LM3481MMX/NOPB - 2.97-48V Boost/SEPIC/Flyback Controller | TI
Référence : LM3481MMX/NOPB ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $2.1 | $2,10 |
| 10 | $1.89 | $18,90 |
| 100 | $1.45 | $145,00 |
| 500 | $1.1 | $550,00 |
| 1 000 | $0.9 | $900,00 |
LM3481MMX/NOPB Présentation
A DC-DC switching controller is an integrated circuit that manages the power conversion process by controlling external power switches (typically MOSFETs) to regulate output voltage or current. Unlike linear regulators, switching controllers offer high efficiency, especially when there is a large difference between input and output voltages. The LM3481 belongs to the family of current-mode PWM controllers, which provide robust line and load regulation and simplified loop compensation. This controller is part of the broader category of power management ICs, essential for modern electronic systems.
Key features of the LM3481MMX/NOPB include current-mode PWM control, a wide input voltage range, and an adjustable switching frequency up to 1MHz. It also features a built-in soft-start, cycle-by-cycle current limiting, and thermal shutdown protection. The device can drive an external N-channel MOSFET, enabling high-current applications that would be impractical with integrated-switch regulators. Its low quiescent current and high efficiency make it ideal for battery-powered and energy-conscious designs.
Technically, the LM3481 uses a current-mode control architecture, which provides inherent feed-forward compensation and simplifies the design of the feedback loop. The controller includes a precision reference, error amplifier, and PWM comparator. It also offers a shutdown pin for power sequencing and a frequency synchronization pin for noise-sensitive systems. The device is specified for operation over the industrial temperature range of -40C to 125C, ensuring reliability in harsh environments.
Typical applications include automotive power supplies, industrial power systems, LED drivers, and battery chargers. The wide input range and ability to implement boost, SEPIC, and flyback topologies make it a versatile choice for designers.
When designing with the LM3481, careful attention must be paid to the external MOSFET selection, inductor sizing, and loop compensation to ensure stable operation across all load conditions. The datasheet provides detailed design equations and application circuits to guide the designer.
Alternatives de remplacement direct pour LM3481MMX/NOPB — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec LM3481MMX/NOPB (même facteur de forme et même empreinte) — différant par Package, RoHS Status, Topology.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
LM3481QMMX/NOPBQ1
✅ Remplacement direct✓ En stock
$1.95 / unité
Voir la fiche technique →LM3481MM/NOPB
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
LM3478MMX/NOPB
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
LM3481MMX/NOPB Valeurs maximales et caractéristiques électriques
| Topologie | Boost, Flyback, SEPIC |
| Control Method | Current Mode PWM |
| Plage de tension d'entrée | 2.97 V to 48 V |
| Nombre de sorties | 1 |
| Fréquence de commutation | Adjustable up to 1 MHz |
| Maximum Duty Cycle | 85% |
| Output Switch Driver | External low-side N-channel MOSFET |
| Caractéristiques | Soft-start, cycle-by-cycle current limit, thermal shutdown, shutdown pin, freq sync |
| Température de fonctionnement | -40C to +125C |
| Boîtier | VSSOP-10 (DGS) |
| Package Description | 10-TFSOP, 10-MSOP, 3.00 mm width |
| Type de montage | Surface Mount |
| Packaging | Tape & Reel (TR) |
| Supplier Device Package | 10-VSSOP |
| Statut RoHS | Compliant (NOPB - no Pb) |
| PWM Type | Current Mode |
Configuration des broches de LM3481MMX/NOPB
| Broche 1 | AGND — Analog ground reference |
| Broche 2 | VIN — Input supply, 2.97V to 48V |
| Broche 3 | ISENSE — Current sense input for cycle-by-cycle current limit |
| Broche 4 | FREQ — Frequency set / synchronization pin |
| Broche 5 | SS — Soft-start programming capacitor |
| Broche 6 | COMP — Error amplifier output for loop compensation |
| Broche 7 | FB — Feedback input from output divider (1.26V ref) |
| Broche 8 | SHUTDOWN — Shutdown and standby control pin |
| Broche 9 | PGND — Power ground for gate driver |
| Broche 10 | OUT — Gate drive output to external N-channel MOSFET |
Applications typiques
LM3481MMX/NOPB convient pour 6 applications: Automotive Power Supplies, Industrial Power Systems, LED Drivers, Battery-Powered Portable Devices, Battery Chargers, RF and Noise-Sensitive Rails.
Automotive Power Supplies
The LM3481 fits automotive 12V/24V rail conditioning where input transients demand wide headroom: its 2.97V-48V input range tolerates load-dump-adjacent conditions, and the AEC-Q100 LM3481QMMX/NOPBQ1 variant covers temperature grade requirements. In a boost configuration it steps battery voltage up to regulated 5V/12V rails for ECUs and infotainment. Cycle-by-cycle current limiting and thermal shutdown provide fault protection. Designers should add input TVS protection and verify duty cycle margin, as the 85% maximum limits very high step-up ratios at low battery voltage.
Recommandé
Industrial Power Systems
Industrial PLC and instrumentation boards often combine 24V backplanes with low-voltage logic, and the LM3481 bridges this efficiently in SEPIC or flyback configurations. The 48V maximum input covers nominal 24V rails with margin, while 1 MHz operation shrinks magnetics for dense DIN-rail modules. Current-mode control provides fast transient response for motor-control and I/O subsystems. Layout discipline is essential: keep the power loop short and route the ISENSE line kelvin-connected to minimize switching noise in the current-limit threshold.
Recommandé
LED Drivers
Constant-current LED strings benefit from the LM3481's current-mode architecture: sensing LED current on the FB pin enables accurate regulation, while up to 1 MHz switching allows small inductors in slim luminaire form factors. Boost topology powers long LED strings above the input rail; SEPIC handles dimming input from partially charged batteries. With 48V input capability, high-brightness strings on 24V industrial lighting buses are practical. The shutdown pin supports PWM dimming interfaces, and soft-start prevents current overshoot during lamp ignition.
Recommandé
Battery-Powered Portable Devices
For single-cell Li-ion (2.97V-4.2V) or multi-cell alkaline products, the LM3481's low startup input of 2.97V and high efficiency preserve battery life while generating 5V or 12V rails for displays, sensors, and RF modules. The adjustable frequency feature lets designers trade efficiency against magnetic size, and low quiescent consumption plus shutdown pin enable low standby drain. Because the controller drives an external MOSFET, output power scales with the selected switch rather than a fixed internal limit, making one controller reusable across a product family.
Recommandé
Battery Chargers
Charger front ends require wide input tolerance and robust current control, both core LM3481 strengths. Implementing a SEPIC converter allows charging from sources above, below, or equal to the battery voltage - useful for USB, solar-panel, and vehicle inputs feeding 3-4 cell packs. Cycle-by-cycle current limiting doubles as fast-charge current control when the FB loop regulates sensed current. The 48V input ceiling supports 48V telecom charging stacks. Designers must verify inductor saturation at peak switch currents and provide a well-damped compensation network for stable CC/CV transitions.
Recommandé
RF and Noise-Sensitive Rails
RF front-end and PLL/VCO supplies benefit from the LM3481's frequency synchronization pin, which locks switching operation to a system clock and moves switching spurs to a predictable, filterable spectral location. Boost or SEPIC stages generate clean 5V or negative-bias-class rails from 12V/24V backplanes, followed by an LDO such as the TPS7A family for final noise filtering. Keeping the switching frequency above 500 kHz places ripple where ferrite filtering is most effective, and current-mode control simplifies compensation across RF load transients.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour LM3481MMX/NOPB — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | LM3481QMMX/NOPBQ1 | LM3481MM/NOPB | LM3478MMX/NOPB | LM5117PMH/NOPB |
|---|---|---|---|---|---|
| Package | VSSOP-10 (DGS) | VSSOP-10 (DGS) - same | VSSOP-10 (DGS) - same | VSSOP-10 (DGS) - same | TSSOP-16 (PWP) - different |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Input Voltage Range | 2.97V to 48V | 2.97V to 48V | 2.97V to 48V | 2.97V to ~40V | 5.5V to 65V |
| Switching Frequency | Adjustable up to 1 MHz | Adjustable up to 1 MHz | Adjustable up to 1 MHz | Adjustable up to 1 MHz | Adjustable up to 750 kHz |
| Control Method | Current Mode PWM | Current Mode PWM | Current Mode PWM | Current Mode PWM | Peak Current Mode (EMI-tolerant) |
| Topologies | Boost, Flyback, SEPIC | Boost, Flyback, SEPIC | Boost, Flyback, SEPIC | Boost, Flyback, SEPIC | Boost, Flyback, SEPIC, Buck-Boost |
| Temperature Range | -40C to +125C | -40C to +125C (AEC-Q100) | -40C to +125C | -40C to +125C | -40C to +125C |
| Pin Compatibility | Reference (VSSOP-10) | Pin-to-pin drop-in | Pin-to-pin drop-in | Pin-to-pin compatible | Not pin compatible |
Principaux différenciateurs
- 48V maximum input in tiny VSSOP-10 (vs LM3478MMX/NOPB)
- Automotive qualified drop-in available (vs LM3481QMMX/NOPBQ1)
- External MOSFET scales output power (vs LM5117PMH/NOPB)
Notes de conception
Keep the power loop (input capacitor, MOSFET, inductor/transformer primary, sense resistor) as short as possible to minimize switching ringing and EMI. Connect the ISENSE pin to the sense resistor using a Kelvin trace that does not share the power ground path. Place the FREQ resistor and COMP network close to the IC on a quiet analog ground island tied to AGND.
Select the external MOSFET for Vds rating above peak switching node voltage (output voltage plus flyback spikes), and verify Rds(on) at the controller gate-drive level. The 85% maximum duty cycle limits very high boost ratios at low input - compute D = 1 - VIN/VOUT at minimum input and confirm margin. Size the current sense resistor for cycle-by-cycle limit below inductor saturation current.
Do not omit the SS soft-start capacitor - without it, inrush at startup can trip the current limit and cause hiccup behavior. When using the frequency sync function, ensure the synchronization pulse conforms to datasheet timing. For deep shutdown, drive the SHUTDOWN pin below the datasheet threshold; floating it can leave the part in an indeterminate state.
Informations de conformité
NOPB suffix denotes No-Pb lead-free TI offering. For automotive AEC-Q100 qualification, use LM3481QMMX/NOPBQ1. Halogen-free and conflict minerals status not confirmed in provided data.
