M29F200FT55M3E2 - 2Mbit 55ns 5V NOR Flash SOIC-44 | Micron
Référence : M29F200FT55M3E2 ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $5.9 | $5,90 |
| 10 | $5.31 | $53,10 |
| 100 | $4.72 | $472,00 |
| 500 | $4.25 | $2 125,00 |
| 1 000 | $3.83 | $3 830,00 |
M29F200FT55M3E2 Présentation
A parallel NOR Flash memory is a non-volatile storage device in which cells are accessed over a wide parallel address and data bus, allowing a processor to read individual bytes or words directly and execute code in place (XIP). Within the memory hierarchy, NOR Flash sits alongside DRAM and SRAM as code storage: it retains firmware without power and offers fast random access, unlike serial NAND Flash which accesses data in pages. NOR Flash is commonly organized as a voltage regulator-adjacent power-rail-independent boot device for embedded CPUs.
Key features of the M29F200FT55M3E2 include a single 5V supply (VCC), a 55 ns access time suitable for zero-wait-state code execution, 128K words x 16 bits organization with byte/word mode flexibility, and a top boot block sector map that protects the boot code region from accidental erase. The embedded program/erase controller runs byte/word program and block erase algorithms automatically, offloading timing control from the host CPU.
Technically, the device belongs to the STMicroelectronics-inherited M29F family that Micron acquired, using floating-gate NOR cell technology with an on-chip program/erase state machine and status polling. Sector erase and program operations are command-set driven, and the top boot block arrangement keeps the reset/startup vector in a hardware-protectable region.
Typical applications include firmware boot storage for industrial controllers, set-top boxes, telecom line cards, and automotive/industrial modules that require 5V logic compatibility and in-place code execution.
When designing with this part, budget for sector erase times of several hundred milliseconds and verify VPP-free program operation within the 5V tolerance band.
This page synthesizes distributor pricing context, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.
Alternatives de remplacement direct pour M29F200FT55M3E2 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec M29F200FT55M3E2 (même facteur de forme et même empreinte) — différant par Memory Type, Organization, Boot Block Architecture, Package, Packaging.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
M29F200FT55M3F2
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$1.85 / unité
Voir la fiche technique →M29F200FB55M3E2
✅ Remplacement direct✓ En stock
Contactez-nous pour le prix
Voir la fiche technique →M29F200FB55M3F2
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
M29F200FT55N3F2
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
Contactez-nous pour le prix
Voir la fiche technique →M29F200FB55N3F2
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$4.2 / unité
Voir la fiche technique →M29F200FT55M3E2 Valeurs maximales et caractéristiques électriques
| Type de mémoire | NOR Flash (Parallel) |
| Taille de mémoire | 2 Mbit (2097 kbits) |
| Organisation de la mémoire | 128K x 16 bits |
| Access Time | 55 ns |
| Supply Voltage (VCC) | 5 V |
| Interface | Parallel |
| Boot Block Architecture | Top Boot Block |
| Program / Erase Controller | Embedded byte/word program algorithms |
| Température de fonctionnement | -40C to +125C |
| Package Type | 44-SO (SOP-44) |
| Type de montage | Surface Mount |
| Memory Cell Type | SLC (Single-Level Cell) |
| Erase Block Structure | Boot block sector architecture |
| Programming Mode | Byte / Word |
| Status Signaling | Data polling / toggle bit |
| Statut RoHS | unknown |
| Statut du cycle de vie | End of Life (EOL) - last-time-buy / broker market |
Guide de configuration des broches du M29F200FT55M3E2 44-so (sop-44)
Configuration des broches du M29F200FT55M3E2 (boîtier 44-so (sop-44)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour M29F200FT55M3E2.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
M29F200FT55M3E2 convient pour 6 applications: Embedded Boot Code Storage, Industrial PLC and Motor Control Boards, Telecom Line Cards and Network Equipment, Set-Top Box and Consumer Electronics Firmware, Automotive and Instrumentation Modules, Test and Measurement Equipment Firmware.
Embedded Boot Code Storage
The M29F200FT55M3E2 stores the boot firmware for 5V embedded processors, where its top boot block places the reset vector code in a hardware-protectable sector that resists accidental erase during field updates. The 55 ns access time permits zero-wait-state code fetch at power-up, eliminating the need to shadow boot code into RAM before execution. With a 128K x16 word organization, the device provides a full 16-bit data path matching 16-bit MCUs common in industrial controllers. The embedded program/erase controller executes program and erase autonomously, so the host only issues command sequences and polls status. This reduces host software complexity and shortens boot validation cycles in long-lifecycle industrial products.
Recommandé
Industrial PLC and Motor Control Boards
In programmable logic controllers and motor control boards, the M29F200FT55M3E2 provides non-volatile firmware and parameter storage on a 5V rail that matches the rest of the legacy logic. The -40C to +125C operating range covers cabinet-mounted electronics near heat-generating drives, and the 5V parallel NOR architecture tolerates electrically noisy environments better than low-voltage serial memory with reduced noise margins. The top boot block protects the loader while application sectors are reprogrammed in the field via a serial or CAN link. Because the part is EOL, designers sustaining PLC lines should size last-time-buy quantities now or qualify the pin-compatible M29F200FB55M3F2 / FT55M3F2 variants.
Recommandé
Telecom Line Cards and Network Equipment
Telecom line cards historically standardized on 5V parallel NOR for boot and configuration code, and the M29F200FT55M3E2 fits that profile with its single 5V supply, 55 ns access, and word-wide bus. The parallel interface connects directly to legacy backplane controllers without a serial-to-parallel bridge, reducing BOM count on carrier boards where reliability takes priority over density. Hardware boot-block protection ensures the card reboots correctly after firmware rollback, a requirement in NEBS-style equipment. Because access is random at 55 ns, the CPU can execute configuration code in place, shortening card bring-up time during hot-swap or chassis-rescan events in central-office shelves.
Recommandé
Set-Top Box and Consumer Electronics Firmware
Legacy set-top boxes and consumer appliances used 2 to 4 Mbit parallel NOR devices such as the M29F200FT55M3E2 for bootloader and firmware storage. The device's 5V compatibility suits boards combining discrete logic and MCU peripherals that never migrated to 3.3V, and the 128K x16 organization matches 16-bit host buses without glue logic. The embedded program/erase controller allows in-field firmware updates under host control, while the protected boot block guarantees recovery if an update fails mid-write. Designers repairing or re-manufacturing such products should note the EOL status and standardize on the lead-free F2 suffix variants for consistent sourcing and RoHS-aligned rework processes.
Recommandé
Automotive and Instrumentation Modules
Instrument clusters, engine management auxiliaries, and test instrumentation built on 5V logic used parallel NOR Flash like the M29F200FT55M3E2 for calibration tables and diagnostic code. The -40C to +125C temperature rating supports underhood and engine-bay electronics, and the top boot block keeps safety-relevant calibration code in a write-protected sector while measurement logs are updated elsewhere. The 55 ns access time allows table lookups without wait states, preserving real-time loop determinism in closed-loop control. Because these platforms often run 20+ years, sourcing the pin-compatible family variants (M29F200FB55M3F2, M29F200FT55M3F2) is a practical way to sustain fleets of in-service modules.
Recommandé
Test and Measurement Equipment Firmware
Bench instruments and data-acquisition modules from the 5V logic era rely on parallel NOR Flash like the M29F200FT55M3E2 to store operating firmware, factory calibration constants, and user settings. The 55 ns random access supports direct code execution from Flash during measurement sequences, and byte-mode programming lets the host update calibration sectors individually without erasing the whole array. Hardware-protected boot sectors ensure the instrument always boots to a serviceable state even if a field firmware upgrade is interrupted. For service departments maintaining installed instruments, the same-package family variants offer a straightforward, pin-to-pin sourcing path while original stock lasts.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour M29F200FT55M3E2 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | M29F200FT55M3F2 | M29F200FB55M3E2 | M29F200FB55M3F2 | M29F200FT55N3F2 | M29F200FB55N3F2 |
|---|---|---|---|---|---|---|
| Package | 44-SO (SOP-44) | 44-SO (SOP-44) - same | 44-SO (SOP-44) - same | 44-SO (SOP-44) - same | TSOP-48 - same family, different outline | TSOP-48 - same family, different outline |
| Brand | Micron Technology | Micron Technology | Micron Technology | Micron Technology | Micron Technology | Micron Technology |
| Density | 2 Mbit (128K x16) | 2 Mbit | 2 Mbit | 2 Mbit | 2 Mbit | 2 Mbit |
| Access Time | 55 ns | 55 ns | 55 ns | 55 ns | 55 ns | 55 ns |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Boot Block Location | Top boot block | Top boot block | Bottom boot block | Bottom boot block | Top boot block | Bottom boot block |
| Lifecycle Status | EOL | EOL | EOL | EOL | EOL | EOL |
Principaux différenciateurs
- Top boot block protects the reset vector (vs M29F200FB55M3E2)
- Lead-free sourcing option in same footprint (vs M29F200FT55M3F2)
- Fastest grade in the 2Mbit family (vs M29F200FB55M3E2)
Notes de conception
Confirm boot block location before substituting. The T (top) and B (bottom) variants of the M29F200 family are electrically and mechanically identical in the 44-SO package, but the hardware-protected boot sector sits at opposite ends of the memory map. A board whose reset vector expects a top boot block will fail to boot with a bottom boot block part unless firmware is re-linked. Always match the letter code and verify the sector map in the Micron datasheet during qualification.
The device operates from a single 5V supply; design the VCC rail to the datasheet tolerance band and verify inrush plus program/erase current draw across the full -40C to +125C temperature range. During erase operations current consumption rises above read-mode levels, so ensure the 5V regulator can supply worst-case program/erase current without drooping. Decouple VCC with a 0.1uF ceramic close to the package plus bulk capacitance near the board entry point. Estimated: budget for the datasheet ICC values rather than read-mode figures alone.
Keep address and data bus traces as short as practical; at 55 ns access time, a well-matched bus closes timing easily, but long stubbed traces with multiple loads can add reflection-induced delays in legacy multi-drop layouts. Place a 0.1uF decoupling capacitor within 3 mm of each VCC pin. For EOL sustaining designs, document the exact sector map used in firmware so future pin-compatible substitution (T vs B variants) can be audited. Confirm pin-1 dot orientation against the SOP-44 silkscreen during assembly setup.
Lifecycle risk management: this part is EOL. Before committing remaining board builds, verify date codes and lot authenticity from brokers (counterfeit parallel NOR is common in the open market). Buy from franchised distributors when possible, size last-time-buy to cover the product service life, and consider qualifying the identical-footprint F2 suffix variants to broaden the sourcing pool. Keep a golden reference board and programmed sample for incoming-inspection functional testing of broker-sourced lots.
Informations de conformité
Compliance data not present in the provided Verified Web Data. The F2 suffix in the Micron naming convention denotes lead-free versions; the E suffix compliance finish must be confirmed from the Micron product page or datasheet before RoHS-critical use.
