LT1357CN8 - 25MHz 600V/us Voltage-Feedback Op Amp | ADI
Référence : LT1357CN8 ✓ ActifLT1357CN8 Présentation
A voltage-feedback operational amplifier is a general-purpose analog building block that amplifies the difference between its inverting and non-inverting inputs. Within the broader IC hierarchy, it belongs to the amplifier IC class, performs closed-loop signal conditioning, and can operate as a voltage amplifier, current buffer, comparator with an external bias arrangement, or a driver for downstream analog and mixed-signal circuits.
Key characteristics include a 25 MHz gain-bandwidth product, a 600 V/us slew rate, and approximately 30 mA supply current. According to the Analog Devices LT1357 datasheet, the device provides lower supply current, lower input offset voltage, lower input bias current, and higher DC gain than amplifiers with comparable bandwidth. These properties make it useful where accurate small-signal behavior must coexist with rapid large-signal transitions.
The LT1357 uses a voltage-feedback topology optimized for conventional gain-setting networks. Its high speed makes gain-bandwidth and slew-rate limits important in pulse, video, instrumentation, and feedback-control systems. The 8-pin PDIP package supports through-hole assembly and prototyping, while the single-amplifier configuration leaves two spare inputs available for grounding or shielding.
Typical uses include low-level signal conditioning, current-to-voltage conversion, active filtering, analog instrumentation, and pulse-shaping stages. The 600 V/us slew rate supports faster edge reproduction than many general-purpose amplifiers, while the 25 MHz bandwidth covers applications extending into the low megahertz range.
When designing a board around the LT1357CN8, follow the datasheet pinout and decoupling recommendations closely. Keep input and feedback traces short, provide clean supply bypassing, and account for resistor loading when calculating closed-loop gain and bandwidth.
This page consolidates the manufacturer specifications, package details, equivalent-part information, and practical design guidance into one engineering reference for evaluating the LT1357CN8 in new amplifier designs.
Alternatives de remplacement direct pour LT1357CN8 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
LT1357CN8#PBF
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
LT1357CN8 Valeurs maximales et caractéristiques électriques
| Amplifier Type | Voltage Feedback |
| Number of Circuits | 1 circuit |
| Gain-Bandwidth Product | 25 MHz |
| Slew Rate | 600 V/us |
| Courant d'alimentation | 30 mA |
| Boîtier | 8-pin PDIP, 7.62 mm lead pitch |
| Package Length | 7.62 mm |
| Type de montage | Through-hole, PDIP-8 |
| Process Technology | Bipolar complementary processing |
Guide de configuration des broches du LT1357CN8 7.62 mm
Configuration des broches du LT1357CN8 (boîtier 7.62 mm). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour LT1357CN8.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
LT1357CN8 convient pour 6 applications: Fast Instrumentation Signal Conditioning, Pulse and Edge Signal Amplification, Active Filtering and Frequency Shaping, Current-to-Voltage Conversion, Video and Wideband Analog Buffering, Industrial Feedback Control Loops.
Fast Instrumentation Signal Conditioning
The LT1357CN8 fits precision analog front ends that must amplify sensor signals without sacrificing large-signal response. Its 25 MHz gain-bandwidth product supports moderate closed-loop gains, and the 600 V/us slew rate allows the amplifier to reproduce waveform edges that many general-purpose op amps would slow down. Place the device at the first gain stage, keep the input route short, and use the datasheet feedback and decoupling layouts to preserve stability. Confirm the input-common-mode range, offset voltage, and bias current against the sensor output before committing to the design.
Recommandé
Pulse and Edge Signal Amplification
The LT1357CN8 is useful where the information carried by pulse edges matters more than the steady-state level alone. Its 600 V/us slew rate provides fast large-signal transitions, while the 25 MHz gain-bandwidth product accommodates moderate closed-loop gain and higher-frequency content. Use it for pulse conditioning, clock-buffer amplification, and waveform cleanup when the output must follow the input without excessive edge rounding. Verify output swing, output-current capability, and stability at the intended gain, and provide local supply bypassing to keep the fast switching currents from disturbing adjacent circuitry.
Recommandé
Active Filtering and Frequency Shaping
The LT1357CN8 can implement active filters whose useful frequency range extends beyond general-purpose amplifiers. The 25 MHz gain-bandwidth product leaves bandwidth margin for moderate-gain filter sections, and the 600 V/us slew rate improves large-signal behavior in filters that process waveforms with significant amplitude. Place the amplifier and feedback components close together, use short ground returns, and avoid long parasitic loops around high-value resistors. Check the amplifier's open-loop response and noise behavior against the filter's passband and stopband targets.
Recommandé
Current-to-Voltage Conversion
The LT1357CN8 is appropriate for converting a small current-derived voltage into a larger analog signal with a wide bandwidth. Its high DC gain and 25 MHz gain-bandwidth product support transimpedance-style feedback arrangements, while the 600 V/us slew rate helps preserve rapidly changing current signals. Use a feedback resistor and compensation capacitor selected from the target transimpedance gain and bandwidth. Keep the input node physically small, protect the input from stray capacitance, and verify the input bias current because it creates an offset error in the converted voltage.
Recommandé
Video and Wideband Analog Buffering
The LT1357CN8 can buffer low-level video or wideband analog signals when conventional op amps introduce excessive edge-rate limitation. The 25 MHz bandwidth covers low-megahertz signal ranges, and the 600 V/us slew rate reduces large-signal distortion in square-wave and pulsed-video paths. Use the device as an inverting or non-inverting buffer with gain-setting resistors that keep the closed-loop bandwidth appropriate for the chosen gain. Account for output-swing limits and stable feedback layout, and evaluate group-delay and settling behavior if the application has waveform-integrity requirements.
Recommandé
Industrial Feedback Control Loops
The LT1357CN8 fits control and feedback loops that require rapid correction of an error signal. Its 600 V/us slew rate allows a substantial output change to occur quickly, and the 25 MHz gain-bandwidth product provides the loop bandwidth needed to follow faster system dynamics. Position the amplifier close to the feedback summing node, keep compensation components compact, and avoid routing the high-speed output through long traces. Confirm whether the loop requires a unity-gain-stable configuration or a specific compensation network before finalizing the gain and stability design.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour LT1357CN8 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | LT1357CN8#PBF |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 8-pin PDIP | 8-pin PDIP |
| Amplifier Type | Voltage Feedback | Voltage Feedback |
| Number of Circuits | 1 circuit | 1 circuit |
| Gain-Bandwidth Product | 25 MHz | 25 MHz |
| Slew Rate | 600 V/us | 600 V/us |
| Supply Current | 30 mA | 30 mA |
| Process Technology | Bipolar complementary processing | Bipolar complementary processing |
| Finish Designation | Standard ordering designation | Lead-free finish designation |
Principaux différenciateurs
- High slew rate for a voltage-feedback amplifier (vs LT1357CN8#PBF)
- Single-amplifier PDIP implementation (vs LT1357CN8#PBF)
- Bipolar complementary processing (vs LT1357CN8#PBF)
Notes de conception
Route the non-inverting input, inverting input, feedback components, and output as a compact analog island because the LT1357's 25 MHz bandwidth and 600 V/us slew rate can amplify parasitic effects. Keep the input node compact, avoid running the feedback trace beside the input trace, and use a single ground reference without long return paths. Place supply-bypass capacitors at the pins specified in the manufacturer datasheet.
Do not select the amplifier from bandwidth alone. Check the output-voltage swing, output-current capability, input-common-mode range, offset voltage, bias current, and stability at the intended closed-loop gain. A 600 V/us slew rate cannot create additional output voltage range, and a high gain-bandwidth product does not guarantee acceptable noise or accuracy. Validate the complete operating point against the LT1357 datasheet before layout release.
For fast edges, treat power return and decoupling as part of the signal path. Keep the input and feedback connections away from high-current outputs and switching nodes, and evaluate the board with a scope for ringing, overshoot, and settling. The LT1357 combines voltage-feedback behavior with current-feedback-like slewing characteristics, so follow the manufacturer feedback-component recommendations rather than applying generic resistor values without stability checks.
Informations de conformité
The #PBF ordering suffix identifies a lead-free finish designation, but the product records do not explicitly state RoHS, REACH, halogen-free, or conflict-minerals status. The device is an analog amplifier and is not presented as an AEC-Q100-qualified automotive part.