Analog Devices

LT1131CNW - 5/4 RS232 Transceiver | Analog Devices

Référence : LT1131CNW ✓ Actif
5 V Vdss 28-pin PDIP Package
MOQ : 1 |

LT1131CNW Présentation

Analog Devices LT1131CNW is a 5/4 RS-232 transceiver designed for low-power, low-voltage communications equipment. The device combines five driver outputs and four receiver inputs in a 28-pin PDIP package, making it suitable for systems that require multiple serial data channels and limited board space. The verified product listing identifies the LT1131CNW as a 28-pin PDIP RS232 transceiver from Analog Devices.

An RS-232 transceiver is an interface IC that converts logic-level signals between a digital system and RS-232 differential signaling. The transmitter section converts digital data into RS-232-compatible outputs, while the receiver section converts incoming RS-232 signals into digital logic levels. A 5/4 configuration means five drivers share the package with four receivers, allowing designers to support several communications ports or mixed control and data links.

The LT1131 family is associated with Advanced Low Power 5V RS232 Drivers/Receivers with Small Package Size. The LT1131CNW is offered in a through-hole PDIP package, which can simplify prototyping, inspection, and repair compared with a surface-mount package. The commercial temperature grade and through-hole terminal form make the part relevant to industrial-control, instrumentation, embedded-console, and legacy peripheral designs.

The LT1131CNW is useful where multiple RS-232 channels are required but board area and power consumption must be controlled. Because the device is a multi-channel interface rather than a power semiconductor, no safe-operating-area chart applies. Designers should verify electrical limits, receiver thresholds, driver slew behavior, supply requirements, and pin assignments against the manufacturer datasheet before laying out a new circuit.

Typical uses include RS-232 port expansion, industrial test equipment, serial adapters, programmable controllers, and embedded systems that retain a legacy communication interface. The 28-pin PDIP footprint is also convenient for through-hole industrial control boards where a compact surface-mount package would be inconvenient to assemble.

The most important design step is to preserve the correct pin mapping and bypass-capacitor layout when creating a replacement board. Place required decoupling capacitors close to the supply pins, route each RS-232 driver and receiver according to the datasheet, and allow adequate signal-transition headroom for the selected data rate. This page combines the verified package and product classification with practical selection, replacement, and layout guidance.

Alternatives de remplacement direct pour LT1131CNW — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

LT1131CN

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 28-PDIP
Same 5 V, five-driver, four-receiver RS232 configuration and 28-PDIP package; 0 V nominal supply-voltage difference, with ordering-suffix handling requiring review

📋 Alternative de référence (hors catalogue)

LT1131ACN

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 28-PDIP
Same 5 V, five-driver, four-receiver configuration and 28-PDIP package; 0 V nominal supply-voltage difference, while the temperature-grade designation differs

📋 Alternative de référence (hors catalogue)

LT1131CNW Spécifications

Product Type RS-232 transceiver
Driver Count 5
Receiver Count 4
Configuration 5/4
Tension d'alimentation 5 V
Interface Standard RS-232
Boîtier 28-pin PDIP
Type de montage Through-hole
Number of Terminals 28
Package Shape Rectangular
Temperature Grade Commercial
Product Category Drivers, Receivers, Transceivers
Manufacturer Analog Devices

Guide de configuration des broches du LT1131CNW rectangular

Configuration des broches du LT1131CNW (boîtier rectangular). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier rectangular pour le LT1131CNW

Aucune donnée de brochage détaillée disponible pour LT1131CNW.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

LT1131CNW convient pour 6 applications: Industrial RS-232 Port Expansion, Embedded Console Interface, Serial Test and Measurement Equipment, Legacy Peripheral Adapter, Programmable Instrument Controller, RS-232 Communications Backplane.

🏭

Industrial RS-232 Port Expansion

The LT1131CNW fits industrial controllers that need more outbound serial channels than inbound channels. Its five drivers can operate command or control links, while four receivers can monitor response signals, making the 5/4 arrangement useful for legacy automation equipment. The 28-pin PDIP package is straightforward for through-hole industrial boards and facilitates inspection during maintenance. Because the interface is not isolated, the design must include appropriate common-mode protection and grounding at the connector.

🖥️

Embedded Console Interface

The LT1131CNW is useful in embedded systems that retain a service-console connection alongside other serial peripherals. Five driver outputs can support command, reset, or control lines, and four receiver inputs can collect status signals. Its 5V operation fits legacy control logic, while the through-hole PDIP package simplifies repair and retrofit work. Place the part near the serial connector and include the required supply bypass capacitors to minimize conducted noise.

🔧

Serial Test and Measurement Equipment

The LT1131CNW can support legacy RS-232 test equipment that communicates with several instruments or service ports. The 5/4 configuration provides enough outputs for command buses and dedicated control lines while retaining receivers for status and acknowledgment signals. Its through-hole package works well in laboratory and field-instrument designs where reworkability is valuable. For long cables, place protection at the connector and verify that signal levels meet the receiver thresholds over the full voltage range.

🔧

Legacy Peripheral Adapter

The LT1131CNW is appropriate for adapter boards that bridge older serial peripherals to a modern controller. Multiple driver and receiver channels allow one board to translate several unidirectional control and data lines, reducing the need for separate interface packages. The 28-pin PDIP footprint is advantageous when the adapter must be assembled with through-hole techniques. Validate connector pin assignments, signal direction, and logic polarity before finalizing the PCB because transceiver count alone does not establish compatibility.

📟

Programmable Instrument Controller

The LT1131CNW can serve in programmable instrument controllers that require several RS-232 outputs for equipment control and four inputs for response monitoring. The device consolidates multiple channels into one package and operates from 5V, matching many legacy measurement platforms. Its through-hole construction is useful when instrument controllers are rebuilt rather than manufactured in high volume. Confirm the driver enable and shutdown states in the datasheet so unused channels are left in a defined condition.

🌐

RS-232 Communications Backplane

The LT1131CNW can be used in a communications backplane that carries multiple low-speed control links between equipment modules. Five drivers and four receivers allow asymmetric channel allocation across the board, and the 28-pin PDIP package suits serviceable industrial hardware. To preserve signal quality, route each RS-232 channel as a defined interface, use the ground scheme specified by the manufacturer, and keep external transient devices near connectors rather than beside sensitive circuitry.

What is the LT1131CNW?
The LT1131CNW is an Analog Devices 5/4 RS-232 transceiver packaged in a 28-pin PDIP. It combines five RS-232 driver outputs with four receiver inputs, allowing a digital system to operate several serial links through one interface IC. The verified distributor listing describes it as an RS232 28-PDIP transceiver, while the family description identifies the LT1131 series as a low-power 5V RS-232 driver and receiver family.
What are the key specifications of LT1131CNW that engineers should know?
The LT1131CNW provides five RS-232 drivers, four RS-232 receivers, a 5V supply, and a 28-pin PDIP package. Its through-hole construction supports prototyping, inspection, and repair, while the commercial temperature grade suits standard commercial equipment. The verified listings identify the device as a 5/4 transceiver; detailed drive strength, data rate, receiver thresholds, and current limits should be confirmed in the manufacturer datasheet.
Where to download the LT1131CNW datasheet PDF?
The LT1131 datasheet can be located through the LT1131 document entry linked on this page. The available document index identifies the LT1131A as an Advanced Low Power 5V RS-232 Drivers/Receivers family with small package size. Use the manufacturer datasheet as the controlling document for the final pinout, electrical characteristics, supply-current limits, and recommended application circuits.
Where can I find the LT1131CNW pinout?
The LT1131CNW pin assignments are shown in the manufacturer datasheet under the package and pin-configuration information. The verified listing confirms a 28-pin PDIP package and identifies the device as a 5/4 transceiver. Use the datasheet pin-description table when assigning power, driver outputs, receiver inputs, and enable or shutdown functions; do not infer the complete pin map from the transceiver count alone.
Is the LT1131CNW still available for purchase?
The LT1131CNW is currently offered as an original Analog Devices component, and at least one verified distributor listing shows a purchasable product entry. Current inventory and delivery timing can change, so use the Request a Quote form on this page to request the exact quantity, package condition, lead time, and shipment options needed for your design.
What is the price of LT1131CNW?
The LT1131CNW price depends on quantity, supplier inventory, condition, and requested delivery terms. The verified listings include product pages with pricing and availability information, but they do not expose a qualifying printed quantity-break table for this exact MPN. Submit the required quantity and purchase conditions through the Request a Quote form on this page for a current quotation.
What is the lead time for LT1131CNW?
The LT1131CNW lead time depends on current manufacturer and distributor stock. The verified DigiKey listing states that the part can ship today, but that statement does not guarantee the lead time for every quantity or package condition. Request a quote for the required quantity and use the supplier confirmation for production planning.
Is LT1131CNW in stock?
The LT1131CNW is shown as a purchasable product in the verified distributor results, with one listing stating that it ships today. Inventory is time-sensitive and may differ by quantity and shipment configuration. Use the Request a Quote form on this page to obtain current availability for the exact quantity you need.
How does the LT1131CNW 5/4 configuration work?
The LT1131CNW uses five driver channels for logic-to-RS-232 conversion and four receiver channels for RS-232-to-logic conversion. The five-to-four ratio lets a system support more outbound serial lines than inbound lines while retaining one package. Actual pin enable behavior, grounding requirements, and signal-level limits should be taken from the manufacturer datasheet.
What is the best drop-in replacement for LT1131CNW?
No drop-in replacement can be confirmed from the available cross-reference results because they contain generic search tools rather than a verified candidate with the same 28-pin PDIP footprint, pin mapping, and electrical ratings. Do not substitute solely by receiver count or package name. Use the Request a Quote form for sourcing support, and require a manufacturer pinout and parameter comparison before approving a replacement.
Can LT1131CNW be replaced by a 28-pin RS-232 transceiver?
A 28-pin RS-232 transceiver can replace the LT1131CNW only if it matches the complete pinout, supply voltage, enable logic, receiver thresholds, driver levels, and 5/4 channel arrangement. The verified cross-reference results do not identify a specific drop-in candidate, so package similarity alone is insufficient. Confirm every connection in the manufacturer datasheet before substitution.
When should I choose the LT1131CNW over another RS-232 transceiver?
Choose the LT1131CNW when a design needs five RS-232 drivers and four receivers in a through-hole 28-pin PDIP package. The package is especially useful for prototypes, legacy equipment, and industrial boards where through-hole assembly is preferred. Choose another part if it offers a smaller surface-mount package, automotive qualification, higher speed, isolated interfaces, or a different channel ratio.
Is the LT1131CNW suitable for industrial-control and test equipment?
The LT1131CNW is suitable for industrial-control and test equipment when its commercial temperature grade, 5V operation, and electrical limits fit the operating environment. Its five-driver and four-receiver configuration supports multiple console, instrument, and peripheral links. Confirm supply-current behavior, driver levels, and temperature limits against the manufacturer datasheet before environmental qualification.
What is the difference between LT1131CNW and a surface-mount RS-232 transceiver?
The primary difference is physical construction: the LT1131CNW uses a 28-pin PDIP package, while many modern RS-232 transceivers use surface-mount packages. A surface-mount option may reduce board area, but it generally requires different assembly capability and may have different enable or shutdown functions. Electrical compatibility and pin mapping must be checked separately from package format.
What can replace LT1131CNW?
A suitable LT1131CNW replacement must provide the same 5/4 RS-232 channel arrangement in a pin-compatible 28-pin PDIP package and meet the critical electrical limits. No specific replacement is established by the verified cross-reference results. Treat any candidate as provisional until its manufacturer datasheet confirms pinout, supply, receiver threshold, driver output, and shutdown behavior.
How should the LT1131CNW be laid out on a PCB?
Lay out the LT1131CNW using the manufacturer pin-description and typical-application diagrams, with the 28-pin PDIP footprint matched to the specified row spacing and pin length. Place bypass capacitance close to the supply pins and route RS-232 traces away from sensitive analog or high-speed clock paths. Keep connector-side transient protection close to the external connector and verify ground requirements in the datasheet.

Données de référence d'ingénierie pour LT1131CNW — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the LT1131CNW when a design requires a 5V RS-232 interface with five drivers and four receivers in a 28-pin through-hole PDIP package. It is particularly practical for prototypes, legacy peripherals, industrial test equipment, and serviceable communications boards where through-hole assembly and easy inspection are priorities. Its 5/4 channel arrangement supports systems with more outbound control lines than inbound response lines.

Choose a surface-mount RS-232 transceiver instead when board area, automated assembly, or a smaller footprint is more important than through-hole serviceability. Choose a different 5/4 device when it offers automotive qualification, lower power consumption, higher data rate, improved receiver thresholds, shutdown control, or a package with a verified pin-for-pin match.

No drop-in alternative is presented because the available cross-reference results do not identify a specific part with a verified 28-pin PDIP footprint and confirmed electrical compatibility. Before substituting, compare the complete pinout, supply current, receiver threshold, driver voltage, enable behavior, and temperature range against the manufacturer datasheet. For sourcing support, submit the exact quantity and required package condition through the Request a Quote form.

Comparaison avec les alternatives

Paramètre Ce produit
Brand Analog Devices
Package 28-pin PDIP
Product Type RS-232 transceiver
Driver Count 5
Receiver Count 4
Configuration 5/4
Supply Voltage 5 V
Mounting Type Through-hole
Temperature Grade Commercial
Number of Terminals 28

Notes de conception

Use the manufacturer package drawing to establish the 28-pin PDIP footprint, row spacing, and drill pattern. Keep the IC away from long unprotected RS-232 traces crossing unrelated logic. Place input and output bypassing exactly as shown in the recommended application circuit, and provide a low-impedance ground return for every interface to reduce noise and common-mode errors.

Plan unused driver and receiver pins according to the datasheet rather than leaving their function unstated. Check whether unused outputs require a defined termination and whether unused receiver inputs may float. Because the complete LT1131CNW pin map is not reproduced in the product listing, use the manufacturer pin-description table when assigning PCB nets and validating the final schematic.

Do not treat a generic 28-pin RS-232 transceiver as automatically compatible. The replacement must match the LT1131CNW channel arrangement, supply requirements, receiver thresholds, driver output levels, enable functions, and pin names. Verify both the IC footprint and every electrical connection; otherwise, an apparently similar package can cause reversed data, inactive outputs, or excessive connector current.

Keep external connector protection close to the RS-232 pins and provide a direct chassis-to-ground strategy appropriate to the equipment. This is especially important when long cables enter an industrial enclosure. Separate RS-232 routing from switching supplies, clocks, and precision analog inputs, and verify the completed board with radiated and conducted emissions testing because interface transients can propagate back into the enclosure.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The verified listings identify a commercial-grade Analog Devices product but do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to this commercial RS-232 transceiver classification.

Données vérifiées le : 2026-11-09 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

LT1131CNW datasheet LT1131CNW pinout LT1131CNW datasheet pdf LT1131CNW equivalent LT1131CNW replacement LT1131CNW price LT1131CNW stock Analog Devices LT1131CNW LT1131CNW 28-pin PDIP LT1131CNW RS232 transceiver LT1131 5V RS232 transceiver LT1131CNW schematic

Composants & termes associés

Analog Devices LT1131CNW LT1131 LT1131A RS-232 transceiver RS-232 driver RS-232 receiver line transceiver digital interface IC interface IC semiconductor 28-pin PDIP PDIP package through-hole package commercial temperature grade 5 V power supply industrial control test and measurement equipment embedded serial console legacy peripheral adapter communications backplane driver enable receiver threshold
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ