Analog Devices

LT1357CN8 - 25MHz 600V/us Voltage-Feedback Op Amp | ADI

N.º de pieza: LT1357CN8 ✓ Activo
30 mA Vdss 8-pin PDIP, 7.62 mm lead pitch Package
MOQ: 1 |

LT1357CN8 Descripción general

The Analog Devices LT1357CN8 is a single voltage-feedback operational amplifier with a 25 MHz gain-bandwidth product and a 600 V/us slew rate, housed in an 8-pin PDIP package. It uses advanced bipolar complementary processing and combines the topology of a voltage-feedback amplifier with the slewing characteristics of a current-feedback amplifier.

A voltage-feedback operational amplifier is a general-purpose analog building block that amplifies the difference between its inverting and non-inverting inputs. Within the broader IC hierarchy, it belongs to the amplifier IC class, performs closed-loop signal conditioning, and can operate as a voltage amplifier, current buffer, comparator with an external bias arrangement, or a driver for downstream analog and mixed-signal circuits.

Key characteristics include a 25 MHz gain-bandwidth product, a 600 V/us slew rate, and approximately 30 mA supply current. According to the Analog Devices LT1357 datasheet, the device provides lower supply current, lower input offset voltage, lower input bias current, and higher DC gain than amplifiers with comparable bandwidth. These properties make it useful where accurate small-signal behavior must coexist with rapid large-signal transitions.

The LT1357 uses a voltage-feedback topology optimized for conventional gain-setting networks. Its high speed makes gain-bandwidth and slew-rate limits important in pulse, video, instrumentation, and feedback-control systems. The 8-pin PDIP package supports through-hole assembly and prototyping, while the single-amplifier configuration leaves two spare inputs available for grounding or shielding.

Typical uses include low-level signal conditioning, current-to-voltage conversion, active filtering, analog instrumentation, and pulse-shaping stages. The 600 V/us slew rate supports faster edge reproduction than many general-purpose amplifiers, while the 25 MHz bandwidth covers applications extending into the low megahertz range.

When designing a board around the LT1357CN8, follow the datasheet pinout and decoupling recommendations closely. Keep input and feedback traces short, provide clean supply bypassing, and account for resistor loading when calculating closed-loop gain and bandwidth.

This page consolidates the manufacturer specifications, package details, equivalent-part information, and practical design guidance into one engineering reference for evaluating the LT1357CN8 in new amplifier designs.

Alternativas directas para LT1357CN8 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

LT1357CN8#PBF

✅ Sustitución directa
📦 8-pin PDIP
Lead-free finish designation; electrical ratings and PDIP-8 footprint match the LT1357CN8 with no quantified electrical change

📋 Alternativa de referencia (no en el catálogo)

LT1357CN8 Valores máximos y características eléctricas

Amplifier Type Voltage Feedback
Number of Circuits 1 circuit
Gain-Bandwidth Product 25 MHz
Slew Rate 600 V/us
Corriente de alimentación 30 mA
Encapsulado 8-pin PDIP, 7.62 mm lead pitch
Package Length 7.62 mm
Tipo de montaje Through-hole, PDIP-8
Process Technology Bipolar complementary processing

Guía de configuración de pines de LT1357CN8 7.62 mm

Configuración de pines para LT1357CN8 (encapsulado 7.62 mm). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado 7.62 mm para LT1357CN8

No hay datos detallados de patillaje disponibles para LT1357CN8.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

LT1357CN8 es adecuado para 6 aplicacións: Fast Instrumentation Signal Conditioning, Pulse and Edge Signal Amplification, Active Filtering and Frequency Shaping, Current-to-Voltage Conversion, Video and Wideband Analog Buffering, Industrial Feedback Control Loops.

🔧

Fast Instrumentation Signal Conditioning

The LT1357CN8 fits precision analog front ends that must amplify sensor signals without sacrificing large-signal response. Its 25 MHz gain-bandwidth product supports moderate closed-loop gains, and the 600 V/us slew rate allows the amplifier to reproduce waveform edges that many general-purpose op amps would slow down. Place the device at the first gain stage, keep the input route short, and use the datasheet feedback and decoupling layouts to preserve stability. Confirm the input-common-mode range, offset voltage, and bias current against the sensor output before committing to the design.

⚡

Pulse and Edge Signal Amplification

The LT1357CN8 is useful where the information carried by pulse edges matters more than the steady-state level alone. Its 600 V/us slew rate provides fast large-signal transitions, while the 25 MHz gain-bandwidth product accommodates moderate closed-loop gain and higher-frequency content. Use it for pulse conditioning, clock-buffer amplification, and waveform cleanup when the output must follow the input without excessive edge rounding. Verify output swing, output-current capability, and stability at the intended gain, and provide local supply bypassing to keep the fast switching currents from disturbing adjacent circuitry.

🌐

Active Filtering and Frequency Shaping

The LT1357CN8 can implement active filters whose useful frequency range extends beyond general-purpose amplifiers. The 25 MHz gain-bandwidth product leaves bandwidth margin for moderate-gain filter sections, and the 600 V/us slew rate improves large-signal behavior in filters that process waveforms with significant amplitude. Place the amplifier and feedback components close together, use short ground returns, and avoid long parasitic loops around high-value resistors. Check the amplifier's open-loop response and noise behavior against the filter's passband and stopband targets.

📉

Current-to-Voltage Conversion

The LT1357CN8 is appropriate for converting a small current-derived voltage into a larger analog signal with a wide bandwidth. Its high DC gain and 25 MHz gain-bandwidth product support transimpedance-style feedback arrangements, while the 600 V/us slew rate helps preserve rapidly changing current signals. Use a feedback resistor and compensation capacitor selected from the target transimpedance gain and bandwidth. Keep the input node physically small, protect the input from stray capacitance, and verify the input bias current because it creates an offset error in the converted voltage.

📺

Video and Wideband Analog Buffering

The LT1357CN8 can buffer low-level video or wideband analog signals when conventional op amps introduce excessive edge-rate limitation. The 25 MHz bandwidth covers low-megahertz signal ranges, and the 600 V/us slew rate reduces large-signal distortion in square-wave and pulsed-video paths. Use the device as an inverting or non-inverting buffer with gain-setting resistors that keep the closed-loop bandwidth appropriate for the chosen gain. Account for output-swing limits and stable feedback layout, and evaluate group-delay and settling behavior if the application has waveform-integrity requirements.

🏭

Industrial Feedback Control Loops

The LT1357CN8 fits control and feedback loops that require rapid correction of an error signal. Its 600 V/us slew rate allows a substantial output change to occur quickly, and the 25 MHz gain-bandwidth product provides the loop bandwidth needed to follow faster system dynamics. Position the amplifier close to the feedback summing node, keep compensation components compact, and avoid routing the high-speed output through long traces. Confirm whether the loop requires a unity-gain-stable configuration or a specific compensation network before finalizing the gain and stability design.

Resumen de productos recomendados

LT1358 Dual-amplifier member of the LT1357 high-speed family Se usa en: Fast Instrumentation Signal Conditioning, Pulse and Edge Signal Amplification, Current-to-Voltage Conversion, Video and Wideband Analog Buffering LT1359 Quad-amplifier member of the LT1357 high-speed family Se usa en: Fast Instrumentation Signal Conditioning, Current-to-Voltage Conversion, Industrial Feedback Control Loops LT1357CN8#PBF Lead-free ordering option of the same amplifier Se usa en: Pulse and Edge Signal Amplification LT1360 Higher-bandwidth member of the related LT1360 through LT1365 family Se usa en: Active Filtering and Frequency Shaping, Industrial Feedback Control Loops LT1361 Related high-speed amplifier family option Se usa en: Active Filtering and Frequency Shaping LT1357CS8 Same-family SOIC option for compact surface-mount designs Se usa en: Video and Wideband Analog Buffering
What is the operating voltage range of the LT1357CN8?
The LT1357CN8 is designed for bipolar supply operation, but its exact minimum and maximum supply voltages must be taken from the Analog Devices LT1357 datasheet. The device is a single voltage-feedback amplifier with a 25 MHz gain-bandwidth product and a 600 V/us slew rate. Confirm the supply limits against your signal amplitude, output swing, and output-current requirements before the PCB layout is released.
What are the key specifications of LT1357CN8 that engineers should know?
The LT1357CN8 is a single voltage-feedback operational amplifier with a 25 MHz gain-bandwidth product, 600 V/us slew rate, and approximately 30 mA supply current. It uses advanced bipolar complementary processing and is packaged in an 8-pin PDIP. According to the Analog Devices LT1357 datasheet, it offers lower supply current, lower input offset voltage, lower input bias current, and higher DC gain than amplifiers with comparable bandwidth.
Where can I download the LT1357CN8 datasheet PDF?
The official LT1357 datasheet PDF is hosted by Analog Devices at analog.com/media/en/technical-documentation/data-sheets/1357fa.pdf. It contains the recommended operating conditions, electrical characteristics, pin configuration, and application information for the LT1357 family. Use this manufacturer document for the definitive supply-voltage limits, offset voltage, input bias current, and thermal data when qualifying the part.
Where can I find the LT1357CN8 pinout?
The LT1357CN8 pin assignment is shown in the pin-configuration section of the Analog Devices LT1357 datasheet. The device is an 8-pin PDIP and uses a conventional single-amplifier arrangement with inverting, non-inverting, supply, and ground connections. Use the manufacturer pin diagram directly when assigning PCB tracks rather than relying on a generic DIP drawing.
Is the LT1357CN8 suitable for audio and video signal conditioning?
The LT1357CN8 is suitable for many audio, video, instrumentation, and feedback-control signal-conditioning stages because its 25 MHz gain-bandwidth product and 600 V/us slew rate provide a useful combination of bandwidth and edge rate. The LT1357 datasheet identifies the device as a voltage-feedback amplifier with current-feedback-like slewing characteristics. Actual noise, distortion, settling time, and output-swing limits should be checked for the intended signal path.
What can replace an LT1357CN8 on an existing PCB?
A replacement should use the same PDIP-8 footprint, the same inverting and non-inverting input arrangement, and a compatible supply range. The LT1357CN8#PBF ordering code is the closest identified match because it retains the same LT1357 electrical device and PDIP-8 outline while adding the lead-free finish. Any other substitute must be checked for pin order, supply limits, offset voltage, bias current, stability, and slew-rate requirements.
Is the LT1357CN8 the same as the LT1357CN8#PBF?
The LT1357CN8#PBF is the lead-free ordering designation associated with the LT1357CN8 device. Both identify the same 8-pin PDIP high-speed voltage-feedback amplifier family, with a 25 MHz gain-bandwidth product and 600 V/us slew rate. The relevant practical distinction is the finish and orderable suffix, so an existing PCB can generally accept the #PBF version when its mechanical outline and electrical requirements remain unchanged.
When should I choose the LT1357CN8 over a general-purpose operational amplifier?
Choose the LT1357CN8 when the signal path needs substantially faster edges than a general-purpose amplifier can provide. Its 600 V/us slew rate reduces large-signal rise-time limitation, while the 25 MHz gain-bandwidth product supports operation at higher frequencies and closed-loop gains than many precision-oriented amplifiers. Choose a lower-bandwidth device instead when the signal is slow and minimizing cost or supply dissipation is the priority.
Is the LT1357CN8 suitable for instrumentation amplifier front ends?
The LT1357CN8 can serve as an active element in fast instrumentation and signal-conditioning circuits because of its 25 MHz bandwidth, 600 V/us slew rate, and high DC gain. It can also be used for current-to-voltage conversion, filtering, and feedback-control loops. Its bipolar construction and relatively low input bias current are advantageous, but offset voltage, noise, input-common-mode range, and stability requirements must be verified for the selected gain.
What is the difference between voltage feedback and current feedback for the LT1357CN8?
The LT1357CN8 is a voltage-feedback amplifier, meaning its closed-loop gain is normally set by resistors and it retains the familiar inverting and non-inverting input behavior. According to the Analog Devices LT1357 datasheet, its internal topology combines voltage-feedback characteristics with the slewing behavior of a current-feedback amplifier. This distinction matters because compensation, stability, and gain-bandwidth behavior must be evaluated using the voltage-feedback model.
How much supply current does the LT1357CN8 consume?
The LT1357CN8 is listed with approximately 30 mA supply current. According to the Analog Devices LT1357 datasheet, the LT1357 family was designed to achieve lower supply current than amplifiers with comparable bandwidth while also providing lower input offset voltage, lower input bias current, and higher DC gain. Include this current in system power budgets and confirm whether the relevant datasheet value is measured per amplifier or across both supply rails.
Where can I buy LT1357CN8 online?
Use the Request a Quote form on this page to request LT1357CN8 pricing, current inventory, minimum order quantity, and lead time. The quote form provides a single channel for obtaining a current commercial response and avoids stale pricing information. Confirm the exact ordering suffix needed by your assembly, particularly whether the lead-free #PBF version is required.
What is the price of the LT1357CN8?
Submit the LT1357CN8 inquiry through the Request a Quote form on this page for a current price, quantity-break review, and availability confirmation. Commercial terms can change with demand, package configuration, and order volume, so a live quotation is more reliable than a static price reference. Include your target quantities and required delivery timing in the request.
What is the lead time for LT1357CN8?
Request the current LT1357CN8 lead time with the Request a Quote form on this page. Lead time depends on the selected ordering code, order quantity, and current factory and distribution conditions. When requesting a quotation, state whether you need the standard LT1357CN8 designation or the lead-free LT1357CN8#PBF ordering code and provide your planned delivery schedule.
Is the LT1357CN8 in stock?
Current LT1357CN8 stock should be confirmed through the Request a Quote form on this page. Include your required quantity, acceptable packaging, and target ship date in the request so the commercial response reflects an executable order rather than a general availability statement. The lead-free #PBF ordering code may have a different stock position from the non-PBF designation.
What is the best Analog Devices equivalent for the LT1357CN8?
The closest identified Analog Devices ordering option is the LT1357CN8#PBF, which preserves the LT1357 electrical architecture, 25 MHz gain-bandwidth product, 600 V/us slew rate, and 8-pin PDIP outline while providing a lead-free finish. If a different amplifier family is considered, verify supply range, input offset voltage, bias current, output drive, stability, and pin mapping rather than treating bandwidth or slew rate alone as sufficient.

Datos de referencia de ingeniería para LT1357CN8 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the LT1357CN8 when you need a high-speed, single voltage-feedback amplifier with a 25 MHz gain-bandwidth product and 600 V/us slew rate in an 8-pin PDIP package. It is particularly appropriate for instrumentation, pulse conditioning, active filtering, and fast feedback loops. Select the LT1357CN8#PBF version when a lead-free finish is required; it preserves the same electrical ratings and PDIP footprint. Consider a lower-bandwidth general-purpose amplifier when signal edges are slow, power consumption is the priority, or a cost-focused design does not need the LT1357's speed. Verify supply range, output swing, input-common-mode limits, stability, and offset requirements before making a substitution. No cross-brand part is recommended because the cross-reference material does not identify another manufacturer with a confirmed pin-compatible PDIP-8 footprint and equivalent operating characteristics.

Comparación con alternativas

Parámetro Este producto LT1357CN8#PBF
Brand Analog Devices Analog Devices
Package 8-pin PDIP 8-pin PDIP
Amplifier Type Voltage Feedback Voltage Feedback
Number of Circuits 1 circuit 1 circuit
Gain-Bandwidth Product 25 MHz 25 MHz
Slew Rate 600 V/us 600 V/us
Supply Current 30 mA 30 mA
Process Technology Bipolar complementary processing Bipolar complementary processing
Finish Designation Standard ordering designation Lead-free finish designation

Diferenciadores clave

  • High slew rate for a voltage-feedback amplifier (frente a LT1357CN8#PBF)
  • Single-amplifier PDIP implementation (frente a LT1357CN8#PBF)
  • Bipolar complementary processing (frente a LT1357CN8#PBF)

Notas de diseño

Route the non-inverting input, inverting input, feedback components, and output as a compact analog island because the LT1357's 25 MHz bandwidth and 600 V/us slew rate can amplify parasitic effects. Keep the input node compact, avoid running the feedback trace beside the input trace, and use a single ground reference without long return paths. Place supply-bypass capacitors at the pins specified in the manufacturer datasheet.

Do not select the amplifier from bandwidth alone. Check the output-voltage swing, output-current capability, input-common-mode range, offset voltage, bias current, and stability at the intended closed-loop gain. A 600 V/us slew rate cannot create additional output voltage range, and a high gain-bandwidth product does not guarantee acceptable noise or accuracy. Validate the complete operating point against the LT1357 datasheet before layout release.

For fast edges, treat power return and decoupling as part of the signal path. Keep the input and feedback connections away from high-current outputs and switching nodes, and evaluate the board with a scope for ringing, overshoot, and settling. The LT1357 combines voltage-feedback behavior with current-feedback-like slewing characteristics, so follow the manufacturer feedback-component recommendations rather than applying generic resistor values without stability checks.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The #PBF ordering suffix identifies a lead-free finish designation, but the product records do not explicitly state RoHS, REACH, halogen-free, or conflict-minerals status. The device is an analog amplifier and is not presented as an AEC-Q100-qualified automotive part.

Datos verificados el: 2026-11-09 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

LT1357CN8 datasheet LT1357CN8 datasheet pdf LT1357CN8 pinout LT1357CN8 specifications LT1357CN8 equivalent LT1357CN8 replacement LT1357CN8 drop-in substitute LT1357CN8 PDIP-8 op amp LT1357 25MHz 600V/us amplifier Analog Devices LT1357CN8 LT1357CN8 price LT1357CN8 stock LT1357CN8 vs LT1357CN8#PBF LT1357 instrumentation amplifier application

Componentes & términos relacionados

Analog Devices Linear Technology LT1357CN8 LT1357CN8#PBF LT1357 LT1358 LT1359 LT1357CS8 LT1360 voltage-feedback operational amplifier current-feedback operational amplifier op amp amplifier IC analog IC semiconductor gain-bandwidth product slew rate bipolar complementary processing input offset voltage input bias current open-loop gain feedback control active filter instrumentation PDIP-8 through-hole package surface mount SMD
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ