2904BAIDR suitable for audio preamplifier circuits?
The LM2904BAIDR can be used in audio preamplifier and active-filter circuits when the signal bandwidth is compatible with its 1.2 MHz gain bandwidth product. Its two channels support common non-inverting, inverting, differential, or summing arrangements. For low-noise audio work, also evaluate voltage noise, input bias current, output drive, and maximum output swing against the source impedance and load. The 8-pin SOIC package is useful where one amplifier stage per channel is required.
What are the power and thermal considerations for LM2904BAIDR?
LM2904BAIDR should be evaluated for internal power dissipation at the actual supply voltage, load current, and ambient temperature. The 36 V rating identifies the maximum permitted supply condition but does not mean the amplifier should be operated continuously at 36 V. Keep copper and thermal paths adequate for the SOIC package, use a stable local bypass capacitor, and check output-current limits when driving a low-impedance load. Texas Instruments provides the authoritative electrical limits for final thermal verification.
How do I buy LM2904BAIDR and check its current lead time?
Use the Request a Quote form on this page to request LM2904BAIDR availability, current unit pricing, minimum order quantity, and production lead time. The exact MPN is listed in distributor channels as an active Texas Instruments 8-pin SOIC dual operational amplifier. Quote requests are the appropriate channel for current commercial terms because inventory, scheduled delivery, and order quantities can change independently of the device specifications.
What is the current price of LM2904BAIDR?
The current commercial price for LM2904BAIDR is available through the Request a Quote form on this page. Submit the required quantity and delivery location so the quote reflects current inventory, order breaks, and production scheduling. The exact LM2904BAIDR ordering code is an 8-pin SOIC dual operational amplifier rated for up to 36 V, 1.2 MHz gain bandwidth, and operation from -40°C to 125°C.
Is LM2904BAIDR in stock?
Current LM2904BAIDR stock status should be confirmed through the Request a Quote form on this page because availability can vary by order quantity and delivery schedule. Distributor listings identify the exact 8-pin SOIC orderable, and Texas Instruments provides the ordering and lifecycle information for the LM2904B family. Provide your required quantities, target date, and shipment destination when requesting a quotation.
Where to download LM2904BAIDR documentation and ordering information?
Download or view LM2904BAIDR documentation from the Texas Instruments LM2904B product page at https://www.ti.com/product/LM2904B. The manufacturer page is the preferred source for the family datasheet, package information, ordering options, and quality documentation. The distributor listing for the exact MPN is https://www.digikey.com/en/products/detail/texas-instruments/LM2904BAIDR/10715427, while the Mouser listing identifies the same 36 V, 1.2 MHz dual-amplifier configuration.

Données de référence d'ingénierie pour LM2904BAIDR — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose LM2904BAIDR for general-purpose dual amplification with a 1.2 MHz gain bandwidth, a 36 V maximum supply, and an 8-pin SOIC footprint. It is appropriate for industrial instrumentation, audio preamplification, communications interfaces, active filtering, and low-frequency control loops when its common-mode range, output swing, and bias-current characteristics satisfy the circuit. Choose LM2904BIDR when the standard LM2904B ordering code is required for approved-BOM or qualification continuity. Choose LM2904AIDR, LM2904ADR, LM2904DR, or LM2904D for an existing original-family design that can accept the listed reduction from 1.2 MHz to 700 kHz and, where applicable, from 36 V to 26 V. None of the alternatives should be selected solely from package matching; verify offset voltage, noise, bias current, temperature grade, and qualification before substitution.

Comparaison avec les alternatives

Paramètre Ce produit LM2904BIDR LM2904AIDR LM2904ADR LM2904DR LM2904D
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package SOIC-8 SOIC-8 SOIC-8 SOIC-8 SOIC-8 SOIC-8
Gain Bandwidth Product 1.2 MHz 1.2 MHz 700 kHz for original LM2904 family 700 kHz for original LM2904 family 700 kHz for original LM2904 family 700 kHz for original LM2904 family
Number of Amplifiers 2 2 2 2 2 2
Product Family LM2904B LM2904B LM2904 LM2904 LM2904 LM2904
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount Surface mount
Special Ordering Feature BA ordering code Standard B ordering code A ordering code A ordering code Standard ordering code Base ordering code

Principaux différenciateurs

  • Higher bandwidth than the original LM2904 family (vs LM2904DR)
  • Greater supply-voltage headroom (vs LM2904ADR)
  • Two channels in one standard SOIC footprint (vs LM324WDT)
  • Direct family continuity without changing the PCB footprint (vs LM2904BIDR)

Notes de conception

Place the supply bypass capacitor as close as practical to pins 4 and 8, with a short, low-impedance return path. For dual-amplifier layouts, route each channel's inverting-input feedback network close to its assigned amplifier and avoid routing between channels whenever possible. High-impedance non-inverting inputs are particularly susceptible to leakage and coupling, so minimize exposed trace length and keep them away from switching nodes, inductors, and power-supply traces.

The 36 V rating is a maximum operating limit, not a required supply voltage. Check the minimum operating voltage, input common-mode range, quiescent current, and output swing against the actual rail. A dual amplifier operating from a 24 V system still requires adequate headroom for its input signals and output swing. Use local regulation where necessary rather than allowing supply excursions to approach the 36 V maximum.

Do not assume that identical package outlines guarantee identical behavior. Compare offset voltage, input bias current, noise, common-mode range, output swing, slew rate, temperature grade, and qualification for every replacement candidate. The original LM2904 family is listed at 26 V and 700 kHz, while LM2904B is listed at 36 V and 1.2 MHz; substituting an original-family device into a design that relies on the enhanced limits may compromise margin.

Estimate dissipation from the actual output load and the voltage dropped across the output stage rather than from the full supply voltage alone. Verify that the load does not exceed the amplifier's output-current capability and provide adequate SOIC copper area for ambient-temperature operation. If both channels drive sustained heavy loads, evaluate each channel independently because shared package heating can raise the junction temperature of the complete device.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The LM2904B is a general-purpose operational amplifier, so AEC-Q100 is not applicable as an automotive qualification category. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established by the cited product-page summaries.

Données vérifiées le : 2026-11-17 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

lm2904baidr datasheet LM2904BAIDR pinout LM2904BAIDR datasheet pdf LM2904BAIDR equivalent LM2904BAIDR replacement LM2904BAIDR cross reference LM2904BAIDR vs LM2904BIDR LM2904BAIDR price LM2904BAIDR stock Texas Instruments LM2904BAIDR LM2904BAIDR SOIC-8 footprint LM2904BAIDR application circuit LM2904BAIDR 36V 1.2MHz

Composants & termes associés

Texas Instruments LM2904BAIDR LM2904BIDR LM2904AIDR LM2904ADR LM2904DR LM2904D LM2904B dual operational amplifier operational amplifier amplifier IC analog signal conditioning gain bandwidth product input offset voltage 36 V maximum supply voltage 1.2 MHz SOIC-8 SOIC surface-mount package industrial instrumentation audio preamplifier active filter control loop power-supply feedback temperature range -40°C to 125°C
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ